To make the sensors modules behave correctly, add these lines to
/etc/modules:
#----cut here----
# I2C adapter drivers
i2c-nforce2
i2c-isa
# I2C chip drivers
eeprom
it87
#----cut here----
Do you want to add these lines to /etc/modules automatically? (yes/NO)y
sudo modprobe i2c-sensor
FATAL: Module i2c_sensor not found.
sudo modprobe i2c-nforce2
sudo modprobe i2c-isa
sudo modprobe eeprom
sudo modprobe it87
sudo depmod -a
sudo update-modules
sensors
it8712-isa-0290
Adapter: ISA adapter
VCore 1: +1.49 V (min = +0.00 V, max = +4.08 V)
VCore 2: +1.47 V (min = +1.28 V, max = +1.68 V)
+3.3V: +3.33 V (min = +2.78 V, max = +3.78 V)
+5V: +4.97 V (min = +4.49 V, max = +5.48 V)
+12V: +11.84 V (min = +9.98 V, max = +13.95 V)
-12V: -13.62 V (min = -22.94 V, max = -17.05 V) ALARM
-5V: -1.38 V (min = -9.14 V, max = -7.75 V) ALARM
Stdby: +5.05 V (min = +4.49 V, max = +5.48 V)
VBat: +3.09 V
fan1: 0 RPM (min = 811 RPM, div = 8)
fan2: 0 RPM (min = 811 RPM, div = 8)
fan3: 6490 RPM (min = 811 RPM, div = 8)
M/B Temp: +20°C (low = +127°C, high = +63°C) sensor = diode
CPU Temp: +25°C (low = +127°C, high = +63°C) sensor = thermistor
Temp3: +36°C (low = +127°C, high = +63°C) sensor = thermistor
Bookmarks