Thank you!Originally Posted by Sector11
Found one I loved.
Can anyone help me set me up this conky? Tell me what do I need to install and set up?
Thanks in advance.Code:http://fenouille84.deviantart.com/art/Conky-Geek-inside-198858366
Gee! These Aren't Roasted!
Thank you!
Found one I loved.
Can anyone help me set me up this conky? Tell me what do I need to install and set up?
Thanks in advance.Code:http://fenouille84.deviantart.com/art/Conky-Geek-inside-198858366
I Ubuntu, Therefore, I Am
Wow, lots to configure.Thank you!
Found one I loved.
Can anyone help me set me up this conky? Tell me what do I need to install and set up?
Thanks in advance.Code:http://fenouille84.deviantart.com/art/Conky-Geek-inside-198858366
Have you any conky knowledge?
FYI it's actually 3 separate conky configs.
Extract the download to find...
- conkyrc1
- conkyrc2
- conkyterm
For a start you can run each config just to have a look.
In terminal...
Just enterCode:conky -c /path/to/conkyconfigfollowed by a space then drag and drop one of the configs in the terminal and press enter.Code:conky -c
There will be lot's of errors and possibly blank space.
I'm off to bed but
I'm sure Sector11 is already looking at the configs.
Last edited by stinkeye; February 7th, 2013 at 06:52 PM.
Gee! These Aren't Roasted!
Well I have fixed the first one, conkyrc1, on the:
And now looking at the second one.Code:use_spacer left
I do not have much knowledge with Conky but I would really love to get this one working with me.
Skinny Soy Caramel Ubuntu
Oh sure use the old "I'm off to bed" excuse to pass it on!Wow, lots to configure.
Have you any conky knowledge?
FYI it's actually 3 separate conky configs.
I'm off to bed but
I'm sure Sector11 is already looking at the configs.
scheech some people
But seeing as you are waaaaaay over there and I'm here
... it fits.
OK Mr. VIC as stinkeye said you can extract them and see if they run one at a time. First do you have conky installed?Thank you!
Found one I loved.
Can anyone help me set me up this conky? Tell me what do I need to install and set up?
Thanks in advance.Code:http://fenouille84.deviantart.com/art/Conky-Geek-inside-198858366
Is it conky-all? <<-- better if it is.Code:sector11 @ sector11 07 Feb 13 | 15:19:54 ~ $ conky -v Conky 1.9.0 compiled Fri May 11 15:54:00 UTC 2012 for Linux 2.6.32-5-amd64 (x86_64) Compiled in features: System config file: /etc/conky/conky.conf Package library path: /usr/lib/conky X11: * Xdamage extension * XDBE (double buffer extension) * Xft * ARGB visual Music detection: * Audacious * MPD * MOC * XMMS2 General: * math * hddtemp * portmon * Curl * RSS * Weather (METAR) * Weather (XOAP) * wireless * support for IBM/Lenovo notebooks * nvidia * eve-online * config-output * Imlib2 * apcupsd * iostats * ncurses * Lua Lua bindings: * Cairo * Imlib2 sector11 @ sector11 07 Feb 13 | 15:19:57 ~ $
I haven't downloaded the conky file yet, just looking that the screenshot.Code:sector11 @ sector11 07 Feb 13 | 15:20:22 ~ $ sudo apt-get install conky-all [sudo] password for sector11: Reading package lists... Done Building dependency tree Reading state information... Done conky-all is already the newest version. The following packages were automatically installed and are no longer required: diffstat dkms quilt Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. sector11 @ sector11 07 Feb 13 | 15:20:44 ~ $ sudo apt-get autoremove Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: diffstat dkms quilt 0 upgraded, 0 newly installed, 3 to remove and 9 not upgraded. After this operation, 1,080 kB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 188176 files and directories currently installed.) Removing quilt ... Removing diffstat ... Removing dkms ... Processing triggers for man-db ... sector11 @ sector11 07 Feb 13 | 15:21:25 ~ $
Left conky:
1. Do you have a dual core or better? - this will show the first two.
2. You'll need to install lm-sensors and hddtemp for temperatures.
- your system will probably be different than the calls for those.
3. is sda5 /root and sda6 /home (minor fixes)
Centre conky:
1. File System SDA - do you have a 3rd partition that could be used there?
2. wlan0 <--- you use that? I use eth0
3. Saints? Will have to check the code. Obviously a French Catholic user.
Right Conky
1. looks like you'll need a few more support programs for that as well.
According to the "screenshot" the desktop is 1440x900 is that your screen resolution?
I'll have to test one at a time on my 1280x1024 screen.
Gee! These Aren't Roasted!
Hi there, and thank you for your reply!Oh sure use the old "I'm off to bed" excuse to pass it on!
scheech some people
But seeing as you are waaaaaay over there and I'm here
... it fits.
OK Mr. VIC as stinkeye said you can extract them and see if they run one at a time. First do you have conky installed?
Is it conky-all? <<-- better if it is.Code:sector11 @ sector11 07 Feb 13 | 15:19:54 ~ $ conky -v Conky 1.9.0 compiled Fri May 11 15:54:00 UTC 2012 for Linux 2.6.32-5-amd64 (x86_64) Compiled in features: System config file: /etc/conky/conky.conf Package library path: /usr/lib/conky X11: * Xdamage extension * XDBE (double buffer extension) * Xft * ARGB visual Music detection: * Audacious * MPD * MOC * XMMS2 General: * math * hddtemp * portmon * Curl * RSS * Weather (METAR) * Weather (XOAP) * wireless * support for IBM/Lenovo notebooks * nvidia * eve-online * config-output * Imlib2 * apcupsd * iostats * ncurses * Lua Lua bindings: * Cairo * Imlib2 sector11 @ sector11 07 Feb 13 | 15:19:57 ~ $
I haven't downloaded the conky file yet, just looking that the screenshot.Code:sector11 @ sector11 07 Feb 13 | 15:20:22 ~ $ sudo apt-get install conky-all [sudo] password for sector11: Reading package lists... Done Building dependency tree Reading state information... Done conky-all is already the newest version. The following packages were automatically installed and are no longer required: diffstat dkms quilt Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. sector11 @ sector11 07 Feb 13 | 15:20:44 ~ $ sudo apt-get autoremove Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: diffstat dkms quilt 0 upgraded, 0 newly installed, 3 to remove and 9 not upgraded. After this operation, 1,080 kB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 188176 files and directories currently installed.) Removing quilt ... Removing diffstat ... Removing dkms ... Processing triggers for man-db ... sector11 @ sector11 07 Feb 13 | 15:21:25 ~ $
Left conky:
1. Do you have a dual core or better? - this will show the first two.
2. You'll need to install lm-sensors and hddtemp for temperatures.
- your system will probably be different than the calls for those.
3. is sda5 /root and sda6 /home (minor fixes)
Centre conky:
1. File System SDA - do you have a 3rd partition that could be used there?
2. wlan0 <--- you use that? I use eth0
3. Saints? Will have to check the code. Obviously a French Catholic user.
Right Conky
1. looks like you'll need a few more support programs for that as well.
According to the "screenshot" the desktop is 1440x900 is that your screen resolution?
I'll have to test one at a time on my 1280x1024 screen.
First yes, conky-all is installed, as well as lm-sensors and hddtemp.
Left conky:
1. Do you have a dual core or better? - Yes I'm using a dual core.
2. You'll need to install lm-sensors and hddtemp for temperatures. - Installed already
3. is sda5 /root and sda6 /home (minor fixes) - Not sure mate. :/
Centre conky:
1. File System SDA - Not really, Ubuntu is using my whole disk.
2. wlan0 <--- you use that? Yea it's wlan0, I always use wireless connections.
3. Saints? This can be removed I guess, if not it can also stay.
Also, my resolution is 1366x768.
Skinny Soy Caramel Ubuntu
OH you are going to have problems with that, the three conkys are wider and taller than your screen.Hi there, and thank you for your reply!
First yes, conky-all is installed, as well as lm-sensors and hddtemp.
Left conky:
1. Do you have a dual core or better? - Yes I'm using a dual core.
2. You'll need to install lm-sensors and hddtemp for temperatures. - Installed already
3. is sda5 /root and sda6 /home (minor fixes) - Not sure mate. :/
Centre conky:
1. File System SDA - Not really, Ubuntu is using my whole disk.
2. wlan0 <--- you use that? Yea it's wlan0, I always use wireless connections.
3. Saints? This can be removed I guess, if not it can also stay.
Also, my resolution is 1366x768.
Here's what I would suggest - grab that conky you like, and run just the left one. It will flow off the bottom you your screen.
Now lm-sensors and hddtemp needs to be set up.
For lm-sensors - answer YES to everything even that last one:
then post the results of:Code:sudo sensors-detect
for hddtemp reconfigure it:Code:sensors
and answer: YES; Enter; NO!Code:sudo dpkg-reconfigure hddtemp
If that worked this should work:
If you see that the command in conky will be:Code:sector11 @ sector11 07 Feb 13 | 16:29:44 ~ $ hddtemp /dev/sda /dev/sda: WDC WD2500AAJS-00VWA0: 37°C sector11 @ sector11 07 Feb 13 | 16:29:59 ~ $ hddtemp -n /dev/sda 37 sector11 @ sector11 07 Feb 13 | 16:30:01 ~ $
${execi 5 hddtemp -n /dev/sda}°
NVIDIA Graphics? So much easier if it is.
It is difficult to create a conky for someone that wants things beyond the generic commands as each machine is different.
You say Ubuntu is using your entire drive
Do /root and /home have separate partitions at least?
If I was you, I'd start small and build as your knowledge increases.
A simple generic conky (with NVIDIA support) and using 'platform' for temps. May not work on all machines ... I'd bet in it.
Save to: ~/.conkyrc2a
Start with: conky -c ~/.conkyrc2a &
The time - 16:52:34 - may show up on your system as 4:52:34 PM if your locale is set to use AM|PM and the date will be 02/07/13 if you are in the US. Those conky time functions grab the info from your locale settings from when you installed Linux.Code:# killall conky && conky -c ~/.conkyrc2a & ## middle right - white text ### Begin Window Settings ################################################## # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type normal own_window_transparent yes own_window_hints undecorated,sticky,below,skip_taskbar,skip_pager #own_window_colour gray own_window_class Conky own_window_title A Default Conky # Use the Xdbe extension? (eliminates flicker) # It is highly recommended to use own window with this one # so double buffer won't be so big. double_buffer yes ### ARGB can be used for real transparency ### NOTE that a composite manager is required for real transparency. ### This option will not work as desired (in most cases) in conjunction with ### own_window_type normal # own_window_argb_visual yes ### When ARGB visuals are enabled, this use this to modify the alpha value ### Use: own_window_type normal ### Use: own_window_transparent no ### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity. # own_window_argb_value 255 minimum_size 235 0 ## width, height #maximum_width 160 ## width gap_x 10 # left-right gap_y 0 # up-down alignment middle_right ################################################### End Window Settings ### ### Font Settings ######################################################### # Use Xft (anti-aliased font and stuff) use_xft yes #xftfont Liberation Sans:size=15 #xftfont Monofur:bold:size=13 xftfont Mono:bold:size=12 # Alpha of Xft font. Must be a value at or between 1 and 0 ### xftalpha 1 # Force UTF8? requires XFT ### override_utf8_locale yes draw_shades yes #### <<<--- yes --- To see it easier on light screens. #default_shade_color black draw_outline no #### <<<--- yes --- Amplifies text if yes default_outline_color black ############################################################################## uppercase no ###################################################### End Font Settings ### ### Color Settings ######################################################### #default_shade_color black #default_outline_color black default_color DCDCDC #220 220 220 Gainsboro color0 8FBC8F #143 188 143 DarkSeaGreen color1 778899 #119 136 153 LightSlateGray color2 FF8C00 #255 140 0 DarkOrange color3 7FFF00 #127 255 0 Chartreuse color4 FFA07A #255 160 122 LightSalmon color5 FFDEAD #255 222 173 NavajoWhite color6 00BFFF # 0 191 255 DeepSkyBlue color7 00FFFF # 0 255 255 Cyan color8 FFFF00 #255 255 0 Yellow color9 FF0000 #255 0 0 Red ##################################################### End Color Settings ### ### Borders Section ######################################################## draw_borders no # Stippled borders? stippled_borders 0 # border margins border_inner_margin 5 border_outer_margin 0 # border width border_width 0 # graph borders draw_graph_borders yes #default_graph_size 15 40 ##################################################### End Borders Secton ### ### Miscellaneous Section ################################################## # Boolean value, if true, Conky will be forked to background when started. background yes # Adds spaces around certain objects to stop them from moving other things # around, this only helps if you are using a mono font # Options: right, left or none use_spacer none # Default and Minimum size is 256 - needs more for single commands that # "call" a lot of text IE: bash scripts text_buffer_size 1028 # Subtract (file system) buffers from used memory? no_buffers yes # change GiB to G and MiB to M short_units yes # Like it says, ot pads the decimals on % values # doesn't seem to work since v1.7.1 pad_percents 2 # Maximum size of user text buffer, i.e. layout below TEXT line in config file # (default is 16384 bytes) # max_user_text 16384 # Desired output unit of all objects displaying a temperature. Parameters are # either "fahrenheit" or "celsius". The default unit is degree Celsius. # temperature_unit Fahrenheit ############################################## End Miscellaneous Section ### update_interval 1 TEXT ${time %T}${alignr 5}${time %x} ${alignc}${uptime}${font monofont:bold:size=10} ${alignc}${kernel} ${hr}${font} ${alignc}${nodename} ${alignr 5}% Used | Total Root ${fs_used_perc /}${alignr 5}${fs_used /} | ${fs_size /} Home ${fs_used_perc /home}${alignr 5}${fs_used /home} | ${fs_size /home} RAM ${memperc}${alignr 5}${mem} | ${memmax} Swap ${swapperc}${alignr 5}${swap} | ${swapmax}${font Monofur:size=6} ${font} CPU % in use ${alignr 5}Avg ${if_match ${cpu cpu0}<10}00${cpu cpu0}\ ${else}${if_match ${cpu cpu0}<100}0${cpu cpu0}\ ${else}${cpu cpu0}${endif}${endif} ${alignc}1 ${if_match ${cpu cpu1}<10}00${cpu cpu1}\ ${else}${if_match ${cpu cpu1}<100}0${cpu cpu1}\ ${else}${cpu cpu1}${endif}${endif}\ 2 ${if_match ${cpu cpu2}<10}00${cpu cpu2}\ ${else}${if_match ${cpu cpu2}<100}0${cpu cpu2}\ ${else}${cpu cpu2}${endif}${endif}${font Mono:size=6} ${font} CPU Fan${alignr 5}${platform f71882fg.2560 fan 1} rpm${font Mono:size=6} ${font} Temperatures ${hr} ${alignc}CPU ${if_match ${platform f71882fg.2560 temp 1}<100} ${platform f71882fg.2560 temp 1}\ ${else}${platform f71882fg.2560 temp 1}${endif}°\ MB ${if_match ${platform f71882fg.2560 temp 2}<100} ${platform f71882fg.2560 temp 2}\ ${else}${platform f71882fg.2560 temp 2}${endif}° ${alignc}GPU ${if_match ${nvidia temp}<100} ${nvidia temp}\ ${else}${nvidia temp}${endif}°\ HD ${if_match ${execi 5 hddtemp -n /dev/sda}<100} ${execi 5 hddtemp -n /dev/sda}\ ${else}${execi 5 hddtemp -n /dev/sda}${endif}° ${alignc}GPU Threshold ${nvidia threshold}°${font Mono:size=6} ${font} NVIDIA ${hr} GPU ${nvidia gpufreq}MHz${alignr 5}MEM ${nvidia memfreq}MHz ${alignc}Image Quality ${nvidia imagequality}${font Monofur:size=6} ${font} DISK Activity ${hr} R${goto 40}${diskiograph_read /dev/sda 14,130 00ffff ff0000 5 -lt}${alignr 5}${diskio_read /dev/sda} W${goto 40}${diskiograph_write /dev/sda 14,130 ff0000 00ffff 5 -lt}${alignr 5}${diskio_write /dev/sda}${font Monofur:size=6} ${font} NETWORK ${hr} Dn${goto 40}${downspeedgraph eth0 14,130 00ffff ff0000 5 -lt}${alignr 5}${downspeedf eth0} Up${goto 40}${upspeedgraph eth0 14,130 ff0000 00ffff 5 -lt}${alignr 5}${upspeedf eth0}
Last edited by Sector11; February 7th, 2013 at 08:57 PM. Reason: Edited out a 3rd CPU
First Cup of Ubuntu
Hi all,
I hope this is the right thread to obtain some help on conky configuration.
To display the free space left on external hard drive I normally use the syntax: "${fs_free /media/Ext-Main}".
Of course, this works only for the drive labeled "Ext-Main", and when I change the drive with another one the conky indicator stops working.
Since in my system the external drive is always "/dev/sdb", and I can use the command "df | grep sdb | sed -re 's/.*% //'" to find the mount point, I wonder if there is a way to combine the output of the command with the "${fs_free }" conky variable to always obtain the free space on /dev/sbd, regardless of the label of the disk (I've tried "${fs_free ${exec df | grep sdb | sed -re 's/.*% //'}}" but it produces the following error: "Conky: statfs '${exec df | grep sdb | sed -re 's/.*% //'}': No such file or directory").
Last edited by maboventi; February 11th, 2013 at 07:44 PM.
Skinny Soy Caramel Ubuntu
Yup, the right place....
mrpeachy wrote a "mounted.lua" script. that will fit what you want I think:
mount.lua
The conky as a sampleCode:--[[partitions for conky by mrpeachy ##instructions ##load script lua_load ~/lua/mounted.lua ## first lua command below text: ## ${lua get_mounted_data interval}, where interval is a number. This starts data gathering ## to get output: ## ${lua mount partition_number data_type text_length}, where partition number is a number ## text_length is optional, lets you specify the max number of characters the function returns. only affects fsys and mount data options ## data_type can be ## total - shows total number of partitions mounted, requires a partition_number also, use 1, could be used in an if_match ## fsys - shows filesystem ## size - shows space used in appropriate units ## free - shows free space in appropriate units ## use% - shows % used ## mount - shows mountpoint TEXT CPU %: ${cpu cpu0} ${lua get_mounted_data 10} TOTAL PARTITIONS MOUNTED: ${lua mount 1 total} FSYS${goto 100}SIZE${goto 200}USED%${goto 300}MOUNT ${lua mount 1 fsys}${goto 100}${lua mount 1 size}${goto 200}${lua mount 1 use%}${goto 300}${lua mount 1 mount 10} ${lua mount 2 fsys}${goto 100}${lua mount 2 size}${goto 200}${lua mount 2 use%}${goto 300}${lua mount 2 mount 10} ${lua mount 3 fsys}${goto 100}${lua mount 3 size}${goto 200}${lua mount 3 use%}${goto 300}${lua mount 3 mount 10} ${lua mount 4 fsys}${goto 100}${lua mount 4 size}${goto 200}${lua mount 4 use%}${goto 300}${lua mount 4 mount 10} ]] conky_start=1 function conky_get_mounted_data(interval) local updates=tonumber(conky_parse("${updates}")) timer=(updates % interval) if timer==0 or conky_start==1 then fsys={} size={} used={} avail={} uperc={} mount={} local file = io.popen("df -h") for line in file:lines() do if string.find(line,"/dev/")~=nil then local s,f,fs=string.find(line,"^([%d%a%p]*)%s") table.insert(fsys,fs) local s,f,sz=string.find(line,"%s*([%d%a%p]*)%s",f) table.insert(size,sz) local s,f,us=string.find(line,"%s*([%d%a%p]*)%s",f) table.insert(used,us) local s,f,av=string.find(line,"%s*([%d%a%p]*)%s",f) table.insert(avail,av) local s,f,up=string.find(line,"%s*([%d%a%p]*)%s",f) table.insert(uperc,up) local s,f,mn=string.find(line,"%s*([%d%a%p]*)%s*$",f) table.insert(mount,mn) end end file:close() conky_start=nil end--timed section return "" end function conky_mount(n,d,c)--n=partition_number,d=data_type,c=number of characters to return d=tostring(d) n=tonumber(n) c=tonumber(c) or 0 if d=="total" then data=#fsys or 1 elseif d=="fsys" then data=fsys[n] or "" if c~=0 then data=string.sub(data,1,c) or "" end elseif d=="size" then data=size[n] or "" elseif d=="used" then data=used[n] or "" elseif d=="free" then data=avail[n] or "" elseif d=="use%" then data=uperc[n] or "" elseif d=="mount" then data=mount[n] or "" if c~=0 then data=string.sub(data,1,c) or "" end else data="check data type" end return data end--end main function
Code:# killall conky && conky -c /media/5/Conky/S11_mrp_FSYS.conky & # To use #! in a conky use: ${exec echo '#!'} ### Begin Window Settings ################################################## # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type normal own_window_transparent yes own_window_hints undecorated,below,skip_taskbar,skip_pager own_window_colour gray own_window_class Conky own_window_title Simple # Use the Xdbe extension? (eliminates flicker) # It is highly recommended to use own window with this one # so double buffer won't be so big. double_buffer yes ### ARGB can be used for real transparency ### NOTE that a composite manager is required for real transparency. ### This option will not work as desired (in most cases) in conjunction with ### own_window_type normal # own_window_argb_visual yes ### When ARGB visuals are enabled, this use this to modify the alpha value ### Use: own_window_type normal ### Use: own_window_transparent no ### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity. # own_window_argb_value 0 minimum_size 260 0 ## width, height maximum_width 260 ## width, usually a good idea to equal minimum width gap_x 10 # left-right gap_y 0 # up-down alignment middle_right ################################################### End Window Settings ### ### Font Settings ######################################################### # Use Xft (anti-aliased font and stuff) use_xft yes #xftfont mono:bold:size=8 xftfont Anonymous Pro:bold:size=8 #xftfont CorporateMonoExtraBold:size=8 # Alpha of Xft font. Must be a value at or between 1 and 0 ### xftalpha 1 # Force UTF8? requires XFT ### override_utf8_locale yes draw_shades no default_shade_color black draw_outline no # amplifies text if yes default_outline_color black uppercase no ###################################################### End Font Settings ### ### Color Settings ######################################################### default_shade_color gray default_outline_color black default_color DCDCDC #220 220 220 Gainsboro color0 8FBC8F #143 188 143 DarkSeaGreen color1 778899 #119 136 153 LightSlateGray color2 FF8C00 #255 140 0 DarkOrange color3 62C2C2 #098 194 194 S11 Light Green #7FFF00 #127 255 0 Chartreuse color4 FFA07A #255 160 122 LightSalmon color5 FFDEAD #255 222 173 NavajoWhite color6 00BFFF # 0 191 255 DeepSkyBlue color7 00FFFF # 0 255 255 Cyan color8 FFFF00 #255 255 0 Yellow color9 B22222 #178 34 34 FireBrick ##################################################### End Color Settings ### ### Borders Section ######################################################## draw_borders no # Stippled borders? stippled_borders 0 # border margins border_inner_margin 5 border_outer_margin 0 # border width border_width 0 # graph borders draw_graph_borders no #yes #default_graph_size 15 40 ##################################################### End Borders Secton ### ### Miscellaneous Section ################################################## # Boolean value, if true, Conky will be forked to background when started. background yes # Adds spaces around certain objects to stop them from moving other things # around, this only helps if you are using a mono font # Options: right, left or none use_spacer none # Default and Minimum size is 256 - needs more for single commands that # "call" a lot of text IE: bash scripts text_buffer_size 1028 # Subtract (file system) buffers from used memory? no_buffers yes # change GiB to G and MiB to M short_units yes # Like it says, ot pads the decimals on % values # doesn't seem to work since v1.7.1 pad_percents 2 # Maximum size of user text buffer, i.e. layout below TEXT line in config file # (default is 16384 bytes) # max_user_text 16384 # Desired output unit of all objects displaying a temperature. Parameters are # either "fahrenheit" or "celsius". The default unit is degree Celsius. # temperature_unit Fahrenheit ############################################## End Miscellaneous Section ### ### LUA Settings ########################################################### ## Above and After TEXT - requires a composite manager or blinks. ## # lua_load /media/5/Conky/LUA/draw-bg.lua #TEXT #${lua conky_draw_bg 10 0 0 0 0 0x000000 0.6} # ## ${lua conky_draw_bg corner_radius x_position y_position width height color alpha} ## ## OR Both above TEXT (No composite manager required - no blinking!) # lua_load /media/5/Conky/LUA/draw-bg.lua lua_draw_hook_pre draw_bg 15 0 0 0 0 0x000000 0.5 # lua_draw_hook_post draw-bg 125 0 0 0 0 0x000000 0.01 # # TEXT # ### mount.lua ################################################################## # ##instructions ##load script ##lua_load ~/path_to/mounted.lua lua_load /media/5/Conky/LUA/mounted.lua ## first lua command below text: ## ${lua get_mounted_data interval}, where interval is a number. This starts data gathering ## to get output: ## ${lua mount partition_number data_type}, where partition number is a number ## data_type can be ## total - shows total number of partitions mounted, requires a partition_number also, use 1, could be used in an if_match ## fsys - shows filesystem ## size - shows space used in appropriate units ## free - shows free space in appropriate units ## use% - shows % used ## mount - shows mountpoint ####################################################### End LUA Settings ### # The all important - How often conky refreshes. # If you have a "Crey" try: 0.2 - smokin' - but watch the CPU useage go UP! update_interval 1 TEXT ${time %H:%M} Running: ${uptime_short}${alignr 5}${time %a %d %b %y} ${color6}${hr}${color} ${alignc}${color3}Hosted by: ${color5}${nodename} ${color6}${hr}${color} ${alignc}${color3}Kernel:${alignr 5}${color5}${kernel} ${color3}CPU ${color5}% ${color7}1: ${color5}${if_match ${cpu cpu1} < 10}00${cpu cpu1}\ ${else}${if_match ${cpu cpu1} < 100}0${cpu cpu1}\ ${else}${cpu cpu1}\ ${endif}${endif}\ ${color7}2: ${color5}${if_match ${cpu cpu2} < 10}00${cpu cpu2}\ ${else}${if_match ${cpu cpu2} < 100}0${cpu cpu2}\ ${else}${cpu cpu2}\ ${endif}${endif}\ ${color7}3: ${color5}${if_match ${cpu cpu3} < 10}00${cpu cpu3}\ ${else}${if_match ${cpu cpu3} < 100}0${cpu cpu3}\ ${else}${cpu cpu3}\ ${endif}${endif}\ ${color7}Avg: ${color5}${if_match ${cpu cpu0} < 10}00${cpu cpu0}\ ${else}${if_match ${cpu cpu0} < 100}0${cpu cpu0}\ ${else}${cpu cpu0}\ ${endif}${endif} ${color3}RAM: ${color5}${mem} ${color}/ ${color5}${memmax}${alignr 5}${color3}Swap: ${color5}${swap} ${color}/ ${color5}${swapmax} ${color3}SDA: ${color7}Read: ${color5}${diskio_read /dev/sda}${goto 160}${color7}Write: ${color5}${diskio_write /dev/sda} ${alignc}${color3}Network speeds for eth0 ${color7}Down:${goto 60}${color5}${downspeedf eth0}${goto 125}${color7}Up:${goto 160}${color5}${upspeedf eth0} ${lua get_mounted_data 3} ${color6}FSYS${color} = ${lua mount 1 total}${goto 70}${color8}SIZE${goto 110}${color7}FREE${goto 150}${color1}USED${goto 185}${color}MOUNT ${color6}${lua mount 1 fsys 9}${goto 70}${color8}${lua mount 1 size}${goto 110}${color7}${lua mount 1 free}${goto 150}${color1}${lua mount 1 use%}${goto 185}${color}${lua mount 1 mount} ${color6}${lua mount 2 fsys 9}${goto 70}${color8}${lua mount 2 size}${goto 110}${color7}${lua mount 2 free}${goto 150}${color1}${lua mount 2 use%}${goto 185}${color}${lua mount 2 mount} ${color6}${lua mount 3 fsys 9}${goto 70}${color8}${lua mount 3 size}${goto 110}${color7}${lua mount 3 free}${goto 150}${color1}${lua mount 3 use%}${goto 185}${color}${lua mount 3 mount} ${color6}${lua mount 4 fsys 9}${goto 70}${color8}${lua mount 4 size}${goto 110}${color7}${lua mount 4 free}${goto 150}${color1}${lua mount 4 use%}${goto 185}${color}${lua mount 4 mount} ${color6}${lua mount 5 fsys 9}${goto 70}${color8}${lua mount 5 size}${goto 110}${color7}${lua mount 5 free}${goto 150}${color1}${lua mount 5 use%}${goto 185}${color}${lua mount 5 mount} ${color6}${lua mount 6 fsys 9}${goto 70}${color8}${lua mount 6 size}${goto 110}${color7}${lua mount 6 free}${goto 150}${color1}${lua mount 6 use%}${goto 185}${color}${lua mount 6 mount} ${color6}${lua mount 7 fsys 9}${goto 70}${color8}${lua mount 7 size}${goto 110}${color7}${lua mount 7 free}${goto 150}${color1}${lua mount 7 use%}${goto 185}${color}${lua mount 7 mount} ${color6}${lua mount 8 fsys 9}${goto 70}${color8}${lua mount 8 size}${goto 110}${color7}${lua mount 8 free}${goto 150}${color1}${lua mount 8 use%}${goto 185}${color}${lua mount 8 mount}
First Cup of Ubuntu
Thanks a lot Sector11, your solution exactly meets my needs.
The only concern is whether obtaining the amount of the free space by repeatedly invoking and parsing the "df" command (if I've correctly understood the script) could lead to a load for the CPU significantly higher than the usual "${fs_free }" conky method.
Skinny Soy Caramel Ubuntu
That conky running alone uses from 0 to 1% of my CPU.
Adv Reply
Bookmarks