Results 1 to 2 of 2

Thread: Canon MF3010 - only scanning, Ubuntu 13.10

  1. #1
    Join Date
    Oct 2013
    Beans
    3

    Canon MF3010 - only scanning, Ubuntu 13.10

    Dear all,

    I bought Canon MF3010 printer/scanner. Printing is fine (thanks to the Ubuntu 13.10, 64bit, provided driver); however, the scanning does not work.

    I installed the proper package, sane-backends, xsane and simple-scan own scanning programs.However, none of them is able to detect the new Canon MF3010 scanner.

    The device manufacturer is providing only Linux print support, but Canon (i-SENSYS) MF3010 model is among SANE supported devices.



    Any help, please ?



    Scanner detection says:


    sudo sane-find-scanner


    # sane-find-scanner will now attempt to detect your scanner. If the
    # result is different from what you expected, first make sure your
    # scanner is powered up and properly connected to your computer.


    # No SCSI scanners found. If you expected something different, make sure that
    # you have loaded a kernel SCSI driver for your SCSI adapter.


    found USB scanner (vendor=0x04a9 [Canon Inc], product=0x2759 [MF3010]) at libusb:001:008
    found USB scanner (vendor=0x093a, product=0x2621) at libusb:001:005
    found USB scanner (vendor=0x0cf3 [ATHEROS], product=0x9271 [USB2.0 WLAN]) at libusb:001:002
    could not fetch string descriptor: Pipe error
    could not fetch string descriptor: Pipe error
    # Your USB scanner was (probably) detected. It may or may not be supported by
    # SANE. Try scanimage -L and read the backend's manpage.


    # Not checking for parallel port scanners.


    # Most Scanners connected to the parallel port or other proprietary ports
    # can't be detected by this program.

    scanimage -V
    scanimage (sane-backends) 1.0.25git; backend version 1.0.25


    sudo scanimage -L


    No scanners were identified. If you were expecting something different,
    check that the scanner is plugged in, turned on and detected by the
    sane-find-scanner tool (if appropriate). Please read the documentation
    which came with this software (README, FAQ, manpages).




    Post Tags: Canon MF3010, scanner, Ubuntu 13.10
    Last edited by ilias-utcpd; December 17th, 2013 at 07:35 PM. Reason: extended message

  2. #2
    Join Date
    Oct 2013
    Beans
    3

    Re: Canon MF3010 - only scanning, Ubuntu 13.10

    OK, now I installed also sane-backends-1.0.24.tar.gz and libusb-dev; scanned finding improved, but still, no scanner detected...

    Maybe I should do something around conf-files ?
    ls /etc/sane.d/
    canon_dr.conf dll.d/ fujitsu.conf genesys.conf geniusvp2.conf gt68xx.conf kodakaio.conf saned.conf xerox_mfp.conf



    sudo sane-find-scanner


    # sane-find-scanner will now attempt to detect your scanner. If the
    # result is different from what you expected, first make sure your
    # scanner is powered up and properly connected to your computer.


    # No SCSI scanners found. If you expected something different, make sure that
    # you have loaded a kernel SCSI driver for your SCSI adapter.


    found USB scanner (vendor=0x04a9 [Canon Inc], product=0x2759 [MF3010]) at libusb:001:009
    found USB scanner (vendor=0x093a, product=0x2621) at libusb:001:005
    found USB scanner (vendor=0x0cf3 [ATHEROS], product=0x9271 [USB2.0 WLAN]) at libusb:001:002
    # Your USB scanner was (probably) detected. It may or may not be supported by
    # SANE. Try scanimage -L and read the backend's manpage.


    # Not checking for parallel port scanners.


    # Most Scanners connected to the parallel port or other proprietary ports
    # can't be detected by this program.


    sudo scanimage -L

    No scanners were identified. If you were expecting something different,
    check that the scanner is plugged in, turned on and detected by the
    sane-find-scanner tool (if appropriate). Please read the documentation
    which came with this software (README, FAQ, manpages).
    ----------------------------------------------------------------------------------------------------

    Even after adding myself to the group 'scanner' and loggoff/login I am detecting "No scanners were identified."...
    Last edited by ilias-utcpd; December 17th, 2013 at 08:17 PM. Reason: added new devel

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •