that first post of November 2004 is still updated and valid?
I don't want to engage myself in something outdated, just to discover after endelssly errors that that howto was quite old!
I'm on Ubuntu 7.10...
thank you!
that first post of November 2004 is still updated and valid?
I don't want to engage myself in something outdated, just to discover after endelssly errors that that howto was quite old!
I'm on Ubuntu 7.10...
thank you!
I only had to install lm-sensors with synaptic, after that run the command sensors-detect and a reboot. It worked like a charm!
Guide still works like a charm!
To be honest, I didn't realize that the 1st post was 3+ years old until AFTER I followed it (nice attention to detail, huh?), but it worked without any problems.
Thanks again for posting this guide.
Worked for me in Gutsy...
But my Intel DG965RY reported sensors only for the CPU temp... Hmnn that's odd
Hi,
The guide worked for me, but I don't know which temperatures are my CPU! I have an Athlon 64 X2 4000, socket AM2, and an MSI motherboard.
I'm running Ubuntu 7.10:
Here's the output from sensors:Code:$ uname -a Linux hostname 2.6.22-14-generic #1 SMP Tue Dec 18 05:28:27 UTC 2007 x86_64 GNU/Linux
The core temps seem a lot lower than the CPU Temp, and the temps for the same core differ by a lot as well (34C and 23C, same core!?) Which is correct? Could someone inform me? Thanks a lot.Code:$ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +34°C Core0 Temp: +23°C Core1 Temp: +28°C Core1 Temp: +25°C w83627ehf-isa-0290 Adapter: ISA adapter VCore: +1.30 V (min = +0.00 V, max = +1.74 V) in1: +12.51 V (min = +13.46 V, max = +11.77 V) ALARM AVCC: +3.30 V (min = +3.12 V, max = +2.61 V) ALARM 3VCC: +3.30 V (min = +4.08 V, max = +4.03 V) ALARM in4: +2.04 V (min = +0.98 V, max = +1.98 V) ALARM in5: +1.61 V (min = +1.53 V, max = +1.35 V) ALARM in6: +5.09 V (min = +6.07 V, max = +4.48 V) ALARM VSB: +3.30 V (min = +3.82 V, max = +3.04 V) ALARM VBAT: +3.22 V (min = +1.57 V, max = +1.92 V) ALARM in9: +1.61 V (min = +1.94 V, max = +1.34 V) ALARM Case Fan: 0 RPM (min = 0 RPM, div = 128) CPU Fan: 1730 RPM (min = 5532 RPM, div = 4) ALARM Aux Fan: 0 RPM (min = 3515 RPM, div = 128) ALARM fan5: 0 RPM (min = 0 RPM, div = 128) Sys Temp: +33°C (high = -71°C, hyst = +122°C) CPU Temp: +49.0°C (high = +100.0°C, hyst = +95.0°C) AUX Temp: +51.0°C (high = +100.0°C, hyst = +95.0°C)
Last edited by mackid; January 5th, 2008 at 09:04 AM. Reason: Spelling
I have just installed the same CPU on an Asus MB (replacing a Sempron 3400 which seemed to report temps ok) and have similar weird core temps.
Doing a web search seems to show this as a known problem, and it may be fixed in the new lm-sensors 3.0 package - we will just have to wait for the Ubuntu/Debian developers to start using this new package.
Regards, David.
Please use the Forum search and Wiki search for immediate help
Please mark your thread as Solved when appropriate
New to technical forums?: How To Ask Questions The Smart Way
Got my sensors up and running... what choices do i have as far as graphical output for Im-sensors? Xsensor is nice but I would prefer somthing I can minimze to a bar and set my own alarm bands for.
----
BFL Group-- Molding A Better Tomorrow Out Of Yesterday's Garbage
Bookmarks