Page 2184 of 2291 FirstFirst ... 1184168420842134217421822183218421852186219422342284 ... LastLast
Results 21,831 to 21,840 of 22909

Thread: Post your .conkyrc files w/ screenshots

  1. #21831
    Join Date
    Jul 2006
    Location
    Gujranwala, Pakistan
    Beans
    139
    Distro
    Ubuntu

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Sector11 View Post
    Can you repost this conky code along with the lines that produce the images you used. No other code necessary.

    If it works here, my "guess" is it has to do with the new Ubuntu.
    These are the same lines that I used in 12.04. The red screenshot is Ubuntu 12.04 and the same code works fine in it.

  2. #21832
    Join Date
    Feb 2010
    Location
    SR11 Cockpit
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by sbjaved View Post
    These are the same lines that I used in 12.04. The red screenshot is Ubuntu 12.04 and the same code works fine in it.
    I don't doubt that at all, but you did not include the lines below

    Code:
    TEXT
    that produced the output for these images:



    I want to try the lines you use.

    Mine are:

    Code:
    TEXT
    other conky commands here
    Network ${color7}${hr}${color}
    Dn${goto 40}${downspeedgraph eth0 14,130 0000ff fff000 5 -lt}${alignr 5}${color5}${downspeedf eth0}${color}
    Up${goto 40}${upspeedgraph eth0 14,130 fff000 0000ff 5 -lt}${alignr 5}${color5}${upspeedf eth0}${color}
    more conky commands here
    And maybe "everything" below TEXT --- unless that oversized N in the image is from a wallpaper.
    Attached Images Attached Images
    Last edited by Sector11; May 1st, 2013 at 06:25 PM.

  3. #21833
    Join Date
    May 2013
    Beans
    0

    Re: Post your .conkyrc files w/ screenshots

    @Sector11

    Thanks for the response. Some of the exact matches in His config wouldn't be useful such as the 8 core CPU monitor. Thanks for all of the info, I'll reach out to robgraves for more info. Ill re-post with a finished product .

  4. #21834
    Join Date
    Feb 2010
    Location
    SR11 Cockpit
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    @ gixxer675

    If you can't contact him, come back and well see what we can do. Check out the "Setting Up Conky" links in my sig as well.

  5. #21835
    Join Date
    Oct 2008
    Beans
    3,509

    Re: Post your .conkyrc files w/ screenshots

    @gixxer675

    Here's one similar you could build on.
    Code:
    # Force UTF8? note that UTF8 support required XFT
    override_utf8_locale yes
    
    # Use Xft?
    use_xft yes
    
    xftfont Droid Sans:size=8
    xftalpha 0.8
    text_buffer_size 2048
    background no
    # Update interval in seconds
    update_interval 1
    
    # This is the number of times Conky will update before quitting.
    # Set to zero to run forever.
    total_run_times 0
    
    # Create own window instead of using desktop (required in nautilus)
    own_window yes
    own_window_transparent yes
    own_window_type normal
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    
    # Use double buffering (reduces flicker, may not work for everyone)
    double_buffer yes
    
    # Minimum size of text area
    minimum_size 182 0
    maximum_width 182
    
    # Draw shades?
    draw_shades no
    default_color D6D6D6 #4D4D4D
    # Draw outlines?
    draw_outline no
    
    # Draw borders around text
    draw_borders no
    
    # Stippled borders?
    stippled_borders 0
    
    # border margins
    border_inner_margin 5
    border_outer_margin 3
    
    # border width
    border_width 1
    
    # Text alignment, other possible values are commented
    #alignment top_left
    alignment top_right
    #alignment bottom_left
    #alignment bottom_right
    
    # Gap between borders of screen and text
    # same thing as passing -x at command line
    gap_x 25
    gap_y 40
    
    # Set default bar size
    default_bar_size 8 60
    
    TEXT
    SYSTEM ${hr 2}
    ${goto 6}${voffset 6}${font OpenLogos:size=22}u${font}${goto 36}${voffset -18}${pre_exec cat /etc/issue.net} $machine
    ${goto 36}Kernel: ${kernel}
    ${goto 36}Conky: ${conky_version}
    ${hr 2}
    
    #CPU
    ${goto 6}${font StyleBats:size=16}A${font}${voffset -4}${goto 32}CPU1: ${cpu cpu0}% ${alignr}${cpubar cpu0 8,60}
    ${goto 6}${voffset 4}${font StyleBats:size=16}A${font}${voffset -4}${goto 32}CPU2: ${cpu cpu1}% ${alignr}${cpubar cpu1 8,60}
    #${goto 6}${voffset 4}${font StyleBats:size=16}A${font}${voffset -4}${goto 32}CPU3: ${cpu cpu2}% ${alignr}${cpubar cpu2 8,60}
    #${goto 6}${voffset 4}${font StyleBats:size=16}A${font}${voffset -4}${goto 32}CPU4: ${cpu cpu3}% ${alignr}${cpubar cpu3 8,60}
    #
    #RAM
    ${goto 6}${voffset 4}${font StyleBats:size=16}g${font}${voffset -4}${goto 32}RAM: ${mem} ${alignr}${membar 8,60}
    #
    #Disk
    ${goto 6}${voffset 4}${font StyleBats:size=16}x${font}${voffset -4}${goto 32}DISK: ${diskio}${alignr}${diskiograph 8,60 F57900 FCAF3E}
    #
    #Swap
    ${goto 6}${voffset 4}${font StyleBats:size=16}j${font}${voffset -4}${goto 32}SWAP: $swapperc% ${alignr}${swapbar 8,60}
    #
    #Battery
    #${goto 6}${voffset 4}${font StyleBats:size=16}8${font}${voffset -4}${goto 32}BATT: ${exec acpi | awk '{print $4}' | tr -d '[=,=]'}${alignr}${execibar 30 acpi | awk '{print $4}' | tr -d '[=,=]'}
    #
    #CPU1 Temp
    ${goto 6}${voffset 4}${font Devil inside:size=16}1${font}${voffset -4}${goto 32}CPU Temp: ${alignr}${exec sensors it8720-isa-0228 | grep temp1 | awk '{print $2}' | cut -c2-3}°C
    #
    #CPU2 Temp
    #${goto 6}${voffset 4}${font Devil inside:size=16}1${font}${voffset -4}${goto 32}CPU2 Temp: ${alignr}${exec sensors | grep 'Core 1' | awk '{print $3}' | cut -c2-3}°C
    #
    #Motherboard Temp
    #${goto 5}${voffset 4}${font Devil inside:size=16}x${font}${voffset -4}${goto 32}Mother Temp: ${alignr}${exec sensors | grep 'MB Temperature' | cut -c19-20}°C / ${color #FCAF3E}${exec sensors | grep 'MB Temperature' | cut -c37-38}°C$color
    #
    #HD Temp
    ${goto 4.5}${voffset 2}${font ConkySymbols:size=13}k${font}${voffset -4}${goto 32}HD Temp:${alignr}${exec hddtemp /dev/sdb -n}°C
    #
    #Fan Speed
    #${goto 6}${font Martin Vogel's Symbols:size=16}j${font}${voffset -4}${goto 32}Fan Speed: ${alignr}${exec sensors | grep 'RPM'| cut -c16-25}
    #
    #Uptime
    ${goto 6}${voffset 4}${font StyleBats:size=16}q${font}${voffset -4}${goto 32}Uptime: ${alignr}${uptime}
    #
    #Processes Running
    ${goto 6}${voffset 4}${font StyleBats:size=16}k${font}${voffset -4}${goto 32}Processes: ${alignr}$processes ($running_processes running)
    #
    #Top 4 Processes
    ${goto 7.5}${voffset 4}${font Poky:size=15}a${font}${goto 32}${voffset -10}Highest: ${alignr 13}CPU${alignr}RAM
    ${goto 32}${voffset -5.5}${hr 1}
    ${voffset -1}${goto 32}${top name 1} ${goto 124}${top cpu 1}${alignr }${top mem 1}
    ${voffset -1}${goto 32}${top name 2} ${goto 124}${top cpu 2}${alignr }${top mem 2}
    ${voffset -1}${goto 32}${top name 3} ${goto 124}${top cpu 3}${alignr }${top mem 3}
    ${voffset -1}${goto 32}${top name 4} ${goto 124}${top cpu 4}${alignr }${top mem 4}
    
    ${voffset -1}DATE ${hr 2}
    ${alignc 35}${font LCDMono Bold:size=26}${time %l:%M }${font}
    ${alignc}${time %A %d %B}
    
    ${voffset -1}HD ${hr 2}
    ${goto 3}${voffset 4}${font Poky:size=16}H${font}${goto 29}${voffset -11} Root: ${fs_used_perc /}%${alignr}${fs_size /}
    ${goto 29} Free: ${fs_free /}${alignr}${fs_bar 8,60 /}
    #${goto 3}${voffset 8}${font Poky:size=16}H${font}${goto 29}${voffset -11} Home: ${fs_used_perc /home}%${alignr}${fs_size /home}
    #${goto 29} Free: ${fs_free /home}${alignr}${fs_bar 8,60 /home}
    
    ${voffset -1}NETWORK ${hr 2}
    ${if_up wlan0}
    ${font Poky:size=14}Y${font}${goto 32}${voffset -8}SSID: ${wireless_essid wlan0}
    ${goto 32}Signal: ${wireless_link_qual wlan0}% ${alignr}${wireless_link_bar 8,60 wlan0}
    ${voffset 4}${font VariShapes Solid:size=14}q${font}${goto 32}${voffset -6}Up: ${upspeed wlan0}${font} ${alignr}${upspeedgraph wlan0 8,60 F57900 FCAF3E}
    ${goto 32}Total: ${totalup wlan0}
    ${voffset 4}${font VariShapes Solid:size=14}Q${font}${goto 32}${voffset -6}Down: ${downspeed wlan0}${font} ${alignr}${downspeedgraph wlan0 8,60 F57900 FCAF3E}
    ${goto 32}Total: ${totaldown wlan0}
    ${voffset 4}${font Poky:size=13}w${font}${goto 32}${voffset -8}Local IP: ${alignr}${addr wlan0}
    ${goto 32}Public IP: ${alignr}${execi 3600 curl ifconfig.me}
    # |--ETH0
    ${else}${if_up eth0}
    ${voffset -13}${font VariShapes Solid:size=14}q${font}${goto 32}${voffset -6}Up: ${upspeed eth0}${font} ${alignr}${upspeedgraph eth0 8,60 F57900 FCAF3E}
    ${goto 32}Total: ${totalup eth0}
    ${voffset -2}${font VariShapes Solid:size=14}Q${font}${goto 32}${voffset -6}Down: ${downspeed eth0}${font} ${alignr}${downspeedgraph eth0 8,60 F57900 FCAF3E}
    ${goto 32}Total: ${totaldown eth0}
    ${voffset -2}${font Poky:size=13}w${font}${goto 32}${voffset -4}Local IP: ${alignr}${addr eth0}
    ${goto 32}Public IP: ${alignr}${execi 3600 curl ifconfig.me}
    # |--PPP0
    ${endif}${else}${if_up ppp0}
    ${voffset -13}${font VariShapes Solid:size=14}q${font}${goto 32}${voffset -6}Up: ${upspeed ppp0}${font} ${alignr}${upspeedgraph ppp0 8,60 F57900 FCAF3E}
    ${goto 32}Total: ${totalup ppp0}
    ${voffset -2}${font VariShapes Solid:size=14}Q${font}${goto 32}${voffset -6}Down: ${downspeed ppp0}${font} ${alignr}${downspeedgraph ppp0 8,60 F57900 FCAF3E}
    ${goto 32}Total: ${totaldown ppp0}
    ${voffset -2}${font Poky:size=13}w${font}${goto 32}${voffset -4}Local IP: ${alignr}${addr ppp0}
    ${endif}${else}${voffset 4}${font PizzaDude Bullets:size=12}4${font}${goto 32}Network Unavailable${endif}${endif}
    ${hr 2}
    Attached Images Attached Images

  6. #21836
    Join Date
    May 2013
    Beans
    0

    Re: Post your .conkyrc files w/ screenshots

    @Sector11:

    Sounds great! Thanks for the assistance!

    @stinkeye:

    That is a very appealing design and just about what I'm looking for. Are any additional font packs needed that you know? (I'll give it a shot when I get home!)

    Edit: I just needed to read, looks like "xftfont" . I would take the guess that "devil inside" font is a style for the aforementioned "xftfont" pack?
    Last edited by gixxer675; May 1st, 2013 at 07:58 PM.

  7. #21837
    Join Date
    Oct 2008
    Beans
    3,509

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by gixxer675 View Post
    @Sector11:

    Sounds great! Thanks for the assistance!

    @stinkeye:

    That is a very appealing design and just about what I'm looking for. Are any additional font packs needed that you know? (I'll give it a shot when I get home!)

    Edit: I just needed to read, looks like "xftfont" . I would take the guess that "devil inside" font is a style for the aforementioned "xftfont" pack?
    The attached archive should contain all the fonts needed for the conkyrc.
    • OpenLogos
    • StyleBats
    • Devil inside
    • ConkySymbols
    • Poky
    • LCDMono
    • VariShapes Solid


    Extract to ~/.fonts
    Attached Files Attached Files

  8. #21838
    Join Date
    Feb 2010
    Location
    SR11 Cockpit
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    You the man stinkeye! Well done.

  9. #21839
    Join Date
    Jul 2006
    Location
    Gujranwala, Pakistan
    Beans
    139
    Distro
    Ubuntu

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Sector11 View Post
    I don't doubt that at all, but you did not include the lines below

    Code:
    TEXT
    that produced the output for these images:



    I want to try the lines you use.

    Mine are:

    Code:
    TEXT
    other conky commands here
    Network ${color7}${hr}${color}
    Dn${goto 40}${downspeedgraph eth0 14,130 0000ff fff000 5 -lt}${alignr 5}${color5}${downspeedf eth0}${color}
    Up${goto 40}${upspeedgraph eth0 14,130 fff000 0000ff 5 -lt}${alignr 5}${color5}${upspeedf eth0}${color}
    more conky commands here
    And maybe "everything" below TEXT --- unless that oversized N in the image is from a wallpaper.
    Sure. Here is my entire conkyrc:

    Code:
    # Create own window instead of using desktop (required in nautilus)
    own_window_class Conky
    own_window yes
    own_window_type desktop
    own_window_transparent yes
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    own_window_argb_visual yes
    # own_window_argb_value 00000000
    # own_window_colour 000000
    
    # Use double buffering (reduces flicker, may not work for everyone)
    double_buffer yes
    
    # fiddle with window
    use_spacer none
    use_xft yes
    
    # Update interval in seconds
    update_interval 1.0
    
    # Minimum size of text area
    minimum_size 345 620
    
    maximum_width 345
    
    # text_buffer_size 8096
    
    # max_user_text 90000
    
    # Draw shades?
    draw_shades no
    
    # Text stuff
    draw_outline no # amplifies text if yes
    draw_borders no
    xftfont Droid Sans Mono:size=9
    uppercase no # set to yes if you want all text to be in uppercase
    
    # Stippled borders?
    stippled_borders 0
    
    # border margins
    border_inner_margin 0
    
    # border width
    border_width 0
    
    # Default colors and also border colors, grey90 == #e5e5e5
    default_color white
    
    # Text alignment, other possible values are commented
    #alignment top_left
    alignment top_right
    #alignment bottom_left
    #alignment bottom_right
    
    # Gap between borders of screen and text
    gap_x 10
    gap_y 30
    
    # stuff after ‘TEXT’ will be formatted on screen
    
    TEXT
    ${color grey}GENERAL ${hr 2}$color
    Host: $nodename ${execpi 45 /home/saad/Code/pt.py}
    ${voffset -60}Kernel: $kernel
    Uptime: $uptime
    Conky $conky_version
    
    ${color green}Pakistan$color     |  ${color red}USA$color
    ${time %a, %d %b}  |  ${tztime UTC+4 %a, %d %b}${execpi 3600 /home/saad/Code/holidays.py}
    ${time %r}  |  ${tztime UTC+4 %r}
    
    ${color grey}CPU ${hr 2}$color
    Name: ${execi 1500 cat /proc/cpuinfo | grep 'model name' | awk 'NR > 1 { exit }; 1' | sed -e 's/model name.*: //'} 
    Avg Usage: ${if_match ${cpu cpu0} >= 90}${color red}${cpu cpu0}%${color}${endif}${if_match ${cpu cpu0} < 90}${cpu cpu0}%${endif} | \
    Active Processes: $running_processes | \
    Temp: ${if_match ${hwmon temp 1} <= 59}${color green}${hwmon temp 1}C${color}${endif}${if_match ${hwmon temp 1} >= 60}${if_match ${hwmon temp 1} <=70}${color yellow}${hwmon temp 1}C${color}${endif}${endif}${if_match ${hwmon temp 1} >= 71}${if_match ${hwmon temp 1} <=89}${color F57900}${hwmon temp 1}C${color}${endif}${endif}${if_match ${hwmon temp 1} >= 90}${color red}${hwmon temp 1}C${color}${endif}
    Core1: ${if_match ${cpu cpu1} < 50}${cpu cpu1}%${endif}${if_match ${cpu cpu1} >= 50}${if_match ${cpu cpu1} < 90}${color yellow}${cpu cpu1}%${color}${endif}${endif}${if_match ${cpu cpu1} >= 90}${color red}${cpu cpu1}%${color}${endif} | \
    Core2: ${if_match ${cpu cpu2} < 50}${cpu cpu2}%${endif}${if_match ${cpu cpu2} >= 50}${if_match ${cpu cpu2} < 90}${color yellow}${cpu cpu2}%${color}${endif}${endif}${if_match ${cpu cpu2} >= 90}${color red}${cpu cpu2}%${color}${endif} | \
    Core3: ${if_match ${cpu cpu3} < 50}${cpu cpu3}%${endif}${if_match ${cpu cpu3} >= 50}${if_match ${cpu cpu3} < 90}${color yellow}${cpu cpu3}%${color}${endif}${endif}${if_match ${cpu cpu3} >= 90}${color red}${cpu cpu3}%${color}${endif} | \
    Core4: ${if_match ${cpu cpu4} < 50}${cpu cpu4}%${endif}${if_match ${cpu cpu4} >= 50}${if_match ${cpu cpu4} < 90}${color yellow}${cpu cpu4}%${color}${endif}${endif}${if_match ${cpu cpu4} >= 90}${color red}${cpu cpu4}%${color}${endif}
    Core5: ${if_match ${cpu cpu5} < 50}${cpu cpu5}%${endif}${if_match ${cpu cpu5} >= 50}${if_match ${cpu cpu5} < 90}${color yellow}${cpu cpu5}%${color}${endif}${endif}${if_match ${cpu cpu5} >= 90}${color red}${cpu cpu5}%${color}${endif} | \
    Core6: ${if_match ${cpu cpu6} < 50}${cpu cpu6}%${endif}${if_match ${cpu cpu6} >= 50}${if_match ${cpu cpu6} < 90}${color yellow}${cpu cpu6}%${color}${endif}${endif}${if_match ${cpu cpu6} >= 90}${color red}${cpu cpu6}%${color}${endif} | \
    Core7: ${if_match ${cpu cpu7} < 50}${cpu cpu7}%${endif}${if_match ${cpu cpu7} >= 50}${if_match ${cpu cpu7} < 90}${color yellow}${cpu cpu7}%${color}${endif}${endif}${if_match ${cpu cpu7} >= 90}${color red}${cpu cpu7}%${color}${endif} | \
    Core8: ${if_match ${cpu cpu8} < 50}${cpu cpu8}%${endif}${if_match ${cpu cpu8} >= 50}${if_match ${cpu cpu8} < 90}${color yellow}${cpu cpu8}%${color}${endif}${endif}${if_match ${cpu cpu8} >= 90}${color red}${cpu cpu8}%${color}${endif}
    #${cpugraph cpu0 000000 ffffff}
    
    ${color grey}BATTERY:$color ${if_match ${battery_percent BAT0} <= 9}${color red}${battery_percent BAT0}%${color} ${battery_bar BAT0}${endif}${if_match ${battery_percent BAT0} >= 10}${if_match ${battery_percent BAT0} <=49}${color F57900}${battery_percent BAT0}%${color} ${battery_bar BAT0}${endif}${endif}${if_match ${battery_percent BAT0} >= 50}${if_match ${battery_percent BAT0} <=79}${color yellow}${battery_percent BAT0}%${color} ${battery_bar BAT0}${endif}${endif}${if_match ${battery_percent BAT0} >= 80}${if_match ${battery_percent BAT0} <=99}${color green}${battery_percent BAT0}%${color} ${battery_bar  BAT0}${endif}${endif}${if_match ${battery_percent BAT0} >= 100}${battery_percent BAT0}%$font ${battery_bar BAT0}${endif}
    ${execi 10 /home/saad/Code/batt.sh}
    ${execpi 60 /home/saad/Code/batt_log.py}
    
    ${color grey}SYSTEM MONITOR ${hr 2}$color
    NAME              PID    CPU     MEM
    ${top name 1} ${top pid 1} ${top cpu 1}% ${top mem 1}%
    ${top name 2} ${top pid 2} ${top cpu 2}% ${top mem 2}%
    ${top name 3} ${top pid 3} ${top cpu 3}% ${top mem 3}%
    
    ${color grey}MEMORY / DISK (Temp: ${execi 60 hddtemp /dev/sda | tail -c 6}) ${hr 2}$color
    RAM: $mem/$memmax ${membar 6}$color
    Root: ${fs_free /}/${fs_size /} ${fs_bar 6 /}
    OS: ${fs_free /media/OS}/${fs_size /media/OS} ${fs_bar 6 /media/OS}
    ${if_mounted /media/MULTIBOOT}MULTIBOOT: ${fs_free /media/MULTIBOOT}/${fs_size /media/MULTIBOOT} ${fs_bar 6 /media/MULTIBOOT}${endif}
    ${if_mounted /media/SAAD}SAAD: ${fs_free /media/SAAD}/${fs_size /media/SAAD} ${fs_bar 6 /media/SAAD}${endif}
    ${if_existing /proc/net/route wlan0}${color grey}NETWORK ($color${color green}${wireless_essid wlan0}$color${color grey}) ${hr 2}$color
    Down: $color${downspeed wlan0} /s ${alignr}Up: ${upspeed wlan0} /s
    ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0
    25,140 000000 00ff00}$color
    Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0}
    Inbound: ${tcp_portmon 1 32767 count} Outbound: ${tcp_portmon 32768
    61000 count}${alignr}${wireless_ap wlan0}
    Public IP: ${execi 60 /home/saad/Code/conkyIp}${alignr}${execi 15 /home/saad/Code/wireless_thoroughput.sh}
    Local IP: ${addr wlan0}${alignr}${execpi 1800  vnstat -i wlan0 -m | grep "`date +"%b '%y"`" | awk '{print $1, $3 $4}'}
    Signal: ${wireless_link_qual_perc wlan0}%\
    ${alignr}${if_up wlan0}${exec nm-tool | grep DNS | awk -vORS=, '{print $2}' | sed 's/,$//'}$endif
    ${else}${if_existing /proc/net/route eth0}${color grey}NETWORK$color (${color #40E0D0}Ethernet$color) ${color grey}${hr 2}$color
    Down: $color${downspeed eth0} /s ${alignr}Up: ${upspeed eth0} /s
    ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0
    25,140 000000 00ff00}$color
    Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0}
    Inbound: ${tcp_portmon 1 32767 count} Outbound: ${tcp_portmon 32768
    61000 count}${alignr}Total: ${tcp_portmon 1 65535 count}
    Public IP: ${execi 60 /home/saad/Code/conkyIp}${alignr}${execi 15 /home/saad/Code/eth_thoroughput.sh}
    Local IP: ${addr eth0}${alignr}${execpi 1800  vnstat -i eth0 -m | grep "`date +"%b '%y"`" | awk '{print $1, $3 $4}'}
    DNS: ${if_up eth0}${exec nm-tool | grep DNS | awk -vORS=, '{print $2}' | sed 's/,$//'}$endif\
    ${alignr}${execi 99999 cat /sys/class/net/eth0/address}${endif}

  10. #21840
    Join Date
    Oct 2008
    Beans
    3,509

    Re: Post your .conkyrc files w/ screenshots

    @ sbjaved
    I know Sector11 (Hi) is looking at your config but as I am using the same desktop,
    I'll let you know your config displays fine here.
    Code:
    glen@Raring:~$ conky --version
    Conky 1.9.0
    Attached Images Attached Images

Page 2184 of 2291 FirstFirst ... 1184168420842134217421822183218421852186219422342284 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •