Page 2100 of 2292 FirstFirst ... 1100160020002050209020982099210021012102211021502200 ... LastLast
Results 20,991 to 21,000 of 22919

Thread: Post your .conkyrc files w/ screenshots

  1. #20991
    Join Date
    Feb 2010
    Location
    SR11 Cockpit
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Jedcurtis View Post
    OK, hold off on your help! I just found the python script and am thinking I can solve on my own. (maybe) If not I'll PM you tomorrow sometime...

    I FIGURED IT OUT!!!!!!!!!! Woot woot!!!! I'm getting there slowly but surely. Once I figured out that I already had conkyEmail installed (courtesy of conky-companions I think) the rest was fairly strait-forward!!!

    Thanks
    Kinda figured you would. It very straight forward. and
    conkyEmail -h
    is your friend.

  2. #20992
    Join Date
    Jan 2012
    Beans
    1

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Sector11 View Post
    McLovin926 borrowed mine, I borrowed his, and edited it again ... NEXT!

    conkyForecast is a live and well, don't let anyone tell you different
    Next, hmmm, I guessthat means it's my turn, ok, once again, altered the clock, moved the wind info inside the clock, ad added the minute numbers.
    Other than that, still more or less the same

    Here is the altered Chronograph.lua with the minutes in it,
    Code:
    --[[ multiple analogue clocks by mrpeachy - 18 Jun 2012
     21 Jun 2012 - Chronograph modifications by Sector11
     22 Jun 2012 - again with mrpeachy's help day names, numbers and month names
     02 Nov 2012 - edited by McLovin to add the outside rings, and minute numbers
    use in conkyrc
    
    lua_load /path/Chronograph.lua
    lua_draw_hook_pre main
    TEXT
    
    
    -- INDEX (use find with):
    
    -- ###### 12 OR 24 CLOCK FACE
    -- SET BORDER OPTIONS ######  ALL CLOCKS
    
    -- ### START CLOCK A ######################################
    -- MARKS AROUND CLOCK A -- Large Main 24 HR Clock
    -- CLOCK A HOUR HAND
    -- CLOCK A MINUTE HAND SETUP
    -- CLOCK A SECOND HAND SETUP
    -- CLOCK A ###### 24 HR TIME
    
    -- ### START DIAL B ### Top - Week Day Names Dial #########
    -- ### START DIAL C ### Right - Month Names Dial ##########
    -- ### START DIAL D ### Left - Day Numbers Dial ###########
    
    -- ### START CLOCK E ######################################
    -- MARKS AROUND CLOCK E -- Bottom - 12 HR Clock
    -- CLOCK E HOUR HAND
    -- CLOCK E MINUTE HAND SETUP
    -- CLOCK E SECOND HAND SETUP
    -- CLOCK E ###### 12 HR TIME
    
    NOTE:  Putting ### CLOCK A ### last insures that it's functions are written
           over the other dials.
    ]]
    
    require 'cairo'
    
    function conky_main()
    if conky_window == nil then return end
    local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
    cr = cairo_create(cs)
    -- ########################################################
    -- SETTINGS AREA
    -- local cpu=conky_parse("${cpu}")
    -- local red-1=conky_parse("${image ~/Conky/images/red_1.png -p 0,0 -s 35x35}")
    
    -- ###### 12 OR 24 CLOCK FACE #############################
    local clock_type_A=12 -- Large Main 24 HR Clock
    local clock_type_E=12 -- Bottom - 12 HR Clock
    
    -- ###### CLOCK SETTINGS ##################################
    -- SET BORDER OPTIONS FOR "CLOCKS" ########################
    local clock_border_width=0
    -- set color and alpha for clock border
    local cbr,cbg,cbb,cba=1,1,1,1  -- full opaque white
    -- gap from clock border to minute marks
    local b_to_m=1
    
    -- ########################################################
    -- ### START DIAL B ### Top - Week Day Names Dial #########
    -- DIAL POSITION FOR TEXT
    local center_x=175
    local center_y=95
    local radius=50
    -- FONT
    cairo_select_font_face (cr, "Santana", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
    cairo_set_font_size (cr, 12)
    cairo_set_source_rgba (cr,1,1,1,1) --(cr,194/255,204/255,255/255,1)    -- (cr,1,1,1,1)
    -- TABLE OF TEXT -- in order
    text_days={"SUN","MON","TUE","WED","THR","FRI","SAT",}
    -- text_days={"DOM","LUN","MAR","MIE","JUE","VIE","SAB",}
    for i=1,7 do
    -- work out points
    local point=(math.pi/180)*((360/7)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    local extents=cairo_text_extents_t:create()
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
    end
    -- INNER POINTS POSITION, radius smaller than text circle
    local radius=35
    for i=1,7 do
    local point=(math.pi/180)*((360/7)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
    end
    -- DRAW HAND -- snaps to current day of week
    local hand_length=30
    local day_number=tonumber(os.date("%w"))
    local point=(math.pi/180)*((360/7)*(day_number))
    local x=0+hand_length*(math.sin(point))
    local y=0-hand_length*(math.cos(point))
    local hand_width=2
    cairo_move_to (cr,center_x,center_y)
    cairo_line_to (cr,center_x+x,center_y+y)
    cairo_stroke (cr)
    -- ### END DIAL B #########################################
    
    -- ########################################################
    -- ### START DIAL C ### Right - Month Names Dial ##########
    -- DIAL POSITION FOR TEXT
    local center_x=260
    local center_y=175
    local radius=45
    -- FONT
    cairo_select_font_face (cr, "Santana", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
    cairo_set_font_size (cr, 12)
    cairo_set_source_rgba (cr,1,1,1,1) --(cr,194/255,204/255,255/255,1)    -- (cr,1,1,1,1)
    -- TABLE OF TEXT -- in order
    text_days={"JAN","FEB","MAR","APR","MAY","JUN","JUL","AUG","SEP","OCT","NOV","DEC",}
    -- text_days={"ENE","FEB","MAR","ABR","MAY","JUN","JUL","AGO","SEP","OCT","NOV","DIC",}
    for i=1,12 do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    local extents=cairo_text_extents_t:create()
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
    end
    -- INNER POINTS POSITION, radius smaller than text circle
    local radius=32
    for i=1,12 do
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
    end
    -- DRAW HAND -- snaps to current month
    local this_month=tonumber(os.date("%m"))
    local hand_length=28 --radius for this calculation
    local point=(math.pi/180)*((360/12)*(this_month-1))
    local x=0+hand_length*(math.sin(point))
    local y=0-hand_length*(math.cos(point))
    cairo_move_to (cr,center_x,center_y)
    cairo_line_to (cr,center_x+x,center_y+y)
    cairo_stroke (cr)
    
    -- ### END CLOCK C ########################################
    
    -- ########################################################
    -- ### START DIAL D ### Left - Day Numbers Dial ###########
    -- GET NUMBER OF DAYS IN CURRENT MONTH
    -- calculate Feb, then set up table
    year4num=os.date("%Y")
    t1=os.time({year=year4num,month=03,day=01,hour=00,min=0,sec=0});
    t2=os.time({year=year4num,month=02,day=01,hour=00,min=0,sec=0});
    febdaynum=tonumber((os.difftime(t1,t2))/(24*60*60))
    -- MONTH TABLE
    monthdays={31,febdaynum,31,30,31,30,31,31,30,31,30,31}
    this_month=tonumber(os.date("%m"))
    number_days=monthdays[this_month]
    -- TEXT positioning
    local center_x=95
    local center_y=175
    local radius=50
    cairo_select_font_face (cr, "Santana", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
    cairo_set_font_size (cr, 8)
    cairo_set_source_rgba (cr,1,1,1,1) --(cr,194/255,204/255,255/255,1)    -- (cr,1,1,1,1)
    for i=1,number_days do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/number_days)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=i
    local extents=cairo_text_extents_t:create()
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
    end
    -- INNER POINTS POSITION, radius smaller than text circle
    local radius=40
    for i=1,number_days do
    local point=(math.pi/180)*((360/number_days)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
    end
    -- DRAW HAND -- snaps to current DAY
    local this_day=tonumber(os.date("%d"))
    local hand_length=35--radius for this calculation
    local point=(math.pi/180)*((360/number_days)*(this_day-1))
    local x=0+hand_length*(math.sin(point))
    local y=0-hand_length*(math.cos(point))
    cairo_move_to (cr,center_x,center_y)
    cairo_line_to (cr,center_x+x,center_y+y)
    cairo_stroke (cr)
    -- ### END CLOCK D ########################################
    
    -- ########################################################
    -- ### START CLOCK E ######################################
    -- MARKS AROUND CLOCK E -- Bottom - 12 HR Clock
    local number_marks_E=12
    -- set mark length
    local m_length_E=0
    -- set mark width
    local m_width_E=0
    -- set mark line cap type
    local m_cap=CAIRO_LINE_CAP_ROUND
    -- set mark color and alpha,red blue green alpha
    local mr,mg,mb,ma=1,1,0,1-- opaque white
    -- SETUP HOUR HANDS #######################################
    -- CLOCK E HOUR HAND
    -- set length of hour hand
    hh_length_E=25
    -- set hour hand width
    hh_width_E=2
    -- set hour hand line cap
    hh_cap=CAIRO_LINE_CAP_ROUND
    -- set hour hand color
    hhr,hhg,hhb,hha=1,1,0,1-- fully opaque white
    -- SETUP MINUTE HANDS #####################################
    -- CLOCK E MINUTE HAND SETUP
    -- set length of minute hand
    mh_length_E=35
    -- set minute hand width
    mh_width_E=2
    -- set minute hand line cap
    mh_cap=CAIRO_LINE_CAP_ROUND
    -- set minute hand color
    mhr,mhg,mhb,mha=1,1,0,1-- fully opaque white
    -- SETUP SECOND HANDS #####################################
    -- CLOCK E SECOND HAND SETUP
    -- set length of seconds hand
    sh_length_E=32
    -- set hour hand width
    sh_width_E=1
    -- set hour hand line cap
    sh_cap=CAIRO_LINE_CAP_ROUND
    -- set seconds hand color
    shr,shg,shb,sha=1,0,0,1-- fully opaque red
    -- CLOCK E ###### 12 HR TIME ##############################
    -- CLOCK SETTINGS
    clock_radius=45
    clock_centerx=175
    clock_centery=260
    -- DRAWING CODE
    -- DRAW BORDER
    cairo_set_source_rgba (cr,cbr,cbg,cbb,cba)
    cairo_set_line_width (cr,clock_border_width)
    cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
    cairo_stroke (cr)
    -- DRAW MARKS
    -- stuff that can be moved outside of the loop, needs only be set once
    -- calculate end and start radius for marks
    m_end_rad=clock_radius-b_to_m
    m_start_rad=m_end_rad-m_length_E
    -- set line cap type
    cairo_set_line_cap  (cr, m_cap)
    -- set line width
    cairo_set_line_width (cr,m_width_E)
    -- set color and alpha for marks
    cairo_set_source_rgba (cr,mr,mg,mb,ma)
    -- START LOOP FOR SECOND MARKS
    for i=1,number_marks_E do
    -- drawing code using the value of i to calculate degrees
    -- calculate start point for 12/24 hour mark
    radius=m_start_rad
    point=(math.pi/180)*((i-1)*(360/number_marks_E))
    x=0+radius*(math.sin(point))
    y=0-radius*(math.cos(point))
    -- set start point for line
    cairo_move_to (cr,clock_centerx+x,clock_centery+y)
    -- calculate end point for 12/24 hour mark
    radius=m_end_rad
    point=(math.pi/180)*((i-1)*(360/number_marks_E))
    x=0+radius*(math.sin(point))
    y=0-radius*(math.cos(point))
    -- set path for line
    cairo_line_to (cr,clock_centerx+x,clock_centery+y)
    -- draw the line
    cairo_stroke (cr)
    end-- of for loop
    --[[ TIME CALCULATIONS CLOCK E
    if clock_type_E==12 then
    hours=tonumber(os.date("%I"))
    -- convert hours to seconds
    h_to_s=hours*60*60
    elseif clock_type_E==24 then
    hours=tonumber(os.date("%H"))
    -- convert hours to seconds
    h_to_s=hours*60*60
    end
    minutes=tonumber(os.date("%M"))
    -- convert minutes to seconds
    m_to_s=minutes*60
    -- get current seconds
    seconds=tonumber(os.date("%S"))
    -- DRAW HOUR HAND
    -- get hours minutes seconds as just seconds and draw it
    hsecs=h_to_s+m_to_s+seconds
    -- calculate degrees for each second
    hsec_degs=hsecs*(360/(60*60*clock_type_E))-- use equation ~ eliminate decimals
    -- set radius to calculate hand points
    radius=hh_length_E
    -- set start line coordinates, the center of the circle
    cairo_move_to (cr,clock_centerx,clock_centery)
    -- calculate coordinates for end of minute hand
    point=(math.pi/180)*hsec_degs
    x=0+radius*(math.sin(point))
    y=0-radius*(math.cos(point))
    -- describe the line we will draw
    cairo_line_to (cr,clock_centerx+x,clock_centery+y)
    -- set up line attributes and draw line
    cairo_set_line_width (cr,hh_width_E)
    cairo_set_source_rgba (cr,hhr,hhg,hhb,hha)
    cairo_set_line_cap  (cr, hh_cap)
    cairo_stroke (cr)
    -- DRAW MINUTE HAND
    -- get minutes and seconds as seconds
    msecs=m_to_s+seconds
    -- calculate degrees for each second
    msec_degs=msecs*0.1
    -- set radius to calculate hand points
    radius=mh_length_E
    -- set start line coordinates, the center of the circle
    cairo_move_to (cr,clock_centerx,clock_centery)
    -- calculate coordinates for end of minute hand
    point=(math.pi/180)*msec_degs
    x=0+radius*(math.sin(point))
    y=0-radius*(math.cos(point))
    -- describe the line we will draw
    cairo_line_to (cr,clock_centerx+x,clock_centery+y)
    -- set up line attributes and draw line
    cairo_set_line_width (cr,mh_width_E)
    cairo_set_source_rgba (cr,mhr,mhg,mhb,mha)
    cairo_set_line_cap  (cr, mh_cap)
    cairo_stroke (cr)
    -- DRAW SECOND HAND
    -- calculate degrees for each second
    sec_degs=seconds*6
    -- set radius to calculate hand points
    radius=sh_length_E
    -- set start line coordinates, the center of the circle
    cairo_move_to (cr,clock_centerx,clock_centery)
    -- calculate coordinates for end of seconds hand
    point=(math.pi/180)*sec_degs
    x=0+radius*(math.sin(point))
    y=0-radius*(math.cos(point))
    -- describe the line we will draw
    cairo_line_to (cr,clock_centerx+x,clock_centery+y)
    -- set up line attributes
    cairo_set_line_width (cr,sh_width_E)
    cairo_set_source_rgba (cr,shr,shg,shb,sha)
    cairo_set_line_cap  (cr, sh_cap)
    cairo_stroke (cr)
    
    
    -- POSITION FOR TEXT HOUR NUMBERS
    local center_x=175
    local center_y=260
    local radius=45
    -- FONT
    cairo_select_font_face (cr, "Santana", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
    cairo_set_font_size (cr, 12)
    cairo_set_source_rgba (cr,194/255,204/255,255/255,1)    -- (cr,1,1,1,1)
    -- TABLE OF TEXT -- in order
    --text_days={"12","01","02","03","04","05","06","07","08","09","10","11",}
    -- FOR A 12 HOUR CLOCK WITH THE NUMBERS 13-00
    text_days={"00","13","14","15","16","17","18","19","20","21","22","23",}
    for i=1,12 do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    local extents=cairo_text_extents_t:create()
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
    end
    -- INNER POINTS POSITION, radius smaller than text circle
    local radius=32
    for i=1,12 do
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
    end ]]
    
    -- ### END CLOCK E ########################################
    
    
    
    
    -- ########################################################
    -- ### START CLOCK A ######################################
    -- SET MARKS ##############################################
    -- MARKS AROUND CLOCK A -- Large Main 24 HR Clock
    local number_marks_A=12
    -- set mark length
    local m_length_A=0
    -- set mark width
    local m_width_A=0
    -- set mark line cap type
    local m_cap=CAIRO_LINE_CAP_ROUND
    -- set mark color and alpha,red blue green alpha
    local mr,mg,mb,ma=1,1,1,1-- opaque white
    -- SETUP HOUR HANDS #######################################
    -- CLOCK A HOUR HAND
    -- set length of hour hand
    hh_length_A=130
    -- set hour hand width
    hh_width_A=3
    -- set hour hand line cap
    hh_cap=CAIRO_LINE_CAP_ROUND
    -- set hour hand color
    hhr,hhg,hhb,hha=1,1,1,.5-- fully opaque white
    -- SETUP MINUTE HANDS #####################################
    -- CLOCK A MINUTE HAND SETUP
    -- set length of minute hand
    mh_length_A=145
    -- set minute hand width
    mh_width_A=2
    -- set minute hand line cap
    mh_cap=CAIRO_LINE_CAP_ROUND
    -- set minute hand color
    mhr,mhg,mhb,mha=1,1,1,.5-- fully opaque white
    -- SETUP SECOND HANDS #####################################
    -- CLOCK A SECOND HAND SETUP
    -- set length of seconds hand
    sh_length_A=150
    -- set hour hand width
    sh_width_A=2
    -- set hour hand line cap
    sh_cap=CAIRO_LINE_CAP_ROUND
    -- set seconds hand color
    shr,shg,shb,sha=1,0,0,1-- fully opaque red
    -- CLOCK A ###### 12 HR TIME ##############################
    -- CLOCK SETTINGS
    clock_radius=200
    clock_centerx=175
    clock_centery=175
    -- DRAWING CODE
    -- DRAW BORDER
    cairo_set_source_rgba (cr,cbr,cbg,cbb,cba)
    cairo_set_line_width (cr,clock_border_width)
    cairo_arc (cr,clock_centerx,clock_centery,clock_radius,0,2*math.pi)
    cairo_stroke (cr)
    -- DRAW MARKS
    -- stuff that can be moved outside of the loop, needs only be set once
    -- calculate end and start radius for marks
    m_end_rad=clock_radius-b_to_m
    m_start_rad=m_end_rad-m_length_A
    -- set line cap type
    cairo_set_line_cap  (cr, m_cap)
    -- set line width
    cairo_set_line_width (cr,m_width_A)
    -- set color and alpha for marks
    cairo_set_source_rgba (cr,mr,mg,mb,ma)
    -- START LOOP FOR HOUR MARKS
    for i=1,number_marks_A do
    -- drawing code using the value of i to calculate degrees
    -- calculate start point for 12/24 hour mark
    radius=m_start_rad
    point=(math.pi/180)*((i-1)*(360/number_marks_A))
    x=0+radius*(math.sin(point))
    y=0-radius*(math.cos(point))
    -- set start point for line
    cairo_move_to (cr,clock_centerx+x,clock_centery+y)
    -- calculate end point for 12/24 hour mark
    radius=m_end_rad
    point=(math.pi/180)*((i-1)*(360/number_marks_A))
    x=0+radius*(math.sin(point))
    y=0-radius*(math.cos(point))
    -- set path for line
    cairo_line_to (cr,clock_centerx+x,clock_centery+y)
    -- draw the line
    cairo_stroke (cr)
    end-- of for loop
    -- HOUR MARKS
    -- TIME CALCULATIONS CLOCK A
    if clock_type_A==12 then
    hours=tonumber(os.date("%I"))
    -- convert hours to seconds
    h_to_s=hours*60*60
    elseif clock_type_A==24 then
    hours=tonumber(os.date("%H"))
    -- convert hours to seconds
    h_to_s=hours*60*60
    end
    minutes=tonumber(os.date("%M"))
    -- convert minutes to seconds
    m_to_s=minutes*60
    -- get current seconds
    seconds=tonumber(os.date("%S"))
    -- DRAW HOUR HAND
    -- get hours minutes seconds as just seconds
    hsecs=h_to_s+m_to_s+seconds
    -- calculate degrees for each second
    hsec_degs=hsecs*(360/(60*60*clock_type_A))-- use equation ~ eliminate decimals
    -- set radius to calculate hand points
    radius=hh_length_A
    -- set start line coordinates, the center of the circle
    cairo_move_to (cr,clock_centerx,clock_centery)
    -- calculate coordinates for end of hour hand
    point=(math.pi/180)*hsec_degs
    x=0+radius*(math.sin(point))
    y=0-radius*(math.cos(point))
    -- describe the line we will draw
    cairo_line_to (cr,clock_centerx+x,clock_centery+y)
    -- set up line attributes and draw line
    cairo_set_line_width (cr,hh_width_A)
    cairo_set_source_rgba (cr,hhr,hhg,hhb,hha)
    cairo_set_line_cap  (cr, hh_cap)
    cairo_stroke (cr)
    -- DRAW MINUTE HAND
    -- get minutes and seconds just as seconds
    msecs=m_to_s+seconds
    -- calculate degrees for each second
    msec_degs=msecs*0.1
    -- set radius to calculate hand points
    radius=mh_length_A
    -- set start line coordinates, the center of the circle
    cairo_move_to (cr,clock_centerx,clock_centery)
    -- calculate coordinates for end of minute hand
    point=(math.pi/180)*msec_degs
    x=0+radius*(math.sin(point))
    y=0-radius*(math.cos(point))
    -- describe the line we will draw
    cairo_line_to (cr,clock_centerx+x,clock_centery+y)
    -- set up line attributes and draw line
    cairo_set_line_width (cr,mh_width_A)
    cairo_set_source_rgba (cr,mhr,mhg,mhb,mha)
    cairo_set_line_cap  (cr, mh_cap)
    cairo_stroke (cr)
    -- DRAW SECOND HAND
    --[[
    -- calculate degrees for each second
    sec_degs=seconds*6
    -- set radius to calculate hand points
    radius=sh_length_A
    -- set start line coordinates, the center of the circle
    cairo_move_to (cr,clock_centerx,clock_centery)
    -- calculate coordinates for end of seconds hand
    point=(math.pi/180)*sec_degs
    x=0+radius*(math.sin(point))
    y=0-radius*(math.cos(point))
    -- describe the line we will draw
    cairo_line_to (cr,clock_centerx+x,clock_centery+y)
    -- set up line attributes
    cairo_set_line_width (cr,sh_width_A)
    cairo_set_source_rgba (cr,shr,shg,shb,sha)
    cairo_set_line_cap  (cr, sh_cap)
    cairo_stroke (cr)
    ]]
    -- ####################################################################
    -- part of a second hand
    
    --position
    local center_x=175
    local center_y=175
    --get seconds value
    local seconds=tonumber(os.date("%S"))
    --calculate rotation of second hand in degrees
    local arc=(math.pi/180)*((360/60)*seconds)
    --calculate point 1
    local radius1=100
    local x1=0+radius1*math.sin(arc)
    local y1=0-radius1*math.cos(arc)
    --calculate point 2
    local radius2=151
    local x2=0+radius2*math.sin(arc)
    local y2=0-radius2*math.cos(arc)
    --draw line connecting points
    cairo_move_to (cr, center_x+x1,center_y+y1)
    cairo_line_to (cr, center_x+x2, center_y+y2)
    cairo_set_source_rgba (cr,255/255,0/255,0/255,1)
    cairo_stroke (cr)
    -- ####################################################################
    
    -- POSITION FOR TEXT HOUR NUMBERS
    local center_x=175
    local center_y=175
    local radius=165
    -- FONT
    cairo_select_font_face (cr, "Santana", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_BOLD);
    cairo_set_font_size (cr, 16)
    cairo_set_source_rgba (cr,1,1,1,1) --(cr,194/255,204/255,255/255,1)    -- (cr,1,1,1,1)
    -- TABLE OF TEXT -- in order
    text_days={"12","01","02","03","04","05","06","07","08","09","10","11","12","13","14","15","16","17","18","19","20","21","22","23",}
    for i=1,12 do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    local extents=cairo_text_extents_t:create()
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
    end
    
    -- POSITION FOR TEXT HOUR NUMBERS
    local center_x=175
    local center_y=175
    local radius=160
    -- FONT
    cairo_select_font_face (cr, "Santana", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
    cairo_set_font_size (cr, 12)
    cairo_set_source_rgba (cr,1,1,1,1) --(cr,194/255,204/255,255/255,1)    -- (cr,1,1,1,1)
    -- TABLE OF TEXT -- in order
    text_days={"","1","2","3","4","","6","7","8","9","","11","12","13","14","","16","17","18","19","","21","22","23","24","","26","27","28","29","","31","32","33","34","","36","37","38","39","","41","42","43","44","","46","47","48","49","","51","52","53","54","","56","57","58","59","",}
    for i=1,60 do
    -- OUTTER POINTS POSTION FOR TEXT
    local point=(math.pi/180)*((360/60)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    -- CALCULATE CENTRE OF TEXT
    local text=text_days[i]--gets text from table
    local extents=cairo_text_extents_t:create()
    cairo_text_extents(cr,text,extents)
    local width=extents.width
    local height=extents.height
    cairo_move_to(cr,center_x+x-(width/2),center_y+y+(height/2))
    cairo_show_text (cr, text)
    cairo_stroke (cr)
    end
    
    -- INNER POINTS POSITION, radius smaller than text circle
    local radius=150
    for i=1,60 do
    local point=(math.pi/180)*((360/60)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,1,0,2*math.pi)
    cairo_stroke (cr)
    end
    --[[ HOUR POINTS CIRCLES,  ##########Uncoment section to draw rings around numbers
    local radius=162
    for i=1,60 do
    local point=(math.pi/180)*((360/12)*(i-1))
    local x=0+radius*(math.sin(point))
    local y=0-radius*(math.cos(point))
    cairo_arc (cr,center_x+x,center_y+y,12,0,2*math.pi)
    cairo_stroke (cr)
    end]]
    -- ### END CLOCK A ########################################
    
    
    
    -- ########################################################
    cairo_destroy(cr)
    cairo_surface_destroy(cs)
    cr=nil
    end-- end main function
    Ok, Sector11, your turn........... NEXT teehee
    /me waits eating popcorn for the show,
    Last edited by McLovin926; November 4th, 2012 at 10:51 PM.

  3. #20993
    Join Date
    Jul 2006
    Location
    Gujranwala, Pakistan
    Beans
    139
    Distro
    Ubuntu

    Re: Post your .conkyrc files w/ screenshots

    I'm trying to show smb shares stats in conky. Shares mounted through nautilus are located under ~.gvfs/ but they don't show up in conky...?

    Code:
    #${if_mounted /home/saad/.gvfs/share-on-server}Toshiba: ${fs_free /home/saad/.gvfs/share-on-server}/${fs_size /home/saad/.gvfs/share-on-server} ${fs_bar 6 /home/saad/.gvfs/share-on-server}${endif}
    Do I have to mount them in fstab for them to show in conky?

  4. #20994
    Join Date
    Feb 2010
    Location
    SR11 Cockpit
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by sbjaved View Post
    I'm trying to show smb shares stats in conky. Shares mounted through nautilus are located under ~.gvfs/ but they don't show up in conky...?

    Code:
    #${if_mounted /home/saad/.gvfs/share-on-server}Toshiba: ${fs_free /home/saad/.gvfs/share-on-server}/${fs_size /home/saad/.gvfs/share-on-server} ${fs_bar 6 /home/saad/.gvfs/share-on-server}${endif}
    Do I have to mount them in fstab for them to show in conky?
    It's old but maybe still good:

    HOWTO: Automatically mount and unmount shares (alternative version)
    Read it all pages 3 & 4 are current.

  5. #20995
    Join Date
    Oct 2010
    Location
    Whitney Point, NY
    Beans
    92

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by mrpeachy View Post
    you could try replacing the settings you have now with this set of minimal settings on each conky
    adjust size and gaps and see if the conkies behave

    Code:
    ##minimal conky settings
    background no
    use_xft yes
    total_run_times 0
    own_window yes
    own_window_transparent yes
    own_window_type normal
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    double_buffer yes
    no_buffers yes
    uppercase no
    cpu_avg_samples 2
    update_interval 1
    
    alignment top_right
    minimum_size 600 400
    maximum_width 600
    gap_x 10
    gap_y 0
    Tried this on both conkys and they don't act any different, although it does clean the text files up making them easier to read lol. My hardware monitor still starts up on the right monitor, although on the left of that monitor, when alignment is set to top_left. I don't understand it because the weather conky also is set alignment top_left and does start on the left monitor.
    Still also not starting on their own, have to start them with terminal and I still get segmentation faults unless I wait a while before starting them.

  6. #20996
    Join Date
    Jul 2006
    Location
    Gujranwala, Pakistan
    Beans
    139
    Distro
    Ubuntu

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Sector11 View Post
    It's old but maybe still good:

    HOWTO: Automatically mount and unmount shares (alternative version)
    Read it all pages 3 & 4 are current.
    The script was pretty old and people seemed to have issues with it in newer ubuntu releases. One of the commentators suggested 'smbnetfs'. Its a good option. Tried it. Works as advertised but transfer speeds are slow (2MBps for smbnetfs VS 6MBps for gvfs in my wifi network). So I think I'll stick to gvfs for now. gvfs shares are browesable like regular folders...conky should work with them. I'm able to run 'ls' and other commands on them.

  7. #20997
    Join Date
    Aug 2010
    Location
    Detachment 7
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Some 'borrowing' of my own, cough-cough! A little bit of McLovin, a little bit of Sector11, throw in some v9000, tweak some templates, add some colours, change some fonts, (check my email) and voilŕ! And, @Sector11, I do like having the current condition icon, as well as the current moon phase. I just think it looks cool... I did get rid of the H/L from the time as it is showing right below in the v9000! The template is one Sector11 posted a while back, that for the life of me, I can't find. (the post that is) (if it helps, the template is called h-10d-template.lua) I assume that meant horizontal 10 day forecast! Thanks for all your hard work everyone! Cut and Paste is still alive and well!!!
    Attached Images Attached Images
    | [I]Running 'VSIDO' | My blog |

  8. #20998
    Join Date
    Jun 2012
    Beans
    0

    Re: Post your .conkyrc files w/ screenshots

    Hi !
    Your conky looks nice; I tried the code and take the Chronograph.lua code but i've some errors...
    May be i need the red_one image file ?
    Code:
     conky -c /home/climatix/développement/12-1-Sector11-1/LUA/ConkyChrono
    Conky: /home/climatix/développement/12-1-Sector11-1/LUA/ConkyChrono: 1: no such configuration: '--[['
    Conky: /home/climatix/développement/12-1-Sector11-1/LUA/ConkyChrono: 2: no such configuration: '21'
    Conky: /home/climatix/développement/12-1-Sector11-1/LUA/ConkyChrono: 3: no such configuration: '22'
    Conky: /home/climatix/développement/12-1-Sector11-1/LUA/ConkyChrono: 4: no such configuration: '02'
    Conky: /home/climatix/développement/12-1-Sector11-1/LUA/ConkyChrono: 5: no such configuration: 'use'
    Conky: desktop window (ae) is root window
    Conky: drawing to desktop window
    Conky: drawing to single buffer
    Conky: Unable to load image '/home/climatix/Conky/images/red_1.png'
    Thanks

  9. #20999
    Join Date
    Jun 2012
    Beans
    0

    Re: Post your .conkyrc files w/ screenshots

    @Sector11
    Is it possible to change the language in the chronograph.lua to French?You told about English and Spanish can we chage it as we want with no modify the entire script ?
    Thanks
    Have a nice day

    Sorry for that I've found the solution...I can't remove this post ?
    Last edited by ragamatrix; November 5th, 2012 at 01:50 PM. Reason: find the soluce

  10. #21000
    Join Date
    Jun 2012
    Beans
    0

    Re: Post your .conkyrc files w/ screenshots

    @Sector 11
    I'd like to have minutes around the circle to have a normal clock like "McLovin926"But I can't make it works, things probably missing...?The seconds are marked with a "point" and not a "hand"
    thanks
    show:http://pix.toile-libre.org/?img=1352130046.png
    Last edited by ragamatrix; November 5th, 2012 at 04:50 PM.

Page 2100 of 2292 FirstFirst ... 1100160020002050209020982099210021012102211021502200 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •