Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: 12.04 Cloned Hardrive is painfully slow

  1. #11
    Join Date
    Apr 2005
    Location
    Putaruru, NZ
    Beans
    40

    Re: 12.04 Cloned Hardrive is painfully slow

    Should add it does boot after displaying those messages, but it is phenomanally slow
    and i have jumpered the dive to set it at 150
    Also swapped sata cable and sata port that it is plugged into

    Just waiting for machine to reboot so i can run the smart check thingie

  2. #12
    Join Date
    Apr 2005
    Location
    Putaruru, NZ
    Beans
    40

    Re: 12.04 Cloned Hardrive is painfully slow

    Code:
    user@user-desktop:~$ sudo smartctl -a /dev/sda
    smartctl 5.41 2011-06-09 r3365 [i686-linux-3.8.0-42-generic] (local build)
    Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
    
    === START OF INFORMATION SECTION ===
    Model Family:     Seagate DB35.3
    Device Model:     ST3320820SCE
    Serial Number:    9QFBYZN3
    Firmware Version: 3.ACE
    User Capacity:    320,072,933,376 bytes [320 GB]
    Sector Size:      512 bytes logical/physical
    Device is:        In smartctl database [for details use: -P show]
    ATA Version is:   7
    ATA Standard is:  Exact ATA specification draft version not indicated
    Local Time is:    Sun Jun 22 12:36:22 2014 NZST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    See vendor-specific Attribute list for marginal Attributes.
    
    General SMART Values:
    Offline data collection status:  (0x82)	Offline data collection activity
    					was completed without error.
    					Auto Offline Data Collection: Enabled.
    Self-test execution status:      (   0)	The previous self-test routine completed
    					without error or no self-test has ever 
    					been run.
    Total time to complete Offline 
    data collection: 		(15556) seconds.
    Offline data collection
    capabilities: 			 (0x5b) SMART execute Offline immediate.
    					Auto Offline data collection on/off support.
    					Suspend Offline collection upon new
    					command.
    					Offline surface scan supported.
    					Self-test supported.
    					No Conveyance Self-test supported.
    					Selective Self-test supported.
    SMART capabilities:            (0x0003)	Saves SMART data before entering
    					power-saving mode.
    					Supports SMART auto save timer.
    Error logging capability:        (0x01)	Error logging supported.
    					General Purpose Logging supported.
    Short self-test routine 
    recommended polling time: 	 (   1) minutes.
    Extended self-test routine
    recommended polling time: 	 ( 115) minutes.
    SCT capabilities: 	       (0x0031)	SCT Status supported.
    					SCT Feature Control supported.
    					SCT Data Table supported.
    
    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x000f   103   097   006    Pre-fail  Always       -       5555400
      3 Spin_Up_Time            0x0003   095   094   000    Pre-fail  Always       -       0
      4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1187
      5 Reallocated_Sector_Ct   0x0033   099   099   036    Pre-fail  Always       -       56
      7 Seek_Error_Rate         0x000f   088   060   030    Pre-fail  Always       -       714385960
      9 Power_On_Hours          0x0032   060   060   000    Old_age   Always       -       35405
     10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       108
    187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       60448
    189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
    190 Airflow_Temperature_Cel 0x0022   062   045   045    Old_age   Always   In_the_past 38 (Min/Max 23/38)
    194 Temperature_Celsius     0x0022   038   055   000    Old_age   Always       -       38 (0 14 0 0)
    195 Hardware_ECC_Recovered  0x001a   070   042   000    Old_age   Always       -       151797062
    197 Current_Pending_Sector  0x0012   099   001   000    Old_age   Always       -       21
    198 Offline_Uncorrectable   0x0010   099   001   000    Old_age   Offline      -       21
    199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
    202 Data_Address_Mark_Errs  0x0032   097   250   000    Old_age   Always       -       3
    
    SMART Error Log Version: 1
    ATA Error Count: 61264 (device log contains only the most recent five errors)
    	CR = Command Register [HEX]
    	FR = Features Register [HEX]
    	SC = Sector Count Register [HEX]
    	SN = Sector Number Register [HEX]
    	CL = Cylinder Low Register [HEX]
    	CH = Cylinder High Register [HEX]
    	DH = Device/Head Register [HEX]
    	DC = Device Command Register [HEX]
    	ER = Error register [HEX]
    	ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.
    
    Error 61264 occurred at disk power-on lifetime: 35405 hours (1475 days + 5 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 e3 ea 1d e1  Error: UNC at LBA = 0x011deae3 = 18737891
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 e0 ea 1d e1 00      01:48:20.414  READ DMA
      b0 d5 01 00 4f c2 00 00      01:48:20.406  SMART READ LOG
      27 00 00 00 00 00 e0 00      01:48:19.771  READ NATIVE MAX ADDRESS EXT
      ec 00 00 00 00 00 a0 02      01:48:19.730  IDENTIFY DEVICE
      ef 03 46 00 00 00 a0 02      01:48:19.661  SET FEATURES [Set transfer mode]
    
    Error 61263 occurred at disk power-on lifetime: 35405 hours (1475 days + 5 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 e3 ea 1d e1  Error: UNC at LBA = 0x011deae3 = 18737891
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 e0 ea 1d e1 00      01:48:18.771  READ DMA
      b0 da 00 00 4f c2 00 00      01:48:18.136  SMART RETURN STATUS
      27 00 00 00 00 00 e0 00      01:48:19.771  READ NATIVE MAX ADDRESS EXT
      ec 00 00 00 00 00 a0 02      01:48:19.730  IDENTIFY DEVICE
      ef 03 46 00 00 00 a0 02      01:48:19.661  SET FEATURES [Set transfer mode]
    
    Error 61262 occurred at disk power-on lifetime: 35405 hours (1475 days + 5 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 e3 ea 1d e1  Error: UNC at LBA = 0x011deae3 = 18737891
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 e0 ea 1d e1 00      01:48:18.771  READ DMA
      b0 d1 01 01 4f c2 00 00      01:48:18.136  SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
      27 00 00 00 00 00 e0 00      01:48:18.007  READ NATIVE MAX ADDRESS EXT
      ec 00 00 00 00 00 a0 02      01:48:18.004  IDENTIFY DEVICE
      ef 03 46 00 00 00 a0 02      01:48:18.003  SET FEATURES [Set transfer mode]
    
    Error 61261 occurred at disk power-on lifetime: 35405 hours (1475 days + 5 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 e3 ea 1d e1  Error: UNC at LBA = 0x011deae3 = 18737891
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 e0 ea 1d e1 00      01:48:17.116  READ DMA
      b0 d0 01 00 4f c2 00 00      01:48:18.136  SMART READ DATA
      35 00 e0 60 42 04 e0 00      01:48:18.007  WRITE DMA EXT
      ca 00 08 b8 0a 04 e4 00      01:48:18.004  WRITE DMA
      ca 00 08 50 0a 04 e4 00      01:48:18.003  WRITE DMA
    
    Error 61260 occurred at disk power-on lifetime: 35405 hours (1475 days + 5 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 e3 ea 1d e1  Error: UNC at LBA = 0x011deae3 = 18737891
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 e0 ea 1d e1 00      01:48:17.116  READ DMA
      ec 00 01 00 00 00 00 00      01:48:17.101  IDENTIFY DEVICE
      ca 00 08 90 fb 25 e2 00      01:48:17.085  WRITE DMA
      27 00 00 00 00 00 e0 00      01:48:17.032  READ NATIVE MAX ADDRESS EXT
      ec 00 00 00 00 00 a0 02      01:48:17.027  IDENTIFY DEVICE
    
    SMART Self-test log structure revision number 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Short captive       Completed without error       00%     30489         -
    # 2  Short captive       Completed without error       00%     30489         -
    # 3  Short offline       Completed without error       00%     30174         -
    # 4  Short offline       Completed without error       00%     29616         -
    # 5  Short offline       Completed without error       00%     28025         -
    # 6  Short offline       Completed without error       00%     27399         -
    # 7  Short offline       Completed without error       00%     26672         -
    # 8  Short offline       Completed without error       00%     24473         -
    # 9  Short offline       Completed without error       00%     24352         -
    #10  Short offline       Completed without error       00%     23178         -
    #11  Short offline       Completed without error       00%     22619         -
    #12  Short offline       Completed without error       00%     22042         -
    #13  Short offline       Completed without error       00%     21025         -
    #14  Short offline       Completed without error       00%     20515         -
    #15  Short offline       Completed without error       00%     20010         -
    #16  Short offline       Completed without error       00%     18411         -
    #17  Short offline       Completed without error       00%     17784         -
    #18  Short offline       Aborted by host               90%     17651         -
    #19  Short offline       Aborted by host               90%     17416         -
    #20  Short offline       Completed without error       00%     15830         -
    #21  Short offline       Completed without error       00%     15267         -
    
    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    
    user@user-desktop:~$

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •