I am wit's end. Spent 8+ hours on this and still getting errors. The card works on my Windows 7 installation, but I want it on linux for my HTPC. Here's the result of dmseg:
Code:
chris@HTPC:~$ dmesg | grep saa7164
[ 15.100541] saa7164 driver loaded
[ 15.101391] CORE saa7164[0]: subsystem: 0070:f111, board: Hauppauge WinTV-HVR2200 [card=4,insmod option]
[ 15.101395] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xfd800000
[ 15.360444] saa7164_downloadfirmware() no first image
[ 15.360458] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
[ 17.539480] saa7164_downloadfirmware() firmware read 4019072 bytes.
[ 17.539485] saa7164_downloadfirmware() firmware loaded.
[ 17.539495] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
[ 17.539500] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
[ 17.539502] saa7164_downloadfirmware() BSLSize = 0x0
[ 17.539503] saa7164_downloadfirmware() Reserved = 0x0
[ 17.539505] saa7164_downloadfirmware() Version = 0x1661c00
[ 23.564017] saa7164_downloadimage() Image downloaded, booting...
[ 23.668030] saa7164_downloadimage() Image booted successfully.
[ 26.404028] saa7164_downloadimage() Image downloaded, booting...
[ 28.172028] saa7164_downloadimage() Image booted successfully.
[ 28.199488] saa7164_api_i2c_read() error, ret(1) = 0x13
[ 28.458565] saa7164_api_i2c_read() error, ret(1) = 0x13
[ 28.458581] saa7164_dvb_register() Frontend initialization failed
[ 28.458583] saa7164_initdev() Failed to register dvb adapters on porta
[ 28.459438] saa7164_api_i2c_read() error, ret(1) = 0x13
[ 28.459443] saa7164_dvb_register() Frontend initialization failed
[ 28.459445] saa7164_initdev() Failed to register dvb adapters on portb
[ 28.459545] saa7164[0]: registered device video0 [mpeg]
[ 28.695580] saa7164[0]: registered device video1 [mpeg]
[ 28.907148] saa7164[0]: registered device vbi0 [vbi]
[ 28.907242] saa7164[0]: registered device vbi1 [vbi]
Can anyone help me with the errors?
Thanks!
Bookmarks