Results 1 to 2 of 2

Thread: Virtual Machine running tvheadend "No Input Detected"

  1. #1
    Join Date
    Feb 2014
    Beans
    5

    Virtual Machine running tvheadend "No Input Detected"

    This is my first time posting on here, i had a quick look around and couldn't work out with sub-forum i should put this in, sorry if i have chosen incorrectly...

    I had a ubuntu 12.04.3LTS server running TVHeadEnd, with a RPi as the frontend. Everything was working fine, i then went and brought myself a little Dell Poweredge 1950. I have created a VM of the working server that was running TVHeadEnd, added the USB to the config settings, it gets everything, all the MUX's are there, perfect signal and quality. So i go to set the Pi up, reset all the DVB and PVR databases and its coming up with "TVHeadEnd HTSP: No input detected".
    So after a while of looking around in the server, i came to the Dmesg log, i have added just the end part (everything from the start of the DVB config):
    Code:
    [   13.531334] dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in cold state, will try to load a firmware
    [   13.548551] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
    [   13.821865] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
    [   14.646128] init: failsafe main process (584) killed by TERM signal
    [   15.130773] type=1400 audit(1391719987.659:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=753 comm="apparmor_parser"
    [   15.131423] type=1400 audit(1391719987.663:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=753 comm="apparmor_parser"
    [   15.131645] type=1400 audit(1391719987.663:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=753 comm="apparmor_parser"
    [   15.149650] type=1400 audit(1391719987.679:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=755 comm="apparmor_parser"
    [   18.490533] dib0700: firmware started successfully.
    [   18.993964] dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in warm state.
    [   18.994473] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
    [   18.995615] DVB: registering new adapter (Hauppauge Nova-TD Stick (52009))
    [   19.939357] usb 1-1: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
    [   20.524680] DiB0070: successfully identified
    [   20.524690] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
    [   20.527972] DVB: registering new adapter (Hauppauge Nova-TD Stick (52009))
    [   20.999385] usb 1-1: DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
    [   21.589969] DiB0070: successfully identified
    [   21.626593] Registered IR keymap rc-dib0700-rc5
    [   21.627205] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/rc/rc0/input5
    [   21.627360] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/rc/rc0
    [   21.627872] dvb-usb: schedule remote query interval to 50 msecs.
    [   21.627880] dvb-usb: Hauppauge Nova-TD Stick (52009) successfully initialized and connected.
    [   21.631543] usbcore: registered new interface driver dvb_usb_dib0700
    [   21.715817] init: udev-fallback-graphics main process (1029) terminated with status 1 
    [   21.780130] init: plymouth-splash main process (1038) terminated with status 1
    My initial guess would be it has something to do with the IR Key-map, since i never got any the dmesg showing the IR Key-map on the previous server. But I'm completely lost with the last two logs, not sure what either of those are but whatever they are they have been terminated...
    Last edited by lisati; February 14th, 2014 at 08:51 PM. Reason: Please use the default formatting and [code] & [/code]

  2. #2
    Join Date
    Jun 2007
    Location
    Porirua, New Zealand
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: Virtual Machine running tvheadend "No Input Detected"

    You have had replies in http://ubuntuforums.org/showthread.php?t=2205576

    Thread closed.
    Forum DOs and DON'Ts
    Never assume that information you find using a search engine is up-to-date.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •