! ! ! URGENT HELP NEEDED ! ! !
I know absolutely nothing about Ubuntu/Linux OSs...
I dunno if I should start a dedicated thread regarding my problem, or just complain () here?
I will start here, and if mods or Admin decides to move it toits own thread, so be it...
As I stated, I know absolutely minimal info about Ubuntu/Linux... other than it is safe, and very tweakable.
I need to run Adobe CS4 Master Collection on my box, so I thought I would run VirtualBox, or something similar on Ubuntu and run Vista off it, so I could use the Adobe suite.
VirtualBox gave me a really small screen, which does no justice to any graphic designer. Anyway, I could not allocate more than 128MB of my 1GB gc to VirtualBox anyway... As for ram issues, that is another thing... I could successfully only allocate just under half my 8GB ram to the virtual box (or was that maximum upto half?).
Ok, my conundrum...
I have installed Ubuntu a couple of days ago, not realising I would need to dual-boot in the future.
After my problem of not getting the desired results with VirtualBox, I decided to do a dual-boot and run everything on Ubuntu, and use Vista (on the dual) solely for graphic/multimedia design purposes.
So far I have tried Googling for dual-booting, with Ubuntu installed first, and came across these links:
Code:
http://users.bigpond.net.au/hermanzone/
http://www.eloff.se/tutorials.php?ubuntu_vista_dualboot
http://burace17.wordpress.com/2008/05/28/how-to-dual-boot-windows-vista-and-ubuntu-ubuntu-installed-first/
I have followed the last link's instructions, as it seemed the most straightforward.
I get stuck on Step #7
I get the error that I can't use that partition to install Vista on...
So, I then added my spare HDD to see if I could install it on that... Same problem!
Mind you, I now have two HDDs in my box. One 320GB SATA with Ubuntu installed onto it. Following the instructions in the above link, I gave my Ubuntu 30GB and the rest was formatted while trying to setup Vista on it.
The second is a 200GB IDE, partitioned (previously) to 150GB/50GB with the jumper set to Cable Select.
One last note, when I tried installing onto the IDE HDD, Windows' setup did not detect the partitioned part of the SATA HDD (or did it not detect the IDE at all??? Now I am confused! I will check now, and be back in 10-20 minutes. But if the problem lies elsewhere, please do not wait for me to come back. Just say your mind already ).
I know, you are probably going to say, "Go ask a Microsoft forum!", but I somehow trust the folk here more, than I could any MS forum...
Now, I would like to ask the geeks and/or nerds here at UbuntuForums, if they could please help me resolve my predicament... (btw, I am surprised there are no emotes for "geek" or "nerd" here.. I may have to design one once I get the Vista part running, and run it past Admin here
EDIT: I checked the HDD, and I forgot to plug the other end of the IDE cable into the motherboard
Anyway, I plugged it in, tried it with Cable Select and Master the switches... Both not working...
I wrote down the error/warning message in Windows setup this time, maybe this may shed some light?
When I select the partition, it says:
This computer hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu.
When I click the Install (or was it the 'Next') button:
Windows is unable to find a system volume that meets its criteria for installation.
Now, in light of the first message, I tried looking at the BIOS settings to see if I could get the HDD to be detected manually, and I failed
Bookmarks