Would you believe if i tell you thata after Kernel upgrade to *19 version from ubuntu servers it worked for a while till i rebooted ? :S the icon popped up,but i didnt have time to try it, i figured it would be a permenant thing .. n now its gone .
Would you believe if i tell you thata after Kernel upgrade to *19 version from ubuntu servers it worked for a while till i rebooted ? :S the icon popped up,but i didnt have time to try it, i figured it would be a permenant thing .. n now its gone .
Qosmio F40 Santa Rosa
HTC Hero rocks
“A bartender is a temporary pharmacist with a limited inventory”
Thanks for the tip. I used to manually hack the toshiba_apci.c driver file in the kernel every time I wanted to get Bluetooth working for a new version of the kernel. I have a Toshiba Portégé m400 tablet:
Also, as a free tip, if you want a quick way to set default values at system start time (like turning on Bluetooth without having to type commands into a terminal) you can use upstart (if you have Feisty or newer, then upstart is already installed). Just make a file called /etc/event.d/omnibook and copy and paste into it the following:Code:$ cat /proc/omnibook/dmi BIOS Vendor: TOSHIBA BIOS Version: Version 3.60 BIOS Release: 06/26/2007 System Vendor: TOSHIBA Product Name: PORTEGE M400 Version: Version 1.0 Serial Number: 46069503H Board Vendor: TOSHIBA Board Name: Version A0
You can tell upstart to start your new bluetooth job immediately with the commandCode:#/etc/event.d/omnibook # Start bluetooth, wireless, and whatever else you want at startup! start on runlevel 2 script echo 1 > /proc/omnibook/bluetooth echo 1 > /proc/omnibook/wifi # put whatever other commands you want to issue in here end scriptor you can just wait until the next time you reboot. I searched high and low for events that upstard can capture immediately on module loads, but to no avail. Anyway, enjoy!Code:$ sudo start omnibook
Finally have my brightness hotkeys working, but only my brightness keys working. Lucky for me, it's been my biggest priority. Trying to get my Fn + TV Out hotkey to work is next.
Anyway, trying to modprobe toshiba or toshiba_acpi gives back an error so I haven't been able to get fnfx to work.
To add on to this thread, A305D owners need to modprobe omnibook ectype=13 with whatever is in the svn repo. modprobe omnibook doesn't enable anything, and using ectype=12 instead of 13 will lock up your box, forcing you to shutdown with a hard reset.
Here is /proc/omnibook/dmi
Code:BIOS Vendor: Insyde Corp. BIOS Version: 1.50 BIOS Release: 06/09/2008 System Vendor: TOSHIBA Product Name: Satellite A305D Version: PSAH0U-00Q009 Serial Number: 78401777Q Board Vendor: ATI Corp. Board Name: Base Board Version
Hi there. I'm having trouble with my Satellite X205-s9810. I'm not sure if it is supported or not (only have dmi and version in /proc/omnibook) and I'm unable to open the omnibook.sourceforge.net webpages. I get a wiki setup error so I don't know if they are having some downtime on their server or what, but I really need to know what a close match would be to my model.
Any help you can give me would be greatly appreciated.Code:BIOS Vendor: TOSHIBA BIOS Version: V2.30 BIOS Release: 02/12/2008 System Vendor: TOSHIBA Product Name: Satellite X205 Version: PSPB9U-05C02P Serial Number: 58245371K Board Vendor: TOSHIBA Board Name: 1.00
--dwpa
1
Last edited by Iili_ya_ili; October 17th, 2008 at 02:29 PM. Reason: English
Try this links: (for internet browser).
http://sourceforge.net/project/showf...roup_id=174260
http://sourceforge.net/projects/omnibook/
And please, help me. I have problems with installing this module on ubuntu (kernel 2.6...). During compilation errors appear and the compillation stops whithout success. Could yoou help me? Or anybody does?
Hi. I want to thank you for this info.
On openSuSE 11 it works jast as you have said. I'll tryit later on OS11.1 as well)
my dmi file:
My lsusb:BIOS Vendor: TOSHIBA
BIOS Version: V4.50
BIOS Release: 09/30/20082
System Vendor: TOSHIBA
Product Name: Satellite P105
Version: PSPA6U-006005
Serial Number: 36078015W
Board Vendor: TOSHIBA
Board Name: Not Applicable
Thanks a lot and Kind RegardsBus 004 Device 002: ID 0930:0508 Toshiba Corp. Integrated Bluetooth HCI
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04fc:0538 Sunplus Technology Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Luis
PS. Thnxs so much to the original poster for this approach.
Humillity is not a "Status"...
It's a "Gift"!!!
Still got the problem on A200-1AE:
Code:# cat /proc/omnibook/dmi BIOS Vendor: TOSHIBA BIOS Version: V1.80 BIOS Release: 08/21/2007 System Vendor: TOSHIBA Product Name: Satellite A200 Version: PSAECE-01Q00DPL Serial Number: 47340777K Board Vendor: TOSHIBA Board Name: 1.00Don't mind the other modules, just need bluetooth running. Anyone can help? I did step-by-step everything written in here, tried different ectypes and just nothing happens...Code:# ls /proc/omnibook dmi version
Humillity is not a "Status"...
It's a "Gift"!!!
I tried every ectype
If I didn't, I would't ask for help...
Everything works on my computer, except for bluetooth and card reader (AFAIK this card reader won't work under Linux )
Bookmarks