I fixed my problem. I have my domain running I think. The problem is I cannot browse to the my internal site via the new domain name.
Here are the results of the tests:
Code:
ja@x:/etc/apache2$ ping x.local
PING x.local (127.0.1.1) 56(84) bytes of data.
64 bytes from x.local (127.0.1.1): icmp_seq=1 ttl=64 time=0.014 ms
64 bytes from x.local (127.0.1.1): icmp_seq=2 ttl=64 time=0.012 ms
64 bytes from x.local (127.0.1.1): icmp_seq=3 ttl=64 time=0.012 ms
64 bytes from x.local (127.0.1.1): icmp_seq=4 ttl=64 time=0.013 ms
^C
--- x.local ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2998ms
rtt min/avg/max/mdev = 0.012/0.012/0.014/0.004 ms
ja@x:/etc/apache2$ dig x.local
; <<>> DiG 9.7.0-P1 <<>> x.local
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 64267
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;x.local. IN A
;; AUTHORITY SECTION:
x.local. 38400 IN SOA ns1.x.local. admin.x.local. 2010011001 28800 3600 604800 38400
ja@xserv:/etc/apache2$ dig -x 127.0.0.1
; <<>> DiG 9.7.0-P1 <<>> -x 127.0.0.1
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 64924
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 2
;; QUESTION SECTION:
;1.0.0.127.in-addr.arpa. IN PTR
;; ANSWER SECTION:
1.0.0.127.in-addr.arpa. 604800 IN PTR localhost.
;; AUTHORITY SECTION:
127.in-addr.arpa. 604800 IN NS localhost.
;; ADDITIONAL SECTION:
localhost. 604800 IN A 127.0.0.1
localhost. 604800 IN AAAA ::1
;; Query time: 0 msec
;; SERVER: 192.168.2.20#53(192.168.2.20)
;; WHEN: Mon Jan 10 20:43:47 2011
;; MSG SIZE rcvd: 121
ja@xserv:/etc/bind$ named-checkzone x.local /etc/bind/zones/x.local.db
/etc/bind/zones/x.local.db:1: no TTL specified; using SOA MINTTL instead
zone x.local/IN: loaded serial 2010011001
OK
It seems as though I have everything configured correctly, yet I still cannot browse to the site I have hosted off of the nameserver 192.168.2.20. The router ip is 192.168.2.1.
Here are my files:
named.conf.local
Code:
//
// Do any local configuration here
//
// Consider adding the 1918 zones here, if they are not used in your
// organization
//include "/etc/bind/zones.rfc1918";
# This is the zone definition. replace example.com with your domain name
zone "x.local" {
type master;
file "/etc/bind/zones/x.local.db";
};
zone "2.168.192.in-addr.arpa" {
type master;
file "/etc/bind/zones/rev.2.168.192.in-addr.arpa";
named.conf.options
Code:
options {
directory "/var/cache/bind";
// If there is a firewall between you and nameservers you want
// to talk to, you may need to fix the firewall to allow multiple
// ports to talk. See http://www.kb.cert.org/vuls/id/800113
// If your ISP provided one or more IP addresses for stable
// nameservers, you probably want to use them as forwarders.
// Uncomment the following block, and insert the addresses replacing
// the all-0's placeholder.
forwarders {
192.168.2.1;
};
auth-nxdomain no; # conform to RFC1035
listen-on-v6 { any; };
};
x.local.db
Code:
x.local. IN SOA ns1.x.local. admin.x.local. (
2010011001
28800
3600
604800
38400
);
x.local. IN NS ns1.x.local.
www IN A 192.168.2.20
ns1 IN A 192.168.2.20
* IN A 192.168.2.20
rev.2.168.192.in-addr.arpa
Code:
@ IN SOA ns1.x.local. admin.x.local. (
2010011001;
28800;
604800;
604800;
86400
)
IN NS ns1.x.local.
20 IN PTR x.local
resolv.conf
Code:
search x.local
nameserver 192.168.2.20
Any help would be greatly appreciated. I can't seem to figure out what I am doing wrong.
Edit: I can browse to the site by putting in the ip address of the nameserver/webhost into my browser.
Bookmarks