I'm having problems. I've confirmed that my Broadcom 4318 is working; iwlist eth1 scan shows me both mine and my neighbour's networks. Here's what my /etc/wpa_supplicant.conf looks like:
When I run sudo wpa_supplicant -Dndiswrapper -ieth1 -c/etc/wpa_supplicant.conf -dd I see a few things that don't look right. Here I've bolded them:Code:# Minimal /etc/wpa_supplicant.conf to associate with open # access points. Please see # /usr/share/doc/wpasupplicant/wpa_supplicant.conf.gz for more complete # configuration parameters. ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 eapol_version=1 ap_scan=2 fast_reauth=1 ### Associate with any open access point ### Scans/ESSID changes can be done with wpa_cli # network={ # ssid="" # key_mgmt=NONE # } # reading passphrase from stdin network={ ssid="obcomputer" scan_ssid=1 proto=WPA key_mgmt=WPA-PSK # pairwise=CCMP TKIP # group=CCMP TKIP psk=792f89822002762c11thisnotmyrealpsk114236da73a3f7c9b }
@matthewbohCode:Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'ndiswrapper' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' ctrl_interface_group=0 eapol_version=1 ap_scan=2 fast_reauth=1 Line: 22 - start of a new network block ssid - hexdump_ascii(len=10): 6f 62 63 6f 6d 70 75 74 65 72 obcomputer scan_ssid=1 (0x1) proto: 0x1 key_mgmt: 0x2 PSK - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='obcomputer' Initializing interface (2) 'eth1' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 SIOCGIWRANGE: WE(compiled)=20 WE(source)=18 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf WEXT: Operstate: linkmode=1, operstate=5 Own MAC address: 00:14:a4:3b:7c:63 Driver does not support WPA. wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 Setting scan request: 0 sec 100000 usec Added interface eth1 Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added State: DISCONNECTED -> SCANNING Trying to associate with SSID 'obcomputer' Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: No WPA/RSN IE available from association info WPA: Set cipher suites based on configuration WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2 WPA: clearing AP WPA IE WPA: clearing AP RSN IE WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02 No keys have been configured - skip key clearing State: SCANNING -> ASSOCIATING WEXT: Operstate: linkmode=-1, operstate=5 Association request to the driver failed Setting authentication timeout: 5 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto Authentication with 00:00:00:00:00:00 timed out. Added BSSID 00:00:00:00:00:00 into blacklist State: ASSOCIATING -> DISCONNECTED WEXT: Operstate: linkmode=-1, operstate=5 No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Trying to associate with SSID 'obcomputer' Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: No WPA/RSN IE available from association info WPA: Set cipher suites based on configuration WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2 WPA: clearing AP WPA IE WPA: clearing AP RSN IE WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02 No keys have been configured - skip key clearing State: SCANNING -> ASSOCIATING WEXT: Operstate: linkmode=-1, operstate=5 Association request to the driver failed Setting authentication timeout: 5 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto Authentication with 00:00:00:00:00:00 timed out. BSSID 00:00:00:00:00:00 blacklist count incremented to 2 State: ASSOCIATING -> DISCONNECTED WEXT: Operstate: linkmode=-1, operstate=5 No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Trying to associate with SSID 'obcomputer' Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: No WPA/RSN IE available from association info WPA: Set cipher suites based on configuration WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2 WPA: clearing AP WPA IE WPA: clearing AP RSN IE WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02 No keys have been configured - skip key clearing State: SCANNING -> ASSOCIATING WEXT: Operstate: linkmode=-1, operstate=5 Association request to the driver failed Setting authentication timeout: 5 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto CTRL-EVENT-TERMINATING - signal 2 received Removing interface eth1 State: ASSOCIATING -> DISCONNECTED WEXT: Operstate: linkmode=-1, operstate=5 No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Failed to disable WPA in the driver. No keys have been configured - skip key clearing WEXT: Operstate: linkmode=0, operstate=6 Removed BSSID 00:00:00:00:00:00 from blacklist (clear) Cancelling scan request
I looks like you have similar hardware to mine. Maybe you could post your wpa_supplicant.conf?
@all
Any help or suggestions would be greatly appreciated. I'd love to get my new laptop online on linux.
EDIT: Nevermind, I have it working. I changed the driver to wext and ap_scan to 1. Though no one had a chance to help me directly, I'd like to thank you all for your help; this thread has really been helpful.
Bookmarks