Hello,
I purchased a Dell Inspiron 3537 based on it being available elsewhere as a preinstalled system -
http://www.ubuntu.com/certification/.../201305-13649/
And the fact that in 10 years of Dell/Linux use at home and work I've never had a problem. Until now. This unit shipped with a Radeon 8670M adapter and it is an absolute disaster area. After 3 days of trying, the best I've been able to get is a login screen - which leads to a dead black screen, occasionally with blinking cursor. None of the online information I have found has been of any use. I'm using standard Ubuntu64 13.10 and the beta driver from AMD (the "blessed" only supports 13.04) -
http://support.amd.com/en-us/downloa...Linux%20x86_64
As far as I can see from running lspci -kvm, the driver has installed successfully -
Code:
Device: 00:00.0
Class: Host bridge
Vendor: Intel Corporation
Device: Haswell-ULT DRAM Controller
SVendor: Dell
SDevice: Device 05ea
Rev: 09
Device: 00:02.0
Class: VGA compatible controller
Vendor: Intel Corporation
Device: Haswell-ULT Integrated Graphics Controller
SVendor: Dell
SDevice: Device 05ea
Rev: 09
Driver: i915
Device: 00:03.0
Class: Audio device
Vendor: Intel Corporation
Device: Device 0a0c
SVendor: Dell
SDevice: Device 05ea
Rev: 09
Driver: snd_hda_intel
Device: 00:14.0
Class: USB controller
Vendor: Intel Corporation
Device: Lynx Point-LP USB xHCI HC
SVendor: Dell
SDevice: Device 05ea
Rev: 04
ProgIf: 30
Driver: xhci_hcd
Device: 00:16.0
Class: Communication controller
Vendor: Intel Corporation
Device: Lynx Point-LP HECI #0
SVendor: Dell
SDevice: Device 05ea
Rev: 04
Driver: mei_me
Device: 00:1b.0
Class: Audio device
Vendor: Intel Corporation
Device: Lynx Point-LP HD Audio Controller
SVendor: Dell
SDevice: Device 05ea
Rev: 04
Driver: snd_hda_intel
Device: 00:1c.0
Class: PCI bridge
Vendor: Intel Corporation
Device: Lynx Point-LP PCI Express Root Port 3
Rev: e4
Driver: pcieport
Device: 00:1c.3
Class: PCI bridge
Vendor: Intel Corporation
Device: Lynx Point-LP PCI Express Root Port 4
Rev: e4
Driver: pcieport
Device: 00:1c.4
Class: PCI bridge
Vendor: Intel Corporation
Device: Lynx Point-LP PCI Express Root Port 5
Rev: e4
Driver: pcieport
Device: 00:1d.0
Class: USB controller
Vendor: Intel Corporation
Device: Lynx Point-LP USB EHCI #1
SVendor: Dell
SDevice: Device 05ea
Rev: 04
ProgIf: 20
Driver: ehci-pci
Device: 00:1f.0
Class: ISA bridge
Vendor: Intel Corporation
Device: Lynx Point-LP LPC Controller
SVendor: Dell
SDevice: Device 05ea
Rev: 04
Driver: lpc_ich
Device: 00:1f.2
Class: SATA controller
Vendor: Intel Corporation
Device: Lynx Point-LP SATA Controller 1 [AHCI mode]
SVendor: Dell
SDevice: Device 05ea
Rev: 04
ProgIf: 01
Driver: ahci
Device: 00:1f.3
Class: SMBus
Vendor: Intel Corporation
Device: Lynx Point-LP SMBus Controller
SVendor: Dell
SDevice: Device 05ea
Rev: 04
Device: 01:00.0
Class: Ethernet controller
Vendor: Realtek Semiconductor Co., Ltd.
Device: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
SVendor: Dell
SDevice: Device 05ea
Rev: 07
Driver: r8169
Device: 02:00.0
Class: Network controller
Vendor: Qualcomm Atheros
Device: QCA9565 / AR9565 Wireless Network Adapter
SVendor: Dell
SDevice: Device 020c
Rev: 01
Driver: ath9k
Device: 03:00.0
Class: Display controller
Vendor: Advanced Micro Devices, Inc. [AMD/ATI]
Device: Sun XT [Radeon HD 8670A/8670M/8690M]
SVendor: Dell
SDevice: Device 05ea
Driver: fglrx_pci
I eventually managed to get it to create an xorg.conf which also identifies the driver, however trying to start X keeps generating the dreaded "Server terminated with error (1)" and no display detected.
Xorg.conf (some have suggested changing the 'device' line. I have tried 'fglrx', 'ati', 'ati_pci', doesn't help) -
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx_pci"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg.1.log -
Code:
[ 1403.791]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 1403.792] X Protocol Version 11, Revision 0
[ 1403.792] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 1403.793] Current Operating System: Linux the-patriarchy 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 x86_64
[ 1403.793] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic.efi.signed root=UUID=9152932a-5ba8-4fec-befc-a23f544c0f6c ro quiet splash vt.handoff=7
[ 1403.794] Build Date: 17 December 2013 10:06:15AM
[ 1403.794] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support)
[ 1403.795] Current version of pixman: 0.30.2
[ 1403.796] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1403.796] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1403.798] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Feb 8 12:03:03 2014
[ 1403.799] (==) Using config file: "/etc/X11/xorg.conf"
[ 1403.800] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1403.800] (==) ServerLayout "aticonfig Layout"
[ 1403.800] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 1403.800] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 1403.800] (**) | |-->Device "aticonfig-Device[0]-0"
[ 1403.800] (==) Automatically adding devices
[ 1403.800] (==) Automatically enabling devices
[ 1403.800] (==) Automatically adding GPU devices
[ 1403.800] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 1403.800] Entry deleted from font path.
[ 1403.800] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 1403.800] Entry deleted from font path.
[ 1403.800] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 1403.800] Entry deleted from font path.
[ 1403.800] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 1403.800] Entry deleted from font path.
[ 1403.800] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 1403.800] Entry deleted from font path.
[ 1403.800] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 1403.800] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 1403.800] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1403.800] (II) Loader magic: 0x7f7b3acf0d20
[ 1403.800] (II) Module ABI versions:
[ 1403.800] X.Org ANSI C Emulation: 0.4
[ 1403.800] X.Org Video Driver: 14.1
[ 1403.800] X.Org XInput driver : 19.1
[ 1403.800] X.Org Server Extension : 7.0
[ 1403.800] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1403.801] (--) PCI:*(0:0:2:0) 8086:0a16:1028:05ea rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64
[ 1403.801] (--) PCI: (0:3:0:0) 1002:6660:1028:05ea rev 0, Mem @ 0xa0000000/268435456, 0xc0500000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 1403.801] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1403.802] Initializing built-in extension Generic Event Extension
[ 1403.803] Initializing built-in extension SHAPE
[ 1403.803] Initializing built-in extension MIT-SHM
[ 1403.804] Initializing built-in extension XInputExtension
[ 1403.804] Initializing built-in extension XTEST
[ 1403.805] Initializing built-in extension BIG-REQUESTS
[ 1403.806] Initializing built-in extension SYNC
[ 1403.806] Initializing built-in extension XKEYBOARD
[ 1403.807] Initializing built-in extension XC-MISC
[ 1403.807] Initializing built-in extension SECURITY
[ 1403.808] Initializing built-in extension XINERAMA
[ 1403.809] Initializing built-in extension XFIXES
[ 1403.809] Initializing built-in extension RENDER
[ 1403.810] Initializing built-in extension RANDR
[ 1403.810] Initializing built-in extension COMPOSITE
[ 1403.811] Initializing built-in extension DAMAGE
[ 1403.811] Initializing built-in extension MIT-SCREEN-SAVER
[ 1403.812] Initializing built-in extension DOUBLE-BUFFER
[ 1403.812] Initializing built-in extension RECORD
[ 1403.813] Initializing built-in extension DPMS
[ 1403.813] Initializing built-in extension X-Resource
[ 1403.814] Initializing built-in extension XVideo
[ 1403.815] Initializing built-in extension XVideo-MotionCompensation
[ 1403.815] Initializing built-in extension SELinux
[ 1403.816] Initializing built-in extension XFree86-VidModeExtension
[ 1403.816] Initializing built-in extension XFree86-DGA
[ 1403.817] Initializing built-in extension XFree86-DRI
[ 1403.817] Initializing built-in extension DRI2
[ 1403.817] (II) "glx" will be loaded by default.
[ 1403.817] (WW) "xmir" is not to be loaded by default. Skipping.
[ 1403.817] (II) LoadModule: "glx"
[ 1403.817] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1403.818] (II) Module glx: vendor="X.Org Foundation"
[ 1403.818] compiled for 1.14.5, module version = 1.0.0
[ 1403.818] ABI class: X.Org Server Extension, version 7.0
[ 1403.818] (==) AIGLX enabled
[ 1403.818] Loading extension GLX
[ 1403.818] (II) LoadModule: "fglrxpci"
[ 1403.818] (WW) Warning, couldn't open module fglrxpci
[ 1403.818] (II) UnloadModule: "fglrxpci"
[ 1403.818] (II) Unloading fglrxpci
[ 1403.818] (EE) Failed to load module "fglrxpci" (module does not exist, 0)
[ 1403.818] (==) Matched intel as autoconfigured driver 0
[ 1403.818] (==) Matched intel as autoconfigured driver 1
[ 1403.818] (==) Matched vesa as autoconfigured driver 2
[ 1403.818] (==) Matched modesetting as autoconfigured driver 3
[ 1403.818] (==) Matched fbdev as autoconfigured driver 4
[ 1403.818] (==) Assigned the driver to the xf86ConfigLayout
[ 1403.818] (II) LoadModule: "intel"
[ 1403.818] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1403.819] (II) Module intel: vendor="X.Org Foundation"
[ 1403.819] compiled for 1.14.5, module version = 2.99.909
[ 1403.819] Module class: X.Org Video Driver
[ 1403.819] ABI class: X.Org Video Driver, version 14.1
[ 1403.819] (II) LoadModule: "vesa"
[ 1403.819] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 1403.819] (II) Module vesa: vendor="X.Org Foundation"
[ 1403.819] compiled for 1.14.1, module version = 2.3.2
[ 1403.819] Module class: X.Org Video Driver
[ 1403.819] ABI class: X.Org Video Driver, version 14.1
[ 1403.819] (II) LoadModule: "modesetting"
[ 1403.819] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1403.819] (II) Module modesetting: vendor="X.Org Foundation"
[ 1403.819] compiled for 1.14.1, module version = 0.8.0
[ 1403.819] Module class: X.Org Video Driver
[ 1403.819] ABI class: X.Org Video Driver, version 14.1
[ 1403.819] (II) LoadModule: "fbdev"
[ 1403.819] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 1403.819] (II) Module fbdev: vendor="X.Org Foundation"
[ 1403.819] compiled for 1.14.1, module version = 0.4.3
[ 1403.819] Module class: X.Org Video Driver
[ 1403.819] ABI class: X.Org Video Driver, version 14.1
[ 1403.819] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1403.819] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 1403.819] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 1403.819] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 1403.819] (II) VESA: driver for VESA chipsets: vesa
[ 1403.819] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1403.819] (II) FBDEV: driver for framebuffer: fbdev
[ 1403.819] (--) using VT number 8
[ 1403.822] (II) intel(G0): SNA compiled: xserver-xorg-video-intel 2:2.99.909+git20140206.823382d2-0ubuntu0sarvatt~saucy (Robert Hooker <sarvatt@ubuntu.com>)
[ 1403.822] (WW) Falling back to old probe method for vesa
[ 1403.823] (WW) Falling back to old probe method for modesetting
[ 1403.823] (WW) Falling back to old probe method for fbdev
[ 1403.823] (II) Loading sub module "fbdevhw"
[ 1403.823] (II) LoadModule: "fbdevhw"
[ 1403.823] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 1403.823] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1403.823] compiled for 1.14.5, module version = 0.0.2
[ 1403.823] ABI class: X.Org Video Driver, version 14.1
[ 1403.823] (EE) Screen 0 deleted because of no matching config section.
[ 1403.823] (II) UnloadModule: "modesetting"
[ 1403.823] (EE) Device(s) detected, but none match those in the config file.
[ 1403.823] (EE)
Fatal server error:
[ 1403.823] (EE) no screens found(EE)
[ 1403.823] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1403.823] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 1403.823] (EE)
[ 1403.829] (EE) Server terminated with error (1). Closing log file.
This is the most disgusting linux experience I have ever had. What am I missing? Has anybody gotten this card to work? Basically, if I don't fix this this weekend, I'm getting a refund for the machine.
Footnote: live cd sessions fail to load with the same problems as the installation. Yes, I have tried 14.04 beta - exactly the same.
Update:
I have found a reliable (as opposed to random) way to get to a login screen. Replace the contents of xorg.conf with just -
Code:
Section "Device"
Identifier "ATI radeon 6870"
Driver "fglrx"
EndSection
as per -
http://wiki.cchtml.com/index.php/Ubu...site.29_STABLE
Login is accepted OK, but then there's a black screen and an uninformative error window that wants to report to Canonical. I have no idea where the error details can be found. Trying to invoke fglxrinfo just gives Error: unable to open display (null). This is the content of the new Xorg log -
Code:
[ 15.543]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 15.543] X Protocol Version 11, Revision 0
[ 15.543] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 15.543] Current Operating System: Linux the-patriarchy 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 x86_64
[ 15.543] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic.efi.signed root=UUID=9152932a-5ba8-4fec-befc-a23f544c0f6c ro quiet splash vt.handoff=7
[ 15.543] Build Date: 17 December 2013 10:06:15AM
[ 15.543] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support)
[ 15.543] Current version of pixman: 0.30.2
[ 15.543] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.543] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.543] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 8 18:20:27 2014
[ 15.555] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.555] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.586] (==) No Layout section. Using the first Screen section.
[ 15.586] (==) No screen section available. Using defaults.
[ 15.586] (**) |-->Screen "Default Screen Section" (0)
[ 15.586] (**) | |-->Monitor "<default monitor>"
[ 15.586] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 15.586] (**) | |-->Device "ATI radeon 6870"
[ 15.586] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.586] (==) Automatically adding devices
[ 15.586] (==) Automatically enabling devices
[ 15.586] (==) Automatically adding GPU devices
[ 15.586] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 15.586] Entry deleted from font path.
[ 15.586] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 15.586] Entry deleted from font path.
[ 15.586] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 15.586] Entry deleted from font path.
[ 15.586] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 15.586] Entry deleted from font path.
[ 15.586] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 15.586] Entry deleted from font path.
[ 15.586] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 15.586] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 15.586] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.586] (II) Loader magic: 0x7f13bf9f3d20
[ 15.586] (II) Module ABI versions:
[ 15.586] X.Org ANSI C Emulation: 0.4
[ 15.586] X.Org Video Driver: 14.1
[ 15.586] X.Org XInput driver : 19.1
[ 15.586] X.Org Server Extension : 7.0
[ 15.586] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15.587] (--) PCI:*(0:0:2:0) 8086:0a16:1028:05ea rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64
[ 15.588] (--) PCI: (0:3:0:0) 1002:6660:1028:05ea rev 0, Mem @ 0xa0000000/268435456, 0xc0500000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 15.588] (II) Open ACPI successful (/var/run/acpid.socket)
[ 15.588] Initializing built-in extension Generic Event Extension
[ 15.588] Initializing built-in extension SHAPE
[ 15.588] Initializing built-in extension MIT-SHM
[ 15.588] Initializing built-in extension XInputExtension
[ 15.588] Initializing built-in extension XTEST
[ 15.588] Initializing built-in extension BIG-REQUESTS
[ 15.588] Initializing built-in extension SYNC
[ 15.588] Initializing built-in extension XKEYBOARD
[ 15.588] Initializing built-in extension XC-MISC
[ 15.588] Initializing built-in extension SECURITY
[ 15.588] Initializing built-in extension XINERAMA
[ 15.588] Initializing built-in extension XFIXES
[ 15.588] Initializing built-in extension RENDER
[ 15.588] Initializing built-in extension RANDR
[ 15.588] Initializing built-in extension COMPOSITE
[ 15.588] Initializing built-in extension DAMAGE
[ 15.588] Initializing built-in extension MIT-SCREEN-SAVER
[ 15.588] Initializing built-in extension DOUBLE-BUFFER
[ 15.588] Initializing built-in extension RECORD
[ 15.588] Initializing built-in extension DPMS
[ 15.588] Initializing built-in extension X-Resource
[ 15.588] Initializing built-in extension XVideo
[ 15.588] Initializing built-in extension XVideo-MotionCompensation
[ 15.588] Initializing built-in extension SELinux
[ 15.588] Initializing built-in extension XFree86-VidModeExtension
[ 15.588] Initializing built-in extension XFree86-DGA
[ 15.588] Initializing built-in extension XFree86-DRI
[ 15.588] Initializing built-in extension DRI2
[ 15.588] (II) "glx" will be loaded by default.
[ 15.588] (WW) "xmir" is not to be loaded by default. Skipping.
[ 15.588] (II) LoadModule: "dri2"
[ 15.588] (II) Module "dri2" already built-in
[ 15.588] (II) LoadModule: "glamoregl"
[ 15.646] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 16.213] (II) Module glamoregl: vendor="X.Org Foundation"
[ 16.213] compiled for 1.14.5, module version = 0.5.1
[ 16.213] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.213] (II) LoadModule: "glx"
[ 16.213] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.213] (II) Module glx: vendor="X.Org Foundation"
[ 16.213] compiled for 1.14.5, module version = 1.0.0
[ 16.213] ABI class: X.Org Server Extension, version 7.0
[ 16.213] (==) AIGLX enabled
[ 16.213] Loading extension GLX
[ 16.213] (II) LoadModule: "fglrx"
[ 16.213] (WW) Warning, couldn't open module fglrx
[ 16.213] (II) UnloadModule: "fglrx"
[ 16.213] (II) Unloading fglrx
[ 16.213] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 16.213] (==) Matched intel as autoconfigured driver 0
[ 16.213] (==) Matched intel as autoconfigured driver 1
[ 16.213] (==) Matched vesa as autoconfigured driver 2
[ 16.213] (==) Matched modesetting as autoconfigured driver 3
[ 16.213] (==) Matched fbdev as autoconfigured driver 4
[ 16.213] (==) Assigned the driver to the xf86ConfigLayout
[ 16.213] (II) LoadModule: "intel"
[ 16.214] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.237] (II) Module intel: vendor="X.Org Foundation"
[ 16.237] compiled for 1.14.5, module version = 2.99.909
[ 16.237] Module class: X.Org Video Driver
[ 16.237] ABI class: X.Org Video Driver, version 14.1
[ 16.237] (II) LoadModule: "vesa"
[ 16.238] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 16.238] (II) Module vesa: vendor="X.Org Foundation"
[ 16.238] compiled for 1.14.1, module version = 2.3.2
[ 16.238] Module class: X.Org Video Driver
[ 16.238] ABI class: X.Org Video Driver, version 14.1
[ 16.238] (II) LoadModule: "modesetting"
[ 16.238] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 16.238] (II) Module modesetting: vendor="X.Org Foundation"
[ 16.238] compiled for 1.14.1, module version = 0.8.0
[ 16.238] Module class: X.Org Video Driver
[ 16.238] ABI class: X.Org Video Driver, version 14.1
[ 16.238] (II) LoadModule: "fbdev"
[ 16.238] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 16.238] (II) Module fbdev: vendor="X.Org Foundation"
[ 16.238] compiled for 1.14.1, module version = 0.4.3
[ 16.238] Module class: X.Org Video Driver
[ 16.238] ABI class: X.Org Video Driver, version 14.1
[ 16.238] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 16.239] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 16.239] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 16.239] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 16.239] (II) VESA: driver for VESA chipsets: vesa
[ 16.239] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 16.239] (II) FBDEV: driver for framebuffer: fbdev
[ 16.239] (++) using VT number 7
[ 16.239] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.909+git20140206.823382d2-0ubuntu0sarvatt~saucy (Robert Hooker <sarvatt@ubuntu.com>)
[ 16.239] (WW) Falling back to old probe method for vesa
[ 16.239] (WW) Falling back to old probe method for modesetting
[ 16.239] (WW) Falling back to old probe method for fbdev
[ 16.239] (II) Loading sub module "fbdevhw"
[ 16.239] (II) LoadModule: "fbdevhw"
[ 16.239] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 16.239] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 16.239] compiled for 1.14.5, module version = 0.0.2
[ 16.239] ABI class: X.Org Video Driver, version 14.1
[ 16.239] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[ 16.239] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 16.239] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 16.239] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 16.239] (==) intel(0): RGB weight 888
[ 16.239] (==) intel(0): Default visual is TrueColor
[ 16.240] (**) intel(0): Framebuffer tiled
[ 16.240] (**) intel(0): Pixmaps tiled
[ 16.240] (**) intel(0): "Tear free" disabled
[ 16.240] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 16.240] (II) intel(0): Output eDP1 has no monitor section
[ 16.240] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 16.240] (II) intel(0): Output DP1 has no monitor section
[ 16.240] (II) intel(0): Output HDMI1 has no monitor section
[ 16.240] (II) intel(0): Output DP2 has no monitor section
[ 16.240] (II) intel(0): Output HDMI2 has no monitor section
[ 16.240] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 16.240] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 16.240] (==) intel(0): DPI set to (96, 96)
[ 16.240] (II) Loading sub module "dri2"
[ 16.240] (II) LoadModule: "dri2"
[ 16.240] (II) Module "dri2" already built-in
[ 16.240] (II) UnloadModule: "vesa"
[ 16.240] (II) Unloading vesa
[ 16.240] (II) UnloadModule: "modesetting"
[ 16.240] (II) Unloading modesetting
[ 16.240] (II) UnloadModule: "fbdev"
[ 16.240] (II) Unloading fbdev
[ 16.240] (II) UnloadSubModule: "fbdevhw"
[ 16.240] (II) Unloading fbdevhw
[ 16.240] (==) Depth 24 pixmap format is 32 bpp
[ 16.261] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 16.261] (==) intel(0): Backing store disabled
[ 16.261] (==) intel(0): Silken mouse enabled
[ 16.261] (II) intel(0): HW Cursor enabled
[ 16.261] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 16.261] (==) intel(0): DPMS enabled
[ 16.261] (II) intel(0): [DRI2] Setup complete
[ 16.261] (II) intel(0): [DRI2] DRI driver: i965
[ 16.261] (II) intel(0): [DRI2] VDPAU driver: i965
[ 16.261] (II) intel(0): direct rendering: DRI2 Enabled
[ 16.261] (==) intel(0): hotplug detection: "enabled"
[ 16.262] (--) RandR disabled
[ 16.265] (II) SELinux: Disabled on system
[ 16.367] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 16.367] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 16.367] (II) AIGLX: enabled GLX_ARB_create_context
[ 16.367] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 16.367] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 16.367] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 16.367] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 16.367] (II) AIGLX: Loaded and initialized i965
[ 16.367] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 16.369] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 16.388] (II) intel(0): Setting screen physical size to 361 x 203
[ 16.403] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 16.417] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 16.417] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.417] (II) LoadModule: "evdev"
[ 16.417] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.427] (II) Module evdev: vendor="X.Org Foundation"
[ 16.427] compiled for 1.14.1, module version = 2.7.3
[ 16.427] Module class: X.Org XInput Driver
[ 16.427] ABI class: X.Org XInput driver, version 19.1
[ 16.427] (II) Using input driver 'evdev' for 'Power Button'
[ 16.427] (**) Power Button: always reports core events
[ 16.427] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 16.427] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.427] (--) evdev: Power Button: Found keys
[ 16.427] (II) evdev: Power Button: Configuring as keyboard
[ 16.427] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 16.427] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.427] (**) Option "xkb_rules" "evdev"
[ 16.427] (**) Option "xkb_model" "pc105"
[ 16.427] (**) Option "xkb_layout" "us"
[ 16.428] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 16.428] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 16.428] (II) Using input driver 'evdev' for 'Video Bus'
[ 16.428] (**) Video Bus: always reports core events
[ 16.428] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 16.428] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 16.428] (--) evdev: Video Bus: Found keys
[ 16.428] (II) evdev: Video Bus: Configuring as keyboard
[ 16.428] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[ 16.428] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 16.428] (**) Option "xkb_rules" "evdev"
[ 16.428] (**) Option "xkb_model" "pc105"
[ 16.428] (**) Option "xkb_layout" "us"
[ 16.428] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 16.428] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.428] (II) Using input driver 'evdev' for 'Power Button'
[ 16.428] (**) Power Button: always reports core events
[ 16.428] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 16.428] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.428] (--) evdev: Power Button: Found keys
[ 16.428] (II) evdev: Power Button: Configuring as keyboard
[ 16.428] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1/event1"
[ 16.428] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 16.428] (**) Option "xkb_rules" "evdev"
[ 16.428] (**) Option "xkb_model" "pc105"
[ 16.428] (**) Option "xkb_layout" "us"
[ 16.429] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 16.429] (II) No input driver specified, ignoring this device.
[ 16.429] (II) This device may have been added with another device file.
[ 16.429] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 16.429] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 16.429] (II) Using input driver 'evdev' for 'Video Bus'
[ 16.429] (**) Video Bus: always reports core events
[ 16.429] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 16.429] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 16.429] (--) evdev: Video Bus: Found keys
[ 16.429] (II) evdev: Video Bus: Configuring as keyboard
[ 16.429] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input7/event7"
[ 16.429] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 16.429] (**) Option "xkb_rules" "evdev"
[ 16.429] (**) Option "xkb_model" "pc105"
[ 16.429] (**) Option "xkb_layout" "us"
[ 16.429] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 16.429] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 16.429] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event10)
[ 16.429] (II) No input driver specified, ignoring this device.
[ 16.429] (II) This device may have been added with another device file.
[ 16.429] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event11)
[ 16.429] (II) No input driver specified, ignoring this device.
[ 16.429] (II) This device may have been added with another device file.
[ 16.430] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event9)
[ 16.430] (II) No input driver specified, ignoring this device.
[ 16.430] (II) This device may have been added with another device file.
[ 16.430] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event12)
[ 16.430] (II) No input driver specified, ignoring this device.
[ 16.430] (II) This device may have been added with another device file.
[ 16.430] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event4)
[ 16.430] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 16.430] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[ 16.430] (**) Laptop_Integrated_Webcam_HD: always reports core events
[ 16.430] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event4"
[ 16.430] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xc45 Product 0x649a
[ 16.430] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[ 16.430] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[ 16.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input4/event4"
[ 16.430] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[ 16.430] (**) Option "xkb_rules" "evdev"
[ 16.430] (**) Option "xkb_model" "pc105"
[ 16.430] (**) Option "xkb_layout" "us"
[ 16.430] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 16.430] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.430] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 16.430] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.430] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 16.430] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 16.430] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 16.430] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 16.430] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 16.430] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 16.430] (**) Option "xkb_rules" "evdev"
[ 16.430] (**) Option "xkb_model" "pc105"
[ 16.430] (**) Option "xkb_layout" "us"
[ 16.431] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 16.431] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 16.431] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 16.431] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 16.431] (II) LoadModule: "synaptics"
[ 16.431] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 16.431] (II) Module synaptics: vendor="X.Org Foundation"
[ 16.431] compiled for 1.14.2, module version = 1.7.1
[ 16.431] Module class: X.Org XInput Driver
[ 16.431] ABI class: X.Org XInput driver, version 19.1
[ 16.431] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 16.431] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.431] (**) Option "Device" "/dev/input/event6"
[ 16.452] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5674 (res 44)
[ 16.452] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4754 (res 68)
[ 16.452] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 16.452] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 16.452] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 16.452] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 16.452] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.452] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.464] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 16.464] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 16.464] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 16.464] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 16.464] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 16.464] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 16.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 16.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 16.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 16.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.464] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 16.464] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 16.466] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 16.466] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 16.466] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 16.466] (**) Dell WMI hotkeys: always reports core events
[ 16.466] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[ 16.466] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 16.466] (--) evdev: Dell WMI hotkeys: Found keys
[ 16.466] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 16.466] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 16.466] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[ 16.466] (**) Option "xkb_rules" "evdev"
[ 16.466] (**) Option "xkb_model" "pc105"
[ 16.466] (**) Option "xkb_layout" "us"
[ 18.963] (II) intel(0): EDID vendor "SDC", prod id 21569
[ 18.963] (II) intel(0): Printing DDC gathered Modelines:
[ 18.963] (II) intel(0): Modeline "1366x768"x0.0 76.30 1366 1430 1478 1606 768 770 775 792 +hsync -vsync (47.5 kHz eP)
[ 18.963] (II) intel(0): Modeline "1366x768"x0.0 50.80 1366 1430 1478 1606 768 770 775 792 +hsync -vsync (31.6 kHz e)
[ 46.201] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 46.757] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 46.771] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 382.260] (II) AIGLX: Suspending AIGLX clients for VT switch
These bits seem important, but are meaningless to me and google isn't helpful either, but seem to point back inability to open a display -
Code:
The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[...]
[ 382.260] (II) AIGLX: Suspending AIGLX clients for VT switch
Also contents of .xsessions-errors -
Code:
Segmentation fault (core dumped)
Script for ibus started at run_im.
Script for auto started at run_im.
Script for default started at run_im.
init: at-spi2-registryd main process ended, respawning
init: at-spi2-registryd main process ended, respawning
init: at-spi2-registryd main process ended, respawning
init: at-spi2-registryd main process ended, respawning
init: at-spi2-registryd main process ended, respawning
init: at-spi2-registryd main process ended, respawning
init: at-spi2-registryd main process ended, respawning
init: at-spi2-registryd main process ended, respawning
init: at-spi2-registryd main process ended, respawning
init: at-spi2-registryd main process ended, respawning
init: at-spi2-registryd respawning too fast, stopped
init: update-notifier-crash (/var/crash/_usr_bin_Xorg.0.crash) main process (1734) terminated with status 1
Xsession: X session started for fnord at Sat Feb 8 23:42:29 EST 2014
localuser:fnord being added to access control list
Script for cjkv started at run_im.
Script for default started at run_im.
Unable to create /home/fnord/.dbus/session-bus
Script for cjkv started at run_im.
Script for default started at run_im.
gnome-session-is-accelerated: GL_MAX_{TEXTURE,RENDERBUFFER}_SIZE is too small.
gnome-session-check-accelerated: Helper exited with code 256
gnome-session-is-accelerated: GL_MAX_{TEXTURE,RENDERBUFFER}_SIZE is too small.
gnome-session-check-accelerated: Helper exited with code 256
** (process:2240): WARNING **: software acceleration check failed: Child process exited with code 1
** (x-session-manager:2240): CRITICAL **: We failed, but the fail whale is dead. Sorry....
Xsession: X session started for fnord at Sat Feb 8 23:50:22 EST 2014
localuser:fnord being added to access control list
Script for cjkv started at run_im.
Script for default started at run_im.
Unable to create /home/fnord/.dbus/session-bus
Script for cjkv started at run_im.
Script for default started at run_im.
gnome-session-is-accelerated: GL_MAX_{TEXTURE,RENDERBUFFER}_SIZE is too small.
gnome-session-check-accelerated: Helper exited with code 256
gnome-session-is-accelerated: GL_MAX_{TEXTURE,RENDERBUFFER}_SIZE is too small.
gnome-session-check-accelerated: Helper exited with code 256
** (process:2338): WARNING **: software acceleration check failed: Child process exited with code 1
** (x-session-manager:2338): CRITICAL **: We failed, but the fail whale is dead. Sorry....
I'm totally lost here and can't believe I am the only one out there that's run into this brick wall.
Bookmarks