Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: [HOWTO] Installing the latest of Dosbox

  1. #1
    Join Date
    Oct 2004
    Location
    Denmark - Scandinavia
    Beans
    17,619
    Distro
    Ubuntu 13.04 Raring Ringtail

    Post [HOWTO] Installing the latest of Dosbox

    Homepage: Dosbox
    Project page: Dosbox Project Site
    Wiki: Dosbox Wiki Page
    Describtion: DOSBox emulates an Intel x86 PC, complete with sound, graphics, mouse, modem, etc., necessary for running many old DOS games.
    Howto tested on: Edgy x86,


    Check here: http://gaming.gwos.org/e107_plugins/...php?content.39
    Last edited by Artificial Intelligence; March 18th, 2007 at 05:45 PM. Reason: Wrote a better howto on Ubuntu Gamers Arena
    elementary OS Luna
    My Screenshot

  2. #2
    Join Date
    Dec 2005
    Beans
    733
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: [HOWTO] Installing the latest of Dosbox

    Thanks for the How to
    Tt works

  3. #3
    Join Date
    Oct 2005
    Location
    Vancouver, B.C.
    Beans
    289
    Distro
    Ubuntu

    Re: [HOWTO] Installing the latest of Dosbox

    Followed all instructions above. All went fine. But when I go to start dosbox I get this error:
    Code:
    futz@xblade:~$ dosbox
    Exit to error: Can't init SDL No available video device
    If you have an old version of Dosbox installed remove it first.
    Had no older version installed.
    Make sure that your sourcelist is set up correctly
    Not sure what needs to be done there
    your 3D video card is set up correctly and working before advancing further
    Working fine. Beryl works great. 3D games work fine.
    =======================
    Futz's Microcontrollers & Robotics
    =======================

  4. #4
    Join Date
    Oct 2004
    Location
    Denmark - Scandinavia
    Beans
    17,619
    Distro
    Ubuntu 13.04 Raring Ringtail

    Re: [HOWTO] Installing the latest of Dosbox

    1) Your PC specs.
    2) version of ubuntu
    3) attach configure and make output.
    elementary OS Luna
    My Screenshot

  5. #5
    Join Date
    Oct 2005
    Location
    Vancouver, B.C.
    Beans
    289
    Distro
    Ubuntu

    Re: [HOWTO] Installing the latest of Dosbox

    Quote Originally Posted by Artificial Intelligence View Post
    1) Your PC specs.
    1 - Gigabyte GA-965P-DQ6 Mainboard
    1 - Mushkin HP2-6400 2x1GB 4-5-4-11-1T
    1 - Intel Core 2 Duo E6600 Dual Core Conroe 2.40GHZ
    1 - EVGA E-GEFORCE 7950 GT KO 560MHZ PCI-E 512MB


    2) version of ubuntu
    Ubuntu Edgy 6.10


    3) attach configure and make output.
    configure:
    Code:
    futz@xblade:/media/sdc1/download/dosbox-0.70$ ./configure
    checking build system type... i686-pc-linux-gnu
    checking host system type... i686-pc-linux-gnu
    checking target system type... i686-pc-linux-gnu
    checking for a BSD-compatible install... /usr/bin/install -c
    checking whether build environment is sane... yes
    checking for gawk... gawk
    checking whether make sets $(MAKE)... yes
    checking whether make sets $(MAKE)... (cached) yes
    checking for gcc... gcc
    checking for C compiler default output file name... a.out
    checking whether the C compiler works... yes
    checking whether we are cross compiling... no
    checking for suffix of executables... 
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking for style of include used by make... GNU
    checking dependency style of gcc... gcc3
    checking how to run the C preprocessor... gcc -E
    checking for g++... g++
    checking whether we are using the GNU C++ compiler... yes
    checking whether g++ accepts -g... yes
    checking dependency style of g++... gcc3
    checking for a BSD-compatible install... /usr/bin/install -c
    checking for ranlib... ranlib
    checking for sdl-config... /usr/local/bin/sdl-config
    checking for SDL - version >= 1.2.0... yes
    checking for an ANSI C-conforming const... yes
    checking for inline... inline
    checking for grep that handles long lines and -e... /bin/grep
    checking for egrep... /bin/grep -E
    checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    checking for size_t... yes
    checking whether struct tm is in sys/time.h or time.h... time.h
    checking for unsigned char... yes
    checking size of unsigned char... 1
    checking for unsigned short... yes
    checking size of unsigned short... 2
    checking for unsigned int... yes
    checking size of unsigned int... 4
    checking for unsigned long... yes
    checking size of unsigned long... 4
    checking for unsigned long long... yes
    checking size of unsigned long long... 8
    checking for int *... yes
    checking size of int *... 4
    checking if environ can be included... yes
    checking if environ can be linked... yes
    checking for powf in -lm... yes
    checking if compiler allows __attribute__... yes
    checking if compiler allows __builtin_expect... yes
    checking for ALSA CFLAGS... 
    checking for ALSA LDFLAGS...  -lasound -lm -ldl -lpthread
    checking for libasound headers version >= 0.9.0... found.
    checking for snd_ctl_open in -lasound... yes
    checking whether byte ordering is bigendian... no
    checking for target cpu type... x86 compatible
    checking whether x86 dynamic cpu core will be enabled... yes
    checking whether fpu emulation will be enabled... yes
    checking whether x86 assembly fpu core will be enabled... yes
    checking whether to enable unaligned memory access... yes
    checking png.h usability... yes
    checking png.h presence... yes
    checking for png.h... yes
    checking for png_check_sig in -lpng... yes
    checking SDL_net.h usability... no
    checking SDL_net.h presence... no
    checking for SDL_net.h... no
    checking for SDLNet_Init in -lSDL_net... yes
    configure: WARNING: Can't find SDL_net, internal modem and ipx disabled
    checking whether opengl display output will be enabled... checking for main in -lGL... yes
    checking for main in -lopengl32... no
    checking GL/gl.h usability... yes
    checking GL/gl.h presence... yes
    checking for GL/gl.h... yes
    yes
    checking SDL_sound.h usability... no
    checking SDL_sound.h presence... no
    checking for SDL_sound.h... no
    checking for Sound_Init in -lSDL_sound... yes
    checking for Sound_Seek in -lSDL_sound... yes
    configure: WARNING: Can't find libSDL_sound, libSDL_sound support disabled
    checking sys/mman.h usability... yes
    checking sys/mman.h presence... yes
    checking for sys/mman.h... yes
    checking for mprotect... yes
    checking for setpriority support... yes
    configure: creating ./config.status
    config.status: creating Makefile
    config.status: creating src/Makefile
    config.status: creating src/cpu/Makefile
    config.status: creating src/cpu/core_full/Makefile
    config.status: creating src/cpu/core_normal/Makefile
    config.status: creating src/cpu/core_dyn_x86/Makefile
    config.status: creating src/debug/Makefile
    config.status: creating src/dos/Makefile
    config.status: creating src/fpu/Makefile
    config.status: creating src/gui/Makefile
    config.status: creating src/hardware/Makefile
    config.status: creating src/hardware/serialport/Makefile
    config.status: creating src/ints/Makefile
    config.status: creating src/libs/Makefile
    config.status: creating src/libs/zmbv/Makefile
    config.status: creating src/misc/Makefile
    config.status: creating src/shell/Makefile
    config.status: creating src/platform/Makefile
    config.status: creating src/platform/visualc/Makefile
    config.status: creating visualc_net/Makefile
    config.status: creating include/Makefile
    config.status: creating docs/Makefile
    config.status: creating config.h
    config.status: config.h is unchanged
    config.status: executing depfiles commands

    make (warning - this is very large):
    Code:
    futz@xblade:/media/sdc1/download/dosbox-0.70$ make
    make  all-recursive
    make[1]: Entering directory `/media/sdc1/download/dosbox-0.70'
    Making all in src
    make[2]: Entering directory `/media/sdc1/download/dosbox-0.70/src'
    Making all in cpu
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/cpu'
    Making all in core_full
    make[4]: Entering directory `/media/sdc1/download/dosbox-0.70/src/cpu/core_full'
    make[4]: Nothing to be done for `all'.
    make[4]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/cpu/core_full'
    Making all in core_normal
    make[4]: Entering directory `/media/sdc1/download/dosbox-0.70/src/cpu/core_normal'
    make[4]: Nothing to be done for `all'.
    make[4]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/cpu/core_normal'
    Making all in core_dyn_x86
    make[4]: Entering directory `/media/sdc1/download/dosbox-0.70/src/cpu/core_dyn_x86'
    make[4]: Nothing to be done for `all'.
    make[4]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/cpu/core_dyn_x86'
    make[4]: Entering directory `/media/sdc1/download/dosbox-0.70/src/cpu'
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT callback.o -MD -MP -MF ".deps/callback.Tpo" \
              -c -o callback.o `test -f 'callback.cpp' || echo './'`callback.cpp; \
            then mv -f ".deps/callback.Tpo" ".deps/callback.Po"; \
            else rm -f ".deps/callback.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT cpu.o -MD -MP -MF ".deps/cpu.Tpo" \
              -c -o cpu.o `test -f 'cpu.cpp' || echo './'`cpu.cpp; \
            then mv -f ".deps/cpu.Tpo" ".deps/cpu.Po"; \
            else rm -f ".deps/cpu.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT flags.o -MD -MP -MF ".deps/flags.Tpo" \
              -c -o flags.o `test -f 'flags.cpp' || echo './'`flags.cpp; \
            then mv -f ".deps/flags.Tpo" ".deps/flags.Po"; \
            else rm -f ".deps/flags.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT modrm.o -MD -MP -MF ".deps/modrm.Tpo" \
              -c -o modrm.o `test -f 'modrm.cpp' || echo './'`modrm.cpp; \
            then mv -f ".deps/modrm.Tpo" ".deps/modrm.Po"; \
            else rm -f ".deps/modrm.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT core_full.o -MD -MP -MF ".deps/core_full.Tpo" \
              -c -o core_full.o `test -f 'core_full.cpp' || echo './'`core_full.cpp; \
            then mv -f ".deps/core_full.Tpo" ".deps/core_full.Po"; \
            else rm -f ".deps/core_full.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT paging.o -MD -MP -MF ".deps/paging.Tpo" \
              -c -o paging.o `test -f 'paging.cpp' || echo './'`paging.cpp; \
            then mv -f ".deps/paging.Tpo" ".deps/paging.Po"; \
            else rm -f ".deps/paging.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT core_normal.o -MD -MP -MF ".deps/core_normal.Tpo" \
              -c -o core_normal.o `test -f 'core_normal.cpp' || echo './'`core_normal.cpp; \
            then mv -f ".deps/core_normal.Tpo" ".deps/core_normal.Po"; \
            else rm -f ".deps/core_normal.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT core_simple.o -MD -MP -MF ".deps/core_simple.Tpo" \
              -c -o core_simple.o `test -f 'core_simple.cpp' || echo './'`core_simple.cpp; \
            then mv -f ".deps/core_simple.Tpo" ".deps/core_simple.Po"; \
            else rm -f ".deps/core_simple.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT core_dyn_x86.o -MD -MP -MF ".deps/core_dyn_x86.Tpo" \
              -c -o core_dyn_x86.o `test -f 'core_dyn_x86.cpp' || echo './'`core_dyn_x86.cpp; \
            then mv -f ".deps/core_dyn_x86.Tpo" ".deps/core_dyn_x86.Po"; \
            else rm -f ".deps/core_dyn_x86.Tpo"; exit 1; \
            fi
    rm -f libcpu.a
    ar cru libcpu.a callback.o cpu.o flags.o modrm.o core_full.o paging.o core_normal.o core_simple.o core_dyn_x86.o 
    ranlib libcpu.a
    make[4]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/cpu'
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/cpu'
    Making all in debug
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/debug'
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT debug.o -MD -MP -MF ".deps/debug.Tpo" \
              -c -o debug.o `test -f 'debug.cpp' || echo './'`debug.cpp; \
            then mv -f ".deps/debug.Tpo" ".deps/debug.Po"; \
            else rm -f ".deps/debug.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT debug_gui.o -MD -MP -MF ".deps/debug_gui.Tpo" \
              -c -o debug_gui.o `test -f 'debug_gui.cpp' || echo './'`debug_gui.cpp; \
            then mv -f ".deps/debug_gui.Tpo" ".deps/debug_gui.Po"; \
            else rm -f ".deps/debug_gui.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT debug_disasm.o -MD -MP -MF ".deps/debug_disasm.Tpo" \
              -c -o debug_disasm.o `test -f 'debug_disasm.cpp' || echo './'`debug_disasm.cpp; \
            then mv -f ".deps/debug_disasm.Tpo" ".deps/debug_disasm.Po"; \
            else rm -f ".deps/debug_disasm.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT debug_win32.o -MD -MP -MF ".deps/debug_win32.Tpo" \
              -c -o debug_win32.o `test -f 'debug_win32.cpp' || echo './'`debug_win32.cpp; \
            then mv -f ".deps/debug_win32.Tpo" ".deps/debug_win32.Po"; \
            else rm -f ".deps/debug_win32.Tpo"; exit 1; \
            fi
    rm -f libdebug.a
    ar cru libdebug.a debug.o debug_gui.o debug_disasm.o debug_win32.o 
    ranlib libdebug.a
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/debug'
    Making all in dos
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/dos'
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos.o -MD -MP -MF ".deps/dos.Tpo" \
              -c -o dos.o `test -f 'dos.cpp' || echo './'`dos.cpp; \
            then mv -f ".deps/dos.Tpo" ".deps/dos.Po"; \
            else rm -f ".deps/dos.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_devices.o -MD -MP -MF ".deps/dos_devices.Tpo" \
              -c -o dos_devices.o `test -f 'dos_devices.cpp' || echo './'`dos_devices.cpp; \
            then mv -f ".deps/dos_devices.Tpo" ".deps/dos_devices.Po"; \
            else rm -f ".deps/dos_devices.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_execute.o -MD -MP -MF ".deps/dos_execute.Tpo" \
              -c -o dos_execute.o `test -f 'dos_execute.cpp' || echo './'`dos_execute.cpp; \
            then mv -f ".deps/dos_execute.Tpo" ".deps/dos_execute.Po"; \
            else rm -f ".deps/dos_execute.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_files.o -MD -MP -MF ".deps/dos_files.Tpo" \
              -c -o dos_files.o `test -f 'dos_files.cpp' || echo './'`dos_files.cpp; \
            then mv -f ".deps/dos_files.Tpo" ".deps/dos_files.Po"; \
            else rm -f ".deps/dos_files.Tpo"; exit 1; \
            fi
    dos_files.cpp: In function ‘Bit8u FCB_Parsename(Bit16u, Bit16u, Bit8u, char*, Bit8u*)’:
    dos_files.cpp:691: warning: ‘packed’ attribute ignored for field of type ‘FCB_Parsename(Bit16u, Bit16u, Bit8u, char*, Bit8u*)::<anonymous union>::<anonymous struct>’
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_ioctl.o -MD -MP -MF ".deps/dos_ioctl.Tpo" \
              -c -o dos_ioctl.o `test -f 'dos_ioctl.cpp' || echo './'`dos_ioctl.cpp; \
            then mv -f ".deps/dos_ioctl.Tpo" ".deps/dos_ioctl.Po"; \
            else rm -f ".deps/dos_ioctl.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_memory.o -MD -MP -MF ".deps/dos_memory.Tpo" \
              -c -o dos_memory.o `test -f 'dos_memory.cpp' || echo './'`dos_memory.cpp; \
            then mv -f ".deps/dos_memory.Tpo" ".deps/dos_memory.Po"; \
            else rm -f ".deps/dos_memory.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_misc.o -MD -MP -MF ".deps/dos_misc.Tpo" \
              -c -o dos_misc.o `test -f 'dos_misc.cpp' || echo './'`dos_misc.cpp; \
            then mv -f ".deps/dos_misc.Tpo" ".deps/dos_misc.Po"; \
            else rm -f ".deps/dos_misc.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_classes.o -MD -MP -MF ".deps/dos_classes.Tpo" \
              -c -o dos_classes.o `test -f 'dos_classes.cpp' || echo './'`dos_classes.cpp; \
            then mv -f ".deps/dos_classes.Tpo" ".deps/dos_classes.Po"; \
            else rm -f ".deps/dos_classes.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_programs.o -MD -MP -MF ".deps/dos_programs.Tpo" \
              -c -o dos_programs.o `test -f 'dos_programs.cpp' || echo './'`dos_programs.cpp; \
            then mv -f ".deps/dos_programs.Tpo" ".deps/dos_programs.Po"; \
            else rm -f ".deps/dos_programs.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_tables.o -MD -MP -MF ".deps/dos_tables.Tpo" \
              -c -o dos_tables.o `test -f 'dos_tables.cpp' || echo './'`dos_tables.cpp; \
            then mv -f ".deps/dos_tables.Tpo" ".deps/dos_tables.Po"; \
            else rm -f ".deps/dos_tables.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT drives.o -MD -MP -MF ".deps/drives.Tpo" \
              -c -o drives.o `test -f 'drives.cpp' || echo './'`drives.cpp; \
            then mv -f ".deps/drives.Tpo" ".deps/drives.Po"; \
            else rm -f ".deps/drives.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT drive_virtual.o -MD -MP -MF ".deps/drive_virtual.Tpo" \
              -c -o drive_virtual.o `test -f 'drive_virtual.cpp' || echo './'`drive_virtual.cpp; \
            then mv -f ".deps/drive_virtual.Tpo" ".deps/drive_virtual.Po"; \
            else rm -f ".deps/drive_virtual.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT drive_local.o -MD -MP -MF ".deps/drive_local.Tpo" \
              -c -o drive_local.o `test -f 'drive_local.cpp' || echo './'`drive_local.cpp; \
            then mv -f ".deps/drive_local.Tpo" ".deps/drive_local.Po"; \
            else rm -f ".deps/drive_local.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT drive_cache.o -MD -MP -MF ".deps/drive_cache.Tpo" \
              -c -o drive_cache.o `test -f 'drive_cache.cpp' || echo './'`drive_cache.cpp; \
            then mv -f ".deps/drive_cache.Tpo" ".deps/drive_cache.Po"; \
            else rm -f ".deps/drive_cache.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT drive_fat.o -MD -MP -MF ".deps/drive_fat.Tpo" \
              -c -o drive_fat.o `test -f 'drive_fat.cpp' || echo './'`drive_fat.cpp; \
            then mv -f ".deps/drive_fat.Tpo" ".deps/drive_fat.Po"; \
            else rm -f ".deps/drive_fat.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT drive_iso.o -MD -MP -MF ".deps/drive_iso.Tpo" \
              -c -o drive_iso.o `test -f 'drive_iso.cpp' || echo './'`drive_iso.cpp; \
            then mv -f ".deps/drive_iso.Tpo" ".deps/drive_iso.Po"; \
            else rm -f ".deps/drive_iso.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_mscdex.o -MD -MP -MF ".deps/dos_mscdex.Tpo" \
              -c -o dos_mscdex.o `test -f 'dos_mscdex.cpp' || echo './'`dos_mscdex.cpp; \
            then mv -f ".deps/dos_mscdex.Tpo" ".deps/dos_mscdex.Po"; \
            else rm -f ".deps/dos_mscdex.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dos_keyboard_layout.o -MD -MP -MF ".deps/dos_keyboard_layout.Tpo" \
              -c -o dos_keyboard_layout.o `test -f 'dos_keyboard_layout.cpp' || echo './'`dos_keyboard_layout.cpp; \
            then mv -f ".deps/dos_keyboard_layout.Tpo" ".deps/dos_keyboard_layout.Po"; \
            else rm -f ".deps/dos_keyboard_layout.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT cdrom.o -MD -MP -MF ".deps/cdrom.Tpo" \
              -c -o cdrom.o `test -f 'cdrom.cpp' || echo './'`cdrom.cpp; \
            then mv -f ".deps/cdrom.Tpo" ".deps/cdrom.Po"; \
            else rm -f ".deps/cdrom.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT cdrom_ioctl_win32.o -MD -MP -MF ".deps/cdrom_ioctl_win32.Tpo" \
              -c -o cdrom_ioctl_win32.o `test -f 'cdrom_ioctl_win32.cpp' || echo './'`cdrom_ioctl_win32.cpp; \
            then mv -f ".deps/cdrom_ioctl_win32.Tpo" ".deps/cdrom_ioctl_win32.Po"; \
            else rm -f ".deps/cdrom_ioctl_win32.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT cdrom_aspi_win32.o -MD -MP -MF ".deps/cdrom_aspi_win32.Tpo" \
              -c -o cdrom_aspi_win32.o `test -f 'cdrom_aspi_win32.cpp' || echo './'`cdrom_aspi_win32.cpp; \
            then mv -f ".deps/cdrom_aspi_win32.Tpo" ".deps/cdrom_aspi_win32.Po"; \
            else rm -f ".deps/cdrom_aspi_win32.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT cdrom_ioctl_linux.o -MD -MP -MF ".deps/cdrom_ioctl_linux.Tpo" \
              -c -o cdrom_ioctl_linux.o `test -f 'cdrom_ioctl_linux.cpp' || echo './'`cdrom_ioctl_linux.cpp; \
            then mv -f ".deps/cdrom_ioctl_linux.Tpo" ".deps/cdrom_ioctl_linux.Po"; \
            else rm -f ".deps/cdrom_ioctl_linux.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT cdrom_image.o -MD -MP -MF ".deps/cdrom_image.Tpo" \
              -c -o cdrom_image.o `test -f 'cdrom_image.cpp' || echo './'`cdrom_image.cpp; \
            then mv -f ".deps/cdrom_image.Tpo" ".deps/cdrom_image.Po"; \
            else rm -f ".deps/cdrom_image.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT cdrom_ioctl_os2.o -MD -MP -MF ".deps/cdrom_ioctl_os2.Tpo" \
              -c -o cdrom_ioctl_os2.o `test -f 'cdrom_ioctl_os2.cpp' || echo './'`cdrom_ioctl_os2.cpp; \
            then mv -f ".deps/cdrom_ioctl_os2.Tpo" ".deps/cdrom_ioctl_os2.Po"; \
            else rm -f ".deps/cdrom_ioctl_os2.Tpo"; exit 1; \
            fi
    rm -f libdos.a
    ar cru libdos.a dos.o dos_devices.o dos_execute.o dos_files.o dos_ioctl.o dos_memory.o dos_misc.o dos_classes.o dos_programs.o dos_tables.o drives.o drive_virtual.o drive_local.o drive_cache.o drive_fat.o drive_iso.o dos_mscdex.o dos_keyboard_layout.o cdrom.o cdrom_ioctl_win32.o cdrom_aspi_win32.o cdrom_ioctl_linux.o cdrom_image.o cdrom_ioctl_os2.o 
    ranlib libdos.a
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/dos'
    Making all in fpu
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/fpu'
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT fpu.o -MD -MP -MF ".deps/fpu.Tpo" \
              -c -o fpu.o `test -f 'fpu.cpp' || echo './'`fpu.cpp; \
            then mv -f ".deps/fpu.Tpo" ".deps/fpu.Po"; \
            else rm -f ".deps/fpu.Tpo"; exit 1; \
            fi
    rm -f libfpu.a
    ar cru libfpu.a fpu.o 
    ranlib libfpu.a
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/fpu'
    Making all in gui
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/gui'
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT sdlmain.o -MD -MP -MF ".deps/sdlmain.Tpo" \
              -c -o sdlmain.o `test -f 'sdlmain.cpp' || echo './'`sdlmain.cpp; \
            then mv -f ".deps/sdlmain.Tpo" ".deps/sdlmain.Po"; \
            else rm -f ".deps/sdlmain.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT sdl_mapper.o -MD -MP -MF ".deps/sdl_mapper.Tpo" \
              -c -o sdl_mapper.o `test -f 'sdl_mapper.cpp' || echo './'`sdl_mapper.cpp; \
            then mv -f ".deps/sdl_mapper.Tpo" ".deps/sdl_mapper.Po"; \
            else rm -f ".deps/sdl_mapper.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT render.o -MD -MP -MF ".deps/render.Tpo" \
              -c -o render.o `test -f 'render.cpp' || echo './'`render.cpp; \
            then mv -f ".deps/render.Tpo" ".deps/render.Po"; \
            else rm -f ".deps/render.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT render_scalers.o -MD -MP -MF ".deps/render_scalers.Tpo" \
              -c -o render_scalers.o `test -f 'render_scalers.cpp' || echo './'`render_scalers.cpp; \
            then mv -f ".deps/render_scalers.Tpo" ".deps/render_scalers.Po"; \
            else rm -f ".deps/render_scalers.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT midi.o -MD -MP -MF ".deps/midi.Tpo" \
              -c -o midi.o `test -f 'midi.cpp' || echo './'`midi.cpp; \
            then mv -f ".deps/midi.Tpo" ".deps/midi.Po"; \
            else rm -f ".deps/midi.Tpo"; exit 1; \
            fi
    rm -f libgui.a
    ar cru libgui.a sdlmain.o sdl_mapper.o render.o render_scalers.o midi.o 
    ranlib libgui.a
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/gui'
    Making all in hardware
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/hardware'
    Making all in serialport
    Continued next message...
    =======================
    Futz's Microcontrollers & Robotics
    =======================

  6. #6
    Join Date
    Oct 2005
    Location
    Vancouver, B.C.
    Beans
    289
    Distro
    Ubuntu

    Re: [HOWTO] Installing the latest of Dosbox

    make continued:
    Code:
    make[4]: Entering directory `/media/sdc1/download/dosbox-0.70/src/hardware/serialport'
    if g++ -DHAVE_CONFIG_H -I. -I. -I../../..  -I../../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT directserial_win32.o -MD -MP -MF ".deps/directserial_win32.Tpo" \
              -c -o directserial_win32.o `test -f 'directserial_win32.cpp' || echo './'`directserial_win32.cpp; \
            then mv -f ".deps/directserial_win32.Tpo" ".deps/directserial_win32.Po"; \
            else rm -f ".deps/directserial_win32.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../../..  -I../../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT serialdummy.o -MD -MP -MF ".deps/serialdummy.Tpo" \
              -c -o serialdummy.o `test -f 'serialdummy.cpp' || echo './'`serialdummy.cpp; \
            then mv -f ".deps/serialdummy.Tpo" ".deps/serialdummy.Po"; \
            else rm -f ".deps/serialdummy.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../../..  -I../../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT serialport.o -MD -MP -MF ".deps/serialport.Tpo" \
              -c -o serialport.o `test -f 'serialport.cpp' || echo './'`serialport.cpp; \
            then mv -f ".deps/serialport.Tpo" ".deps/serialport.Po"; \
            else rm -f ".deps/serialport.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../../..  -I../../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT softmodem.o -MD -MP -MF ".deps/softmodem.Tpo" \
              -c -o softmodem.o `test -f 'softmodem.cpp' || echo './'`softmodem.cpp; \
            then mv -f ".deps/softmodem.Tpo" ".deps/softmodem.Po"; \
            else rm -f ".deps/softmodem.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../../..  -I../../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT misc_util.o -MD -MP -MF ".deps/misc_util.Tpo" \
              -c -o misc_util.o `test -f 'misc_util.cpp' || echo './'`misc_util.cpp; \
            then mv -f ".deps/misc_util.Tpo" ".deps/misc_util.Po"; \
            else rm -f ".deps/misc_util.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../../..  -I../../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT directserial_os2.o -MD -MP -MF ".deps/directserial_os2.Tpo" \
              -c -o directserial_os2.o `test -f 'directserial_os2.cpp' || echo './'`directserial_os2.cpp; \
            then mv -f ".deps/directserial_os2.Tpo" ".deps/directserial_os2.Po"; \
            else rm -f ".deps/directserial_os2.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../../..  -I../../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT directserial_posix.o -MD -MP -MF ".deps/directserial_posix.Tpo" \
              -c -o directserial_posix.o `test -f 'directserial_posix.cpp' || echo './'`directserial_posix.cpp; \
            then mv -f ".deps/directserial_posix.Tpo" ".deps/directserial_posix.Po"; \
            else rm -f ".deps/directserial_posix.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../../..  -I../../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT nullmodem.o -MD -MP -MF ".deps/nullmodem.Tpo" \
              -c -o nullmodem.o `test -f 'nullmodem.cpp' || echo './'`nullmodem.cpp; \
            then mv -f ".deps/nullmodem.Tpo" ".deps/nullmodem.Po"; \
            else rm -f ".deps/nullmodem.Tpo"; exit 1; \
            fi
    rm -f libserial.a
    ar cru libserial.a directserial_win32.o serialdummy.o serialport.o softmodem.o misc_util.o directserial_os2.o directserial_posix.o nullmodem.o 
    ranlib libserial.a
    make[4]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/hardware/serialport'
    make[4]: Entering directory `/media/sdc1/download/dosbox-0.70/src/hardware'
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT adlib.o -MD -MP -MF ".deps/adlib.Tpo" \
              -c -o adlib.o `test -f 'adlib.cpp' || echo './'`adlib.cpp; \
            then mv -f ".deps/adlib.Tpo" ".deps/adlib.Po"; \
            else rm -f ".deps/adlib.Tpo"; exit 1; \
            fi
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:375: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c:501: warning: converting to ‘OPL2::UINT8’ from ‘double’
    fmopl.c: In function ‘void OPL2::OPL_initalize(OPL2::FM_OPL*)’:
    fmopl.c:1304: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:1307: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:1312: warning: converting to ‘OPL2::UINT32’ from ‘double’
    fmopl.c:1314: warning: converting to ‘OPL2::UINT32’ from ‘double’
    ymf262.c: At global scope:
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:326: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c:452: warning: converting to ‘THEOPL3::UINT8’ from ‘double’
    ymf262.c: In function ‘void THEOPL3::OPL3_initalize(THEOPL3::OPL3*)’:
    ymf262.c:1347: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:1350: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:1355: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    ymf262.c:1357: warning: converting to ‘THEOPL3::UINT32’ from ‘double’
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dma.o -MD -MP -MF ".deps/dma.Tpo" \
              -c -o dma.o `test -f 'dma.cpp' || echo './'`dma.cpp; \
            then mv -f ".deps/dma.Tpo" ".deps/dma.Po"; \
            else rm -f ".deps/dma.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT gameblaster.o -MD -MP -MF ".deps/gameblaster.Tpo" \
              -c -o gameblaster.o `test -f 'gameblaster.cpp' || echo './'`gameblaster.cpp; \
            then mv -f ".deps/gameblaster.Tpo" ".deps/gameblaster.Po"; \
            else rm -f ".deps/gameblaster.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT hardware.o -MD -MP -MF ".deps/hardware.Tpo" \
              -c -o hardware.o `test -f 'hardware.cpp' || echo './'`hardware.cpp; \
            then mv -f ".deps/hardware.Tpo" ".deps/hardware.Po"; \
            else rm -f ".deps/hardware.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT iohandler.o -MD -MP -MF ".deps/iohandler.Tpo" \
              -c -o iohandler.o `test -f 'iohandler.cpp' || echo './'`iohandler.cpp; \
            then mv -f ".deps/iohandler.Tpo" ".deps/iohandler.Po"; \
            else rm -f ".deps/iohandler.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT joystick.o -MD -MP -MF ".deps/joystick.Tpo" \
              -c -o joystick.o `test -f 'joystick.cpp' || echo './'`joystick.cpp; \
            then mv -f ".deps/joystick.Tpo" ".deps/joystick.Po"; \
            else rm -f ".deps/joystick.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT keyboard.o -MD -MP -MF ".deps/keyboard.Tpo" \
              -c -o keyboard.o `test -f 'keyboard.cpp' || echo './'`keyboard.cpp; \
            then mv -f ".deps/keyboard.Tpo" ".deps/keyboard.Po"; \
            else rm -f ".deps/keyboard.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT memory.o -MD -MP -MF ".deps/memory.Tpo" \
              -c -o memory.o `test -f 'memory.cpp' || echo './'`memory.cpp; \
            then mv -f ".deps/memory.Tpo" ".deps/memory.Po"; \
            else rm -f ".deps/memory.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT mixer.o -MD -MP -MF ".deps/mixer.Tpo" \
              -c -o mixer.o `test -f 'mixer.cpp' || echo './'`mixer.cpp; \
            then mv -f ".deps/mixer.Tpo" ".deps/mixer.Po"; \
            else rm -f ".deps/mixer.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT pcspeaker.o -MD -MP -MF ".deps/pcspeaker.Tpo" \
              -c -o pcspeaker.o `test -f 'pcspeaker.cpp' || echo './'`pcspeaker.cpp; \
            then mv -f ".deps/pcspeaker.Tpo" ".deps/pcspeaker.Po"; \
            else rm -f ".deps/pcspeaker.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT pic.o -MD -MP -MF ".deps/pic.Tpo" \
              -c -o pic.o `test -f 'pic.cpp' || echo './'`pic.cpp; \
            then mv -f ".deps/pic.Tpo" ".deps/pic.Po"; \
            else rm -f ".deps/pic.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT sblaster.o -MD -MP -MF ".deps/sblaster.Tpo" \
              -c -o sblaster.o `test -f 'sblaster.cpp' || echo './'`sblaster.cpp; \
            then mv -f ".deps/sblaster.Tpo" ".deps/sblaster.Po"; \
            else rm -f ".deps/sblaster.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT tandy_sound.o -MD -MP -MF ".deps/tandy_sound.Tpo" \
              -c -o tandy_sound.o `test -f 'tandy_sound.cpp' || echo './'`tandy_sound.cpp; \
            then mv -f ".deps/tandy_sound.Tpo" ".deps/tandy_sound.Po"; \
            else rm -f ".deps/tandy_sound.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT timer.o -MD -MP -MF ".deps/timer.Tpo" \
              -c -o timer.o `test -f 'timer.cpp' || echo './'`timer.cpp; \
            then mv -f ".deps/timer.Tpo" ".deps/timer.Po"; \
            else rm -f ".deps/timer.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga.o -MD -MP -MF ".deps/vga.Tpo" \
              -c -o vga.o `test -f 'vga.cpp' || echo './'`vga.cpp; \
            then mv -f ".deps/vga.Tpo" ".deps/vga.Po"; \
            else rm -f ".deps/vga.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_attr.o -MD -MP -MF ".deps/vga_attr.Tpo" \
              -c -o vga_attr.o `test -f 'vga_attr.cpp' || echo './'`vga_attr.cpp; \
            then mv -f ".deps/vga_attr.Tpo" ".deps/vga_attr.Po"; \
            else rm -f ".deps/vga_attr.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_crtc.o -MD -MP -MF ".deps/vga_crtc.Tpo" \
              -c -o vga_crtc.o `test -f 'vga_crtc.cpp' || echo './'`vga_crtc.cpp; \
            then mv -f ".deps/vga_crtc.Tpo" ".deps/vga_crtc.Po"; \
            else rm -f ".deps/vga_crtc.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_dac.o -MD -MP -MF ".deps/vga_dac.Tpo" \
              -c -o vga_dac.o `test -f 'vga_dac.cpp' || echo './'`vga_dac.cpp; \
            then mv -f ".deps/vga_dac.Tpo" ".deps/vga_dac.Po"; \
            else rm -f ".deps/vga_dac.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_draw.o -MD -MP -MF ".deps/vga_draw.Tpo" \
              -c -o vga_draw.o `test -f 'vga_draw.cpp' || echo './'`vga_draw.cpp; \
            then mv -f ".deps/vga_draw.Tpo" ".deps/vga_draw.Po"; \
            else rm -f ".deps/vga_draw.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_gfx.o -MD -MP -MF ".deps/vga_gfx.Tpo" \
              -c -o vga_gfx.o `test -f 'vga_gfx.cpp' || echo './'`vga_gfx.cpp; \
            then mv -f ".deps/vga_gfx.Tpo" ".deps/vga_gfx.Po"; \
            else rm -f ".deps/vga_gfx.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_other.o -MD -MP -MF ".deps/vga_other.Tpo" \
              -c -o vga_other.o `test -f 'vga_other.cpp' || echo './'`vga_other.cpp; \
            then mv -f ".deps/vga_other.Tpo" ".deps/vga_other.Po"; \
            else rm -f ".deps/vga_other.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_memory.o -MD -MP -MF ".deps/vga_memory.Tpo" \
              -c -o vga_memory.o `test -f 'vga_memory.cpp' || echo './'`vga_memory.cpp; \
            then mv -f ".deps/vga_memory.Tpo" ".deps/vga_memory.Po"; \
            else rm -f ".deps/vga_memory.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_misc.o -MD -MP -MF ".deps/vga_misc.Tpo" \
              -c -o vga_misc.o `test -f 'vga_misc.cpp' || echo './'`vga_misc.cpp; \
            then mv -f ".deps/vga_misc.Tpo" ".deps/vga_misc.Po"; \
            else rm -f ".deps/vga_misc.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_seq.o -MD -MP -MF ".deps/vga_seq.Tpo" \
              -c -o vga_seq.o `test -f 'vga_seq.cpp' || echo './'`vga_seq.cpp; \
            then mv -f ".deps/vga_seq.Tpo" ".deps/vga_seq.Po"; \
            else rm -f ".deps/vga_seq.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_xga.o -MD -MP -MF ".deps/vga_xga.Tpo" \
              -c -o vga_xga.o `test -f 'vga_xga.cpp' || echo './'`vga_xga.cpp; \
            then mv -f ".deps/vga_xga.Tpo" ".deps/vga_xga.Po"; \
            else rm -f ".deps/vga_xga.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT vga_s3.o -MD -MP -MF ".deps/vga_s3.Tpo" \
              -c -o vga_s3.o `test -f 'vga_s3.cpp' || echo './'`vga_s3.cpp; \
            then mv -f ".deps/vga_s3.Tpo" ".deps/vga_s3.Po"; \
            else rm -f ".deps/vga_s3.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT cmos.o -MD -MP -MF ".deps/cmos.Tpo" \
              -c -o cmos.o `test -f 'cmos.cpp' || echo './'`cmos.cpp; \
            then mv -f ".deps/cmos.Tpo" ".deps/cmos.Po"; \
            else rm -f ".deps/cmos.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT disney.o -MD -MP -MF ".deps/disney.Tpo" \
              -c -o disney.o `test -f 'disney.cpp' || echo './'`disney.cpp; \
            then mv -f ".deps/disney.Tpo" ".deps/disney.Po"; \
            else rm -f ".deps/disney.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT gus.o -MD -MP -MF ".deps/gus.Tpo" \
              -c -o gus.o `test -f 'gus.cpp' || echo './'`gus.cpp; \
            then mv -f ".deps/gus.Tpo" ".deps/gus.Po"; \
            else rm -f ".deps/gus.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT mpu401.o -MD -MP -MF ".deps/mpu401.Tpo" \
              -c -o mpu401.o `test -f 'mpu401.cpp' || echo './'`mpu401.cpp; \
            then mv -f ".deps/mpu401.Tpo" ".deps/mpu401.Po"; \
            else rm -f ".deps/mpu401.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT ipx.o -MD -MP -MF ".deps/ipx.Tpo" \
              -c -o ipx.o `test -f 'ipx.cpp' || echo './'`ipx.cpp; \
            then mv -f ".deps/ipx.Tpo" ".deps/ipx.Po"; \
            else rm -f ".deps/ipx.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT ipxserver.o -MD -MP -MF ".deps/ipxserver.Tpo" \
              -c -o ipxserver.o `test -f 'ipxserver.cpp' || echo './'`ipxserver.cpp; \
            then mv -f ".deps/ipxserver.Tpo" ".deps/ipxserver.Po"; \
            else rm -f ".deps/ipxserver.Tpo"; exit 1; \
            fi
    rm -f libhardware.a
    ar cru libhardware.a adlib.o dma.o gameblaster.o hardware.o iohandler.o joystick.o keyboard.o memory.o mixer.o pcspeaker.o pic.o sblaster.o tandy_sound.o timer.o vga.o vga_attr.o vga_crtc.o vga_dac.o vga_draw.o vga_gfx.o vga_other.o vga_memory.o vga_misc.o vga_seq.o vga_xga.o vga_s3.o cmos.o disney.o gus.o mpu401.o ipx.o ipxserver.o 
    ranlib libhardware.a
    make[4]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/hardware'
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/hardware'
    Making all in libs
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/libs'
    Continued next message
    =======================
    Futz's Microcontrollers & Robotics
    =======================

  7. #7
    Join Date
    Oct 2005
    Location
    Vancouver, B.C.
    Beans
    289
    Distro
    Ubuntu

    Re: [HOWTO] Installing the latest of Dosbox

    make continued (part 3):
    Code:
    Making all in zmbv
    make[4]: Entering directory `/media/sdc1/download/dosbox-0.70/src/libs/zmbv'
    make[4]: Nothing to be done for `all'.
    make[4]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/libs/zmbv'
    make[4]: Entering directory `/media/sdc1/download/dosbox-0.70/src/libs'
    make[4]: Nothing to be done for `all-am'.
    make[4]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/libs'
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/libs'
    Making all in ints
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/ints'
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT mouse.o -MD -MP -MF ".deps/mouse.Tpo" \
              -c -o mouse.o `test -f 'mouse.cpp' || echo './'`mouse.cpp; \
            then mv -f ".deps/mouse.Tpo" ".deps/mouse.Po"; \
            else rm -f ".deps/mouse.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT xms.o -MD -MP -MF ".deps/xms.Tpo" \
              -c -o xms.o `test -f 'xms.cpp' || echo './'`xms.cpp; \
            then mv -f ".deps/xms.Tpo" ".deps/xms.Po"; \
            else rm -f ".deps/xms.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT ems.o -MD -MP -MF ".deps/ems.Tpo" \
              -c -o ems.o `test -f 'ems.cpp' || echo './'`ems.cpp; \
            then mv -f ".deps/ems.Tpo" ".deps/ems.Po"; \
            else rm -f ".deps/ems.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT int10.o -MD -MP -MF ".deps/int10.Tpo" \
              -c -o int10.o `test -f 'int10.cpp' || echo './'`int10.cpp; \
            then mv -f ".deps/int10.Tpo" ".deps/int10.Po"; \
            else rm -f ".deps/int10.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT int10_char.o -MD -MP -MF ".deps/int10_char.Tpo" \
              -c -o int10_char.o `test -f 'int10_char.cpp' || echo './'`int10_char.cpp; \
            then mv -f ".deps/int10_char.Tpo" ".deps/int10_char.Po"; \
            else rm -f ".deps/int10_char.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT int10_memory.o -MD -MP -MF ".deps/int10_memory.Tpo" \
              -c -o int10_memory.o `test -f 'int10_memory.cpp' || echo './'`int10_memory.cpp; \
            then mv -f ".deps/int10_memory.Tpo" ".deps/int10_memory.Po"; \
            else rm -f ".deps/int10_memory.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT int10_misc.o -MD -MP -MF ".deps/int10_misc.Tpo" \
              -c -o int10_misc.o `test -f 'int10_misc.cpp' || echo './'`int10_misc.cpp; \
            then mv -f ".deps/int10_misc.Tpo" ".deps/int10_misc.Po"; \
            else rm -f ".deps/int10_misc.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT int10_modes.o -MD -MP -MF ".deps/int10_modes.Tpo" \
              -c -o int10_modes.o `test -f 'int10_modes.cpp' || echo './'`int10_modes.cpp; \
            then mv -f ".deps/int10_modes.Tpo" ".deps/int10_modes.Po"; \
            else rm -f ".deps/int10_modes.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT int10_vesa.o -MD -MP -MF ".deps/int10_vesa.Tpo" \
              -c -o int10_vesa.o `test -f 'int10_vesa.cpp' || echo './'`int10_vesa.cpp; \
            then mv -f ".deps/int10_vesa.Tpo" ".deps/int10_vesa.Po"; \
            else rm -f ".deps/int10_vesa.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT int10_pal.o -MD -MP -MF ".deps/int10_pal.Tpo" \
              -c -o int10_pal.o `test -f 'int10_pal.cpp' || echo './'`int10_pal.cpp; \
            then mv -f ".deps/int10_pal.Tpo" ".deps/int10_pal.Po"; \
            else rm -f ".deps/int10_pal.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT int10_put_pixel.o -MD -MP -MF ".deps/int10_put_pixel.Tpo" \
              -c -o int10_put_pixel.o `test -f 'int10_put_pixel.cpp' || echo './'`int10_put_pixel.cpp; \
            then mv -f ".deps/int10_put_pixel.Tpo" ".deps/int10_put_pixel.Po"; \
            else rm -f ".deps/int10_put_pixel.Tpo"; exit 1; \
            fi
    int10_put_pixel.cpp:24: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:24: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:24: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:24: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:25: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:25: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:25: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:25: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:25: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:25: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:25: warning: large integer implicitly truncated to unsigned type
    int10_put_pixel.cpp:25: warning: large integer implicitly truncated to unsigned type
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT bios.o -MD -MP -MF ".deps/bios.Tpo" \
              -c -o bios.o `test -f 'bios.cpp' || echo './'`bios.cpp; \
            then mv -f ".deps/bios.Tpo" ".deps/bios.Po"; \
            else rm -f ".deps/bios.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT bios_disk.o -MD -MP -MF ".deps/bios_disk.Tpo" \
              -c -o bios_disk.o `test -f 'bios_disk.cpp' || echo './'`bios_disk.cpp; \
            then mv -f ".deps/bios_disk.Tpo" ".deps/bios_disk.Po"; \
            else rm -f ".deps/bios_disk.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT bios_keyboard.o -MD -MP -MF ".deps/bios_keyboard.Tpo" \
              -c -o bios_keyboard.o `test -f 'bios_keyboard.cpp' || echo './'`bios_keyboard.cpp; \
            then mv -f ".deps/bios_keyboard.Tpo" ".deps/bios_keyboard.Po"; \
            else rm -f ".deps/bios_keyboard.Tpo"; exit 1; \
            fi
    rm -f libints.a
    ar cru libints.a mouse.o xms.o ems.o int10.o int10_char.o int10_memory.o int10_misc.o int10_modes.o int10_vesa.o int10_pal.o int10_put_pixel.o bios.o bios_disk.o bios_keyboard.o 
    ranlib libints.a
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/ints'
    Making all in misc
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/misc'
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT programs.o -MD -MP -MF ".deps/programs.Tpo" \
              -c -o programs.o `test -f 'programs.cpp' || echo './'`programs.cpp; \
            then mv -f ".deps/programs.Tpo" ".deps/programs.Po"; \
            else rm -f ".deps/programs.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT messages.o -MD -MP -MF ".deps/messages.Tpo" \
              -c -o messages.o `test -f 'messages.cpp' || echo './'`messages.cpp; \
            then mv -f ".deps/messages.Tpo" ".deps/messages.Po"; \
            else rm -f ".deps/messages.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT support.o -MD -MP -MF ".deps/support.Tpo" \
              -c -o support.o `test -f 'support.cpp' || echo './'`support.cpp; \
            then mv -f ".deps/support.Tpo" ".deps/support.Po"; \
            else rm -f ".deps/support.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT setup.o -MD -MP -MF ".deps/setup.Tpo" \
              -c -o setup.o `test -f 'setup.cpp' || echo './'`setup.cpp; \
            then mv -f ".deps/setup.Tpo" ".deps/setup.Po"; \
            else rm -f ".deps/setup.Tpo"; exit 1; \
            fi
    rm -f libmisc.a
    ar cru libmisc.a programs.o messages.o support.o setup.o 
    ranlib libmisc.a
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/misc'
    Making all in shell
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/shell'
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT shell.o -MD -MP -MF ".deps/shell.Tpo" \
              -c -o shell.o `test -f 'shell.cpp' || echo './'`shell.cpp; \
            then mv -f ".deps/shell.Tpo" ".deps/shell.Po"; \
            else rm -f ".deps/shell.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT shell_batch.o -MD -MP -MF ".deps/shell_batch.Tpo" \
              -c -o shell_batch.o `test -f 'shell_batch.cpp' || echo './'`shell_batch.cpp; \
            then mv -f ".deps/shell_batch.Tpo" ".deps/shell_batch.Po"; \
            else rm -f ".deps/shell_batch.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT shell_cmds.o -MD -MP -MF ".deps/shell_cmds.Tpo" \
              -c -o shell_cmds.o `test -f 'shell_cmds.cpp' || echo './'`shell_cmds.cpp; \
            then mv -f ".deps/shell_cmds.Tpo" ".deps/shell_cmds.Po"; \
            else rm -f ".deps/shell_cmds.Tpo"; exit 1; \
            fi
    if g++ -DHAVE_CONFIG_H -I. -I. -I../..  -I../../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT shell_misc.o -MD -MP -MF ".deps/shell_misc.Tpo" \
              -c -o shell_misc.o `test -f 'shell_misc.cpp' || echo './'`shell_misc.cpp; \
            then mv -f ".deps/shell_misc.Tpo" ".deps/shell_misc.Po"; \
            else rm -f ".deps/shell_misc.Tpo"; exit 1; \
            fi
    rm -f libshell.a
    ar cru libshell.a shell.o shell_batch.o shell_cmds.o shell_misc.o 
    ranlib libshell.a
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/shell'
    Making all in platform
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src/platform'
    Making all in visualc
    make[4]: Entering directory `/media/sdc1/download/dosbox-0.70/src/platform/visualc'
    make[4]: Nothing to be done for `all'.
    make[4]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/platform/visualc'
    make[4]: Entering directory `/media/sdc1/download/dosbox-0.70/src/platform'
    make[4]: Nothing to be done for `all-am'.
    make[4]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/platform'
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src/platform'
    make[3]: Entering directory `/media/sdc1/download/dosbox-0.70/src'
    if g++ -DHAVE_CONFIG_H -I. -I. -I..  -I../include -I/usr/local/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT  -g -O2 -MT dosbox.o -MD -MP -MF ".deps/dosbox.Tpo" \
              -c -o dosbox.o `test -f 'dosbox.cpp' || echo './'`dosbox.cpp; \
            then mv -f ".deps/dosbox.Tpo" ".deps/dosbox.Po"; \
            else rm -f ".deps/dosbox.Tpo"; exit 1; \
            fi
    g++  -g -O2   -o dosbox  dosbox.o cpu/libcpu.a debug/libdebug.a dos/libdos.a fpu/libfpu.a  hardware/libhardware.a gui/libgui.a ints/libints.a misc/libmisc.a shell/libshell.a hardware/serialport/libserial.a  -lasound -lm -ldl -lpthread -L/usr/local/lib -Wl,-rpath,/usr/local/lib -lSDL -lpng -lz -lGL
    make[3]: Leaving directory `/media/sdc1/download/dosbox-0.70/src'
    make[2]: Leaving directory `/media/sdc1/download/dosbox-0.70/src'
    Making all in include
    make[2]: Entering directory `/media/sdc1/download/dosbox-0.70/include'
    make[2]: Nothing to be done for `all'.
    make[2]: Leaving directory `/media/sdc1/download/dosbox-0.70/include'
    Making all in docs
    make[2]: Entering directory `/media/sdc1/download/dosbox-0.70/docs'
    make[2]: Nothing to be done for `all'.
    make[2]: Leaving directory `/media/sdc1/download/dosbox-0.70/docs'
    Making all in visualc_net
    make[2]: Entering directory `/media/sdc1/download/dosbox-0.70/visualc_net'
    make[2]: Nothing to be done for `all'.
    make[2]: Leaving directory `/media/sdc1/download/dosbox-0.70/visualc_net'
    make[2]: Entering directory `/media/sdc1/download/dosbox-0.70'
    make[2]: Leaving directory `/media/sdc1/download/dosbox-0.70'
    make[1]: Leaving directory `/media/sdc1/download/dosbox-0.70'
    =======================
    Futz's Microcontrollers & Robotics
    =======================

  8. #8
    Join Date
    Jul 2005
    Location
    2 exits past crazy
    Beans
    4,223
    Distro
    Lubuntu 12.10 Quantal Quetzal

    Re: [HOWTO] Installing the latest of Dosbox

    configure: WARNING: Can't find libSDL_sound, libSDL_sound support disabled
    That explains your sound issue at least. You probably need to install libsdl-sound1.2-dev

    Edit: Note that this is on Edgy. For Dapper the version of libsdl-sound*-dev will probably be different.

  9. #9
    Join Date
    Oct 2005
    Location
    Vancouver, B.C.
    Beans
    289
    Distro
    Ubuntu

    Re: [HOWTO] Installing the latest of Dosbox

    Quote Originally Posted by yabbadabbadont View Post
    That explains your sound issue at least. You probably need to install libsdl-sound1.2-dev

    Edit: Note that this is on Edgy. For Dapper the version of libsdl-sound*-dev will probably be different.
    libsdl-sound1.2-dev was already installed

    Code:
    futz@xblade:~$ sudo apt-get install libsdl-sound1.2-dev
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    libsdl-sound1.2-dev is already the newest version.
    0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
    =======================
    Futz's Microcontrollers & Robotics
    =======================

  10. #10
    Join Date
    Jun 2006
    Location
    New Haven, Ct. USA
    Beans
    50
    Distro
    Ubuntu 7.10 Gutsy Gibbon

    Re: [HOWTO] Installing the latest of Dosbox

    I've tried using dosbox for a more serious application. My employer has a bunch of old source code for which the version control system is tlib, an old dos program. The sources are kept on a samba share on a BSD box. I tried using dosbox to run tlib and get at these sources directly. Otherwise I have to use a crappy old W2k box, pscp, and fromdos to get them to my edgy box, and edit them.

    The problem is that dosbox mangles the permissions on the files, so that they look like read only, when in fact they're 664 (-rw-rw-r--). Anybody have any ideas on how to fix this?

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •