Thank you very much! This seems to have fixed my brother's computer. I also have the same computer as his and was wondering if I would have to do the same commands to fix mine? My info is below. Sorry for the noob questions 8)
Code:
iwconfig
wlan0 IEEE 802.11bgn ESSID:"RubyDeer"
Mode:Managed Frequency:2.412 GHz Access Point: 98:FC:11:3F:9F:A6
Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr=2347 B Fragment thr:off
Power Management:off
Link Quality=67/70 Signal level=-43 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:17 Missed beacon:0
lo no wireless extensions.
eth0 no wireless extensions.
*-network
description: Ethernet interface
product: NetLink BCM57785 Gigabit Ethernet PCIe
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 10
serial: b8:88:e3:5a:3a:16
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 firmware=sb latency=0 link=no multicast=yes port=twisted pair
resources: irq:16 memory:c0430000-c043ffff memory:c0440000-c044ffff memory:c0450000-c04507ff
*-network
description: Wireless interface
product: RTL8188CE 802.11b/g/n WiFi Adapter
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 01
serial: 74:e5:43:70:01:19
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rtl8192ce driverversion=3.5.0-44-generic firmware=N/A ip=192.168.1.148 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
resources: irq:17 ioport:2000(size=256) memory:c0500000-c0503fff
Bookmarks