Good morning, VMC.
If I open nautilus it does not show the flash drive.
When I do fdisk I get the following:
Code:
mark@mark-HP-ProBook-4525s:~$ sudo fdisk -l
[sudo] password for mark:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x5147c726
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 616447 307200 7 HPFS/NTFS/exFAT
/dev/sda2 616448 589488127 294435840 7 HPFS/NTFS/exFAT
/dev/sda3 589490176 620947455 15728640 7 HPFS/NTFS/exFAT
/dev/sda4 620947456 625131519 2092032 c W95 FAT32 (LBA)
Disk /dev/sdb: 2000.4 GB, 2000398933504 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00063e80
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 7813119 3905536 83 Linux
/dev/sdb2 7813120 300781567 146484224 83 Linux
/dev/sdb3 300781568 316405759 7812096 82 Linux swap / Solaris
Disk /dev/sdc: 8004 MB, 8004304896 bytes
126 heads, 16 sectors/track, 7754 cylinders, total 15633408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005ecac
Device Boot Start End Blocks Id System
/dev/sdc1 2048 206847 102400 83 Linux
mark@mark-HP-ProBook-4525s:~$
Dev sda is the internal hard drive on my laptop. Dev sdb is an external Seagate hard drive that has my 12.04 linux distro on it. Dev sdc is my 8 GB flash drive. So, the system is aware of the flash, but won't mount it automatically.
Your thoughts would be appreciated.
Mark
Bookmarks