Page 2 of 12 FirstFirst 1234 ... LastLast
Results 11 to 20 of 113

Thread: HOWTO: USB Audio device

  1. #11
    Join Date
    May 2005
    Location
    vienna, austria
    Beans
    142
    Distro
    Ubuntu Breezy 5.10

    Re: HOWTO: USB Audio device

    hi satchnut!

    Did you follow the steps as described above. Maybe you missed to execute
    sudo fxload -s /path/to/ld2-ezusb.hex -I /usr/share/alsa/firmware/usx2yloader/us122fw.ihx -D
    schdefan

  2. #12
    Join Date
    Jun 2005
    Beans
    5

    Re: HOWTO: USB Audio device

    Quote Originally Posted by schdefan
    hi satchnut!

    Did you follow the steps as described above. Maybe you missed to execute...

    schdefan
    All fxload seems to do is increment the US-122 Device # by 1.

    SFN:

    $ sudo find / -name ld2-ezusb.hex
    /home/aphid/Desktop/usx2y-fw-0.1b/ld2-ezusb.hex

    $ sudo find / -name us122fw.ihx
    /usr/share/alsa/firmware/usx2yloader/us122fw.ihx

  3. #13
    Join Date
    Oct 2004
    Location
    Indiana
    Beans
    230
    Distro
    Ubuntu Breezy 5.10

    Re: HOWTO: USB Audio device

    Quote Originally Posted by satchnut
    All fxload seems to do is increment the US-122 Device # by 1.

    SFN:

    $ sudo find / -name ld2-ezusb.hex
    /home/aphid/Desktop/usx2y-fw-0.1b/ld2-ezusb.hex

    $ sudo find / -name us122fw.ihx
    /usr/share/alsa/firmware/usx2yloader/us122fw.ihx
    OK. So right before "sudo usx2yloader", you entered:

    Code:
    sudo fxload -s /home/aphid/Desktop/usx2y-fw-0.1b/ld2-ezusb.hex -I /usr/share/alsa/firmware/usx2yloader/us122fw.ihx -D /proc/bus/usb/003/007
    Is that correct?
    In his later years, Oofty Goofty used to like to sit on the front porch of the General Store and
    reminisce about the time he let the late, great John L. Sullivan hit him with a billiard cue.

  4. #14
    Join Date
    Jun 2005
    Beans
    5

    Re: HOWTO: USB Audio device

    Quote Originally Posted by SFN
    OK. So right before "sudo usx2yloader", you entered:

    Code:
    sudo fxload -s /home/aphid/Desktop/usx2y-fw-0.1b/ld2-ezusb.hex -I /usr/share/alsa/firmware/usx2yloader/us122fw.ihx -D /proc/bus/usb/003/007
    Is that correct?
    Yes, correct.

  5. #15
    Join Date
    May 2005
    Location
    vienna, austria
    Beans
    142
    Distro
    Ubuntu Breezy 5.10

    Re: HOWTO: USB Audio device

    After running
    sudo fxload -s /home/aphid/Desktop/usx2y-fw-0.1b/ld2-ezusb.hex -I /usr/share/alsa/firmware/usx2yloader/us122fw.ihx -D /proc/bus/usb/003/007
    did you see some lights turning on on the US-122.

    Maybe you try it to run as root not as sudo.
    And take a look at the last lines of /var/log/syslog or dmesg.

  6. #16
    Join Date
    Jun 2005
    Beans
    5
    Distro
    Kubuntu 7.10 Gutsy Gibbon

    Re: HOWTO: USB Audio device

    Hi. Brand new here, and to Ubuntu.

    I've made it to the same step as Satchnut but I've managed to encounter a brand new error, and was hoping someone might have seen this:

    Code:
    can't modify CPUCS: Broken pipe
    Any ideas on what the problem could be? I've verified that the files are present, and the ID numbers are correct as well.

  7. #17
    Join Date
    Oct 2004
    Location
    Indiana
    Beans
    230
    Distro
    Ubuntu Breezy 5.10

    Re: HOWTO: USB Audio device

    satchnut,

    My next question would have been the same as schdefan's. Any news on that?
    In his later years, Oofty Goofty used to like to sit on the front porch of the General Store and
    reminisce about the time he let the late, great John L. Sullivan hit him with a billiard cue.

  8. #18
    Join Date
    Oct 2004
    Location
    Indiana
    Beans
    230
    Distro
    Ubuntu Breezy 5.10

    Re: HOWTO: USB Audio device

    Quote Originally Posted by TimTheEnchanter
    Hi. Brand new here, and to Ubuntu.

    I've made it to the same step as Satchnut but I've managed to encounter a brand new error, and was hoping someone might have seen this:

    Code:
    can't modify CPUCS: Broken pipe
    Any ideas on what the problem could be? I've verified that the files are present, and the ID numbers are correct as well.

    Greetings, Tim The Enchanter!

    I'm going to take a huge leap here and suggest actual hardware failure. Can you make your US-122 work via Windows? That is, have you been able to since you got this error? Try to find a Windows machine and plug the device in. If it gets recognized and installed, we can rule out hardware failure.
    In his later years, Oofty Goofty used to like to sit on the front porch of the General Store and
    reminisce about the time he let the late, great John L. Sullivan hit him with a billiard cue.

  9. #19
    Join Date
    Jun 2005
    Beans
    5

    Re: HOWTO: USB Audio device

    Quote Originally Posted by schdefan
    After running

    did you see some lights turning on on the US-122.

    Maybe you try it to run as root not as sudo.
    And take a look at the last lines of /var/log/syslog or dmesg.
    None of the lights turned on -- same thing in root.
    I didn't see any useful information in dmesg, so here is the entire output:

    Code:
    Linux version 2.6.10-5-686-smp (buildd@rothera) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 SMP Tue Jun 7 09:34:54 UTC 2005
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000003ff74000 (usable)
     BIOS-e820: 000000003ff74000 - 000000003ff76000 (ACPI NVS)
     BIOS-e820: 000000003ff76000 - 000000003ff97000 (ACPI data)
     BIOS-e820: 000000003ff97000 - 0000000040000000 (reserved)
     BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
     BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
     BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
     BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    127MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000fe710
    On node 0 totalpages: 262004
      DMA zone: 4096 pages, LIFO batch:1
      Normal zone: 225280 pages, LIFO batch:16
      HighMem zone: 32628 pages, LIFO batch:7
    DMI 2.3 present.
    ACPI: RSDP (v000 DELL                                  ) @ 0x000feb90
    ACPI: RSDT (v001 DELL    8300    0x00000007 ASL  0x00000061) @ 0x000fd1cb
    ACPI: FADT (v001 DELL    8300    0x00000007 ASL  0x00000061) @ 0x000fd1ff
    ACPI: SSDT (v001   DELL    st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc90b3
    ACPI: MADT (v001 DELL    8300    0x00000007 ASL  0x00000061) @ 0x000fd273
    ACPI: BOOT (v001 DELL    8300    0x00000007 ASL  0x00000061) @ 0x000fd2df
    ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:2 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 15:2 APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode:  Flat.  Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Built 1 zonelists
    Kernel command line: root=/dev/hda1 ro quiet splash
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 3192.254 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1030728k/1048016k available (1604k kernel code, 16652k reserved, 719k data, 192k init, 130512k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay loop... 6324.22 BogoMIPS (lpj=3162112)
    Security Framework v1.0.0 initialized
    SELinux:  Disabled at boot.
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000
    CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: L3 cache: 2048K
    CPU: Hyper-Threading is disabled
    CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU0: Thermal monitoring enabled
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    ACPI: Looking for DSDT in initrd... not found!
    CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 05
    per-CPU timeslice cutoff: 1462.76 usecs.
    task migration cache decay timeout: 2 msecs.
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay loop... 6373.37 BogoMIPS (lpj=3186688)
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000
    CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: L3 cache: 2048K
    CPU: Hyper-Threading is disabled
    CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU1: Thermal monitoring enabled
    CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 05
    Total of 2 processors activated (12697.60 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 pin1=2 pin2=-1
    checking TSC synchronization across 2 CPUs: passed.
    Brought up 2 CPUs
    CPU0:
     domain 0: span 01
      groups: 01
      domain 1: span 03
       groups: 01 02
    CPU1:
     domain 0: span 02
      groups: 02
      domain 1: span 03
       groups: 02 01
    checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
    Freeing initrd memory: 4536k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfbb31, last bus=2
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20050211
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 10 devices
    PnPBIOS: Disabled by ACPI PNP
    PCI: Using ACPI for IRQ routing
    ** PCI interrupts are no longer routed automatically.  If this
    ** causes a device to stop working, it is probably because the
    ** driver failed to call pci_enable_device().  As a temporary
    ** workaround, the "pci=routeirq" argument restores the old
    ** behavior.  If this argument makes the device work again,
    ** please email the output of "lspci" to bjorn.helgaas@hp.com
    ** so I can fix the driver.
    pnp: 00:09: ioport range 0x800-0x85f could not be reserved
    pnp: 00:09: ioport range 0xc00-0xc7f has been reserved
    pnp: 00:09: ioport range 0x860-0x8ff could not be reserved
    Simple Boot Flag value 0x87 read from CMOS RAM was invalid
    Simple Boot Flag at 0x7a set to 0x1
    audit: initializing netlink socket (disabled)
    audit(1119371647.294:0): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x0
    Initializing Cryptographic API
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    input: AT Translated Set 2 keyboard on isa0060/serio0
    NET: Registered protocol family 2
    IP: routing cache hash table of 8192 buckets, 64Kbytes
    TCP: Hash tables configured (established 262144 bind 65536)
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    Restarting tasks...<6> Strange, kswapd0 not stopped
     Strange, kseriod not stopped
     done
    ACPI wakeup devices:
    VBTN PCI0 USB0 USB1 USB2 USB3 PCI1  KBD
    ACPI: (supports S0 S1 S4 S5)
    RAMDISK: cramfs filesystem found at block 0
    RAMDISK: Loading 4536KiB [1 disk] into ram disk... done.
    VFS: Mounted root (cramfs filesystem) readonly.
    Freeing unused kernel memory: 192k freed
    NET: Registered protocol family 1
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH5: IDE controller at PCI slot 0000:00:1f.1
    ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
    ICH5: chipset revision 2
    ICH5: not 100% native mode: will probe irqs later
        ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
        ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
    Probing IDE interface ide0...
    hda: IC35L080AVVA07-0, ATA DISK drive
    elevator: using anticipatory as default io scheduler
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: max request size: 128KiB
    hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
    hda: cache flushes supported
     /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 >
    Probing IDE interface ide1...
    hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
    hdd: _NEC DVD+RW ND-2100AD, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    Probing IDE interface ide3...
    Probing IDE interface ide4...
    Probing IDE interface ide5...
    Stopping tasks: ==|
    Freeing memory... done (470 pages freed)
    Restarting tasks... done
    ext3: No journal on filesystem on hda1
    Adding 2064312k swap on /dev/hda5.  Priority:-1 extents:1
    hdc: ATAPI 48X DVD-ROM drive, 256kB Cache
    Uniform CD-ROM driver Revision: 3.20
    hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache
    lp: driver loaded but no devices found
    mice: PS/2 mouse device common for all mice
    input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
    ieee1394: Initialized config rom entry `ip1394'
    SCSI subsystem initialized
    sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
    ALSA /usr/src/alsa-driver-1.0.9rc4a/alsa-kernel/pci/emu10k1/emufx.c:1385: Installing spdif_bug patch: Audigy 2 [Unknown]
    ts: Compaq touchscreen protocol output
    Capability LSM initialized
    device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
    md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
    cdrom: open failed.
    cdrom: open failed.
    input: PC Speaker
    Real Time Clock Driver v1.12
    inserting floppy driver for 2.6.10-5-686-smp
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    Linux agpgart interface v0.100 (c) Dave Jones
    agpgart: Detected an Intel i875 Chipset.
    agpgart: Maximum main memory to use for agp memory: 941M
    agpgart: AGP aperture is 256M @ 0xd0000000
    cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: irq 16, io base 0xff80
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: irq 19, io base 0xff60
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: irq 18, io base 0xff40
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: irq 16, io base 0xff20
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usb 4-2: new full speed USB device using uhci_hcd and address 2
    ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: irq 23, pci mem 0xffa80800
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
    PCI: cache line size of 128 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 8 ports detected
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
    usb 5-8: new high speed USB device using ehci_hcd and address 2
    hw_random hardware driver 1.0.0 loaded
    Initializing USB Mass Storage driver...
    scsi0 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    libata version 1.10 loaded.
    ata_piix version 1.03
    ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 18
    ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 18
    ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3e01 87:4003 88:207f
    ata1: dev 0 ATA, max UDMA/133, 234375000 sectors: lba48
    ata1: dev 0 configured for UDMA/133
    scsi1 : ata_piix
    ata2: SATA port has no device.
    scsi2 : ata_piix
      Vendor: ATA       Model: ST3120026AS       Rev: 8.05
      Type:   Direct-Access                      ANSI SCSI revision: 05
    SCSI device sda: 234375000 512-byte hdwr sectors (120000 MB)
    SCSI device sda: drive cache: write back
    SCSI device sda: 234375000 512-byte hdwr sectors (120000 MB)
    SCSI device sda: drive cache: write back
     /dev/scsi/host1/bus0/target0/lun0: p1
    Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
    ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI interrupt 0000:02:03.2[B] -> GSI 18 (level, low) -> IRQ 18
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[fe8fa800-fe8fafff]  Max Packet=[2048]
    e100: Intel(R) PRO/100 Network Driver, 3.2.3-k2-NAPI
    e100: Copyright(c) 1999-2004 Intel Corporation
    ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
    e100: eth0: e100_probe: addr 0xfe8fb000, irq 20, MAC addr 00:0C:F1:D3:C0:F4
    e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c041103c494]
    NET: Registered protocol family 17
      Vendor: SanDisk   Model: Cruzer Mini       Rev: 0.1
      Type:   Direct-Access                      ANSI SCSI revision: 02
    SCSI device sdb: 501759 512-byte hdwr sectors (257 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 03 00 00 00
    sdb: assuming drive cache: write through
    SCSI device sdb: 501759 512-byte hdwr sectors (257 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 03 00 00 00
    sdb: assuming drive cache: write through
     /dev/scsi/host0/bus0/target0/lun0: p1
    Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 0
    usb-storage: device scan complete
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device c0317e40(lo)
    IPv6 over IPv4 tunneling driver
    ACPI: Power Button (FF) [PWRF]
    ibm_acpi: ec object not found
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    [fglrx] module loaded - fglrx 8.14.13 [Jun  8 2005] on minor 0
    allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
    [fglrx] Kernel AGP support doesn't provide agplock functionality.
    [fglrx] AGP detected, AgpState   = 0x1f004a1b (hardware caps of chipset)
    agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
    agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
    [fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
    [fglrx] free  AGP = 256126976
    [fglrx] max   AGP = 256126976
    [fglrx] free  LFB = 116387840
    [fglrx] max   LFB = 116387840
    [fglrx] free  Inv = 134217728
    [fglrx] max   Inv = 134217728
    [fglrx] total Inv = 134217728
    [fglrx] total TIM = 0
    [fglrx] total FB  = 0
    [fglrx] total AGP = 65536
    eth0: no IPv6 routers present
    FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    usb 3-2: new full speed USB device using uhci_hcd and address 2
    usb 3-2: USB disconnect, address 2
    usb 3-2: new full speed USB device using uhci_hcd and address 3
    usb 3-2: USB disconnect, address 3
    usb 3-2: new full speed USB device using uhci_hcd and address 4

  10. #20
    Join Date
    Oct 2004
    Location
    Indiana
    Beans
    230
    Distro
    Ubuntu Breezy 5.10

    Re: HOWTO: USB Audio device

    Quote Originally Posted by satchnut
    None of the lights turned on -- same thing in root.
    I didn't see any useful information in dmesg, so here is the entire output:
    Code:
    <snip>
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    </snip>
    It looks like you are using a USB hub plugged in to a USB port on your computer. Is that correct? If so, does the hub have a power supply or at least a jack for one? If it does, are you using the power supply? If not, try plugging in the power supply.

    Although USB hubs can theoretically run without external power, a whole lot of USB devices fail through hubs unless the hub has external power.
    Last edited by SFN; June 23rd, 2005 at 05:22 PM.
    In his later years, Oofty Goofty used to like to sit on the front porch of the General Store and
    reminisce about the time he let the late, great John L. Sullivan hit him with a billiard cue.

Page 2 of 12 FirstFirst 1234 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •