Stuck at Install

[tonyr1988]

I just upgraded my Desktop (new motherboard, RAM, graphics card, processor, etc.) and I went from 32-bit to 64-bit. I've never had a 64-bit machine before, so I'm a total n00b at this. Here are my trials:

I tried the Edgy AMD64 CD. The first time I booted it, it said "Loading Linux Kernel" and (very slowly...) went to 100%. Then it said:

Decompressing Linux... Invalid compression format (err=1) -- System halted

I restarted and tried again. This time...the "Loading Linux Kernel" hit 100% much more quickly (about the same as all other times I've tried the LiveCD) and even went to the loading screen (although it was black / white instead of the regular brown colors). Then, the screen went completely blank. I waited well over 15 minutes and absolutely nothing happened.

I tried it with the Dapper AMD64 CD, with similar results.

I tried it with the Edgy AMD64 Alternate CD and got much further (partitioning and everything). However, I get to "Select and install software" and it freezes at 6%. It says "Please wait..." at the bottom. It's been stuck there well over 30 minutes.

Any ideas what I should do?

Should I try to re-burn the CDs? Although the LiveCDs were burned at 48x, I burned the alternate at 8x so that shouldn't be a problem.

If needed, I can supply more info about the machine. The basics are in my sig.

[kebes]

It could be a motherboard conflict. (Couldn't find your mb spec in your sig, so I can't be sure.) For some chipsets you need to boot with special kernel flags (like "noapic" or whatever). The details depend on your motherboard...

[tonyr1988]

I figured I'd have some sort of problem, changing everything at once. Then again, my graphics card, RAM sticks, and processor weren't compatible with my new motherboard, so I decided to do it all at the same time. What should I specifically be looking for? The chipset is nVIDIA nForce4, and I've got all the other specs with me. Should I try noapic and just experiment with different ones? Should I stick with LiveCDs or the alternate CD?

[tonyr1988]

Tried booting Edgy LiveCD with noapic and nolapic

Same error as the first time..."invalid compreed format --system halted"

[tonyr1988]

One more update: I tried it in VMWare (under WinXP...eek) and it worked perfectly. I still see the ugly black / white loading screen, but everything else works like a charm. Any clue why that happens? Could something be wrong with my graphics card?

[kebes]

Originally Posted by tonyr1988 One more update: I tried it in VMWare (under WinXP...eek) and it worked perfectly. I still see the ugly black / white loading screen, but everything else works like a charm. Any clue why that happens? Could something be wrong with my graphics card?

Sorry I don't understand? You tried ~what~ in VMWare? Do you mean you tried using the CD in a virtual machine and it installed?

Do you mean that you have WinXP running on the computer? (That you can't install Edgy to...)

EDIT: sorry our posts crossed each other! So since XP works on the new hardware that makes a hardware conflict unlikely... I would still recommend trying the Alternate CD with the options mentioned.

[kebes]

Well of course it's different for each different motherboard. However there's no harm (that I'm aware of) in trying to boot with different kernel options and just "seeing what happens." Like I said it's a good idea to do searches on the exact model number for your motherboard on various forums. Also a good idea is to check any error messages from the kernel.

Some options that have been helpful in the past:

acpi=off
noapic
nolapic
all-generic-ide
pci=nommconf
irqpoll


You can try those (in various combinations!) and see what happens. As I recall some of the issues with nForce series have to do with BIOS power management, which is why "noapic" sometimes fixes it. (See also BIOS options.)

Other things to try are to flash the BIOS to the latest version (sometimes the manufacturer has fixed a serious bug that is preventing the boot). Also you should check the options in your BIOS... maybe disabling something will make it suddenly work.

In the past I've found the Alternate CD works better for these things because it is 'simpler' so you avoid at least some possible issues.


Another thing to think about (since this is a whole new system with new components) is weird hardware compatibility issues. For instance awhile back I was building a new computer and put some nice OCZ RAM into an ASUS motherboard... but it turned out that the OCZ ram required a high voltage (2V), whereas the motherboard wouldn't consistently supply above 1.7V. Switched to different RAM (equally good, but able to run at lower voltage) fixed the problem immediately.

So it's worth (for instance) doing a memtest to see what happens. Also worth taking out a RAM chip (if you have two) and see if that makes a difference... or unplugging various devices/cards and seeing what happens.


Sorry no definate answers for you... just some things to try. Good luck.

[tonyr1988]

Thanks for all the info!

I'm trying to do searches for this motherboard, but so far I haven't found anything (it's a Mach Speed MSNV-939). It also doesn't look like there are any BIOS updates for it.

I'm trying different combos for boot options right now - most of them give me the black/white loading screen and then go blank (on the LiveCD). Should I try those same boot options for the alternate CD? I assumed apic, etc. had to do with the display, which wasn't a problem for the alternate.

As far as hardware compatibility...everything seems to work fine under WinXP - does that mean anything?

I'm also going to start trying some other LiveCDs I've got and see if I can get anything to work.