Ok, I'm not sure if I am doing something correctly...
Code:
jeremey@ubuntu:~$ sudo sensors-detect
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters...
Use driver `i2c-viapro' for device 0000:00:11.0: VIA Technologies VT8233 VLink South Bridge
We will now try to load each adapter module in turn.
Module `i2c-viapro' already loaded.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
them scanned by manually loading the modules before running this script.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: SMBus Via Pro adapter at 0400 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x18
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `National Semiconductor LM64'... No
Client found at address 0x2d
Probing for `Myson MTP008'... No
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM78-J'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM85 or LM96000'... No
Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... No
Probing for `Analog Devices ADT7476'... No
Probing for `Andigilog aSC7611'... No
Probing for `Andigilog aSC7621'... No
Probing for `National Semiconductor LM87'... No
Probing for `National Semiconductor LM93'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83783S'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Winbond W83791SD'... No
Probing for `Winbond W83627HF'... Success!
(confidence 8, driver `use-isa-instead', other addresses: 0x48 0x49)
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Winbond W83L784R/AR/G'... No
Probing for `Winbond W83L785R/G'... No
Probing for `Genesys Logic GL518SM Revision 0x00'... No
Probing for `Genesys Logic GL518SM Revision 0x80'... No
Probing for `Genesys Logic GL520SM'... No
Probing for `Genesys Logic GL525SM'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1026'... No
Probing for `Analog Devices ADM1025'... No
Probing for `Philips NE1619'... No
Probing for `Analog Devices ADM1029'... No
Probing for `Analog Devices ADM1030'... No
Probing for `Analog Devices ADM1031'... No
Probing for `Analog Devices ADM1022'... No
Probing for `Texas Instruments THMC50'... No
Probing for `VIA VT1211 (I2C)'... No
Probing for `ITE IT8712F'... No
Probing for `ALi M5879'... No
Probing for `SMSC LPC47M15x/192/292/997'... No
Probing for `SMSC DME1737'... No
Probing for `SMSC SCH5027D-NW'... No
Probing for `Fintek F75373S/SG'... No
Probing for `Fintek F75375S/SP'... No
Probing for `Fintek F75387SG/RG'... No
Probing for `Analog Devices ADM1024'... No
Probing for `Winbond W83791D'... No
Client found at address 0x48
Probing for `National Semiconductor LM75'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Maxim MAX6650/MAX6651'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Client found at address 0x49
Probing for `National Semiconductor LM75'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... Yes
Found `Winbond W83627HF/F/HG/G Super IO Sensors' Success!
(address 0x290, driver `w83627hf')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no):
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD K10 thermal sensors... No
Intel Core family thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus, address 0x290
Chip `Winbond W83627HF/F/HG/G Super IO Sensors' (confidence: 9)
I will now generate the commands needed to load the required modules.
Just press ENTER to continue:
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
w83627hf
#----cut here----
Do you want to add these lines automatically? (yes/NO)
jeremey@ubuntu:~$ sudo /etc/init.d/module-init-tools
Usage: /etc/init.d/module-init-tools COMMAND
----> My edit: what goes into COMMAND? I tried w3627hf <------
jeremey@ubuntu:~$ sudo /etc/init.d/module-init-tools w83627hf
Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service module-init-tools w83627hf
The script you are attempting to invoke has been converted to an Upstart
job, but w83627hf is not supported for Upstart jobs.
jeremey@ubuntu:~$ sudo gedit /etc/modprobe.d/local
jeremey@ubuntu:~$ sudo update-modules
sudo: update-modules: command not found
jeremey@ubuntu:~$ sudo gedit /etc/modules
jeremey@ubuntu:~$ sudo modprobe i2c-viapro
WARNING: All config files need .conf: /etc/modprobe.d/local, it will be ignored in a future release.
jeremey@ubuntu:~$ sudo i2c-0
sudo: i2c-0: command not found
jeremey@ubuntu:~$ sudo modprobe i2c-0
WARNING: All config files need .conf: /etc/modprobe.d/local, it will be ignored in a future release.
FATAL: Module i2c_0 not found.
jeremey@ubuntu:~$ sudo rm /etc/modprobe.d/local
jeremey@ubuntu:~$ sudo modprobe i2c-viapro
jeremey@ubuntu:~$ sudo modprobe i2c-0
FATAL: Module i2c_0 not found.
jeremey@ubuntu:~$ sudo modprobe use-isa-instead
FATAL: Module use_isa_instead not found.
jeremey@ubuntu:~$ sudo modprobe i2c-isa
FATAL: Module i2c_isa not found.
jeremey@ubuntu:~$ sudo modprobe w83627hf
FATAL: Error inserting w83627hf (/lib/modules/2.6.31-16-generic/kernel/drivers/hwmon/w83627hf.ko): Device or resource busy
jeremey@ubuntu:~$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
jeremey@ubuntu:~$
I have a MSI K7T266 Pro Ver.1 mobo, and I know there are sensors and I want to control fan speed after getting this working. This thing sounds like it's gonna lift off!
I am running 9.10 and the latest updates.
Thanks,
J
Bookmarks