Page 2238 of 2284 FirstFirst ... 12381738213821882228223622372238223922402248 ... LastLast
Results 22,371 to 22,380 of 22835

Thread: Post your .conkyrc files w/ screenshots

  1. #22371
    Join Date
    Aug 2013
    Beans
    5

    Re: Post your .conkyrc files w/ screenshots

    Cheapest, internet possible here (I have never seen speeds over 1MB and it drops to 0KBs for 30 seconds or more way too often). Library seems way faster in comparison (and a lot more stable), less chance of corruption of the download.

    I almost forgot. Here is the conky_8a.lua:
    Code:
    --[[ RINGS with SECTORS widget
        v1.1 by wlourf (07 Jan. 2011)
        edited by Caymus
        this widget draws a ring with differents effects 
        http://u-scripts.blogspot.com/2010/08/rings-sectors-widgets.html
        
    To call the script in a conky, use, before TEXT
        lua_load /path/to/the/script/rings.lua
        lua_draw_hook_pre main_rings
    and add one line (blank or not) after TEXT
    
    
    Parameters are :
    3 parameters are mandatory
    name        - the name of the conky variable to display,
                  for example for {$cpu cpu0}, just write name="cpu"
    arg            - the argument of the above variable,
                  for example for {$cpu cpu0}, just write arg="cpu0"
                    arg can be a numerical value if name=""
    max            - the maximum value the above variable can reach,
                  for example for {$cpu cpu0}, just write max=100
        
    Optional parameters:
    xc,yc        - coordinates of the center of the ring,
                  default = middle of the conky window
    radius        - external radius of the ring, in pixels,
                  default = quarter of the width of the conky window
    thickness    - thickness of the ring, in pixels, default = 10 pixels
    start_angle    - starting angle of the ring, in degrees, value can be negative,
                  default = 0 degree
    end_angle    - ending angle of the ring, in degrees,
                  value must be greater than start_angle, default = 360 degrees
    sectors        - number of sectors in the ring, default = 10
    gap_sectors - gap between two sectors, in pixels, default = 1 pixel
    cap            - the way to close a sector, available values are
                    "p" for parallel , default value 
                    "r" for radial (follow the radius)
    inverse_arc    - if set to true, arc will be anticlockwise, default=false
    border_size    - size of the border, in pixels, default = 0 pixel i.e. no border
    fill_sector    - if set to true, each sector will be completely filled,
                  default=false, this parameter is inoperate if sectors=1
    background    - if set to false, background will not be drawn, default=true
    foreground    - if set to false, foreground will not be drawn, default=true
    
    Colours tables below are defined into braces :
    {position in the gradient (0 to 1), colour in hexadecimal, alpha (0 to 1)}
    example for a single colour table : 
    {{0,0xFFAA00,1}} position parameter doesn't matter
    example for a two-colours table : 
    {{0,0xFFAA00,1},{1,0x00AA00,1}} or {{0.5,0xFFAA00,1},{1,0x00AA00,1}}
    example for a three-colours table : 
    {{0,0xFFAA00,1},{0.5,0xFF0000,1},{1,0x00AA00,1}}
    
    bg_colour1    - colour table for background,
                  default = {{0,0x00ffff,0.1},{0.5,0x00FFFF,0.5},{1,0x00FFFF,0.1}}
    fg_colour1    - colour table for foreground,
                  default = {{0,0x00FF00,0.1},{0.5,0x00FF00,1},{1,0x00FF00,0.1}}
    bd_colour1    - colour table for border,
                  default = {{0,0xFFFF00,0.5},{0.5,0xFFFF00,1},{1,0xFFFF00,0.5}}              
    
    Seconds tables for radials gradients :
    bg_colour2    - second colour table for background, default = no second colour
    fg_colour2    - second colour table for foreground, default = no second colour
    bd_colour2    - second colour table for border, default = no second colour
    
    draw_me     - if set to false, text is not drawn (default = true or 1)
                  it can be used with a conky string, if the string returns 1, the text is drawn :
                  example : "${if_empty ${wireless_essid wlan0}}${else}1$endif",
    
    v1.0 (08 Aug. 2010) original release
    v1.1 (07 Jan. 2011) Add draw_me parameter and correct memory leaks, thanks to "Creamy Goodness"
                        text is parsed inside the function, not in the array of settings
    
    --      This program is free software; you can redistribute it and/or modify
    --      it under the terms of the GNU General Public License as published by
    --      the Free Software Foundation version 3 (GPLv3)
    --     
    --      This program is distributed in the hope that it will be useful,
    --      but WITHOUT ANY WARRANTY; without even the implied warranty of
    --      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    --      GNU General Public License for more details.
    --     
    --      You should have received a copy of the GNU General Public License
    --      along with this program; if not, write to the Free Software
    --      Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
    --      MA 02110-1301, USA.        
    
    ]]
    
    
    require 'cairo'
    
    function conky_main_rings()
    -- START PARAMETERS HERE
    local rings_settings={
    
        {
        name="cpu",
        arg="cpu1",
        max=100,
        xc=60,
        yc=100,
        thickness=10,
        radius=60,
        start_angle=5,
        end_angle=175,
        sectors=20,
        bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
        fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
        fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
        },
    
        {
        name="cpu",
        arg="cpu2",
        max=100,
        xc=60,
        yc=100,
        thickness=10,
        radius=60,
        start_angle=185,
        end_angle=355,
        sectors=20,
        bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
        fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
        fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
        },
    
        {
        name="memperc",
        arg="",
        max=100,
        xc=200,
        yc=100,
        thickness=10,
        radius=60,
        start_angle=5,
        end_angle=175,
        sectors=20,
        bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
        fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
        fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
        },
    
        {
        name="swapperc",
        arg="",
        max=100,
        xc=200,
        yc=100,
        thickness=10,
        radius=60,
        start_angle=185,
        end_angle=355,
        sectors=20,
        bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
        fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
        fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
        },
    
        {
        name="fs_used_perc",
        arg="/home",
        max=100,
        xc=200,
        yc=240,
        thickness=10,
        radius=60,
        start_angle=5,
        end_angle=175,
        sectors=20,
        bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
        fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
        fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
        },
    
        {
        name="fs_used_perc",
        arg="/",
        max=100,
        xc=200,
        yc=240,
        thickness=10,
        radius=60,
        start_angle=185,
        end_angle=355,
        sectors=20,
        bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
        fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
        fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
        },
    
        {
        name="downspeedf",
        arg="eth0",
        max=100,
        xc=230,
        yc=375,
        thickness=5,
        radius=30,
        start_angle=5,
        end_angle=175,
        sectors=20,
        bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
        fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
        fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
        },
    
        {
        name="upspeedf",
        arg="eth0",
        max=100,
        xc=230,
        yc=375,
        thickness=5,
        radius=30,
        start_angle=185,
        end_angle=355,
        sectors=20,
        bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
        fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
        fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
        },
    
        {
        name="downspeedf",
        arg="wlan0",
        max=100,
        xc=230,
        yc=450,
        thickness=5,
        radius=30,
        start_angle=5,
        end_angle=175,
        sectors=20,
        bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
        fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
        fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
        },
    
        {
        name="upspeedf",
        arg="wlan0",
        max=100,
        xc=230,
        yc=450,
        thickness=5,
        radius=30,
        start_angle=185,
        end_angle=355,
        sectors=20,
        bg_colour1={{0,0xFFFFFF,0.1},{0.5,0xFFFFFF,0.4},{1,0xFFFFFF,0.1}},
        fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1.0},{1,0x00FF00,0.1}},
        fg_colour2={{0,0xFF0000,0.1},{0.5,0xFF0000,1.0},{1,0xFF0000,0.1}},
        },
    
    }
    --END OF PARAMETERS HERE
    
    --main function
    
        if conky_window==nil then return end
    
        local cs=cairo_xlib_surface_create(conky_window.display,
            conky_window.drawable, 
            conky_window.visual, conky_window.width, conky_window.height)
        local cr=cairo_create(cs)
    
        if tonumber(conky_parse('${updates}'))>3 then
            for i in pairs(rings_settings) do
                draw_ring(cr,rings_settings[i])
            end
        end
    
        cairo_destroy(cr)
    
    end
    
    
    
    
    function draw_ring(cr, t)
    
        local function rgba_to_r_g_b_a(tcolour)
            local colour,alpha=tcolour[2],tcolour[3]
            return ((colour / 0x10000) % 0x100) / 255., 
                ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
        end
                
                
        local function calc_delta(tcol1,tcol2)
            --calculate deltas P R G B A to table_colour 1
    
            for x = 1, #tcol1 do
                tcol1[x].dA    = 0
                tcol1[x].dP = 0
                 tcol1[x].dR = 0
                tcol1[x].dG = 0
                tcol1[x].dB = 0
                if tcol2~=nil and #tcol1 == #tcol2 then
                    local r1,g1,b1,a1 = rgba_to_r_g_b_a(tcol1[x])
                    local r2,g2,b2,a2 = rgba_to_r_g_b_a(tcol2[x])
                    tcol1[x].dP = (tcol2[x][1]-tcol1[x][1])/t.sectors
                     tcol1[x].dR = (r2-r1)/t.sectors
                    tcol1[x].dG = (g2-g1)/t.sectors
                    tcol1[x].dB = (b2-b1)/t.sectors
                    tcol1[x].dA = (a2-a1)/t.sectors        
                    
                end
            end
            
            return tcol1
        end
    
        --check values
        local function setup(t)
            if t.name==nil and t.arg==nil then 
                print ("No input values ... use parameters 'name'" +
                    " with 'arg' or only parameter 'arg' ") 
                return
            end
    
            if t.max==nil then
                print ("No maximum value defined, use 'max'")
                print ("for name=" .. t.name)
                print ("with arg=" .. t.arg)
                return
            end
            if t.name==nil then t.name="" end
            if t.arg==nil then t.arg="" end
    
            if t.xc==nil then t.xc=conky_window.width/2 end
            if t.yc==nil then t.yc=conky_window.height/2 end
            if t.thickness ==nil then t.thickness = 10 end
            if t.radius ==nil then t.radius =conky_window.width/4 end
            if t.start_angle==nil then t.start_angle =0 end
            if t.end_angle==nil then t.end_angle=360 end
            if t.bg_colour1==nil then 
                t.bg_colour1={{0,0x00ffff,0.1},{0.5,0x00FFFF,0.5},{1,0x00FFFF,0.1}}
            end
            if t.fg_colour1==nil then
                t.fg_colour1={{0,0x00FF00,0.1},{0.5,0x00FF00,1},{1,0x00FF00,0.1}}
            end
            if t.bd_colour1==nil then
                t.bd_colour1={{0,0xFFFF00,0.5},{0.5,0xFFFF00,1},{1,0xFFFF00,0.5}}
            end
            if t.sectors==nil then t.sectors=10 end
            if t.gap_sectors==nil then t.gap_sectors=1 end 
            if t.fill_sector==nil then t.fill_sector=false end
            if t.sectors==1 then t.fill_sector=false end
            if t.border_size==nil then t.border_size=0 end
            if t.cap==nil then t.cap="p" end
            --some checks
            if t.thickness>t.radius then t.thickness=t.radius*0.1 end
            t.int_radius = t.radius-t.thickness
    
            --check colors tables 
            for i=1, #t.bg_colour1 do 
                if #t.bg_colour1[i]~=3 then t.bg_colour1[i]={1,0xFFFFFF,0.5} end
            end
            for i=1, #t.fg_colour1 do 
                if #t.fg_colour1[i]~=3 then t.fg_colour1[i]={1,0xFF0000,1} end
            end
            for i=1, #t.bd_colour1 do 
                if #t.bd_colour1[i]~=3 then t.bd_colour1[i]={1,0xFFFF00,1} end
            end
        
            if t.bg_colour2~=nil then
                for i=1, #t.bg_colour2 do 
                    if #t.bg_colour2[i]~=3 then t.bg_colour2[i]={1,0xFFFFFF,0.5} end
                end
            end
            if t.fg_colour2~=nil then
                for i=1, #t.fg_colour2 do 
                    if #t.fg_colour2[i]~=3 then t.fg_colour2[i]={1,0xFF0000,1} end
                end
            end
            if t.bd_colour2~=nil then
                for i=1, #t.bd_colour2 do 
                    if #t.bd_colour2[i]~=3 then t.bd_colour2[i]={1,0xFFFF00,1} end
                end
            end     
            
            if t.start_angle>=t.end_angle then
             local tmp_angle=t.end_angle
             t.end_angle= t.start_angle
             t.start_angle = tmp_angle
             -- print ("inversed angles")
                if t.end_angle-t.start_angle>360 and t.start_angle>0 then
                    t.end_angle=360+t.start_angle
                    print ("reduce angles")
                end
            
                if t.end_angle+t.start_angle>360 and t.start_angle<=0 then
                    t.end_angle=360+t.start_angle
                    print ("reduce angles")
                end
            
                if t.int_radius<0 then t.int_radius =0 end
                if t.int_radius>t.radius then
                    local tmp_radius=t.radius
                    t.radius=t.int_radius
                    t.int_radius=tmp_radius
                    print ("inversed radius")
                end
                if t.int_radius==t.radius then
                    t.int_radius=0
                    print ("int radius set to 0")
                end 
            end
            
            t.fg_colour1 = calc_delta(t.fg_colour1,t.fg_colour2)
            t.bg_colour1 = calc_delta(t.bg_colour1,t.bg_colour2)
            t.bd_colour1 = calc_delta(t.bd_colour1,t.bd_colour2)
        end
        
        if t.draw_me == true then t.draw_me = nil end
        if t.draw_me ~= nil and conky_parse(tostring(t.draw_me)) ~= "1" then return end    
        --initialize table
        setup(t)
        
        --initialize cairo context
        cairo_save(cr)
        cairo_translate(cr,t.xc,t.yc)
        cairo_set_line_join (cr, CAIRO_LINE_JOIN_ROUND)
        cairo_set_line_cap (cr, CAIRO_LINE_CAP_ROUND)
    
        --get value
        local value = 0
        if t.name ~="" then
            value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
        else
            value = tonumber(t.arg)
        end
        if value==nil then value =0 end
    
        --initialize sectors
        --angle of a sector :
        local angleA = ((t.end_angle-t.start_angle)/t.sectors)*math.pi/180
        --value of a sector : 
        local valueA = t.max/t.sectors
        --first angle of a sector : 
        local lastAngle = t.start_angle*math.pi/180
    
    
        local function draw_sector(type_arc,angle0,angle,valpc, idx)
         
            --this function draws a portion of arc
             --type of arc, angle0 = strating angle, angle= angle of sector,
             --valpc = percentage inside the sector, idx = sctor number #
             local tcolor
             if type_arc=="bg" then         --background
                 if valpc==1 then return end
                 tcolor=t.bg_colour1
             elseif type_arc=="fg" then    --foreground
                 if valpc==0 then return end
                 tcolor=t.fg_colour1
             elseif type_arc=="bd" then    --border
                 tcolor=t.bd_colour1
             end 
    
            --angles equivalents to gap_sector
            local ext_delta=math.atan(t.gap_sectors/(2*t.radius))
            local int_delta=math.atan(t.gap_sectors/(2*t.int_radius))
    
            --angles of arcs
            local ext_angle=(angle-ext_delta*2)*valpc
            local int_angle=(angle-int_delta*2)*valpc
    
            --define colours to use for this sector
            if #tcolor==1 then 
                --plain color
                local vR,vG,vB,vA = rgba_to_r_g_b_a(tcolor[1])
                cairo_set_source_rgba(cr,vR+tcolor[1].dR*idx,
                                        vG+tcolor[1].dG*idx,
                                        vB+tcolor[1].dB*idx,
                                        vA+tcolor[1].dA*idx    )
            else
                --radient color
                local pat=cairo_pattern_create_radial(0,0,t.int_radius,0,0,t.radius)
                for i=1, #tcolor do
                    local vP,vR,vG,vB,vA = tcolor[i][1], rgba_to_r_g_b_a(tcolor[i])
                    cairo_pattern_add_color_stop_rgba (pat, 
                                        vP+tcolor[i].dP*idx,
                                        vR+tcolor[i].dR*idx,
                                        vG+tcolor[i].dG*idx,
                                        vB+tcolor[i].dB*idx,
                                        vA+tcolor[i].dA*idx    )
                end
                cairo_set_source (cr, pat)
                cairo_pattern_destroy(pat)
            end
    
            --start drawing
             cairo_save(cr)
            --x axis is parrallel to start of sector
            cairo_rotate(cr,angle0-math.pi/2)
    
            local ri,re = t.int_radius ,t.radius
    
            --point A 
            local angle_a
        
            if t.cap == "p" then 
                angle_a = int_delta
                if t.inverse_arc and type_arc ~="bg" then
                    angle_a = angle-int_angle-int_delta
                end
                if not(t.inverse_arc) and type_arc =="bg" then
                    angle_a = int_delta+int_angle
                end
            else --t.cap=="r"
                angle_a = ext_delta
                if t.inverse_arc and type_arc~="bg" then
                    angle_a = angle-ext_angle-ext_delta
                end
                if not(t.inverse_arc) and type_arc=="bg" then
                    angle_a = ext_delta+ext_angle
                end
            end
            local ax,ay = ri*math.cos(angle_a),ri*math.sin(angle_a)
    
    
            --point B
            local angle_b = ext_delta
            if t.cap == "p" then 
                if t.inverse_arc and type_arc ~="bg" then
                    angle_b = angle-ext_angle-ext_delta
                end
                if not(t.inverse_arc) and type_arc=="bg" then
                    angle_b = ext_delta+ext_angle
                end
            else
                if t.inverse_arc and type_arc ~="bg" then
                    angle_b = angle-ext_angle-ext_delta
                end
                if not(t.inverse_arc) and type_arc=="bg" then
                    angle_b = ext_delta+ext_angle
                end
            end
            local bx,by = re*math.cos(angle_b),re*math.sin(angle_b)
    
            -- EXTERNAL ARC B --> C
            local b0,b1
            if t.inverse_arc then
                if type_arc=="bg" then
                    b0,b1= ext_delta, angle-ext_delta-ext_angle
                else
                    b0,b1= angle-ext_angle-ext_delta, angle-ext_delta
                end
            else
                if type_arc=="bg" then
                    b0,b1= ext_delta+ext_angle, angle-ext_delta
                else
                    b0,b1= ext_delta, ext_angle+ext_delta
                end
            end
            
            ---POINT D
            local angle_c, angle_d
            if t.cap == "p" then 
                angle_d = angle-int_delta
                if t.inverse_arc and type_arc=="bg" then
                    angle_d = angle-int_delta-int_angle    
                end
                if not(t.inverse_arc) and type_arc~="bg" then
                    angle_d=int_delta+int_angle
                end
            else
                angle_d = angle-ext_delta
                if t.inverse_arc and type_arc=="bg" then
                    angle_d =angle-ext_delta-ext_angle
                end
                if not(t.inverse_arc) and type_arc~="bg" then
                    angle_d = ext_angle+ext_delta
                end
            end
            local dx,dy = ri*math.cos(angle_d),ri*math.sin(angle_d)
            
            -- INTERNAL ARC D --> A
            local d0,d1
            if t.cap=="p" then    
                if t.inverse_arc then    
                    if type_arc=="bg" then
                        d0,d1= angle-int_delta-int_angle,int_delta
                    else
                        d0,d1= angle-int_delta, angle- int_angle-int_delta
                    end
                else
                    if type_arc=="bg" then
                        d0,d1= angle-int_delta, int_delta+int_angle
                    else
                        d0,d1= int_delta+int_angle, int_delta
                    end
                end
            else
                if t.inverse_arc then    
                    if type_arc=="bg" then    
                        d0,d1= angle-ext_delta-ext_angle,ext_delta
                    else
                        d0,d1= angle-ext_delta, angle- ext_angle-ext_delta
                    end
                else
                    if type_arc=="bg" then    
                        d0,d1= angle-ext_delta,ext_delta+ext_angle
                    else    
                        d0,d1= ext_angle+ext_delta, ext_delta
                    end
                end            
            end
                
            --draw sector
            cairo_move_to(cr,ax,ay)
            cairo_line_to(cr,bx,by)
            cairo_arc(cr,0,0,re,b0,b1)
            cairo_line_to(cr,dx,dy) 
            cairo_arc_negative(cr,0,0,ri,d0,d1)
             cairo_close_path (cr);
    
            --stroke or fill sector
             if type_arc=="bd" then
                 cairo_set_line_width(cr,t.border_size)
                 cairo_stroke(cr)
             else
                 cairo_fill(cr)
             end
    
             cairo_restore(cr)
    
         end
        --draw sectors
        local n0,n1,n2 = 1,t.sectors,1
        if t.inverse_arc then n0,n1,n2 = t.sectors,1,-1 end
        local index = 0
        for i = n0,n1,n2 do 
            index = index +1
            local valueZ=1
            local cstA, cstB = (i-1),i
            if t.inverse_arc then cstA,cstB = (t.sectors-i), (t.sectors-i+1) end
            
            if value>valueA *cstA and value<valueA*cstB then
                if not t.fill_sector then
                    valueZ = (value-valueA*cstA)/valueA
                end
            else
                if value<valueA*cstB then valueZ=0 end
            end
            
            local start_angle= lastAngle+(i-1)*angleA
            if t.foreground ~= false then 
                draw_sector("fg",start_angle,angleA,valueZ, index)
            end
            if t.background ~= false then 
                draw_sector("bg",start_angle,angleA,valueZ, i)
            end
            if t.border_size>0 then draw_sector("bd",start_angle,angleA,1, i) end
        end
    
        cairo_restore(cr)
    end
    
    
    --[[END OF RING-SECTORS WIDGET]]
    
    require 'cairo'
        
    function conky_main_box()
    
        if conky_window==nil then return end
    
        ---------------------- PARAMETERS BEGIN HERE
        local boxes_settings={
        --FIRST COLUMN
            --default colour and corner
    
        }
    
    
        ---------------------------- PARAMETERS END HERE
        
        local cs=cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
        local cr=cairo_create(cs)
        
        if tonumber(conky_parse("$updates"))<5 then return end
        for i in pairs(boxes_settings) do
            draw_box (cr,boxes_settings[i])
        end
        cairo_destroy(cr)
        cairo_surface_destroy(cs)    
    end
    
        
    function draw_box(cr,t)
    
        if t.draw_me == true then t.draw_me = nil end
        if t.draw_me ~= nil and conky_parse(tostring(t.draw_me)) ~= "1" then return end    
    
        local table_corners={"circle","curve","line"}
    
        local t_operators={
            clear   = CAIRO_OPERATOR_CLEAR,
            source  = CAIRO_OPERATOR_SOURCE,
            over    = CAIRO_OPERATOR_OVER,
            ["in"]      = CAIRO_OPERATOR_IN,
            out     = CAIRO_OPERATOR_OUT,
            atop    = CAIRO_OPERATOR_ATOP,
            dest    = CAIRO_OPERATOR_DEST,
            dest_over   = CAIRO_OPERATOR_DEST_OVER,
            dest_in = CAIRO_OPERATOR_DEST_IN,
            dest_out = CAIRO_OPERATOR_DEST_OUT,
            dest_atop = CAIRO_OPERATOR_DEST_ATOP,
            xor = CAIRO_OPERATOR_XOR,
            add = CAIRO_OPERATOR_ADD,
            saturate =  CAIRO_OPERATOR_SATURATE,
        }
            
        function rgba_to_r_g_b_a(tc)
            --tc={position,colour,alpha}
            local colour = tc[2]
            local alpha = tc[3]
            return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
        end
    
        function table.copy(t)
          local t2 = {}
          for k,v in pairs(t) do
           t2[k] = {v[1],v[2]}
          end
          return t2
        end
    
        function draw_corner(num,t)
            local shape=t[1]
            local radius=t[2]
            local x,y = t[3],t[4]
            if shape=="line" then
                if num == 1 then cairo_line_to(cr,radius,0) 
                    elseif num == 2 then cairo_line_to(cr,x,radius) 
                    elseif num == 3 then cairo_line_to(cr,x-radius,y)
                    elseif num == 4 then cairo_line_to(cr,0,y-radius)
                end
            end
            if shape=="circle" then
                local PI = math.pi
               if num == 1 then cairo_arc(cr,radius,radius,radius,-PI,-PI/2)
                    elseif num == 2 then cairo_arc(cr,x-radius,y+radius,radius,-PI/2,0)
                    elseif num == 3 then cairo_arc(cr,x-radius,y-radius,radius,0,PI/2) 
                    elseif num == 4 then cairo_arc(cr,radius,y-radius,radius,PI/2,-PI)
                end
            end
            if shape=="curve" then
                if num == 1 then cairo_curve_to(cr,0,radius ,0,0 ,radius,0) 
                    elseif num == 2 then cairo_curve_to(cr,x-radius,0, x,y, x,radius)
                    elseif num == 3 then cairo_curve_to(cr,x,y-radius, x,y, x-radius,y)
                    elseif num == 4 then cairo_curve_to(cr,radius,y, x,y, 0,y-radius)
                end
            end        
        end   
    
        --check values and set default values
        if t.x == nil then t.x = 0 end
        if t.y == nil then t.y = 0 end
        if t.w == nil then t.w = conky_window.width end
        if t.h == nil then t.h = conky_window.height end
        if t.radius == nil then t.radius = 0 end
        if t.border == nil then t.border = 0 end
        if t.colour==nil then t.colour={{1,0xFFFFFF,0.5}} end
        if t.linear_gradient ~= nil then 
            if #t.linear_gradient ~= 4 then
                t.linear_gradient = {t.x,t.y,t.width,t.height}
            end
        end 
        if t.angle==nil then t.angle = 0 end
    
        if t.skew_x == nil then t.skew_x=0  end
        if t.skew_y == nil then  t.skew_y=0 end
        if t.scale_x==nil then t.scale_x=1 end
        if t.scale_y==nil then t.scale_y=1 end    
        if t.rot_x == nil then t.rot_x=0  end
        if t.rot_y == nil then  t.rot_y=0 end
        
        if t.operator == nil then t.operator = "over" end
        if (t_operators[t.operator]) == nil then
            print ("wrong operator :",t.operator)
            t.operator = "over"
        end
        
        if t.radial_gradient ~= nil then 
            if #t.radial_gradient ~= 6 then
                t.radial_gradient = {t.x,t.y,0, t.x,t.y, t.width}
            end
        end 
        
        for i=1, #t.colour do    
            if #t.colour[i]~=3 then 
                print ("error in color table")
                t.colour[i]={1,0xFFFFFF,1} 
            end
        end
    
        if t.corners == nil then t.corners={ {"line",0} } end
        local t_corners = {}
        local t_corners = table.copy(t.corners)
        --don't use t_corners=t.corners otherwise t.corners is altered
    
        --complete the t_corners table if needed
        for i=#t_corners+1,4 do    
            t_corners[i]=t_corners[#t_corners]
            local flag=false
            for j,v in pairs(table_corners) do flag=flag or (t_corners[i][1]==v) end 
            if not flag then print ("error in corners table :",t_corners[i][1]);t_corners[i][1]="curve"  end
        end
    
        --this way :    
        --    t_corners[1][4]=x    
        --    t_corners[2][3]=y
        --doesn't work
        t_corners[1]={t_corners[1][1],t_corners[1][2],0,0}
        t_corners[2]={t_corners[2][1],t_corners[2][2],t.w,0}
        t_corners[3]={t_corners[3][1],t_corners[3][2],t.w,t.h}    
        t_corners[4]={t_corners[4][1],t_corners[4][2],0,t.h}        
    
        t.no_gradient = (t.linear_gradient == nil ) and (t.radial_gradient == nil )
    
        cairo_save(cr)
        cairo_translate(cr, t.x, t.y)
        if t.rot_x~=0 or t.rot_y~=0 or t.angle~=0 then
            cairo_translate(cr,t.rot_x,t.rot_y)
            cairo_rotate(cr,t.angle*math.pi/180)
            cairo_translate(cr,-t.rot_x,-t.rot_y)
        end
        if t.scale_x~=1 or t.scale_y~=1 or t.skew_x~=0 or t.skew_y~=0 then
            local matrix0 = cairo_matrix_t:create()
            tolua.takeownership(matrix0)
            cairo_matrix_init (matrix0, t.scale_x,math.pi*t.skew_y/180    , math.pi*t.skew_x/180    ,t.scale_y,0,0)
            cairo_transform(cr,matrix0)    
        end
        
        local tc=t_corners
        cairo_move_to(cr,tc[1][2],0)
        cairo_line_to(cr,t.w-tc[2][2],0)
        draw_corner(2,tc[2])
        cairo_line_to(cr,t.w,t.h-tc[3][2])
        draw_corner(3,tc[3])
        cairo_line_to(cr,tc[4][2],t.h)
        draw_corner(4,tc[4])
        cairo_line_to(cr,0,tc[1][2])
        draw_corner(1,tc[1])
        
        if t.no_gradient then
            cairo_set_source_rgba(cr,rgba_to_r_g_b_a(t.colour[1]))
        else
            if t.linear_gradient ~= nil then
                pat = cairo_pattern_create_linear (t.linear_gradient[1],t.linear_gradient[2],t.linear_gradient[3],t.linear_gradient[4])
            elseif t.radial_gradient ~= nil then
                pat = cairo_pattern_create_radial (t.radial_gradient[1],t.radial_gradient[2],t.radial_gradient[3],
                    t.radial_gradient[4],t.radial_gradient[5],t.radial_gradient[6])
            end
            for i=1, #t.colour do
                cairo_pattern_add_color_stop_rgba (pat, t.colour[i][1], rgba_to_r_g_b_a(t.colour[i]))
            end
            cairo_set_source (cr, pat)
            cairo_pattern_destroy(pat)
        end 
         
        cairo_set_operator(cr,t_operators[t.operator]) 
    
        if t.border>0 then
            cairo_close_path(cr)
            if t.dash ~= nil then cairo_set_dash(cr, t.dash, 1, 0.0) end
            cairo_set_line_width(cr,t.border)
            cairo_stroke(cr)
        else
            cairo_fill(cr)
        end
    
        cairo_restore(cr)
    end
    Here is the conkyrc_8a:
    Code:
    #==============================================================================
    #                                  conkyrc_8a
    #
    #  author  : CAYMUS
    #  version : v20120420-09
    #  license : Distributed under the terms of GNU GPL version 2 or later
    #
    #==============================================================================
    
    background yes
    update_interval 1
    
    cpu_avg_samples 2
    net_avg_samples 2
    temperature_unit celsius
    
    double_buffer yes
    no_buffers yes
    text_buffer_size 2048
    
    gap_x 10
    gap_y 30
    minimum_size 260 700
    #maximum_width 190
    own_window yes
    own_window_type override
    own_window_transparent yes
    own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
    border_inner_margin 0
    border_outer_margin 0
    alignment tr
    
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders no
    
    override_utf8_locale yes
    use_xft yes
    xftfont 6x10:size=8
    xftalpha 0.5
    uppercase no
    
    
    color1 7FFF00
    color2 DCF900
    color3 00FFFF
    color4 FF00FF
    color5 FF6600
    
    lua_load ~/.conky/conky_8a.lua
    lua_draw_hook_pre main_box
    lua_draw_hook_post main_rings
    
    TEXT
    ${goto 25}${font 6x10:size=12,weight:bold}${color #DCF900}$sysname ${font 6x10:size=7,weight:bold}${color4}$kernel on $machine
    
    ${voffset 10}
    ${goto 40}${font 6x10:size=12,weight:bold}${color2}CPU
    ${goto 25}${font 6x10:size=7,weight:normal}${color4}core 1:${goto 70}${cpu cpu1}%
    ${goto 25}${font 6x10:size=7,weight:normal}${color4}core 2:${goto 70}${cpu cpu2}%
    
    ${goto 25}${font 6x10:size=7,weight:normal}${color1}${threads} process 
    
    ${voffset -95}
    ${goto 178}${font 6x10:size=12,weight:bold}${color2}MEM
    ${goto 165}${font 6x10:size=7,weight:normal}${color4}RAM ${goto 200}$mem
    ${goto 165}${font 6x10:size=7,weight:normal}${color4}SWAP ${goto 200}$swap
    
    
    ${voffset 62}
    ${goto 170}${font 6x10:size=12,weight:bold}${color2}DISKS
    ${goto 165}${font 6x10:size=7,weight:normal}${color3}/home${goto 205}${fs_used /home}
    ${goto 165}${font 6x10:size=7,weight:normal}${color3}/${goto 205}${fs_used /}
    
    ${voffset -90}
    ${goto 5}${color4}TOP CPU
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${top name 1}${goto 70}${top pid 1}${goto 100}${top cpu 1}%
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${top name 2}${goto 70}${top pid 2}${goto 100}${top cpu 2}%
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${top name 3}${goto 70}${top pid 3}${goto 100}${top cpu 3}%
    
    ${goto 5}${color4}TOP MEM
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${top_mem name 1}${goto 70}${top_mem pid 1}${goto 100}${top_mem mem 1}%
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${top_mem name 2}${goto 70}${top_mem pid 2}${goto 100}${top_mem mem 2}%
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${top_mem name 3}${goto 70}${top_mem pid 3}${goto 100}${top_mem mem 3}%
    
    ${voffset 0}
    ${goto 5}${font 6x10:size=12,weight:bold}${color2}NET
    ${goto 5}${color4}${font 6x10:size=7,weight:bold}eth0 ${addr eth0}
    ${goto 5}${color1}${font 6x10:size=7,weight:normal}Down: ${downspeed eth0}
    ${goto 5}${color1}Total Down: ${totaldown eth0}
    ${goto 5}${color3}${font 6x10:size=7,weight:normal}Up: ${upspeed eth0}
    ${goto 5}${color3}Total Up: ${totalup eth0}
    
    ${goto 5}${color4}${font 6x10:size=7,weight:bold}wifi ${addr wlan0}
    ${goto 5}${color1}${font 6x10:size=7,weight:normal}Down: ${downspeed wlan0}
    ${goto 5}${color1}Total Down: ${totaldown wlan0}
    ${goto 5}${color3}Up: ${upspeed wlan0}
    ${goto 5}${color3}Total Up: ${totalup wlan0}
    ${goto 5}${color2}AP: ${wireless_essid wlan0} ${goto 125}Speed: ${wireless_bitrate wlan0}
    ${goto 5}${color2}Mode: ${wireless_mode wlan0} ${goto 125}Quality: ${wireless_link_qual_perc wlan0}%
    
    ${goto 5}${font 6x10:size=7,weight:bold}${color4}open ports:   ${tcp_portmon 1 65535 count}
    ${goto 5}${font 6x10:size=7,weight:bold}${color4}${offset 10}URL${goto 220}PORT
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 0} ${goto 220} ${tcp_portmon 1 65535 rport 0}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 1} ${goto 220} ${tcp_portmon 1 65535 rport 1}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 2} ${goto 220} ${tcp_portmon 1 65535 rport 2}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 3} ${goto 220} ${tcp_portmon 1 65535 rport 3}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 4} ${goto 220} ${tcp_portmon 1 65535 rport 4}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 5} ${goto 220} ${tcp_portmon 1 65535 rport 5}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 6} ${goto 220} ${tcp_portmon 1 65535 rport 6}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 7} ${goto 220} ${tcp_portmon 1 65535 rport 7}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 8} ${goto 220} ${tcp_portmon 1 65535 rport 8}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 9} ${goto 220} ${tcp_portmon 1 65535 rport 9}
    
    
    #${goto 5}${font 6x10:size=7,weight:normal}${color3}${tcp_portmon 1 65535 rip  0}${alignr 1}${tcp_portmon 1 65535 rport  0}
    #${goto 5}${font 6x10:size=7,weight:normal}${color3}${tcp_portmon 1 65535 rip  1}${alignr 1}${tcp_portmon 1 65535 rport  1}
    #${goto 5}${font 6x10:size=7,weight:normal}${color3}${tcp_portmon 1 65535 rip  2}${alignr 1}${tcp_portmon 1 65535 rport  2}
    #${goto 5}${font 6x10:size=7,weight:normal}${color3}${tcp_portmon 1 65535 rip  3}${alignr 1}${tcp_portmon 1 65535 rport  3}
    #${goto 5}${font 6x10:size=7,weight:normal}${color3}${tcp_portmon 1 65535 rip  4}${alignr 1}${tcp_portmon 1 65535 rport  4}
    #${goto 5}${font 6x10:size=7,weight:normal}${color3}${tcp_portmon 1 65535 rip  5}${alignr 1}${tcp_portmon 1 65535 rport  5}
    #${goto 5}${font 6x10:size=7,weight:normal}${color3}${tcp_portmon 1 65535 rip  6}${alignr 1}${tcp_portmon 1 65535 rport  6}
    #${goto 5}${font 6x10:size=7,weight:normal}${color3}${tcp_portmon 1 65535 rip  7}${alignr 1}${tcp_portmon 1 65535 rport  7}
    #${goto 5}${font 6x10:size=7,weight:normal}${color3}${tcp_portmon 1 65535 rip  8}${alignr 1}${tcp_portmon 1 65535 rport  8}
    #${goto 5}${font 6x10:size=7,weight:normal}${color3}${tcp_portmon 1 65535 rip  9}${alignr 1}${tcp_portmon 1 65535 rport  9}
    The thing I liked about the conkyrc was the way the color was set up.
    It has a default color value, then just below it are color1 thru color4. I didn't need a default color so I deleted that all together. What made it so cool was if I needed to change a color all I needed to do was change the value in one of the "color#". It would be reflected thru out the entire conkyrc where that "color#" was used.
    Last edited by Andy_Browning; November 1st, 2013 at 09:24 PM. Reason: fix typos in comment

  2. #22372
    Join Date
    Feb 2010
    Location
    SR11 Cockpit
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Andy_Browning View Post
    Cheapest, internet possible here (I have never seen speeds over 1MB and it drops to 0KBs for 30 seconds or more way too often). Library seems way faster in comparison (and a lot more stable), less chance of corruption of the download.

    {snip}

    The thing I liked about the conkyrc was the way the color was set up.
    It has a default color value, then just below it are color1 thru color4. I didn't need a default color so I deleted that all together. What made it so cool was if I needed to change a color all I needed to do was change the value in one of the "color#". It would be reflected thru out the entire conkyrc where that "color#" was used.
    Been a while since I have had slow speed like that. But I see where you are coming from.

    That's a normal thing for color ... there are 13 colour options if one counts "shades" and "outlines"

    The other 11 are:
    default_color=
    color0=
    color1=
    color2=
    color3=
    color4=
    color5=
    color6=
    color7=
    color8=
    color9=

    OPINION: You should have kept the default colour and used it for the colour you used the most: color1 in your case.

    A few things for you to know:

    1. Once you call a ${font} that font remains in affect until:
    - - ${font} - you turn it off at which point the "default_font" (xftfont 6x10:size=8 - in your case - that you do not use at all) becomes the font that stays in affect until changed
    - - ${font 6x10:bold:size=12} --- you change the font

    So likes like:
    Code:
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 1} ${goto 220} ${tcp_portmon 1 65535 rport 1}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 2} ${goto 220} ${tcp_portmon 1 65535 rport 2}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 3} ${goto 220} ${tcp_portmon 1 65535 rport 3}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 4} ${goto 220} ${tcp_portmon 1 65535 rport 4}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 5} ${goto 220} ${tcp_portmon 1 65535 rport 5}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 6} ${goto 220} ${tcp_portmon 1 65535 rport 6}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 7} ${goto 220} ${tcp_portmon 1 65535 rport 7}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 8} ${goto 220} ${tcp_portmon 1 65535 rport 8}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 9} ${goto 220} ${tcp_portmon 1 65535 rport 9}
    can become:
    Code:
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 1} ${goto 220} ${tcp_portmon 1 65535 rport 1}
    ${goto 5}${tcp_portmon 1 65535 rhost 2} ${goto 220} ${tcp_portmon 1 65535 rport 2}
    ${goto 5}${tcp_portmon 1 65535 rhost 3} ${goto 220} ${tcp_portmon 1 65535 rport 3}
    ${goto 5}${tcp_portmon 1 65535 rhost 4} ${goto 220} ${tcp_portmon 1 65535 rport 4}
    ${goto 5}${tcp_portmon 1 65535 rhost 5} ${goto 220} ${tcp_portmon 1 65535 rport 5}
    ${goto 5}${tcp_portmon 1 65535 rhost 6} ${goto 220} ${tcp_portmon 1 65535 rport 6}
    ${goto 5}${tcp_portmon 1 65535 rhost 7} ${goto 220} ${tcp_portmon 1 65535 rport 7}
    ${goto 5}${tcp_portmon 1 65535 rhost 8} ${goto 220} ${tcp_portmon 1 65535 rport 8}
    ${goto 5}${tcp_portmon 1 65535 rhost 9} ${goto 220} ${tcp_portmon 1 65535 rport 9}
    colour is the same so you don't need:

    Code:
    ${color1}command ${color1}command ${color1}command
    this is the same:
    Code:
    ${color1}command command command
    Just for fun ... tidied up the conky code. Call it: andy.brown.conky and try it...
    Code:
    # killall conky && conky -c /media/5/Conky/andy.brown.conky &
    #==============================================================================
    #                                  conkyrc_8a
    #
    #  author  : CAYMUS
    #  version : v20120420-09
    #  license : Distributed under the terms of GNU GPL version 2 or later
    #
    #==============================================================================
    
    background yes
    update_interval 1
    
    cpu_avg_samples 2
    net_avg_samples 2
    temperature_unit celsius
    
    double_buffer yes
    no_buffers yes
    text_buffer_size 2048
    
    gap_x 10
    gap_y 30
    minimum_size 260 700
    #maximum_width 190
    own_window yes
    own_window_type normal #override
    own_window_transparent yes
    own_window_hints undecorate,skip_taskbar,skip_pager,below
    border_inner_margin 0
    border_outer_margin 0
    alignment tr
    
    draw_shades no
    draw_outline no
    draw_borders no
    draw_graph_borders no
    
    override_utf8_locale yes
    use_xft yes
    xftfont 6x10:size=7
    xftalpha 0.5
    uppercase no
    
    default_color 7FFF00
    color1 FF6600
    color2 DCF900
    color3 00FFFF
    color4 FF00FF
    color5 FFDEAD #255 222 173	NavajoWhite
    color6 00BFFF #  0 191 255	DeepSkyBlue
    color7 5F9EA0 # 95 158 160	CadetBlue
    color8 BDB76B #189 183 107	DarkKhaki
    color9 CD5C5C #205  92  92	IndianRed
    
    lua_load ~/.conky/conky_8a.lua
    lua_draw_hook_pre main_box
    lua_draw_hook_post main_rings
    
    top_name_width 8 # 15 is default
    
    TEXT
    ${goto 25}${font 6x10:bold:size=12}${color DCF900}${sysname} ${font 6x10:bold:size=7}${color4}${kernel} on ${machine}${font}
    
    
    
    
    
    ${goto 40}${font 6x10:bold:size=12}${color2}CPU${goto 178}MEM${font}
    ${goto 25}${color4}core 1:${goto 70}${cpu cpu1}%${goto 165}RAM ${goto 200}${mem}
    ${goto 25}core 2:${goto 70}${cpu cpu2}%${goto 165}SWAP ${goto 200}${swap}
    
    ${goto 25}${color}${threads} processes
    
    
    
    
     ${color4}TOP CPU${color}
     ${top name 1}${goto 60}${top pid 1}${goto 90}${top cpu 1}%
     ${top name 2}${goto 60}${top pid 2}${goto 90}${top cpu 2}%
     ${top name 3}${goto 60}${top pid 3}${goto 90}${top cpu 3}%
     ${top name 4}${goto 60}${top pid 4}${goto 90}${top cpu 4}%
     ${top name 5}${goto 60}${top pid 5}${goto 90}${top cpu 5}%
    ${goto 170}${font 6x10:bold:size=12}${color2}DISKS${font}${goto 5}${color4}TOP MEM
     ${color}${top_mem name 1}${goto 60}${top_mem pid 1}${goto 90}${top_mem mem 1}%${goto 165}${color3}/home${goto 205}${fs_used /home}
     ${color}${top_mem name 2}${goto 60}${top_mem pid 2}${goto 90}${top_mem mem 2}%${goto 165}${color3}/${goto 205}${fs_used /}
     ${color}${top_mem name 3}${goto 60}${top_mem pid 3}${goto 90}${top_mem mem 3}%
     ${top_mem name 4}${goto 60}${top_mem pid 4}${goto 90}${top_mem mem 4}%
     ${top_mem name 5}${goto 60}${top_mem pid 5}${goto 90}${top_mem mem 5}%
    
    
    
    
    
     ${font 6x10:bold:size=12}${color2}NET${font}
     ${color4}${font 6x10:bold:size=7}eth0 ${addr eth0}${font}
     ${color} Down: ${downspeed eth0}
     Total Down: ${totaldown eth0}
     ${color3}Up: ${upspeed eth0}
     ${color}Total Up: ${totalup eth0}
    
     ${color4}${font 6x10:bold:size=7}wifi ${addr wlan0}${font}
     ${color}Down: ${downspeed wlan0}
     Total Down: ${totaldown wlan0}
     ${color3}Up: ${upspeed wlan0}
     Total Up: ${totalup wlan0}
     ${color2}AP: ${wireless_essid wlan0} ${goto 125}Speed: ${wireless_bitrate wlan0}
     Mode: ${wireless_mode wlan0} ${goto 125}Quality: ${wireless_link_qual_perc wlan0}%
    
    
    
    
    
    
     ${font 6x10:bold:size=7}${color4}open ports:   ${tcp_portmon 1 65535 count}
     ${color4}${offset 10}URL${goto 220}PORT${font}
     ${color}${tcp_portmon 1 65535 rhost 0} ${goto 220} ${tcp_portmon 1 65535 rport 0}
     ${tcp_portmon 1 65535 rhost 1} ${goto 220} ${tcp_portmon 1 65535 rport 1}
     ${tcp_portmon 1 65535 rhost 2} ${goto 220} ${tcp_portmon 1 65535 rport 2}
     ${tcp_portmon 1 65535 rhost 3} ${goto 220} ${tcp_portmon 1 65535 rport 3}
     ${tcp_portmon 1 65535 rhost 4} ${goto 220} ${tcp_portmon 1 65535 rport 4}
     ${tcp_portmon 1 65535 rhost 5} ${goto 220} ${tcp_portmon 1 65535 rport 5}
     ${tcp_portmon 1 65535 rhost 6} ${goto 220} ${tcp_portmon 1 65535 rport 6}
     ${tcp_portmon 1 65535 rhost 7} ${goto 220} ${tcp_portmon 1 65535 rport 7}
     ${tcp_portmon 1 65535 rhost 8} ${goto 220} ${tcp_portmon 1 65535 rport 8}
     ${tcp_portmon 1 65535 rhost 9} ${goto 220} ${tcp_portmon 1 65535 rport 9}
    
    # ${color3}${tcp_portmon 1 65535 rip  0}${alignr 1}${tcp_portmon 1 65535 rport  0}
    # ${tcp_portmon 1 65535 rip  1}${alignr 1}${tcp_portmon 1 65535 rport  1}
    # ${tcp_portmon 1 65535 rip  2}${alignr 1}${tcp_portmon 1 65535 rport  2}
    # ${tcp_portmon 1 65535 rip  3}${alignr 1}${tcp_portmon 1 65535 rport  3}
    # ${tcp_portmon 1 65535 rip  4}${alignr 1}${tcp_portmon 1 65535 rport  4}
    # ${tcp_portmon 1 65535 rip  5}${alignr 1}${tcp_portmon 1 65535 rport  5}
    # ${tcp_portmon 1 65535 rip  6}${alignr 1}${tcp_portmon 1 65535 rport  6}
    # ${tcp_portmon 1 65535 rip  7}${alignr 1}${tcp_portmon 1 65535 rport  7}
    # ${tcp_portmon 1 65535 rip  8}${alignr 1}${tcp_portmon 1 65535 rport  8}
    # ${tcp_portmon 1 65535 rip  9}${alignr 1}${tcp_portmon 1 65535 rport  9}
    Another little trick used in the conky above:

    Code:
    TEXT
    
    ${font monofur:bold:size=12}Putting Large and Small text
    on the same line:
    
     ${membar 0,50} ${color5}This: ${color}${membar 0,50}${font}
     ${color4}TOP MEM${goto 170}${font 6x10:bold:size=12}${color2}DISKS${font}
     ${color}${top_mem name 1}${goto 60}${top_mem pid 1}${goto 90}${top_mem mem 1}%${goto 165}${color3}/home${goto 205}${fs_used /home}
     ${color}${top_mem name 2}${goto 60}${top_mem pid 2}${goto 90}${top_mem mem 2}%${goto 165}${color3}/${goto 205}${fs_used /}
     ${color}${top_mem name 3}${goto 60}${top_mem pid 3}${goto 90}${top_mem mem 3}%
    
     ${font monofur:bold:size=12}${membar 0,50} ${color5}vs this: ${color}${membar 0,50}${font}
     ${goto 170}${font 6x10:bold:size=12}${color2}DISKS${font}${goto 5}${color4}TOP MEM
     ${color}${top_mem name 1}${goto 60}${top_mem pid 1}${goto 90}${top_mem mem 1}%${goto 165}${color3}/home${goto 205}${fs_used /home}
     ${color}${top_mem name 2}${goto 60}${top_mem pid 2}${goto 90}${top_mem mem 2}%${goto 165}${color3}/${goto 205}${fs_used /}
     ${color}${top_mem name 3}${goto 60}${top_mem pid 3}${goto 90}${top_mem mem 3}%
    The winner is the bottom one.
    Attached Images Attached Images
    Last edited by Sector11; November 1st, 2013 at 11:45 PM.

  3. #22373
    Join Date
    Jun 2005
    Location
    Where?
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: Post your .conkyrc files w/ screenshots

    Well still playing with this.
    Attached Images Attached Images
    “Those who desire to give up freedom in order to gain security will not have, nor do they deserve, either one" Benjamin Franklin

  4. #22374
    Join Date
    Aug 2013
    Beans
    5

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Sector11 View Post
    OPINION: You should have kept the default colour and used it for the colour you used the most: color1 in your case.

    A few things for you to know:

    1. Once you call a ${font} that font remains in affect until:
    - - ${font} - you turn it off at which point the "default_font" (xftfont 6x10:size=8 - in your case - that you do not use at all) becomes the font that stays in affect until changed
    - - ${font 6x10:bold:size=12} --- you change the font

    So likes like:
    Code:
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 1} ${goto 220} ${tcp_portmon 1 65535 rport 1}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 2} ${goto 220} ${tcp_portmon 1 65535 rport 2}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 3} ${goto 220} ${tcp_portmon 1 65535 rport 3}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 4} ${goto 220} ${tcp_portmon 1 65535 rport 4}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 5} ${goto 220} ${tcp_portmon 1 65535 rport 5}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 6} ${goto 220} ${tcp_portmon 1 65535 rport 6}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 7} ${goto 220} ${tcp_portmon 1 65535 rport 7}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 8} ${goto 220} ${tcp_portmon 1 65535 rport 8}
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 9} ${goto 220} ${tcp_portmon 1 65535 rport 9}
    can become:
    Code:
    ${goto 5}${font 6x10:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rhost 1} ${goto 220} ${tcp_portmon 1 65535 rport 1}
    ${goto 5}${tcp_portmon 1 65535 rhost 2} ${goto 220} ${tcp_portmon 1 65535 rport 2}
    ${goto 5}${tcp_portmon 1 65535 rhost 3} ${goto 220} ${tcp_portmon 1 65535 rport 3}
    ${goto 5}${tcp_portmon 1 65535 rhost 4} ${goto 220} ${tcp_portmon 1 65535 rport 4}
    ${goto 5}${tcp_portmon 1 65535 rhost 5} ${goto 220} ${tcp_portmon 1 65535 rport 5}
    ${goto 5}${tcp_portmon 1 65535 rhost 6} ${goto 220} ${tcp_portmon 1 65535 rport 6}
    ${goto 5}${tcp_portmon 1 65535 rhost 7} ${goto 220} ${tcp_portmon 1 65535 rport 7}
    ${goto 5}${tcp_portmon 1 65535 rhost 8} ${goto 220} ${tcp_portmon 1 65535 rport 8}
    ${goto 5}${tcp_portmon 1 65535 rhost 9} ${goto 220} ${tcp_portmon 1 65535 rport 9}
    colour is the same so you don't need:

    Code:
    ${color1}command ${color1}command ${color1}command
    this is the same:
    Code:
    ${color1}command command command
    Just for fun ... tidied up the conky code. Call it: andy.brown.conky and try it...
    Great info. Will have to try and keep in mind (I usually leave links to important info in a txt file, due in part to my short term memory loss).

    Thanks Sector11
    AndyOpie150

  5. #22375
    Join Date
    Aug 2013
    Beans
    5

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by runrickus View Post
    Well still playing with this.
    What! No conky code to go with that cool looking attachment?

  6. #22376
    Join Date
    Apr 2011
    Location
    Mystletainn Kick!
    Beans
    4,156
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by runrickus View Post
    Well still playing with this.
    I take it that's the CPU temperature limit and not what you're running it at.
    120 celcius.
    Splat Double Splat Triple Splat
    Earn Your Keep
    Don't mind me, I'm only passing through.
    Once in a blue moon, I'm actually helpful
    .

  7. #22377
    Join Date
    Feb 2010
    Location
    SR11 Cockpit
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Andy_Browning View Post
    What! No conky code to go with that cool looking attachment?
    I was about to say the same thing.

    Quote Originally Posted by deadflowr View Post
    I take it that's the CPU temperature limit and not what you're running it at.
    120 celcius.
    Yea, scary!

    I'm looking at an old AMD Athlon 64 that I have on my computer desk. It's stuck in the 'sponge-like' material the new AMD Athlon X3 came in.

    Reason - It got fried due to overheating. Happened too fast for me to save it. Now it's a lightweight paperweight on my computer desk, a reminder to check things more often!

    (especially after a volcano dumps a ton of ash on us that clogs the fins of a heat sink!)

  8. #22378
    Join Date
    Jul 2012
    Location
    Oklahoma, USA
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by deadflowr View Post
    I take it that's the CPU temperature limit and not what you're running it at.
    120 celcius.

    @ runrickus

    Yeah, if you are running at 120 degrees Celsius, you might have a bit of an issue. Perhaps its actually reporting degrees Fahrenheit, which would be about right. Either way you will need to look into that pretty quick.




    Who's Awesome? You're Awesome.

  9. #22379
    Join Date
    Jul 2012
    Location
    Oklahoma, USA
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Sector11 View Post
    I was about to say the same thing.



    Yea, scary!

    I'm looking at an old AMD Athlon 64 that I have on my computer desk. It's stuck in the 'sponge-like' material the new AMD Athlon X3 came in.

    Reason - It got fried due to overheating. Happened too fast for me to save it. Now it's a lightweight paperweight on my computer desk, a reminder to check things more often!

    (especially after a volcano dumps a ton of ash on us that clogs the fins of a heat sink!)
    Perhaps I should write a bash script for Conky to shutdown the computer when it reads above a certain Temp... or is there already one out there?
    Who's Awesome? You're Awesome.

  10. #22380
    Join Date
    Feb 2010
    Location
    SR11 Cockpit
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Petro Dawg View Post
    Perhaps I should write a bash script for Conky to shutdown the computer when it reads above a certain Temp... or is there already one out there?
    Well there is one that changes the colour of the output at ceatain temps ... by Crinos512 colorize.sh maybe that could be modified to use: /sbin/poweroff

    I use that in my OB menu to shut down.

Page 2238 of 2284 FirstFirst ... 12381738213821882228223622372238223922402248 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •