Page 88 of 137 FirstFirst ... 3878868788899098 ... LastLast
Results 871 to 880 of 1362

Thread: Mount samba shares with utf8 encoding using cifs

  1. #871
    Join Date
    Mar 2009
    Location
    The Netherlands
    Beans
    11
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: Mount samba shares with utf8 encoding using cifs

    Hi,

    I'm having problems mounting the smb shares on my networkdrive.
    I'm using Ubuntu 8.10 and the network drive is a sitecom MD-250.

    I can't mount my shares. When i use Places => Network i can browse and see //Storage and the shares that are on it but i can mount and when i try to open them i get put back in my home.

    - I've installed smbfs and winbind.
    - I added wins to nsswitch.conf (before dns)
    - I've created /media/PUBLIC

    - fstab looks like this.
    Code:
    # /etc/fstab: static file system information.
    #
    # <file system> <mount point>   <type>  <options>       <dump>  <pass>
    proc            /proc           proc    defaults        0       0
    # /dev/sda1
    UUID=9c9a4500-96f5-4c94-a12c-cd423860501b /               ext3    relatime,errors=remount-ro 0       1
    # /dev/sda5
    UUID=703c8617-51b7-4a56-9a73-7203fe7c514b none            swap    sw              0       0
    /dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
    #NETWORK SHARES
    //storage/PUBLIC  /media/PUBLIC  cifs    guest,rw,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
    - smbtree only gives
    Code:
    WORKGROUP
    	\\STORAGE
    - smbclient -L //storage shows
    Code:
    Domain=[ȇ] OS=[] Server=[���]
    
    	Sharename       Type      Comment
    	---------       ----      -------
    	PUBLIC_FTP      Disk      
    	PRIVATE         Disk      
    	PUBLIC          Disk      
    	UPLOAD          Disk      
    	IPC$            IPC       
    
    	Server               Comment
    	---------            -------
    
    	Workgroup            Master
    	---------            -------
    Could someone give me a suggestion what i can do to make this work?

  2. #872
    Join Date
    Mar 2006
    Location
    Kitakyushu Japan
    Beans
    9,361
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Mount samba shares with utf8 encoding using cifs

    What is the output of:
    Code:
    sudo mount /media/PUBLIC
    Also, try adding the workgroup to your mount command like so
    Code:
    //storage/PUBLIC  /media/PUBLIC  cifs    guest,rw,domain=WORKGROUP,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0

  3. #873
    Join Date
    Mar 2009
    Location
    The Netherlands
    Beans
    11
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: Mount samba shares with utf8 encoding using cifs

    mount -a and mount /media/PUBLIC give the following error

    Code:
    mount error 5 = Input/output error
    Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
    I added the workgroup to fstab and rebooted just to be sure.

  4. #874
    Join Date
    Mar 2009
    Location
    The Netherlands
    Beans
    11
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: Mount samba shares with utf8 encoding using cifs

    Btw, i have also added the following two lines to smb.conf

    client plaintext auth = yes
    client lanman auth = yes

    (i should actually be sleeping now. It's 04:47 for me )

  5. #875
    Join Date
    Mar 2006
    Location
    Kitakyushu Japan
    Beans
    9,361
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Mount samba shares with utf8 encoding using cifs

    Check here and apply any firmware updates: http://www.sitecom.com/drivers_resul...%20Case&MD-250

    That probably won't work though. Research on your NAS device indicates that it doesn't support CIFS, only SMB. I suggest you try using FTP instead. Otherwise you'll have to install SMBFS from source.

  6. #876
    Join Date
    Mar 2006
    Location
    Kitakyushu Japan
    Beans
    9,361
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Mount samba shares with utf8 encoding using cifs

    Quote Originally Posted by Bule View Post
    Btw, i have also added the following two lines to smb.conf

    client plaintext auth = yes
    client lanman auth = yes

    (i should actually be sleeping now. It's 04:47 for me )
    Heh, I just had lunch

    Just for good measure, try posting your smb.conf file.

  7. #877
    Join Date
    Mar 2009
    Location
    The Netherlands
    Beans
    11
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: Mount samba shares with utf8 encoding using cifs

    I had already gotten FTP to work but wasn't satisfied with it. Don want to share all drives through FTP. The FTP part is open to the internet and there are some pretty private things on some of the shares.

    smbfs is already installed

    smb.conf
    Code:
    #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which 
    # are not shown in this example
    #
    # Some options that are often worth tuning have been included as
    # commented-out examples in this file.
    #  - When such options are commented with ";", the proposed setting
    #    differs from the default Samba behaviour
    #  - When commented with "#", the proposed setting is the default
    #    behaviour of Samba but the option is considered important
    #    enough to be mentioned here
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic 
    # errors. 
    # A well-established practice is to name the original file
    # "smb.conf.master" and create the "real" config file with
    # testparm -s smb.conf.master >smb.conf
    # This minimizes the size of the really used smb.conf file
    # which, according to the Samba Team, impacts performance
    #
    
    #======================= Global Settings =======================
    
    [global]
    
    client plaintext auth = yes
    client lanman auth = yes
    
    ## Browsing/Identification ###
    
    # Change this to the workgroup/NT-domain name your Samba server will part of
       workgroup = WORKGROUP
    
    # server string is the equivalent of the NT Description field
       server string = %h server (Samba, Ubuntu)
    
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    #   wins support = no
    
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z
    
    # This will prevent nmbd to search for NetBIOS names through DNS.
       dns proxy = no
    
    # What naming service and in what order should we use to resolve host names
    # to IP addresses
    ;   name resolve order = lmhosts host wins bcast
    
    #### Networking ####
    
    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ;   interfaces = 127.0.0.0/8 eth0
    
    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself.  However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ;   bind interfaces only = yes
    
    
    
    #### Debugging/Accounting ####
    
    # This tells Samba to use a separate log file for each machine
    # that connects
       log file = /var/log/samba/log.%m
    
    # Cap the size of the individual log files (in KiB).
       max log size = 1000
    
    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    #   syslog only = no
    
    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
       syslog = 0
    
    # Do something sensible when Samba crashes: mail the admin a backtrace
       panic action = /usr/share/samba/panic-action %d
    
    
    ####### Authentication #######
    
    # "security = user" is always a good idea. This will require a Unix account
    # in this server for every user accessing the server. See
    # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
    # in the samba-doc package for details.
    #   security = user
    
    # You may wish to use password encryption.  See the section on
    # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
       encrypt passwords = true
    
    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.  
       passdb backend = tdbsam
    
       obey pam restrictions = yes
    
    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
       unix password sync = yes
    
    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
       passwd program = /usr/bin/passwd %u
       passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
    
    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
       pam password change = yes
    
    # This option controls how unsuccessful authentication attempts are mapped 
    # to anonymous connections
    map to guest = bad user
    
    ########## Domains ###########
    
    # Is this machine able to authenticate users. Both PDC and BDC
    # must have this setting enabled. If you are the BDC you must
    # change the 'domain master' setting to no
    #
    ;   domain logons = yes
    #
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of the user's profile directory
    # from the client point of view)
    # The following required a [profiles] share to be setup on the
    # samba server (see below)
    ;   logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    # (this is Samba's default)
    #   logon path = \\%N\%U\profile
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ;   logon drive = H:
    #   logon home = \\%N\%U
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ;   logon script = logon.cmd
    
    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe.  The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
    
    ########## Printing ##########
    
    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    #   load printers = yes
    
    # lpr(ng) printing. You may wish to override the location of the
    # printcap file
    ;   printing = bsd
    ;   printcap name = /etc/printcap
    
    # CUPS printing.  See also the cupsaddsmb(8) manpage in the
    # cupsys-client package.
    ;   printing = cups
    ;   printcap name = cups
    
    ############ Misc ############
    
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /home/samba/etc/smb.conf.%m
    
    # Most people will find that this option gives better performance.
    # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
    # for details
    # You may want to add the following on a Linux system:
    #         SO_RCVBUF=8192 SO_SNDBUF=8192
    #   socket options = TCP_NODELAY
    
    # The following parameter is useful only if you have the linpopup package
    # installed. The samba maintainer and the linpopup maintainer are
    # working to ease installation and configuration of linpopup and samba.
    ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
    
    # Domain Master specifies Samba to be the Domain Master Browser. If this
    # machine will be configured as a BDC (a secondary logon server), you
    # must set this to 'no'; otherwise, the default behavior is recommended.
    #   domain master = auto
    
    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ;   idmap uid = 10000-20000
    ;   idmap gid = 10000-20000
    ;   template shell = /bin/bash
    
    # The following was the default behaviour in sarge,
    # but samba upstream reverted the default because it might induce
    # performance issues in large organizations.
    # See Debian bug #368251 for some of the consequences of *not*
    # having this setting and smb.conf(5) for details.
    ;   winbind enum groups = yes
    ;   winbind enum users = yes
    
    # Setup usershare options to enable non-root users to share folders
    # with the net usershare command.
    
    # Maximum number of usershare. 0 (default) means that usershare is disabled.
    ;   usershare max shares = 100
    
    # Allow users who've been granted usershare privileges to create
    # public shares, not just authenticated ones
       usershare allow guests = yes
    
    #======================= Share Definitions =======================
    
    # Un-comment the following (and tweak the other settings below to suit)
    # to enable the default home directory shares.  This will share each
    # user's home directory as \\server\username
    ;[homes]
    ;   comment = Home Directories
    ;   browseable = no
    
    # By default, the home directories are exported read-only. Change the
    # next parameter to 'no' if you want to be able to write to them.
    ;   read only = yes
    
    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
    ;   create mask = 0700
    
    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    ;   directory mask = 0700
    
    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server.  Un-comment the following parameter
    # to make sure that only "username" can connect to \\server\username
    # This might need tweaking when using external authentication schemes
    ;   valid users = %S
    
    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)
    ;[netlogon]
    ;   comment = Network Logon Service
    ;   path = /home/samba/netlogon
    ;   guest ok = yes
    ;   read only = yes
    ;   share modes = no
    
    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on
    ;[profiles]
    ;   comment = Users profiles
    ;   path = /home/samba/profiles
    ;   guest ok = no
    ;   browseable = no
    ;   create mask = 0600
    ;   directory mask = 0700
    
    [printers]
       comment = All Printers
       browseable = no
       path = /var/spool/samba
       printable = yes
       guest ok = no
       read only = yes
       create mask = 0700
    
    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
       comment = Printer Drivers
       path = /var/lib/samba/printers
       browseable = yes
       read only = yes
       guest ok = no
    # Uncomment to allow remote administration of Windows print drivers.
    # Replace 'ntadmin' with the name of the group your admin users are
    # members of.
    ;   write list = root, @ntadmin
    
    # A sample share for sharing your CD-ROM with others.
    ;[cdrom]
    ;   comment = Samba server's CD-ROM
    ;   read only = yes
    ;   locking = no
    ;   path = /cdrom
    ;   guest ok = yes
    
    # The next two parameters show how to auto-mount a CD-ROM when the
    #	cdrom share is accesed. For this to work /etc/fstab must contain
    #	an entry like this:
    #
    #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
    #
    # The CD-ROM gets unmounted automatically after the connection to the
    #
    # If you don't want to use auto-mounting/unmounting make sure the CD
    #	is mounted on /cdrom
    #
    ;   preexec = /bin/mount /cdrom
    ;   postexec = /bin/umount /cdrom

  8. #878
    Join Date
    Mar 2009
    Location
    The Netherlands
    Beans
    11
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: Mount samba shares with utf8 encoding using cifs

    i just found this on an other site.

    It turns out that the new world has switched to using something called CIFS, which seems to be backward compatible with SMBFS (as used by Samba). However, it seems some of the new protocols are not backward compatible with the old Samba 2.0 protocols (which is what my old NAS box uses). From what I can interpret of the error message, it seems like Ubuntu tries to set Unix file system attributes on the newly mounted Samba share, which of course fails miserably. The solution, as it turns out, is simply to turn off this feature. I had to Google for this, but hopefully it saves you the time and bother. The command is:

    smbmount //nas/share /mnt/share -o username=guest,password=,nounix

    Et voilà!

    The only downside is obviously all your files are mounted world read-writable, but I guess it is no worse than being on a Windows box...
    I now have my drive mounted.
    Now to see how to put this into fstab so it mounts on boot.
    Last edited by Bule; March 17th, 2009 at 05:06 AM. Reason: addition

  9. #879
    Join Date
    Mar 2006
    Location
    Kitakyushu Japan
    Beans
    9,361
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Mount samba shares with utf8 encoding using cifs

    This way:
    Code:
    //storage/PUBLIC  /media/PUBLIC  cifs    guest,rw,domain=WORKGROUP,nounix,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
    Last edited by dmizer; March 17th, 2009 at 05:29 AM.

  10. #880
    Join Date
    Mar 2009
    Location
    The Netherlands
    Beans
    11
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: Mount samba shares with utf8 encoding using cifs

    Now both my unprotected and protected shares are mounted during boot.

    Code:
    # /etc/fstab: static file system information.
    #
    # <file system> <mount point>   <type>  <options>       <dump>  <pass>
    proc            /proc           proc    defaults        0       0
    # /dev/sda1
    UUID=9c9a4500-96f5-4c94-a12c-cd423860501b /               ext3    relatime,errors=remount-ro 0       1
    # /dev/sda5
    UUID=703c8617-51b7-4a56-9a73-7203fe7c514b none            swap    sw              0       0
    /dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
    #NETWORK SHARES
    //storage/PUBLIC  /media/PUBLIC  cifs    guest,rw,domain=WORKGROUP,nounix,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
    //storage/PRIVATE  /media/PRIVATE  cifs    credentials=/home/erwin/.smbcredentials,rw,domain=WORKGROUP,nounix,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
    But it seems now i get some kind of "error/message" while i shutdown.

    Code:
    [ 1290.948082]   CIFS VFS: server not responding
    [ 1290.948198]   CIFS VFS: No response for cmd 50 mid 458
    Have to look at that later. Now i need to get a bit of sleep. The alarm goes in 1,5 hour.

    Tnx for your help dmizer.
    Last edited by Bule; March 17th, 2009 at 05:44 AM. Reason: Addition

Page 88 of 137 FirstFirst ... 3878868788899098 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •