Have an old desktop PC running Xubuntu 14.04 where every once in a while an instant/abnormal shutdown would occur after a few seconds (around 5). Just before the instant shutdown occurs the Xfce shutdown dialog appears. Clicking on the Cancel button in the dialog when it appears without manual intervention a second time also causes an instant shutdown to occur.

Did see some warning on ACPI via dmesg but don't think it is very likely to be related to the issue. Previously the PC was running Ubuntu 12.04 and didn't have the abnormal/instant shutdown issue. There is an important kernel update to install in the Security section of the Software Updater although it is highly unlikely to fix the issue.


=====================
Dmesg Log
=====================

Code:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-24-generic (buildd@komainu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:31:42 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffbffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffc0000-0x000000007ffcffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff7c0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: ASUSTek Computer Inc. K8N/'K8N', BIOS 1004.005 11/26/2004
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7ffc0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01b88000, 0x01b88fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c70000-0x36e2ffff]
[    0.000000] ACPI: RSDP 000fa010 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 7ffc0000 000030 (v01 A M I  OEMRSDT  11000426 MSFT 00000097)
[    0.000000] ACPI: FACP 7ffc0200 000081 (v02 A M I  OEMFACP  11000426 MSFT 00000097)
[    0.000000] ACPI: DSDT 7ffc0400 00441D (v01  A0128 A0128003 00000003 INTL 02002026)
[    0.000000] ACPI: FACS 7ffd0000 000040
[    0.000000] ACPI: APIC 7ffc0390 000068 (v01 A M I  OEMAPIC  11000426 MSFT 00000097)
[    0.000000] ACPI: OEMB 7ffd0040 000041 (v01 A M I  OEMBIOS  11000426 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1155MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x01b89000, 0x01b89fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x7ffbffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7ffbffff]
[    0.000000] On node 0 totalpages: 524126
[    0.000000] free_area_init_node: node 0, pgdat c1990a80, node_mem_map f4c70020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2312 pages used for memmap
[    0.000000]   HighMem zone: 295874 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7be4000 s36096 r0 d21248 u57344
[    0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522342
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=7552b070-edb5-486a-9fe3-b3db47447598 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4193784 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007ffc0)
[    0.000000] Memory: 2045056K/2096504K available (6507K kernel code, 641K rwdata, 2752K rodata, 872K init, 924K bss, 51448K reserved, 1183496K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc19ae000 - 0xc1a88000   ( 872 kB)
[    0.000000]       .data : 0xc165b132 - 0xc19ad4c0   (3400 kB)
[    0.000000]       .text : 0xc1000000 - 0xc165b132   (6508 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1808.985 MHz processor
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3617.97 BogoMIPS (lpj=7235940)
[    0.004011] pid_max: default: 32768 minimum: 301
[    0.004074] Security Framework initialized
[    0.004125] AppArmor: AppArmor initialized
[    0.004127] Yama: becoming mindful.
[    0.004231] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004235] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004739] Initializing cgroup subsys memory
[    0.004757] Initializing cgroup subsys devices
[    0.004761] Initializing cgroup subsys freezer
[    0.004765] Initializing cgroup subsys blkio
[    0.004768] Initializing cgroup subsys perf_event
[    0.004773] Initializing cgroup subsys hugetlb
[    0.004831] mce: CPU supports 5 MCE banks
[    0.004874] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.004874] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.004874] tlb_flushall_shift: 4
[    0.020280] Freeing SMP alternatives memory: 32K (c1a88000 - c1a90000)
[    0.021909] ACPI: Core revision 20131115
[    0.025889] ACPI: All ACPI Tables successfully acquired
[    0.028022] ftrace: allocating 27695 entries in 55 pages
[    0.044306] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.044696] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.086298] smpboot: CPU0: AMD Athlon(tm) 64 Processor 2800+ (fam: 0f, model: 04, stepping: 0a)
[    0.088000] Performance Events: AMD PMU driver.
[    0.088000] ... version:                0
[    0.088000] ... bit width:              48
[    0.088000] ... generic registers:      4
[    0.088000] ... value mask:             0000ffffffffffff
[    0.088000] ... max period:             00007fffffffffff
[    0.088000] ... fixed-purpose events:   0
[    0.088000] ... event mask:             000000000000000f
[    0.089846] x86: Booted up 1 node, 1 CPUs
[    0.089857] smpboot: Total of 1 processors activated (3617.97 BogoMIPS)
[    0.090336] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.090737] devtmpfs: initialized
[    0.091018] EVM: security.selinux
[    0.091020] EVM: security.SMACK64
[    0.091022] EVM: security.ima
[    0.091024] EVM: security.capability
[    0.091119] PM: Registering ACPI NVS region [mem 0x7ffd0000-0x7fffffff] (196608 bytes)
[    0.093089] pinctrl core: initialized pinctrl subsystem
[    0.093228] regulator-dummy: no parameters
[    0.093268] RTC time: 10:35:18, date: 05/15/14
[    0.093339] NET: Registered protocol family 16
[    0.093565] EISA bus registered
[    0.093569] cpuidle: using governor ladder
[    0.093572] cpuidle: using governor menu
[    0.093580] node 0 link 0: io port [1000, ffffff]
[    0.093586] TOM: 0000000080000000 aka 2048M
[    0.093592] node 0 link 0: mmio [a0000, bffff]
[    0.093598] node 0 link 0: mmio [80000000, fe0bffff]
[    0.093603] bus: [bus 00-ff] on node 0 link 0
[    0.093606] bus: 00 [io  0x0000-0xffff]
[    0.093609] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.093611] bus: 00 [mem 0x80000000-0xfcffffffff]
[    0.093690] ACPI: bus type PCI registered
[    0.093694] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.094818] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.094839] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[    0.094842] PCI: Using configuration type 1 for base access
[    0.096664] bio: create slab <bio-0> at 0
[    0.096923] ACPI: Added _OSI(Module Device)
[    0.096926] ACPI: Added _OSI(Processor Device)
[    0.096928] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.096930] ACPI: Added _OSI(Processor Aggregator Device)
[    0.098872] ACPI: Executed 1 blocks of module-level executable AML code
[    0.099223] ACPI: Actual Package length (266) is larger than NumElements field (2), truncated
[    0.100919] ACPI: Interpreter enabled
[    0.100943] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.100963] ACPI: (supports S0 S1 S3 S4 S5)
[    0.100966] ACPI: Using IOAPIC for interrupt routing
[    0.101008] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.101148] ACPI: No dock devices found.
[    0.106500] ACPI: Power Resource [ISAV] (on)
[    0.109803] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.109815] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.109822] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.109942] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.109946] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.109950] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.109953] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xff7bffff] (ignored)
[    0.109957] PCI: root bus 00: hardware-probed resources
[    0.109965] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.110126] PCI host bridge to bus 0000:00
[    0.110131] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.110135] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.110139] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.110142] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[    0.110164] pci 0000:00:00.0: [10de:00e1] type 00 class 0x060000
[    0.110177] pci 0000:00:00.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[    0.110301] pci 0000:00:01.0: [10de:00e0] type 00 class 0x060100
[    0.110388] pci 0000:00:01.1: [10de:00e4] type 00 class 0x0c0500
[    0.110397] pci 0000:00:01.1: reg 0x10: [io  0x5080-0x509f]
[    0.110411] pci 0000:00:01.1: reg 0x20: [io  0x5000-0x503f]
[    0.110417] pci 0000:00:01.1: reg 0x24: [io  0x5040-0x507f]
[    0.110434] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.110515] pci 0000:00:02.0: [10de:00e7] type 00 class 0x0c0310
[    0.110524] pci 0000:00:02.0: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[    0.110552] pci 0000:00:02.0: supports D1 D2
[    0.110556] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110600] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.110650] pci 0000:00:02.1: [10de:00e7] type 00 class 0x0c0310
[    0.110659] pci 0000:00:02.1: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[    0.110687] pci 0000:00:02.1: supports D1 D2
[    0.110690] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110725] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.110767] pci 0000:00:02.2: [10de:00e8] type 00 class 0x0c0320
[    0.110778] pci 0000:00:02.2: reg 0x10: [mem 0xfebffc00-0xfebffcff]
[    0.110812] pci 0000:00:02.2: supports D1 D2
[    0.110815] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110868] pci 0000:00:02.2: System wakeup disabled by ACPI
[    0.110922] pci 0000:00:05.0: [10de:00df] type 00 class 0x068000
[    0.110932] pci 0000:00:05.0: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[    0.110938] pci 0000:00:05.0: reg 0x14: [io  0xec00-0xec07]
[    0.110963] pci 0000:00:05.0: supports D1 D2
[    0.110967] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111001] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.111049] pci 0000:00:06.0: [10de:00ea] type 00 class 0x040100
[    0.111058] pci 0000:00:06.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.111064] pci 0000:00:06.0: reg 0x14: [io  0xe400-0xe47f]
[    0.111070] pci 0000:00:06.0: reg 0x18: [mem 0xfebfb000-0xfebfbfff]
[    0.111093] pci 0000:00:06.0: supports D1 D2
[    0.111157] pci 0000:00:08.0: [10de:00e5] type 00 class 0x01018a
[    0.111176] pci 0000:00:08.0: reg 0x20: [io  0xffa0-0xffaf]
[    0.111263] pci 0000:00:0a.0: [10de:00e3] type 00 class 0x010185
[    0.111273] pci 0000:00:0a.0: reg 0x10: [io  0x09f0-0x09f7]
[    0.111279] pci 0000:00:0a.0: reg 0x14: [io  0x0bf0-0x0bf3]
[    0.111285] pci 0000:00:0a.0: reg 0x18: [io  0x0970-0x0977]
[    0.111290] pci 0000:00:0a.0: reg 0x1c: [io  0x0b70-0x0b73]
[    0.111296] pci 0000:00:0a.0: reg 0x20: [io  0xc800-0xc80f]
[    0.111302] pci 0000:00:0a.0: reg 0x24: [io  0xc400-0xc47f]
[    0.111378] pci 0000:00:0b.0: [10de:00e2] type 01 class 0x060400
[    0.111468] pci 0000:00:0e.0: [10de:00ed] type 01 class 0x060400
[    0.111512] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.111560] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.111645] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.111714] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.111790] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.111905] pci 0000:01:00.0: [10de:02e1] type 00 class 0x030000
[    0.111925] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.111937] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff pref]
[    0.111948] pci 0000:01:00.0: reg 0x18: [mem 0xfc000000-0xfcffffff]
[    0.111982] pci 0000:01:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref]
[    0.112081] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.112088] pci 0000:00:0b.0:   bridge window [mem 0xfa900000-0xfe9fffff]
[    0.112093] pci 0000:00:0b.0:   bridge window [mem 0xca800000-0xea7fffff pref]
[    0.112136] pci 0000:02:07.0: [1814:0301] type 00 class 0x028000
[    0.112150] pci 0000:02:07.0: reg 0x10: [mem 0xfeaf8000-0xfeafffff]
[    0.112254] pci 0000:00:0e.0: PCI bridge to [bus 02]
[    0.112259] pci 0000:00:0e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.112268] pci_bus 0000:00: on NUMA node 0
[    0.113153] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.113254] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
[    0.113352] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.113450] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.113548] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
[    0.113653] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *3
[    0.113752] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
[    0.113846] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
[    0.113939] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *9
[    0.114033] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *10
[    0.114127] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
[    0.114221] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
[    0.114315] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
[    0.114418] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
[    0.114532] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
[    0.114625] ACPI: \_SB_.PCI0: notify handler is installed
[    0.114663] Found 1 acpi root devices
[    0.114907] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.114910] vgaarb: loaded
[    0.114912] vgaarb: bridge control possible 0000:01:00.0
[    0.115343] SCSI subsystem initialized
[    0.115482] libata version 3.00 loaded.
[    0.115524] ACPI: bus type USB registered
[    0.115580] usbcore: registered new interface driver usbfs
[    0.115596] usbcore: registered new interface driver hub
[    0.115635] usbcore: registered new device driver usb
[    0.115847] PCI: Using ACPI for IRQ routing
[    0.115854] PCI: pci_cache_line_size set to 64 bytes
[    0.115897] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.115902] e820: reserve RAM buffer [mem 0x7ffc0000-0x7fffffff]
[    0.116096] NetLabel: Initializing
[    0.116098] NetLabel:  domain hash size = 128
[    0.116100] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.116128] NetLabel:  unlabeled traffic allowed by default
[    0.116310] Switched to clocksource refined-jiffies
[    0.128905] AppArmor: AppArmor Filesystem Enabled
[    0.128994] pnp: PnP ACPI init
[    0.129025] ACPI: bus type PNP registered
[    0.129124] pnp 00:00: [dma 4]
[    0.129171] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.129240] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.129277] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.129315] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.129729] pnp 00:04: [dma 2]
[    0.129806] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.130087] pnp 00:05: [dma 3]
[    0.130251] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.130543] pnp 00:06: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.130812] system 00:07: [io  0x0190-0x0193] has been reserved
[    0.130817] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.130822] system 00:07: [io  0x4000-0x40ff window] has been reserved
[    0.130826] system 00:07: [io  0x4400-0x44ff window] has been reserved
[    0.130830] system 00:07: [io  0x4800-0x48ff window] has been reserved
[    0.130836] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.130948] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.130953] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.130957] system 00:08: [mem 0xff780000-0xff7bffff] has been reserved
[    0.130961] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.131029] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.131203] system 00:0a: [io  0x0480-0x0487] has been reserved
[    0.131208] system 00:0a: [io  0x0d00-0x0d07] has been reserved
[    0.131212] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.131460] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.131738] pnp 00:0c: [dma 0 disabled]
[    0.131811] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.132071] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.132076] system 00:0d: [mem 0x000c0000-0x000dffff] could not be reserved
[    0.132080] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.132084] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.132089] system 00:0d: [mem 0xff7c0000-0xffffffff] has been reserved
[    0.132093] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.132374] pnp: PnP ACPI: found 14 devices
[    0.132376] ACPI: bus type PNP unregistered
[    0.132381] PnPBIOS: Disabled by ACPI PNP
[    0.169252] Switched to clocksource acpi_pm
[    0.169284] pci 0000:00:0b.0: PCI bridge to [bus 01]
[    0.169294] pci 0000:00:0b.0:   bridge window [mem 0xfa900000-0xfe9fffff]
[    0.169299] pci 0000:00:0b.0:   bridge window [mem 0xca800000-0xea7fffff pref]
[    0.169306] pci 0000:00:0e.0: PCI bridge to [bus 02]
[    0.169311] pci 0000:00:0e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.169318] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.169321] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.169325] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
[    0.169329] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfe9fffff]
[    0.169332] pci_bus 0000:01: resource 2 [mem 0xca800000-0xea7fffff pref]
[    0.169336] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.169408] NET: Registered protocol family 2
[    0.169769] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.170002] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.170148] TCP: Hash tables configured (established 8192 bind 8192)
[    0.170302] TCP: reno registered
[    0.170306] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.170344] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.170470] NET: Registered protocol family 1
[    0.170811] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[    0.252244] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[    0.324245] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[    0.324357] pci 0000:01:00.0: Boot video device
[    0.324364] PCI: CLS 32 bytes, default 64
[    0.324487] Trying to unpack rootfs image as initramfs...
[    0.922659] Freeing initrd memory: 18176K (f5c70000 - f6e30000)
[    0.922995] microcode: AMD CPU family 0xf not supported
[    0.922999] Scanning for low memory corruption every 60 seconds
[    0.923554] Initialise system trusted keyring
[    0.923647] audit: initializing netlink socket (disabled)
[    0.923680] type=2000 audit(1400150117.919:1): initialized
[    0.955851] bounce pool size: 64 pages
[    0.955871] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.957830] VFS: Disk quotas dquot_6.5.2
[    0.957905] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.958625] fuse init (API version 7.22)
[    0.958733] msgmni has been set to 1718
[    0.958849] Key type big_key registered
[    0.959286] Key type asymmetric registered
[    0.959290] Asymmetric key parser 'x509' registered
[    0.959343] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.959386] io scheduler noop registered
[    0.959389] io scheduler deadline registered (default)
[    0.959430] io scheduler cfq registered
[    0.959664] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.959692] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.959784] ipmi message handler version 39.2
[    0.959929] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.959941] ACPI: Power Button [PWRB]
[    0.960072] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.960075] ACPI: Power Button [PWRF]
[    0.960228] GHES: HEST is not enabled!
[    0.960405] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.980849] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.980908] isapnp: Scanning for PnP cards...
[    1.075203] Linux agpgart interface v0.103
[    1.075241] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
[    1.075249] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[    1.075257] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[    1.125748] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[    1.127625] brd: module loaded
[    1.128590] loop: module loaded
[    1.129372] libphy: Fixed MDIO Bus: probed
[    1.129555] tun: Universal TUN/TAP device driver, 1.6
[    1.129557] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.129617] PPP generic driver version 2.4.2
[    1.129681] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.129687] ehci-pci: EHCI PCI platform driver
[    1.129914] ehci-pci 0000:00:02.2: EHCI Host Controller
[    1.129926] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
[    1.129942] ehci-pci 0000:00:02.2: debug port 1
[    1.130004] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
[    1.130042] ehci-pci 0000:00:02.2: irq 20, io mem 0xfebffc00
[    1.173604] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    1.173720] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.173724] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.173728] usb usb1: Product: EHCI Host Controller
[    1.173731] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    1.173734] usb usb1: SerialNumber: 0000:00:02.2
[    1.173895] hub 1-0:1.0: USB hub found
[    1.173910] hub 1-0:1.0: 8 ports detected
[    1.174194] ehci-platform: EHCI generic platform driver
[    1.174210] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.174212] ohci-pci: OHCI PCI platform driver
[    1.174298] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.174306] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.174342] ohci-pci 0000:00:02.0: irq 22, io mem 0xfebfd000
[    1.263320] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.263324] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.263327] usb usb2: Product: OHCI PCI host controller
[    1.263330] usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.263334] usb usb2: SerialNumber: 0000:00:02.0
[    1.263452] hub 2-0:1.0: USB hub found
[    1.263462] hub 2-0:1.0: 4 ports detected
[    1.263660] ohci-pci 0000:00:02.1: OHCI PCI host controller
[    1.263667] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 3
[    1.263705] ohci-pci 0000:00:02.1: irq 21, io mem 0xfebfe000
[    1.350699] isapnp: No Plug & Play device found
[    1.352766] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.352769] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.352773] usb usb3: Product: OHCI PCI host controller
[    1.352776] usb usb3: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.352779] usb usb3: SerialNumber: 0000:00:02.1
[    1.352902] hub 3-0:1.0: USB hub found
[    1.352911] hub 3-0:1.0: 4 ports detected
[    1.353045] ohci-platform: OHCI generic platform driver
[    1.353067] uhci_hcd: USB Universal Host Controller Interface driver
[    1.353189] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.353192] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.354043] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.354177] mousedev: PS/2 mouse device common for all mice
[    1.354370] rtc_cmos 00:01: RTC can wake from S4
[    1.354528] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.354556] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
[    1.354664] device-mapper: uevent: version 1.0.3
[    1.354744] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.354768] platform eisa.0: Probing EISA bus 0
[    1.354775] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.354779] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.354783] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.354786] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.354790] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.354793] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.354797] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.354801] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.354804] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.354808] platform eisa.0: EISA: Detected 0 cards
[    1.354821] cpufreq-nforce2: No nForce2 chipset.
[    1.354827] ledtrig-cpu: registered to indicate activity on CPUs
[    1.355058] TCP: cubic registered
[    1.355220] NET: Registered protocol family 10
[    1.355565] NET: Registered protocol family 17
[    1.355586] Key type dns_resolver registered
[    1.355761] Using IPI No-Shortcut mode
[    1.355867] Loading compiled-in X.509 certificates
[    1.360828] Loaded X.509 cert 'Magrathea: Glacier signing key: 5682f337b8a0a17eef58c6ac5e9a85712c9208df'
[    1.360874] registered taskstats version 1
[    1.365422] Key type trusted registered
[    1.369065] Key type encrypted registered
[    1.372806] AppArmor: AppArmor sha1 policy hashing enabled
[    1.372817] IMA: No TPM chip found, activating TPM-bypass!
[    1.373083] regulator-dummy: disabling
[    1.373149]   Magic number: 14:209:578
[    1.373225] platform pcspkr: hash matches
[    1.373343] rtc_cmos 00:01: setting system clock to 2014-05-15 10:35:19 UTC (1400150119)
[    1.373551] powernow-k8: fid 0xa (1800 MHz), vid 0x2
[    1.373554] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[    1.373601] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 2800+ (1 cpu cores) (version 2.20.00)
[    1.373613] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.373615] EDD information not available.
[    1.373664] PM: Hibernation image not present or could not be loaded.
[    1.375168] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
[    1.375243] Write protecting the kernel text: 6512k
[    1.375329] Write protecting the kernel read-only data: 2756k
[    1.375331] NX-protecting the kernel data: 5776k
[    1.382437] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.404430] systemd-udevd[88]: starting version 204
[    1.509046] pata_amd 0000:00:08.0: version 0.4.1
[    1.517154] scsi0 : pata_amd
[    1.518371] Floppy drive(s): fd0 is 1.44M
[    1.520229] scsi1 : pata_amd
[    1.520313] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.520317] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.525251] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.525581] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22
[    1.535928] FDC 0 is a post-1991 82077
[    1.684599] ata1.00: ATAPI: SONY CDU4811, PY0A, max UDMA/33, CDB intr
[    1.684613] ata1.01: ATAPI: ASUS    DRW-1814BL, 1.10, max UDMA/66
[    1.684626] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c50000) ACPI=0x701f (60:30:0x1f)
[    1.684632] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc0c50000) ACPI=0x1f01f (60:30:0x1f)
[    1.692313] ata1.00: configured for UDMA/33
[    1.708187] ata1.01: configured for UDMA/66
[    1.709311] scsi 0:0:0:0: CD-ROM            SONY     CDU4811          PY0A PQ: 0 ANSI: 5
[    1.710750] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    1.710755] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.710917] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.711136] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.711735] scsi 0:0:1:0: CD-ROM            ASUS     DRW-1814BL       1.10 PQ: 0 ANSI: 5
[    1.714119] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.714263] sr 0:0:1:0: Attached scsi CD-ROM sr1
[    1.714349] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.920038] tsc: Refined TSC clocksource calibration: 1808.801 MHz
[    1.940039] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    2.048614] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x90c3 @ 1, addr 00:11:d8:65:ba:39
[    2.048619] forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
[    2.048961] sata_nv 0000:00:0a.0: version 3.5
[    2.049297] ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 21
[    2.049300] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
[    2.051292] scsi2 : sata_nv
[    2.051468] scsi3 : sata_nv
[    2.051527] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 21
[    2.051531] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 21
[    2.154740] usb 3-1: New USB device found, idVendor=045e, idProduct=0083
[    2.154750] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.154753] usb 3-1: Product: Basic Optical Mouse
[    2.154757] usb 3-1: Manufacturer: Microsoft
[    2.170497] hidraw: raw HID events driver (C) Jiri Kosina
[    2.185632] usbcore: registered new interface driver usbhid
[    2.185641] usbhid: USB HID core driver
[    2.193090] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0/input/input3
[    2.194245] hid-generic 0003:045E:0083.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.1-1/input0
[    2.520045] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.556290] ata3.00: ATA-7: ST3160812AS, 2AAA, max UDMA/133
[    2.556295] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.631239] ata3.00: configured for UDMA/133
[    2.631467] scsi 2:0:0:0: Direct-Access     ATA      ST3160812AS      2AAA PQ: 0 ANSI: 5
[    2.631763] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.631839] sd 2:0:0:0: [sda] Write Protect is off
[    2.631844] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.631876] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.632323] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.705395]  sda: sda1 sda2 < sda5 sda6 > sda3
[    2.705937] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.920118] Switched to clocksource tsc
[    2.944026] ata4: SATA link down (SStatus 0 SControl 300)
[    3.569114] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[    3.569124] EXT4-fs (sda3): write access will be enabled during recovery
[    8.284662] EXT4-fs (sda3): orphan cleanup on readonly fs
[    8.285147] EXT4-fs (sda3): 9 orphan inodes deleted
[    8.285150] EXT4-fs (sda3): recovery complete
[    8.316392] random: nonblocking pool is initialized
[    8.345419] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   18.979003] Adding 4101556k swap on /dev/sda6.  Priority:-1 extents:1 across:4101556k FS
[   19.157012] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.511075] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   19.582949] systemd-udevd[275]: starting version 204
[   19.882722] lp: driver loaded but no devices found
[   19.926869] ppdev: user-space parallel port driver
[   19.963379] parport_pc 00:05: reported by Plug and Play ACPI
[   19.963452] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   20.064469] lp0: using parport0 (interrupt-driven).
[   20.576093] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 903kHz
[   20.674823] ACPI Warning: 0x00005000-0x0000503f SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMRG 1 (20131115/utaddress-251)
[   20.674844] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.675402] i2c i2c-0: nForce2 SMBus adapter at 0x5040
[   21.282223] Bluetooth: Core ver 2.17
[   21.285414] NET: Registered protocol family 31
[   21.285424] Bluetooth: HCI device and connection manager initialized
[   21.285447] Bluetooth: HCI socket layer initialized
[   21.285452] Bluetooth: L2CAP socket layer initialized
[   21.285476] Bluetooth: SCO socket layer initialized
[   21.343068] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.343078] Bluetooth: BNEP filters: protocol multicast
[   21.343099] Bluetooth: BNEP socket layer initialized
[   21.383355] Bluetooth: RFCOMM TTY layer initialized
[   21.383386] Bluetooth: RFCOMM socket layer initialized
[   21.383399] Bluetooth: RFCOMM ver 1.11
[   21.538186] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   21.551366] type=1400 audit(1400106939.670:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=465 comm="apparmor_parser"
[   21.551386] type=1400 audit(1400106939.670:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=465 comm="apparmor_parser"
[   21.554286] type=1400 audit(1400106939.674:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=465 comm="apparmor_parser"
[   21.727817] type=1400 audit(1400106939.846:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=480 comm="apparmor_parser"
[   21.727840] type=1400 audit(1400106939.846:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser"
[   21.727847] type=1400 audit(1400106939.846:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser"
[   21.742210] type=1400 audit(1400106939.862:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser"
[   21.742234] type=1400 audit(1400106939.862:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser"
[   21.742658] type=1400 audit(1400106939.862:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser"
[   21.950651] init: cups main process (471) killed by HUP signal
[   21.950675] init: cups main process ended, respawning
[   21.952266] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.070951] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   22.247257] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   22.505539] cfg80211: Calling CRDA to update world regulatory domain
[   22.506298] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
[   22.919372] nvidia: module license 'NVIDIA' taints kernel.
[   22.919385] Disabling lock debugging due to kernel taint
[   23.018721] intel8x0_measure_ac97_clock: measured 110762 usecs (5376 samples)
[   23.018733] intel8x0: clocking to 47469
[   23.258461] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[   23.283360] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
[   23.342382] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   23.449292] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[   23.687810] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 18
[   23.687879] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   23.767905] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.117  Tue Nov 26 21:36:39 PST 2013
[   24.145704] init: failsafe main process (620) killed by TERM signal
[   24.687167] cfg80211: World regulatory domain updated:
[   24.687181] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.687185] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.687188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.687190] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.687193] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.687195] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.393985] type=1400 audit(1400106943.514:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=786 comm="apparmor_parser"
[   25.573144] forcedeth 0000:00:05.0 eth0: no link during initialization
[   25.577828] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.581252] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.617435] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'
[   25.642123] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8
[   25.680185] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.680806] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.852297] init: udev-fallback-graphics main process (796) terminated with status 1
[   27.978270] wlan0: authenticate with 98:fc:11:9d:64:93
[   27.992211] wlan0: send auth to 98:fc:11:9d:64:93 (try 1/3)
[   27.993784] wlan0: authenticated
[   27.996362] wlan0: associate with 98:fc:11:9d:64:93 (try 1/3)
[   27.999466] wlan0: RX AssocResp from 98:fc:11:9d:64:93 (capab=0x411 status=0 aid=3)
[   27.999779] wlan0: associated
[   28.000261] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   28.282003] wlan0: deauthenticating from 98:fc:11:9d:64:93 by local choice (reason=2)
[   28.296433] wlan0: authenticate with 98:fc:11:9d:64:93
[   28.296568] wlan0: send auth to 98:fc:11:9d:64:93 (try 1/3)
[   28.298166] wlan0: authenticated
[   28.298920] cfg80211: Calling CRDA to update world regulatory domain
[   28.304113] wlan0: associate with 98:fc:11:9d:64:93 (try 1/3)
[   28.306653] wlan0: RX AssocResp from 98:fc:11:9d:64:93 (capab=0x411 status=0 aid=3)
[   28.306961] wlan0: associated
[   28.319282] cfg80211: World regulatory domain updated:
[   28.319294] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   28.319297] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.319300] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.319303] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.319305] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.319308] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)