Results 1 to 1 of 1

Thread: Problems with Flea3 USB 3.0 camera

  1. #1
    Join Date
    Sep 2014
    Beans
    1

    Problems with Flea3 USB 3.0 camera

    Hello. I have a Flea3 USB 3.0 camera connected to Intel NUC DE3815TYKHE board. The camera provides 120fps and resolution 1.3Mpx. I've installed Ubuntu 14.04.1 LTS.

    Usually camera works well and software is able to process all the 120 frames each second. But time to time the camera runs in low speed mode only (~35 fps). It happens randomly. If I run my software now it works in 120fps mode (flycap says that the camera is connected to USB 3.0), but in 5 minutes it may say that the only 35fps mode is available (this case flycap says that camera is connected to USB 2.0). But actually I didn't reconnect anything.

    I don't face with such problem when I connect the camera to PC Windows 7.

    I tried to look at lsusb. It's completely unclear why it is connected to different busses.

    bad lsusb good lsusb
    Bus 001 Device 003: ID 1e10:3006 Point Grey Research, Inc. Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.10
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    idVendor 0x1e10 Point Grey Research, Inc.
    idProduct 0x3006
    bcdDevice 0.00
    iManufacturer 1 Point Grey Research
    iProduct 2 Flea3 FL3-U3-13S2C
    iSerial 3 00BE234D
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 500mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 255 Vendor Specific Class
    bInterfaceSubClass 0
    bInterfaceProtocol 0
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    Bus 002 Device 002: ID 1e10:3006 Point Grey Research, Inc. Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 3.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 9
    idVendor 0x1e10 Point Grey Research, Inc.
    idProduct 0x3006
    bcdDevice 0.00
    iManufacturer 1 Point Grey Research
    iProduct 2 Flea3 FL3-U3-13S2C
    iSerial 3 00BE234D
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 44
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 224mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 2
    bInterfaceClass 255 Vendor Specific Class
    bInterfaceSubClass 0
    bInterfaceProtocol 0
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0400 1x 1024 bytes
    bInterval 0
    bMaxBurst 15
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x82 EP 2 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0040 1x 64 bytes
    bInterval 1
    bMaxBurst 0
    Attached Files Attached Files

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •