Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Black screen in Xubuntu

  1. #1
    Join Date
    Feb 2012
    Beans
    73

    Black screen in Xubuntu

    Hey.


    When opening Xubuntu 13.10 I have a problem withblack screen, followed by the light going a bit up and down (noimage). The problem occurred after using hdmi and an update, don'tknow what cost the problem.


    Does anybody know how to fix this?
    The mashine is a Acer aspire 1 (d 270-26)

  2. #2
    Join Date
    Jan 2009
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Black screen in Xubuntu

    Hi,

    Are you able to reach a console by typing CTRL+ALT+F2?

  3. #3
    Join Date
    Jan 2014
    Beans
    6

    Re: Black screen in Xubuntu

    If you are able to switch to a terminal try resetting the resolution
    Code:
    xfconf-query -c displays -p /Default/Screen_0/Resolution -r

  4. #4
    Join Date
    Feb 2012
    Beans
    73

    Re: Black screen in Xubuntu

    I was able to enter the console (by typing CTRL+ALT+F2?).
    When i type the code:
    Code:
    xfconf-query -c displays -p /Default/Screen_0/Resolution -r
    The system replied: Failed to init libxfconf: Unable to autolaunch a dbus-deamon without a $DISPLAY for X11.

    So the problem is unfortunately still there.

  5. #5
    Join Date
    Jan 2009
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Black screen in Xubuntu

    Maybe getting a look at the Xorg log would be helpful.

    While in the console, run these commands:
    Code:
    sudo apt-get install pastebinit
    sudo cat /var/log/Xorg.0.log | pastebinit -b http://paste.ubuntu.com
    This should put your Xorg log up on the Ubuntu Pastebin, and return a URL to it.

  6. #6
    Join Date
    Feb 2012
    Beans
    73

    Re: Black screen in Xubuntu

    Thanks.

    Well this is what i got: (On this link: http://paste.ubuntu.com/6840805/)

    Code:
    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 [ 22.040] X.Org X Server 1.14.5 Release Date: 2013-12-12 [ 22.040] X Protocol Version 11, Revision 0 [ 22.040] Build Operating System: Linux 3.2.0-54-generic i686 Ubuntu [ 22.040] Current Operating System: Linux diana-AOD270 3.11.0-15-generic #23-Ubuntu SMP Mon Dec 9 18:16:27 UTC 2013 i686 [ 22.040] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=d250db3c-a789-4f1a-a84e-a27b6bd3209e ro quiet splash vt.handoff=7 [ 22.040] Build Date: 17 December 2013 10:03:52AM [ 22.040] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support) [ 22.040] Current version of pixman: 0.30.2 [ 22.040] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 22.041] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 22.041] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 30 00:24:49 2014 [ 22.061] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 22.062] (==) No Layout section. Using the first Screen section. [ 22.062] (==) No screen section available. Using defaults. [ 22.062] (**) |-->Screen "Default Screen Section" (0) [ 22.062] (**) | |-->Monitor "<default monitor>" [ 22.063] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 22.063] (==) Automatically adding devices [ 22.063] (==) Automatically enabling devices [ 22.063] (==) Automatically adding GPU devices [ 22.063] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 22.063] Entry deleted from font path. [ 22.063] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 22.063] Entry deleted from font path. [ 22.064] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 22.064] Entry deleted from font path. [ 22.064] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 22.064] Entry deleted from font path. [ 22.064] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 22.064] Entry deleted from font path. [ 22.064] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 22.064] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 22.064] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 22.064] (II) Loader magic: 0xb77886a0 [ 22.064] (II) Module ABI versions: [ 22.064] X.Org ANSI C Emulation: 0.4 [ 22.064] X.Org Video Driver: 14.1 [ 22.064] X.Org XInput driver : 19.1 [ 22.064] X.Org Server Extension : 7.0 [ 22.065] (II) xfree86: Adding drm device (/dev/dri/card0) [ 22.068] (--) PCI:*(0:0:2:0) 8086:0be1:1025:061f rev 9, Mem @ 0x86000000/1048576, I/O @ 0x000050d0/8 [ 22.068] (II) Open ACPI successful (/var/run/acpid.socket) [ 22.069] Initializing built-in extension Generic Event Extension [ 22.069] Initializing built-in extension SHAPE [ 22.069] Initializing built-in extension MIT-SHM [ 22.069] Initializing built-in extension XInputExtension [ 22.069] Initializing built-in extension XTEST [ 22.069] Initializing built-in extension BIG-REQUESTS [ 22.069] Initializing built-in extension SYNC [ 22.069] Initializing built-in extension XKEYBOARD [ 22.069] Initializing built-in extension XC-MISC [ 22.069] Initializing built-in extension SECURITY [ 22.069] Initializing built-in extension XINERAMA [ 22.069] Initializing built-in extension XFIXES [ 22.069] Initializing built-in extension RENDER [ 22.069] Initializing built-in extension RANDR [ 22.069] Initializing built-in extension COMPOSITE [ 22.069] Initializing built-in extension DAMAGE [ 22.069] Initializing built-in extension MIT-SCREEN-SAVER [ 22.070] Initializing built-in extension DOUBLE-BUFFER [ 22.070] Initializing built-in extension RECORD [ 22.070] Initializing built-in extension DPMS [ 22.070] Initializing built-in extension X-Resource [ 22.070] Initializing built-in extension XVideo [ 22.070] Initializing built-in extension XVideo-MotionCompensation [ 22.070] Initializing built-in extension SELinux [ 22.070] Initializing built-in extension XFree86-VidModeExtension [ 22.070] Initializing built-in extension XFree86-DGA [ 22.070] Initializing built-in extension XFree86-DRI [ 22.070] Initializing built-in extension DRI2 [ 22.070] (II) "glx" will be loaded by default. [ 22.070] (WW) "xmir" is not to be loaded by default. Skipping. [ 22.070] (II) LoadModule: "dri2" [ 22.070] (II) Module "dri2" already built-in [ 22.070] (II) LoadModule: "glamoregl" [ 22.093] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 22.294] (II) Module glamoregl: vendor="X.Org Foundation" [ 22.294] compiled for 1.14.3, module version = 0.5.1 [ 22.294] ABI class: X.Org ANSI C Emulation, version 0.4 [ 22.294] (II) LoadModule: "glx" [ 22.295] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 22.295] (II) Module glx: vendor="X.Org Foundation" [ 22.295] compiled for 1.14.5, module version = 1.0.0 [ 22.296] ABI class: X.Org Server Extension, version 7.0 [ 22.296] (==) AIGLX enabled [ 22.296] Loading extension GLX [ 22.296] (==) Matched vesa as autoconfigured driver 0 [ 22.296] (==) Matched modesetting as autoconfigured driver 1 [ 22.296] (==) Matched fbdev as autoconfigured driver 2 [ 22.296] (==) Assigned the driver to the xf86ConfigLayout [ 22.296] (II) LoadModule: "vesa" [ 22.297] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 22.297] (II) Module vesa: vendor="X.Org Foundation" [ 22.297] compiled for 1.14.1, module version = 2.3.2 [ 22.297] Module class: X.Org Video Driver [ 22.297] ABI class: X.Org Video Driver, version 14.1 [ 22.297] (II) LoadModule: "modesetting" [ 22.298] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 22.298] (II) Module modesetting: vendor="X.Org Foundation" [ 22.298] compiled for 1.14.1, module version = 0.8.0 [ 22.298] Module class: X.Org Video Driver [ 22.298] ABI class: X.Org Video Driver, version 14.1 [ 22.299] (II) LoadModule: "fbdev" [ 22.299] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 22.300] (II) Module fbdev: vendor="X.Org Foundation" [ 22.300] compiled for 1.14.1, module version = 0.4.3 [ 22.300] Module class: X.Org Video Driver [ 22.300] ABI class: X.Org Video Driver, version 14.1 [ 22.300] (II) VESA: driver for VESA chipsets: vesa [ 22.300] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 22.300] (II) FBDEV: driver for framebuffer: fbdev [ 22.300] (++) using VT number 7 [ 22.301] vesa: Ignoring device with a bound kernel driver [ 22.301] (WW) Falling back to old probe method for vesa [ 22.301] (II) modesetting(1): using drv /dev/dri/card0 [ 22.301] (WW) Falling back to old probe method for fbdev [ 22.301] (II) Loading sub module "fbdevhw" [ 22.301] (II) LoadModule: "fbdevhw" [ 22.302] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 22.302] (II) Module fbdevhw: vendor="X.Org Foundation" [ 22.302] compiled for 1.14.5, module version = 0.0.2 [ 22.302] ABI class: X.Org Video Driver, version 14.1 [ 22.302] (EE) Screen 0 deleted because of no matching config section. [ 22.302] (II) UnloadModule: "vesa" [ 22.302] (II) modesetting(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 22.302] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32 [ 22.302] (==) modesetting(0): RGB weight 888 [ 22.303] (==) modesetting(0): Default visual is TrueColor [ 22.303] (II) modesetting(0): ShadowFB: preferred NO, enabled NO [ 22.364] (II) modesetting(0): Output VGA-0 has no monitor section [ 22.428] (II) modesetting(0): Output LVDS-0 has no monitor section [ 22.437] (II) modesetting(0): Output DVI-0 has no monitor section [ 22.438] (II) modesetting(0): Output DisplayPort-0 has no monitor section [ 22.500] (II) modesetting(0): EDID for output VGA-0 [ 22.564] (II) modesetting(0): EDID for output LVDS-0 [ 22.564] (II) modesetting(0): Manufacturer: AUO Model: 60d2 Serial#: 0 [ 22.564] (II) modesetting(0): Year: 2009 Week: 0 [ 22.564] (II) modesetting(0): EDID Version: 1.3 [ 22.564] (II) modesetting(0): Digital Display Input [ 22.564] (II) modesetting(0): Max Image Size [cm]: horiz.: 22 vert.: 13 [ 22.564] (II) modesetting(0): Gamma: 2.20 [ 22.564] (II) modesetting(0): No DPMS capabilities specified [ 22.564] (II) modesetting(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 22.564] (II) modesetting(0): First detailed timing is preferred mode [ 22.564] (II) modesetting(0): redX: 0.590 redY: 0.345 greenX: 0.325 greenY: 0.540 [ 22.564] (II) modesetting(0): blueX: 0.150 blueY: 0.145 whiteX: 0.313 whiteY: 0.329 [ 22.564] (II) modesetting(0): Manufacturer's mask: 0 [ 22.564] (II) modesetting(0): Supported detailed timing: [ 22.564] (II) modesetting(0): clock: 49.8 MHz Image Size: 222 x 125 mm [ 22.564] (II) modesetting(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1338 h_border: 0 [ 22.565] (II) modesetting(0): v_active: 600 v_sync: 602 v_sync_end 608 v_blanking: 620 v_border: 0 [ 22.565] (II) modesetting(0): Unknown vendor-specific block f [ 22.565] (II) modesetting(0): AUO [ 22.565] (II) modesetting(0): B101AW06 V0 [ 22.565] (II) modesetting(0): EDID (in hex): [ 22.565] (II) modesetting(0): 00ffffffffffff0006afd26000000000 [ 22.565] (II) modesetting(0): 0013010380160d780a15859758538a26 [ 22.565] (II) modesetting(0): 25505400000001010101010101010101 [ 22.565] (II) modesetting(0): 0101010101017413003a415814203020 [ 22.565] (II) modesetting(0): 2600de7d000000180000000f00000000 [ 22.565] (II) modesetting(0): 00000000000000000020000000fe0041 [ 22.565] (II) modesetting(0): 554f0a202020202020202020000000fe [ 22.565] (II) modesetting(0): 004231303141573036205630200a002b [ 22.566] (II) modesetting(0): Printing probed modes for output LVDS-0 [ 22.566] (II) modesetting(0): Modeline "1024x600"x60.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP) [ 22.566] (II) modesetting(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) [ 22.566] (II) modesetting(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d) [ 22.566] (II) modesetting(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) [ 22.566] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 22.566] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 22.566] (II) modesetting(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d) [ 22.566] (II) modesetting(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d) [ 22.566] (II) modesetting(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d) [ 22.566] (II) modesetting(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 22.566] (II) modesetting(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 22.566] (II) modesetting(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d) [ 22.566] (II) modesetting(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 22.566] (II) modesetting(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 22.566] (II) modesetting(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d) [ 22.566] (II) modesetting(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d) [ 22.566] (II) modesetting(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d) [ 22.567] (II) modesetting(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 22.567] (II) modesetting(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 22.567] (II) modesetting(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 22.567] (II) modesetting(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 22.576] (II) modesetting(0): EDID for output DVI-0 [ 22.577] (II) modesetting(0): EDID for output DisplayPort-0 [ 22.577] (II) modesetting(0): Output VGA-0 disconnected [ 22.577] (II) modesetting(0): Output LVDS-0 connected [ 22.577] (II) modesetting(0): Output DVI-0 disconnected [ 22.577] (II) modesetting(0): Output DisplayPort-0 disconnected [ 22.577] (II) modesetting(0): Using exact sizes for initial modes [ 22.577] (II) modesetting(0): Output LVDS-0 using initial mode 1024x600 [ 22.577] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 22.577] (==) modesetting(0): DPI set to (96, 96) [ 22.577] (II) Loading sub module "fb" [ 22.577] (II) LoadModule: "fb" [ 22.578] (II) Loading /usr/lib/xorg/modules/libfb.so [ 22.578] (II) Module fb: vendor="X.Org Foundation" [ 22.578] compiled for 1.14.5, module version = 1.0.0 [ 22.578] ABI class: X.Org ANSI C Emulation, version 0.4 [ 22.578] (II) UnloadModule: "fbdev" [ 22.578] (II) Unloading fbdev [ 22.578] (II) UnloadSubModule: "fbdevhw" [ 22.578] (II) Unloading fbdevhw [ 22.579] (==) Depth 24 pixmap format is 32 bpp [ 22.579] (==) modesetting(0): Backing store disabled [ 22.579] (==) modesetting(0): Silken mouse enabled [ 22.579] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 22.580] (==) modesetting(0): DPMS enabled [ 22.667] (--) RandR disabled [ 22.687] (II) SELinux: Disabled on system [ 22.690] (II) AIGLX: Screen 0 is not DRI2 capable [ 22.690] (II) AIGLX: Screen 0 is not DRI capable [ 22.963] (II) AIGLX: Loaded and initialized swrast [ 22.963] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 23.044] (II) modesetting(0): Damage tracking initialized [ 23.044] (II) modesetting(0): Setting screen physical size to 270 x 158 [ 23.074] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 23.083] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 23.083] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 23.083] (II) LoadModule: "evdev" [ 23.084] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 23.100] (II) Module evdev: vendor="X.Org Foundation" [ 23.100] compiled for 1.14.1, module version = 2.7.3 [ 23.100] Module class: X.Org XInput Driver [ 23.100] ABI class: X.Org XInput driver, version 19.1 [ 23.100] (II) Using input driver 'evdev' for 'Power Button' [ 23.100] (**) Power Button: always reports core events [ 23.101] (**) evdev: Power Button: Device: "/dev/input/event3" [ 23.101] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 23.101] (--) evdev: Power Button: Found keys [ 23.101] (II) evdev: Power Button: Configuring as keyboard [ 23.101] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 23.101] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 23.101] (**) Option "xkb_rules" "evdev" [ 23.102] (**) Option "xkb_model" "pc105" [ 23.102] (**) Option "xkb_layout" "dk" [ 23.109] (II) XKB: reuse xkmfile /var/lib/xkb/server-709407198873F5BF4583E7D562E34285659E3DFF.xkm [ 23.111] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 23.111] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 23.111] (II) Using input driver 'evdev' for 'Video Bus' [ 23.111] (**) Video Bus: always reports core events [ 23.111] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 23.111] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 23.111] (--) evdev: Video Bus: Found keys [ 23.111] (II) evdev: Video Bus: Configuring as keyboard [ 23.112] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5" [ 23.112] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 23.112] (**) Option "xkb_rules" "evdev" [ 23.112] (**) Option "xkb_model" "pc105" [ 23.112] (**) Option "xkb_layout" "dk" [ 23.114] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 23.114] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 23.114] (II) Using input driver 'evdev' for 'Power Button' [ 23.114] (**) Power Button: always reports core events [ 23.114] (**) evdev: Power Button: Device: "/dev/input/event0" [ 23.114] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 23.114] (--) evdev: Power Button: Found keys [ 23.114] (II) evdev: Power Button: Configuring as keyboard [ 23.114] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" [ 23.114] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 23.114] (**) Option "xkb_rules" "evdev" [ 23.114] (**) Option "xkb_model" "pc105" [ 23.114] (**) Option "xkb_layout" "dk" [ 23.116] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 23.116] (II) No input driver specified, ignoring this device. [ 23.116] (II) This device may have been added with another device file. [ 23.117] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 23.117] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 23.117] (II) Using input driver 'evdev' for 'Sleep Button' [ 23.117] (**) Sleep Button: always reports core events [ 23.117] (**) evdev: Sleep Button: Device: "/dev/input/event1" [ 23.117] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 23.117] (--) evdev: Sleep Button: Found keys [ 23.117] (II) evdev: Sleep Button: Configuring as keyboard [ 23.117] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1" [ 23.117] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 23.118] (**) Option "xkb_rules" "evdev" [ 23.118] (**) Option "xkb_model" "pc105" [ 23.118] (**) Option "xkb_layout" "dk" [ 23.119] (II) config/udev: Adding drm device (/dev/dri/card0) [ 23.119] (II) config/udev: Ignoring already known drm device (/dev/dri/card0) [ 23.120] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10) [ 23.120] (II) No input driver specified, ignoring this device. [ 23.120] (II) This device may have been added with another device file. [ 23.121] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event11) [ 23.121] (II) No input driver specified, ignoring this device. [ 23.121] (II) This device may have been added with another device file. [ 23.122] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9) [ 23.122] (II) No input driver specified, ignoring this device. [ 23.122] (II) This device may have been added with another device file. [ 23.123] (II) config/udev: Adding input device WebCam (/dev/input/event6) [ 23.123] (**) WebCam: Applying InputClass "evdev keyboard catchall" [ 23.123] (II) Using input driver 'evdev' for 'WebCam' [ 23.123] (**) WebCam: always reports core events [ 23.123] (**) evdev: WebCam: Device: "/dev/input/event6" [ 23.123] (--) evdev: WebCam: Vendor 0x64e Product 0xd214 [ 23.123] (--) evdev: WebCam: Found keys [ 23.123] (II) evdev: WebCam: Configuring as keyboard [ 23.123] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input6/event6" [ 23.123] (II) XINPUT: Adding extended input device "WebCam" (type: KEYBOARD, id 10) [ 23.123] (**) Option "xkb_rules" "evdev" [ 23.123] (**) Option "xkb_model" "pc105" [ 23.123] (**) Option "xkb_layout" "dk" [ 23.125] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) [ 23.125] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 23.125] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 23.125] (**) AT Translated Set 2 keyboard: always reports core events [ 23.125] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4" [ 23.125] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 23.126] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 23.126] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 23.126] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4" [ 23.126] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11) [ 23.126] (**) Option "xkb_rules" "evdev" [ 23.126] (**) Option "xkb_model" "pc105" [ 23.126] (**) Option "xkb_layout" "dk" [ 23.127] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12) [ 23.127] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall" [ 23.128] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall" [ 23.128] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons" [ 23.128] (II) LoadModule: "synaptics" [ 23.128] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 23.129] (II) Module synaptics: vendor="X.Org Foundation" [ 23.129] compiled for 1.14.2, module version = 1.7.1 [ 23.129] Module class: X.Org XInput Driver [ 23.129] ABI class: X.Org XInput driver, version 19.1 [ 23.129] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' [ 23.129] (**) ETPS/2 Elantech Touchpad: always reports core events [ 23.129] (**) Option "Device" "/dev/input/event12" [ 23.196] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2320 (res 0) [ 23.196] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 928 (res 0) [ 23.196] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255 [ 23.197] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15 [ 23.197] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple [ 23.197] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe [ 23.197] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 23.197] (**) ETPS/2 Elantech Touchpad: always reports core events [ 23.248] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event12" [ 23.248] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12) [ 23.248] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 23.249] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75 [ 23.249] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.080 [ 23.249] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1 [ 23.249] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1 [ 23.249] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 [ 23.250] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 [ 23.250] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 23.250] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0) [ 23.251] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates" [ 23.257] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event7) [ 23.257] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 23.257] (II) Using input driver 'evdev' for 'Acer WMI hotkeys' [ 23.257] (**) Acer WMI hotkeys: always reports core events [ 23.257] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event7" [ 23.257] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0 [ 23.257] (--) evdev: Acer WMI hotkeys: Found keys [ 23.257] (II) evdev: Acer WMI hotkeys: Configuring as keyboard [ 23.257] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7" [ 23.258] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 13) [ 23.258] (**) Option "xkb_rules" "evdev" [ 23.258] (**) Option "xkb_model" "pc105" [ 23.258] (**) Option "xkb_layout" "dk" [ 23.259] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event8) [ 23.259] (II) No input driver specified, ignoring this device. [ 23.259] (II) This device may have been added with another device file. [ 23.260] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0) [ 23.260] (II) No input driver specified, ignoring this device. [ 23.260] (II) This device may have been added with another device file. [ 25.856] (II) modesetting(0): EDID vendor "AUO", prod id 24786 [ 25.856] (II) modesetting(0): Printing DDC gathered Modelines: [ 25.856] (II) modesetting(0): Modeline "1024x600"x0.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP) [ 26.230] (II) modesetting(0): Allocate new frame buffer 960x600 stride [ 27.644] (II) modesetting(0): EDID vendor "AUO", prod id 24786 [ 27.644] (II) modesetting(0): Printing DDC gathered Modelines: [ 27.644] (II) modesetting(0): Modeline "1024x600"x0.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP) [ 27.785] (II) modesetting(0): EDID vendor "AUO", prod id 24786 [ 27.785] (II) modesetting(0): Printing DDC gathered Modelines: [ 27.785] (II) modesetting(0): Modeline "1024x600"x0.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP)

  7. #7
    Join Date
    Jan 2009
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Black screen in Xubuntu

    What do you get when you run:
    Code:
    startx
    from the console?

  8. #8
    Join Date
    Feb 2012
    Beans
    73

    Re: Black screen in Xubuntu

    After 5 min, I still have black screen on that command...

  9. #9
    Join Date
    Jan 2009
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Black screen in Xubuntu

    Quote Originally Posted by Hvidemose View Post
    After 5 min, I still have black screen on that command...
    Hmm, did you get any output from it?

  10. #10
    Join Date
    Nov 2013
    Beans
    Hidden!

    Re: Black screen in Xubuntu

    Hello
    You can try this in a console (CTRL+ALT+F1) and become root :
    sudo -i
    1) stop lightdm :
    service lightdm stop
    2) create a xorg.conf :
    Xorg -configure
    3) modifie the xorg.conf.new generated
    nano xorg.conf.new
    4) you keep only the first Section "Device" and you change :
    Driver "xxxx"
    by
    Driver "fglrx"
    you save (CTRL+O) and quit (CTRL+X)
    5) you validate the new xorg.conf
    mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old no trouble if error message
    cp xorg.conf.new /etc/X11/xorg.conf
    6) you restart computer
    reboot
    7) If there is no change, you suppress the file xorg.conf on a console :
    sudo rm /etc/X11/xorg.conf

    Good luck

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •