Page 1237 of 2325 FirstFirst ... 2377371137118712271235123612371238123912471287133717372237 ... LastLast
Results 12,361 to 12,370 of 23241

Thread: Post your .conkyrc files w/ screenshots

  1. #12361
    Join Date
    Dec 2008
    Location
    The Desert
    Beans
    281
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Endomancer View Post
    Code:
    endomancer@endomancer-desktop:~$ sensors
    No sensors found!
    Make sure you loaded all the kernel drivers you need.
    Try sensors-detect to find out which these are.
    endomancer@endomancer-desktop:~$ sensors-detect
    You need to be root to run this script.
    endomancer@endomancer-desktop:~$ sudo sensors-detect
    [sudo] password for endomancer: 
    # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
    # Board: Gigabyte Technology Co., Ltd. GA-8S661FXM-775
    
    This program will help you determine which kernel modules you need
    to load to use lm_sensors most effectively. It is generally safe
    and recommended to accept the default answers to all questions,
    unless you know what you're doing.
    
    Some south bridges, CPUs or memory controllers contain embedded sensors.
    Do you want to scan for them? This is totally safe. (YES/no): y
    Silicon Integrated Systems SIS5595...                       No
    VIA VT82C686 Integrated Sensors...                          No
    VIA VT8231 Integrated Sensors...                            No
    AMD K8 thermal sensors...                                   No
    AMD Family 10h thermal sensors...                           No
    AMD Family 11h thermal sensors...                           No
    Intel Core family thermal sensor...                         No
    Intel Atom thermal sensor...                                No
    Intel AMB FB-DIMM thermal sensor...                         No
    VIA C7 thermal sensor...                                    No
    VIA Nano thermal sensor...                                  No
    
    Some Super I/O chips contain embedded sensors. We have to write to
    standard I/O ports to probe them. This is usually safe.
    Do you want to scan for Super I/O sensors? (YES/no): y
    Probing for Super-I/O at 0x2e/0x2f
    Trying family `National Semiconductor'...                   No
    Trying family `SMSC'...                                     No
    Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
    Trying family `ITE'...                                      Yes
    Found `ITE IT8705F Super IO Sensors'                        Success!
        (address 0x290, driver `it87')
    Probing for Super-I/O at 0x4e/0x4f
    Trying family `National Semiconductor'...                   No
    Trying family `SMSC'...                                     No
    Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
    Trying family `ITE'...                                      Yes
    Found `ITE IT8705F Super IO Sensors'                        Success!
        (address 0x290, driver `it87')
    
    Some systems (mainly servers) implement IPMI, a set of common interfaces
    through which system health data may be retrieved, amongst other things.
    We first try to get the information from SMBIOS. If we don't find it
    there, we have to read from arbitrary I/O ports to probe for such
    interfaces. This is normally safe. Do you want to scan for IPMI
    interfaces? (YES/no): y
    Probing for `IPMI BMC KCS' at 0xca0...                      No
    Probing for `IPMI BMC SMIC' at 0xca8...                     No
    
    Some hardware monitoring chips are accessible through the ISA I/O ports.
    We have to write to arbitrary I/O ports to probe them. This is usually
    safe though. Yes, you do have ISA I/O ports even if you do not have any
    ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): y
    Probing for `National Semiconductor LM78' at 0x290...       No
    Probing for `National Semiconductor LM79' at 0x290...       No
    Probing for `Winbond W83781D' at 0x290...                   No
    Probing for `Winbond W83782D' at 0x290...                   No
    
    Lastly, we can probe the I2C/SMBus adapters for connected hardware
    monitoring devices. This is the most risky part, and while it works
    reasonably well on most systems, it has been reported to cause trouble
    on some systems.
    Do you want to probe the I2C/SMBus adapters now? (YES/no): y
    Sorry, no supported PCI bus adapters found.
    Module i2c-dev loaded successfully.
    
    Next adapter: NVIDIA i2c adapter  (i2c-0)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: NVIDIA i2c adapter  (i2c-1)
    Do you want to scan it? (YES/no/selectively): y
    Client found at address 0x50
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 No
    Probing for `EDID EEPROM'...                                Yes
        (confidence 8, not a hardware monitoring chip)
    
    Next adapter: NVIDIA i2c adapter  (i2c-2)
    Do you want to scan it? (YES/no/selectively): y
    
    Now follows a summary of the probes I have just done.
    Just press ENTER to continue: 
    
    Driver `it87':
      * ISA bus, address 0x290
        Chip `ITE IT8705F Super IO Sensors' (confidence: 9)
    
    To load everything that is needed, add this to /etc/modules:
    #----cut here----
    # Chip drivers
    it87
    #----cut here----
    If you have some drivers built into your kernel, the list above will
    contain too many modules. Skip the appropriate ones!
    
    Do you want to add these lines automatically to /etc/modules? (yes/NO)y
    Successful!
    
    Monitoring programs won't work until the needed modules are
    loaded. You may want to run '/etc/init.d/module-init-tools start'
    to load them.
    
    Unloading i2c-dev... OK
    
    endomancer@endomancer-desktop:~$
    did you run sensors again in a terminal after that
    I'm a super power user

  2. #12362
    Join Date
    Dec 2009
    Location
    Central Coast. Australia
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: Post your .conkyrc files w/ screenshots

    I went through the whole procedure again plus re ran sensors at the end resulting in...

    Code:
    endomancer@endomancer-desktop:~$ acpi -t
    endomancer@endomancer-desktop:~$ sensors
    No sensors found!
    Make sure you loaded all the kernel drivers you need.
    Try sensors-detect to find out which these are.
    endomancer@endomancer-desktop:~$ sensors-detect
    You need to be root to run this script.
    endomancer@endomancer-desktop:~$ sudo sensors-detect
    # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
    # Board: Gigabyte Technology Co., Ltd. GA-8S661FXM-775
    
    This program will help you determine which kernel modules you need
    to load to use lm_sensors most effectively. It is generally safe
    and recommended to accept the default answers to all questions,
    unless you know what you're doing.
    
    Some south bridges, CPUs or memory controllers contain embedded sensors.
    Do you want to scan for them? This is totally safe. (YES/no): y
    Silicon Integrated Systems SIS5595...                       No
    VIA VT82C686 Integrated Sensors...                          No
    VIA VT8231 Integrated Sensors...                            No
    AMD K8 thermal sensors...                                   No
    AMD Family 10h thermal sensors...                           No
    AMD Family 11h thermal sensors...                           No
    Intel Core family thermal sensor...                         No
    Intel Atom thermal sensor...                                No
    Intel AMB FB-DIMM thermal sensor...                         No
    VIA C7 thermal sensor...                                    No
    VIA Nano thermal sensor...                                  No
    
    Some Super I/O chips contain embedded sensors. We have to write to
    standard I/O ports to probe them. This is usually safe.
    Do you want to scan for Super I/O sensors? (YES/no): y
    Probing for Super-I/O at 0x2e/0x2f
    Trying family `National Semiconductor'...                   No
    Trying family `SMSC'...                                     No
    Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
    Trying family `ITE'...                                      Yes
    Found `ITE IT8705F Super IO Sensors'                        Success!
        (address 0x290, driver `it87')
    Probing for Super-I/O at 0x4e/0x4f
    Trying family `National Semiconductor'...                   No
    Trying family `SMSC'...                                     No
    Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
    Trying family `ITE'...                                      Yes
    Found `ITE IT8705F Super IO Sensors'                        Success!
        (address 0x290, driver `it87')
    
    Some systems (mainly servers) implement IPMI, a set of common interfaces
    through which system health data may be retrieved, amongst other things.
    We first try to get the information from SMBIOS. If we don't find it
    there, we have to read from arbitrary I/O ports to probe for such
    interfaces. This is normally safe. Do you want to scan for IPMI
    interfaces? (YES/no): y
    Probing for `IPMI BMC KCS' at 0xca0...                      No
    Probing for `IPMI BMC SMIC' at 0xca8...                     No
    
    Some hardware monitoring chips are accessible through the ISA I/O ports.
    We have to write to arbitrary I/O ports to probe them. This is usually
    safe though. Yes, you do have ISA I/O ports even if you do not have any
    ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): n
    
    Lastly, we can probe the I2C/SMBus adapters for connected hardware
    monitoring devices. This is the most risky part, and while it works
    reasonably well on most systems, it has been reported to cause trouble
    on some systems.
    Do you want to probe the I2C/SMBus adapters now? (YES/no): y
    Sorry, no supported PCI bus adapters found.
    Module i2c-dev loaded successfully.
    
    Next adapter: NVIDIA i2c adapter  (i2c-0)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: NVIDIA i2c adapter  (i2c-1)
    Do you want to scan it? (YES/no/selectively): y
    Client found at address 0x50
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 No
    Probing for `EDID EEPROM'...                                Yes
        (confidence 8, not a hardware monitoring chip)
    
    Next adapter: NVIDIA i2c adapter  (i2c-2)
    Do you want to scan it? (YES/no/selectively): y
    
    Now follows a summary of the probes I have just done.
    Just press ENTER to continue: 
    
    Driver `it87':
      * ISA bus, address 0x290
        Chip `ITE IT8705F Super IO Sensors' (confidence: 9)
    
    To load everything that is needed, add this to /etc/modules:
    #----cut here----
    # Chip drivers
    it87
    #----cut here----
    If you have some drivers built into your kernel, the list above will
    contain too many modules. Skip the appropriate ones!
    
    Do you want to add these lines automatically to /etc/modules? (yes/NO)n
    
    Unloading i2c-dev... OK
    
    endomancer@endomancer-desktop:~$ sensors
    No sensors found!
    Make sure you loaded all the kernel drivers you need.
    Try sensors-detect to find out which these are.
    endomancer@endomancer-desktop:~$
    Afterwards I went into /etc/modules to look and seen

    Code:
    # /etc/modules: kernel modules to load at boot time.
    #
    # This file contains the names of kernel modules that should be loaded
    # at boot time, one per line. Lines beginning with "#" are ignored.
    
    lp
    
    # Generated by sensors-detect on Mon Apr  5 14:27:16 2010
    # Chip drivers
    it87
    Can now be found at: https://openlinuxforums.org thanks to this forum's style of moderation
    The pen maybe be mightier than the sword, but a slap in the face with a keyboard really F^%$ing hurts

  3. #12363
    Join Date
    Oct 2009
    Location
    The Netherlands
    Beans
    183
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Post your .conkyrc files w/ screenshots

    Do you guys know if there's any way to:

    1) get Conky to work with Gmusicbrowser? There's a thread for it here but I couldn't figure out how to make the script work.

    2) if there's a way to make Conky display covert art from Rhythmbox? But here's the catch, ALL my cover arts are IN the ID3 V2.3 tag and not as a .jpg file in their folders.

  4. #12364
    Join Date
    Sep 2007
    Location
    Oostkamp; Belgium
    Beans
    6
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Pott View Post
    Do you guys know if there's any way to:

    2) if there's a way to make Conky display covert art from Rhythmbox? But here's the catch, ALL my cover arts are IN the ID3 V2.3 tag and not as a .jpg file in their folders.
    You don't need conky for that.
    Make use of the "desktop art" plugin

    http://nedrebo.org/code/rhythmbox/desktop_art/

  5. #12365
    Join Date
    Feb 2008
    Location
    I'm lost ... HELP!
    Beans
    1,014
    Distro
    Xubuntu

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Pott View Post
    Do you guys know if there's any way to:

    1) get Conky to work with Gmusicbrowser? There's a thread for it here but I couldn't figure out how to make the script work.

    2) if there's a way to make Conky display covert art from Rhythmbox? But here's the catch, ALL my cover arts are IN the ID3 V2.3 tag and not as a .jpg file in their folders.
    In the gmusicbrowser audio settings you can change the player it uses from gstreamer to mplayer and ad the mpd variables you want displayed to your conky. See: http://conky.sourceforge.net/variables.html

    There are also variables for 2 other players I don't know xmms2 and bmpx. I'd make a test conky using ${bmpx_title} ${xmms2_title} and ${mpd_title} and see what variable displays useful info for the player you use.

    Like gmusicbrowser most media players are a pretty and/or functional interface, that below the interface use more basic players like mplayer to play the music.

  6. #12366
    Join Date
    Oct 2009
    Location
    The Netherlands
    Beans
    183
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Post your .conkyrc files w/ screenshots

    Fantastic guys!! Desktop art is exactly what I wanted. I'll see if I can find something similar in gmusicbrowser! Thanks!

  7. #12367
    Join Date
    Feb 2008
    Location
    52°38'41.6"N/1°19'43.6"E
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Pott View Post
    Fantastic guys!! Desktop art is exactly what I wanted. I'll see if I can find something similar in gmusicbrowser! Thanks!
    I have a slightly modified version in the conky hardcore PPA, which has a function to remove all text and only display the art...so conky can do the text itself...

    I originally made the change and tried to provide an update to the original author but never managed to get a reply...

    The package is called "rhythmbox-desktop-art" and is available via Synaptic/apt-get after following any of the first post install instructions for my conky scripts which setup the conky hardcore PPA (link in my sig)

    Cheers

  8. #12368
    Join Date
    Feb 2008
    Location
    I'm lost ... HELP!
    Beans
    1,014
    Distro
    Xubuntu

    Re: Post your .conkyrc files w/ screenshots

    Fond a new cool cat for conky.

    Code:
    cat /sys/devices/system/cpu/cpu0/cpufreq/stats/total_trans
    Gives the average CPU clock for scaling CPUs (since boot I presume).
    Bah, it's the number of times the CPU changes frequency.

    If you want to know how much time is spent in each state there's also:
    Code:
    cat /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state
    Last edited by miegiel; April 5th, 2010 at 07:49 PM. Reason: wheeee 666 beans ^_^

  9. #12369
    Join Date
    May 2009
    Location
    #Ubuntu-CA
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Post your .conkyrc files w/ screenshots

    God i need to start making mine good. Its quite basic
    Running a forum? Check out MyBB.

  10. #12370
    Join Date
    Sep 2008
    Location
    Italy Varese..
    Beans
    8
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Post your .conkyrc files w/ screenshots

    How do I do to see if have some available updatings in Arch?

    Could this lace be all right?


    Code:
    Arch-pkg: ${execi 3 pacman -Qu | grep -v "$(sed -n '/^Ign/!d; s/^IgnorePkg.*= //; s/ /\\|/gp' /etc/pacman.conf)" | wc -l}

Page 1237 of 2325 FirstFirst ... 2377371137118712271235123612371238123912471287133717372237 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •