Results 1 to 9 of 9

Thread: Rsync Stalling on a specific file

Threaded View

  1. #1
    Join Date
    May 2013
    Beans
    20

    Rsync Stalling on a specific file

    Hello everyone, I'm having an issue with rsync when I try to backup a directory on one of my NASes to an external USB drive.

    What happens is that it gets to a specific file and just stalls. After a while I can't even ctrl-c the process and even kill 9 doesn't stop rsync.

    I originally thought that the file might be corrupt or something else was going on with it, but I did the following without any errors:
    • Renamed the file
    • Viewed the file (it's an image)
    • Copy/pasted the file
    • Deleted the file and pasted on my own hard drive


    If there was something wrong with the file I would have expected viewing it or moving it would have caused an error somewhere but they didn't.

    My current status is that I've removed that file and I'm running the rsync command again to see if there's anything else causing issues. So far there hasn't been.

    Once the current rsync is done I was planning on adding the file again and seeing what will happen and eventually I'll want to have this in a cron job.

    Edit: It just finished with this error:

    I haven't had a chance to google for it yet but I will be, just adding it here in case it's important info.

    Code:
    total size is 38522060182  speedup is 1.60
    rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1070) [sender=3.0.9]
    I readded the file and ran the command again only to get this output:

    Code:
    sending incremental file list
    Hard Drive - Reoverred Data/Pictures/08-August - Science Camp/
    Hard Drive - Reoverred Data/Pictures/08-August - Science Camp/08-August - Science Camp 019a.jpg
           32768   1%    0.00kB/s    0:00:00  ^C
    rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(549) [sender=3.0.9]
    The NAS is a DNS-323 running the alt-f firmware. There are two 1TB disks inside running in raid 0.

    This is the rsync command that I run:

    Code:
    sudo rsync -av --progress --delete /backup/DNS-323-backup/John/ /media/USB/backup/John
    My /etc/fstab/

    Code:
    # NAS Shares//192.168.0.102/media   /media/READYNAS/        cifs uid=1500,gid=1005,credentials=/etc/smbcredentials,iocharset=utf8,noserverino,sec=ntlm 0 0
    //192.168.0.102/media2  /media/READYNAS2/       cifs uid=1500,gid=1005,credentials=/etc/smbcredentials,iocharset=utf8,noserverino,sec=ntlm 0 0
    //192.168.0.100/media   /media/DNS-323/         cifs uid=1500,gid=1005,credentials=/etc/smbcredentials,iocharset=utf8,noserverino,sec=ntlm 0 0
    
    
    # NAS Backups
    //192.168.0.100/backup   /backup/DNS-323-backup/         cifs uid=34,gid=34,credentials=/etc/smbcredentials,iocharset=utf8,noserverino,sec=ntlm 0 0
    The entry from /var/log/error
    /var/log/rsync only has entries a month old, nothing current

    Code:
    Feb 25 10:54:14 Ubuntu kernel: [87178.121262] CIFS VFS: SMB response too short (29 bytes)
    The smb.conf file on the DNS-323:

    Code:
    [global]
            workgroup = JOHN
            server string = DNS-323 NAS
            map to guest = Bad User
            passdb backend = smbpasswd
            username map = /etc/samba/smbusers
            syslog only = Yes
            max log size = 32
            enable core files = No
            socket options = IPTOS_LOWDELAY TCP_NODELAY
            hosts allow = 127. 192.168.0.0/255.255.255.0
            print command = lpr -P %p %s; rm %s
    
    
    [Keys]
            comment = Cryptography Keys
            path = /mnt/md0/John/Keys
            valid users = john
            available = yes
            read only = yes
    
    
    [John]
            comment = John Files
            path = /mnt/md0/John
            valid users = +users
            available = yes
            read only = no
    
    
    [Chantelle]
            comment = Chantelle Files
            path = /mnt/md0/Chantelle
            valid users = +users
            available = yes
            read only = no
    
    
    [Volume_1]
            comment = Volume_1 folder
            path = /mnt/md0
            valid users = +users
            available = yes
            read only = no
    
    
    [Shared Docs]
            comment = Shared Docs folder
            path = /mnt/md0/Shared Docs
            valid users = +users
            available = yes
            read only = no
    
    
    [media]
            comment = Media Server folder
            path = /mnt/md0/Shared Docs/Media Server
            valid users = +media
            available = yes
            read only = no
    
    
    [backup]
            comment = Read Only Backup Share
            path = /mnt/md0
            valid users = +backup
            available = yes
            read only = yes
    SMART data from the NAS drives:
    I know it says there are known issues with the drives, that's part of the reason why I am rsyncing the data to have a backup so I can try to update the drive firmware.

    Code:
    smartctl 6.0 2012-10-10 r3643 [armv5tel-linux-2.6.35.14] (local build)Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
    
    
    === START OF INFORMATION SECTION ===
    Model Family:     Seagate Barracuda 7200.11
    Device Model:     ST31000333AS
    Serial Number:    6TE07KB4
    LU WWN Device Id: 5 000c50 00e3c0a34
    Firmware Version: SD35
    User Capacity:    1,000,204,886,016 bytes [1.00 TB]
    Sector Size:      512 bytes logical/physical
    Rotation Rate:    7200 rpm
    Device is:        In smartctl database [for details use: -P show]
    ATA Version is:   ATA8-ACS T13/1699-D revision 4
    SATA Version is:  SATA 2.6, 3.0 Gb/s
    Local Time is:    Sun Feb 23 15:24:58 2014 MST
    
    
    ==> WARNING: There are known problems with these drives,
    see the following Seagate web pages:
    http://knowledge.seagate.com/articles/en_US/FAQ/207931en
    http://knowledge.seagate.com/articles/en_US/FAQ/207951en
    http://knowledge.seagate.com/articles/en_US/FAQ/207957en
    
    
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    See vendor-specific Attribute list for marginal Attributes.
    
    
    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x000f   100   099   006    Pre-fail  Always       -       199988627
      3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0
      4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1216
      5 Reallocated_Sector_Ct   0x0033   096   096   036    Pre-fail  Always       -       193
      7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       250948825
      9 Power_On_Hours          0x0032   052   052   000    Old_age   Always       -       42268
     10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       1
     12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       61
    184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
    187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
    188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
    189 High_Fly_Writes         0x003a   001   001   000    Old_age   Always       -       190
    190 Airflow_Temperature_Cel 0x0022   055   045   045    Old_age   Always   In_the_past 45 (Min/Max 43/47)
    194 Temperature_Celsius     0x0022   045   055   000    Old_age   Always       -       45 (0 20 0 0 0)
    195 Hardware_ECC_Recovered  0x001a   025   025   000    Old_age   Always       -       199988627
    197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       4
    198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       4
    199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
    
    
    SMART Error Log Version: 1
    No Errors Logged
    
    
    SMART Self-test log structure revision number 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Extended offline    Completed: read failure       90%     42259         9240
    # 2  Short offline       Completed: read failure       90%     42235         9240
    # 3  Short offline       Completed: read failure       90%     42211         9240
    # 4  Short offline       Completed: read failure       90%     42187         9240
    # 5  Short offline       Completed: read failure       90%     42163         9240
    # 6  Short offline       Completed: read failure       90%     42139         9240
    # 7  Short offline       Completed: read failure       90%     42115         9240
    # 8  Extended offline    Completed: read failure       90%     42091         9240
    # 9  Short offline       Completed without error       00%     42067         -
    #10  Short offline       Completed without error       00%     42043         -
    #11  Short offline       Completed: read failure       90%     42019         36640
    #12  Short offline       Completed without error       00%     41995         -
    #13  Short offline       Completed without error       00%     41971         -
    #14  Short offline       Completed without error       00%     41947         -
    #15  Extended offline    Completed without error       00%     41926         -
    #16  Short offline       Completed without error       00%     41899         -
    #17  Short offline       Completed without error       00%     41875         -
    #18  Short offline       Completed without error       00%     41851         -
    #19  Short offline       Completed without error       00%     41827         -
    #20  Short offline       Completed without error       00%     41803         -
    #21  Short offline       Completed without error       00%     41779         -
    
    
    
    
    smartctl 6.0 2012-10-10 r3643 [armv5tel-linux-2.6.35.14] (local build)
    Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
    
    
    === START OF INFORMATION SECTION ===
    Model Family:     Seagate Barracuda 7200.11
    Device Model:     ST31000333AS
    Serial Number:    6TE05CT6
    LU WWN Device Id: 5 000c50 0117207ed
    Firmware Version: SD35
    User Capacity:    1,000,204,886,016 bytes [1.00 TB]
    Sector Size:      512 bytes logical/physical
    Rotation Rate:    7200 rpm
    Device is:        In smartctl database [for details use: -P show]
    ATA Version is:   ATA8-ACS T13/1699-D revision 4
    SATA Version is:  SATA 2.6, 3.0 Gb/s
    Local Time is:    Sun Feb 23 15:26:17 2014 MST
    
    
    ==> WARNING: There are known problems with these drives,
    see the following Seagate web pages:
    http://knowledge.seagate.com/articles/en_US/FAQ/207931en
    http://knowledge.seagate.com/articles/en_US/FAQ/207951en
    http://knowledge.seagate.com/articles/en_US/FAQ/207957en
    
    
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    See vendor-specific Attribute list for marginal Attributes.
    
    
    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       163902185
      3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0
      4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1205
      5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       1
      7 Seek_Error_Rate         0x000f   076   060   030    Pre-fail  Always       -       44196219
      9 Power_On_Hours          0x0032   055   055   000    Old_age   Always       -       40105
     10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       1
     12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       62
    184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
    187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
    188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
    189 High_Fly_Writes         0x003a   005   005   000    Old_age   Always       -       95
    190 Airflow_Temperature_Cel 0x0022   056   045   045    Old_age   Always   In_the_past 44 (Min/Max 42/47)
    194 Temperature_Celsius     0x0022   044   055   000    Old_age   Always       -       44 (0 20 0 0 0)
    195 Hardware_ECC_Recovered  0x001a   027   026   000    Old_age   Always       -       163902185
    197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
    
    
    SMART Error Log Version: 1
    No Errors Logged
    
    
    SMART Self-test log structure revision number 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Extended offline    Completed without error       00%     40099         -
    # 2  Short offline       Completed without error       00%     40072         -
    # 3  Short offline       Completed without error       00%     40048         -
    # 4  Short offline       Completed without error       00%     40024         -
    # 5  Short offline       Completed without error       00%     40000         -
    # 6  Short offline       Completed without error       00%     39976         -
    # 7  Short offline       Completed without error       00%     39952         -
    # 8  Extended offline    Completed without error       00%     39931         -
    # 9  Short offline       Completed without error       00%     39904         -
    #10  Short offline       Completed without error       00%     39880         -
    #11  Short offline       Completed without error       00%     39856         -
    #12  Short offline       Completed without error       00%     39832         -
    #13  Short offline       Completed without error       00%     39808         -
    #14  Short offline       Completed without error       00%     39784         -
    #15  Extended offline    Completed without error       00%     39763         -
    #16  Short offline       Completed without error       00%     39736         -
    #17  Short offline       Completed without error       00%     39712         -
    #18  Short offline       Completed without error       00%     39688         -
    #19  Short offline       Completed without error       00%     39664         -
    #20  Short offline       Completed without error       00%     39640         -
    #21  Short offline       Completed without error       00%     39616         -
    Last edited by Ackis; February 25th, 2014 at 07:33 PM.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •