Results 1 to 3 of 3

Thread: Sony Walkman "cannot be operated"

  1. #1
    Join Date
    Jun 2013
    Location
    Switzerland
    Beans
    38
    Distro
    Ubuntu 12.04 Precise Pangolin

    Sony Walkman "cannot be operated"

    Hello everybody!
    I've got an issue with my Sony Walkman player (it worked well before a recent update, in ubuntu LTS), it displays "Connected usb-The player cannot be operated", it seems mounted but when I try to transfert some mp3s it won't respond and the window closes.

    Here is the output dmesg before attaching the device:
    Code:
    [    0.814178] NET: Registered protocol family 10
    [    0.814586] NET: Registered protocol family 17
    [    0.814591] Registering the dns_resolver key type
    [    0.814799] PM: Hibernation image not present or could not be loaded.
    [    0.814814] registered taskstats version 1
    [    0.821702]   Magic number: 9:476:894
    [    0.821795] rtc_cmos 00:06: setting system clock to 2013-08-19 16:53:08 UTC (1376931188)
    [    0.822236] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.822239] EDD information not available.
    [    0.847711] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [    1.074172] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.076338] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [    1.077807] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [    1.077816] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [    1.086168] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [    1.131242] ata1.00: ATA-8: TOSHIBA MQ01ABD050, AX002J, max UDMA/100
    [    1.131250] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    1.132594] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [    1.132926] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [    1.132935] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [    1.134332] ata1.00: configured for UDMA/100
    [    1.134606] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD0 AX00 PQ: 0 ANSI: 5
    [    1.134750] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.134756] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [    1.134759] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    1.134814] sd 0:0:0:0: [sda] Write Protect is off
    [    1.134817] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.134879] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.218748] hub 1-1:1.0: USB hub found
    [    1.218814] hub 1-1:1.0: 4 ports detected
    [    1.247797]  sda: sda1 sda2 < sda5 >
    [    1.248500] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.250060] Freeing unused kernel memory: 924k freed
    [    1.250212] Write protecting the kernel read-only data: 12288k
    [    1.255539] Freeing unused kernel memory: 1592k freed
    [    1.259698] Freeing unused kernel memory: 1188k freed
    [    1.284139] udevd[107]: starting version 175
    [    1.330084] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [    1.347376] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [    1.347398] r8169 0000:03:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    1.347435] r8169 0000:03:00.2: (unregistered net_device): unknown MAC, using family default
    [    1.347452] r8169 0000:03:00.2: setting latency timer to 64
    [    1.347544] r8169 0000:03:00.2: irq 42 for MSI/MSI-X
    [    1.347936] r8169 0000:03:00.2: eth0: RTL8168b/8111b at 0xffffc9000061e000, 50:46:5d:49:da:6b, XID 08800800 IRQ 42
    [    1.347940] r8169 0000:03:00.2: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
    [    1.462908] hub 2-1:1.0: USB hub found
    [    1.462972] hub 2-1:1.0: 4 ports detected
    [    1.574040] hub 3-0:1.0: unable to enumerate USB device on port 1
    [    1.601995] Refined TSC clocksource calibration: 1795.920 MHz.
    [    1.602005] Switching to clocksource tsc
    [    1.646054] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
    [    1.729820] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    2.081919] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
    [    2.786325] Initializing USB Mass Storage driver...
    [    2.786485] scsi4 : usb-storage 4-1:1.0
    [    2.786559] usbcore: registered new interface driver usb-storage
    [    2.786561] USB Mass Storage support registered.
    [    3.785789] scsi 4:0:0:0: Direct-Access     Seagate  Expansion        0608 PQ: 0 ANSI: 6
    [    3.786292] sd 4:0:0:0: Attached scsi generic sg1 type 0
    [    3.786468] sd 4:0:0:0: [sdb] 976773167 512-byte logical blocks: (500 GB/465 GiB)
    [    3.786834] sd 4:0:0:0: [sdb] Write Protect is off
    [    3.786837] sd 4:0:0:0: [sdb] Mode Sense: 4f 00 00 00
    [    3.787203] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    3.788885]  sdb: sdb1
    [    3.790074] sd 4:0:0:0: [sdb] Attached SCSI disk
    [    9.983143] Adding 4073468k swap on /dev/sda5.  Priority:-1 extents:1 across:4073468k 
    [    9.993416] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   10.024450] udevd[420]: starting version 175
    [   10.056067] lp: driver loaded but no devices found
    [   10.090135] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [   10.093490] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   10.093499] mei 0000:00:16.0: setting latency timer to 64
    [   10.093570] mei 0000:00:16.0: irq 43 for MSI/MSI-X
    [   10.119570] [drm] Initialized drm 1.1.0 20060810
    [   10.147739] Initializing Realtek PCIE storage driver...
    [   10.147758] --- 23:42:54 ---
    [   10.147776] rts_bpp 0000:03:00.0: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [   10.151280] Resource length: 0x10000
    [   10.151350] Original address: 0xf7c00000, remapped address: 0xffffc900050c0000
    [   10.151354] pci->irq = 16
    [   10.151357] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 16
    [   10.151372] rts_bpp 0000:03:00.0: setting latency timer to 64
    [   10.158327] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [   10.168220] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   10.168226] i915 0000:00:02.0: setting latency timer to 64
    [   10.191381] scsi5 : SCSI emulation for Realtek BarossaPlusPlus card reader
    [   10.282717] wmi: Mapper loaded
    [   10.306572] rts_bpp: waiting for device to settle before scanning
    [   10.410692] cfg80211: Calling CRDA to update world regulatory domain
    [   10.472170] Bluetooth: Core ver 2.16
    [   10.472192] NET: Registered protocol family 31
    [   10.472194] Bluetooth: HCI device and connection manager initialized
    [   10.472197] Bluetooth: HCI socket layer initialized
    [   10.472199] Bluetooth: L2CAP socket layer initialized
    [   10.472205] Bluetooth: SCO socket layer initialized
    [   10.473045] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [   10.473051] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   10.473053] [drm] Driver supports precise vblank timestamp query.
    [   10.473090] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [   10.480152] Bluetooth: RFCOMM TTY layer initialized
    [   10.480158] Bluetooth: RFCOMM socket layer initialized
    [   10.480161] Bluetooth: RFCOMM ver 1.11
    [   10.484428] ppdev: user-space parallel port driver
    [   10.543747] type=1400 audit(1376931198.224:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=847 comm="apparmor_parser"
    [   10.544307] type=1400 audit(1376931198.224:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=847 comm="apparmor_parser"
    [   10.575425] type=1400 audit(1376931198.256:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=858 comm="apparmor_parser"
    [   10.575905] type=1400 audit(1376931198.256:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=858 comm="apparmor_parser"
    [   10.576186] type=1400 audit(1376931198.256:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser"
    [   10.582856] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   10.582860] Bluetooth: BNEP filters: protocol multicast
    [   10.665627] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [   10.665643] ath9k 0000:02:00.0: setting latency timer to 64
    [   10.694078] ath: EEPROM regdomain: 0x60
    [   10.694081] ath: EEPROM indicates we should expect a direct regpair map
    [   10.694085] ath: Country alpha2 being used: 00
    [   10.694087] ath: Regpair used: 0x60
    [   10.722203] asus_wmi: ASUS WMI generic driver loaded
    [   10.723677] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723681] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723684] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723687] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723690] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723693] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723695] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723698] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723700] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723703] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723706] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723709] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723711] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723714] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723716] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723719] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723722] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723725] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723727] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723730] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723732] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723735] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723737] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723740] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723743] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723746] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723748] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723753] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.724283] asus_wmi: Initialization: 0x1
    [   10.724322] asus_wmi: BIOS WMI version: 7.9
    [   10.724366] asus_wmi: SFUN value: 0x4a0877
    [   10.736297] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input4
    [   10.736361] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
    [   10.788004] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
    [   10.788009] cfg80211: World regulatory domain updated:
    [   10.788011] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   10.788014] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.788017] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   10.788019] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   10.788022] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.788025] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.794975] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   10.795903] Registered led device: ath9k-phy0
    [   10.795912] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90015a00000, irq=17
    [   10.802021] Linux video capture interface: v2.00
    [   10.805049] uvcvideo: Found UVC 1.00 device USB Camera (13d3:5165)
    [   10.819558] init: failsafe main process (912) killed by TERM signal
    [   10.852873] input: USB Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
    [   10.854052] usbcore: registered new interface driver uvcvideo
    [   10.854056] USB Video Class driver (1.1.1)
    [   10.877254] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
    [   10.877989] asus_wmi: Backlight controlled by ACPI video driver
    [   10.891116] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
    [   10.946964] type=1400 audit(1376931198.624:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1038 comm="apparmor_parser"
    [   10.952434] type=1400 audit(1376931198.632:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1038 comm="apparmor_parser"
    [   10.952708] type=1400 audit(1376931198.632:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1038 comm="apparmor_parser"
    [   10.953165] type=1400 audit(1376931198.632:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1037 comm="apparmor_parser"
    [   10.953563] type=1400 audit(1376931198.632:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1037 comm="apparmor_parser"
    [   10.962597] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input6
    [   11.004953] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   11.005680] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   11.020079] r8169 0000:03:00.2: eth0: link down
    [   11.020479] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   11.020945] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   11.173728] init: alsa-restore main process (1100) terminated with status 19
    [   11.193869] fbcon: inteldrmfb (fb0) is primary device
    [   11.195106] Console: switching to colour frame buffer device 170x48
    [   11.195133] fb0: inteldrmfb frame buffer device
    [   11.195136] drm: registered panic notifier
    [   11.209185] ACPI Error: Current brightness invalid (20110623/video-384)
    [   11.223222] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
    [   11.223316] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   11.223620] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [   11.223672] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   11.223754] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [   11.223787] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [   11.303040] rts_bpp: device scan complete
    [   11.303160] scsi 5:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
    [   11.303192] Bad LUN (0:1)
    [   11.303260] Bad target number (1:0)
    [   11.303320] Bad target number (2:0)
    [   11.303360] Bad target number (3:0)
    [   11.303396] Bad target number (4:0)
    [   11.303431] Bad target number (5:0)
    [   11.303464] Bad target number (6:0)
    [   11.303499] Bad target number (7:0)
    [   11.304493] sd 5:0:0:0: Attached scsi generic sg2 type 0
    [   11.306467] sd 5:0:0:0: [sdc] Attached SCSI removable disk
    [   11.789798] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
    [   11.789976] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [   11.791050] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [   11.804223] vboxdrv: Found 2 processor cores.
    [   11.804537] vboxdrv: fAsync=0 offMin=0x1dc offMax=0xa74
    [   11.804597] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [   11.804599] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
    [   11.821203] vboxpci: IOMMU not found (not registered)
    [   12.148638] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 15000000, was 12060000
    [   12.262441] init: plymouth-stop pre-start process (1395) terminated with status 1
    [   12.478718] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
    [   13.830174] wlan0: authenticate with 7c:03:d8:b0:01:be (try 1)
    [   13.832625] wlan0: authenticated
    [   13.859701] wlan0: associate with 7c:03:d8:b0:01:be (try 1)
    [   13.865575] wlan0: RX AssocResp from 7c:03:d8:b0:01:be (capab=0x431 status=0 aid=5)
    [   13.865580] wlan0: associated
    [   13.870721] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   13.871098] cfg80211: Calling CRDA for country: FR
    [   13.875423] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875429] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875431] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875435] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875437] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875440] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875442] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875445] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875448] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875451] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875453] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875456] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875458] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875461] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875463] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875466] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875469] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875472] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875474] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875477] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875479] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875482] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875484] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875487] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875490] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875493] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875495] cfg80211: Disabling freq 2484 MHz
    [   13.875500] cfg80211: Regulatory domain changed to country: FR
    [   13.875502] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   13.875504] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [   13.875507] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [   13.875509] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [   13.875512] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [   23.930872] wlan0: no IPv6 routers present
    [   32.755870] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
    [  224.486468] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 000d0000, was 15000000
    [ 6956.970042] usb 3-2: new high-speed USB device number 3 using xhci_hcd
    [ 6956.988601] scsi6 : usb-storage 3-2:1.0
    [ 6957.986555] scsi 6:0:0:0: Direct-Access     SONY     WALKMAN          1.00 PQ: 0 ANSI: 2
    [ 6957.992648] sd 6:0:0:0: Attached scsi generic sg3 type 0
    [ 6961.000973] ready
    [ 6961.001219] sd 6:0:0:0: [sdd] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 6961.107633] sd 6:0:0:0: [sdd] Write Protect is off
    [ 6961.107645] sd 6:0:0:0: [sdd] Mode Sense: 3b 00 00 00
    [ 6961.217606] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 6961.219241] sd 6:0:0:0: [sdd] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 6961.440868]  sdd: sdd1
    [ 6961.440881] sdd: p1 size 17179869180 extends beyond EOD, enabling native capacity
    [ 6961.441609] sd 6:0:0:0: [sdd] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 6961.657867]  sdd: sdd1
    [ 6961.657877] sdd: p1 size 17179869180 extends beyond EOD, truncated
    [ 6961.661115] sd 6:0:0:0: [sdd] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 6961.877373] sd 6:0:0:0: [sdd] Attached SCSI removable disk
    [ 6973.806420] usb 3-2: USB disconnect, device number 3
    [ 6973.815205] sd 6:0:0:0: [sdd] Synchronizing SCSI cache
    [ 6973.815280] sd 6:0:0:0: [sdd]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 6974.036607] hub 3-0:1.0: unable to enumerate USB device on port 2
    [ 6974.308513] usb 3-2: new full-speed USB device number 5 using xhci_hcd
    [ 6974.308676] usb 3-2: Device not responding to set address.
    [ 6974.512592] usb 3-2: Device not responding to set address.
    [ 6974.716390] usb 3-2: device not accepting address 5, error -71
    [ 6974.828337] usb 3-2: new full-speed USB device number 6 using xhci_hcd
    [ 6974.828500] usb 3-2: Device not responding to set address.
    [ 6975.032426] usb 3-2: Device not responding to set address.
    [ 6975.236217] usb 3-2: device not accepting address 6, error -71
    [ 6975.348185] usb 3-2: new full-speed USB device number 7 using xhci_hcd
    [ 6975.348314] usb 3-2: Device not responding to set address.
    [ 6975.552260] usb 3-2: Device not responding to set address.
    [ 6975.756049] usb 3-2: device not accepting address 7, error -71
    [ 6975.868023] usb 3-2: new full-speed USB device number 8 using xhci_hcd
    [ 6975.868179] usb 3-2: Device not responding to set address.
    [ 6976.072104] usb 3-2: Device not responding to set address.
    [ 6976.275867] usb 3-2: device not accepting address 8, error -71
    [ 6976.275926] hub 3-0:1.0: unable to enumerate USB device on port 2
    [ 6987.908204] usb 3-2: new full-speed USB device number 9 using xhci_hcd
    [ 6987.924839] usb 3-2: not running at top speed; connect to a high speed hub
    [ 6987.927462] scsi7 : usb-storage 3-2:1.0
    [ 6988.357998] usb 3-2: USB disconnect, device number 9
    [ 6988.627966] usb 3-2: new full-speed USB device number 10 using xhci_hcd
    [ 6988.644624] usb 3-2: not running at top speed; connect to a high speed hub
    [ 6988.647718] scsi8 : usb-storage 3-2:1.0
    [ 6988.701884] usb 3-2: USB disconnect, device number 10
    [ 6989.099801] usb 3-2: new full-speed USB device number 11 using xhci_hcd
    [ 6989.099838] usb 3-2: Device not responding to set address.
    [ 6989.303795] usb 3-2: Device not responding to set address.
    [ 6989.507683] usb 3-2: device not accepting address 11, error -71
    [ 6989.563700] hub 3-0:1.0: unable to enumerate USB device on port 2
    [ 6990.995211] usb 3-2: new high-speed USB device number 13 using xhci_hcd
    [ 6991.013606] scsi9 : usb-storage 3-2:1.0
    [ 6991.526910] usb 3-2: USB disconnect, device number 13
    [ 7171.695752] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
    [ 7171.699242] WARNING! power/level is deprecated; use power/control instead
    [ 7172.137658] usb 4-1: USB disconnect, device number 2
    [ 7172.553683] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
    [ 7172.573528] scsi10 : usb-storage 4-1:1.0
    [ 7173.697110] usb 4-1: USB disconnect, device number 3
    [ 7216.959376] hub 3-0:1.0: unable to enumerate USB device on port 2
    [ 7217.259244] usb 3-2: new full-speed USB device number 15 using xhci_hcd
    [ 7217.275942] usb 3-2: not running at top speed; connect to a high speed hub
    [ 7217.278597] scsi11 : usb-storage 3-2:1.0
    [ 7218.275899] scsi 11:0:0:0: Direct-Access     SONY     WALKMAN          1.00 PQ: 0 ANSI: 2
    [ 7218.277499] sd 11:0:0:0: Attached scsi generic sg1 type 0
    [ 7219.286834] ready
    [ 7219.287077] sd 11:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7219.393943] sd 11:0:0:0: [sdb] Write Protect is off
    [ 7219.393954] sd 11:0:0:0: [sdb] Mode Sense: 3b 00 00 00
    [ 7219.503884] sd 11:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 7219.506891] sd 11:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7219.727647]  sdb: sdb1
    [ 7219.727660] sdb: p1 size 17179869180 extends beyond EOD, enabling native capacity
    [ 7219.728269] sd 11:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7219.947441]  sdb: sdb1
    [ 7219.947452] sdb: p1 size 17179869180 extends beyond EOD, truncated
    [ 7219.949198] sd 11:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7220.163633] sd 11:0:0:0: [sdb] Attached SCSI removable disk
    [ 7280.655077] usb 3-2: USB disconnect, device number 15
    [ 7280.661855] sd 11:0:0:0: [sdb] Synchronizing SCSI cache
    [ 7280.661933] sd 11:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 7296.250146] usb 3-2: new high-speed USB device number 16 using xhci_hcd
    [ 7296.268927] scsi12 : usb-storage 3-2:1.0
    [ 7297.266700] scsi 12:0:0:0: Direct-Access     SONY     WALKMAN          1.00 PQ: 0 ANSI: 2
    [ 7297.268222] sd 12:0:0:0: Attached scsi generic sg1 type 0
    [ 7298.277709] ready
    [ 7298.278028] sd 12:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7298.385194] sd 12:0:0:0: [sdb] Write Protect is off
    [ 7298.385205] sd 12:0:0:0: [sdb] Mode Sense: 3b 00 00 00
    [ 7298.495131] sd 12:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 7298.496753] sd 12:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7298.715520]  sdb: sdb1
    [ 7298.715533] sdb: p1 size 17179869180 extends beyond EOD, enabling native capacity
    [ 7298.716333] sd 12:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7298.935392]  sdb: sdb1
    [ 7298.935403] sdb: p1 size 17179869180 extends beyond EOD, truncated
    [ 7298.937805] sd 12:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7299.154904] sd 12:0:0:0: [sdb] Attached SCSI removable disk
    [ 7693.599825] usb 3-2: USB disconnect, device number 16
    [ 7693.608280] sd 12:0:0:0: [sdb] Synchronizing SCSI cache
    [ 7693.608371] sd 12:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 7693.879700] usb 3-2: new full-speed USB device number 17 using xhci_hcd
    [ 7693.879857] usb 3-2: Device not responding to set address.
    [ 7694.083621] usb 3-2: Device not responding to set address.
    [ 7694.287540] usb 3-2: device not accepting address 17, error -71
    [ 7694.343544] hub 3-0:1.0: unable to enumerate USB device on port 2
    dovah@Asus-X501A:~$
    and after:
    Code:
    [    1.218814] hub 1-1:1.0: 4 ports detected
    [    1.247797]  sda: sda1 sda2 < sda5 >
    [    1.248500] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.250060] Freeing unused kernel memory: 924k freed
    [    1.250212] Write protecting the kernel read-only data: 12288k
    [    1.255539] Freeing unused kernel memory: 1592k freed
    [    1.259698] Freeing unused kernel memory: 1188k freed
    [    1.284139] udevd[107]: starting version 175
    [    1.330084] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [    1.347376] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [    1.347398] r8169 0000:03:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    1.347435] r8169 0000:03:00.2: (unregistered net_device): unknown MAC, using family default
    [    1.347452] r8169 0000:03:00.2: setting latency timer to 64
    [    1.347544] r8169 0000:03:00.2: irq 42 for MSI/MSI-X
    [    1.347936] r8169 0000:03:00.2: eth0: RTL8168b/8111b at 0xffffc9000061e000, 50:46:5d:49:da:6b, XID 08800800 IRQ 42
    [    1.347940] r8169 0000:03:00.2: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
    [    1.462908] hub 2-1:1.0: USB hub found
    [    1.462972] hub 2-1:1.0: 4 ports detected
    [    1.574040] hub 3-0:1.0: unable to enumerate USB device on port 1
    [    1.601995] Refined TSC clocksource calibration: 1795.920 MHz.
    [    1.602005] Switching to clocksource tsc
    [    1.646054] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
    [    1.729820] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    2.081919] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
    [    2.786325] Initializing USB Mass Storage driver...
    [    2.786485] scsi4 : usb-storage 4-1:1.0
    [    2.786559] usbcore: registered new interface driver usb-storage
    [    2.786561] USB Mass Storage support registered.
    [    3.785789] scsi 4:0:0:0: Direct-Access     Seagate  Expansion        0608 PQ: 0 ANSI: 6
    [    3.786292] sd 4:0:0:0: Attached scsi generic sg1 type 0
    [    3.786468] sd 4:0:0:0: [sdb] 976773167 512-byte logical blocks: (500 GB/465 GiB)
    [    3.786834] sd 4:0:0:0: [sdb] Write Protect is off
    [    3.786837] sd 4:0:0:0: [sdb] Mode Sense: 4f 00 00 00
    [    3.787203] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    3.788885]  sdb: sdb1
    [    3.790074] sd 4:0:0:0: [sdb] Attached SCSI disk
    [    9.983143] Adding 4073468k swap on /dev/sda5.  Priority:-1 extents:1 across:4073468k 
    [    9.993416] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   10.024450] udevd[420]: starting version 175
    [   10.056067] lp: driver loaded but no devices found
    [   10.090135] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [   10.093490] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   10.093499] mei 0000:00:16.0: setting latency timer to 64
    [   10.093570] mei 0000:00:16.0: irq 43 for MSI/MSI-X
    [   10.119570] [drm] Initialized drm 1.1.0 20060810
    [   10.147739] Initializing Realtek PCIE storage driver...
    [   10.147758] --- 23:42:54 ---
    [   10.147776] rts_bpp 0000:03:00.0: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [   10.151280] Resource length: 0x10000
    [   10.151350] Original address: 0xf7c00000, remapped address: 0xffffc900050c0000
    [   10.151354] pci->irq = 16
    [   10.151357] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 16
    [   10.151372] rts_bpp 0000:03:00.0: setting latency timer to 64
    [   10.158327] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [   10.168220] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   10.168226] i915 0000:00:02.0: setting latency timer to 64
    [   10.191381] scsi5 : SCSI emulation for Realtek BarossaPlusPlus card reader
    [   10.282717] wmi: Mapper loaded
    [   10.306572] rts_bpp: waiting for device to settle before scanning
    [   10.410692] cfg80211: Calling CRDA to update world regulatory domain
    [   10.472170] Bluetooth: Core ver 2.16
    [   10.472192] NET: Registered protocol family 31
    [   10.472194] Bluetooth: HCI device and connection manager initialized
    [   10.472197] Bluetooth: HCI socket layer initialized
    [   10.472199] Bluetooth: L2CAP socket layer initialized
    [   10.472205] Bluetooth: SCO socket layer initialized
    [   10.473045] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [   10.473051] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   10.473053] [drm] Driver supports precise vblank timestamp query.
    [   10.473090] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [   10.480152] Bluetooth: RFCOMM TTY layer initialized
    [   10.480158] Bluetooth: RFCOMM socket layer initialized
    [   10.480161] Bluetooth: RFCOMM ver 1.11
    [   10.484428] ppdev: user-space parallel port driver
    [   10.543747] type=1400 audit(1376931198.224:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=847 comm="apparmor_parser"
    [   10.544307] type=1400 audit(1376931198.224:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=847 comm="apparmor_parser"
    [   10.575425] type=1400 audit(1376931198.256:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=858 comm="apparmor_parser"
    [   10.575905] type=1400 audit(1376931198.256:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=858 comm="apparmor_parser"
    [   10.576186] type=1400 audit(1376931198.256:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser"
    [   10.582856] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   10.582860] Bluetooth: BNEP filters: protocol multicast
    [   10.665627] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [   10.665643] ath9k 0000:02:00.0: setting latency timer to 64
    [   10.694078] ath: EEPROM regdomain: 0x60
    [   10.694081] ath: EEPROM indicates we should expect a direct regpair map
    [   10.694085] ath: Country alpha2 being used: 00
    [   10.694087] ath: Regpair used: 0x60
    [   10.722203] asus_wmi: ASUS WMI generic driver loaded
    [   10.723677] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723681] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723684] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723687] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723690] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723693] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723695] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723698] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723700] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723703] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723706] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723709] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723711] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723714] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723716] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723719] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723722] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723725] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723727] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723730] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723732] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723735] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723737] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723740] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723743] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723746] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.723748] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [   10.723753] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   10.724283] asus_wmi: Initialization: 0x1
    [   10.724322] asus_wmi: BIOS WMI version: 7.9
    [   10.724366] asus_wmi: SFUN value: 0x4a0877
    [   10.736297] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input4
    [   10.736361] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
    [   10.788004] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
    [   10.788009] cfg80211: World regulatory domain updated:
    [   10.788011] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   10.788014] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.788017] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   10.788019] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   10.788022] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.788025] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.794975] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   10.795903] Registered led device: ath9k-phy0
    [   10.795912] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90015a00000, irq=17
    [   10.802021] Linux video capture interface: v2.00
    [   10.805049] uvcvideo: Found UVC 1.00 device USB Camera (13d3:5165)
    [   10.819558] init: failsafe main process (912) killed by TERM signal
    [   10.852873] input: USB Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
    [   10.854052] usbcore: registered new interface driver uvcvideo
    [   10.854056] USB Video Class driver (1.1.1)
    [   10.877254] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
    [   10.877989] asus_wmi: Backlight controlled by ACPI video driver
    [   10.891116] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
    [   10.946964] type=1400 audit(1376931198.624:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1038 comm="apparmor_parser"
    [   10.952434] type=1400 audit(1376931198.632:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1038 comm="apparmor_parser"
    [   10.952708] type=1400 audit(1376931198.632:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1038 comm="apparmor_parser"
    [   10.953165] type=1400 audit(1376931198.632:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1037 comm="apparmor_parser"
    [   10.953563] type=1400 audit(1376931198.632:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1037 comm="apparmor_parser"
    [   10.962597] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input6
    [   11.004953] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   11.005680] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   11.020079] r8169 0000:03:00.2: eth0: link down
    [   11.020479] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   11.020945] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   11.173728] init: alsa-restore main process (1100) terminated with status 19
    [   11.193869] fbcon: inteldrmfb (fb0) is primary device
    [   11.195106] Console: switching to colour frame buffer device 170x48
    [   11.195133] fb0: inteldrmfb frame buffer device
    [   11.195136] drm: registered panic notifier
    [   11.209185] ACPI Error: Current brightness invalid (20110623/video-384)
    [   11.223222] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
    [   11.223316] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   11.223620] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [   11.223672] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   11.223754] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [   11.223787] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [   11.303040] rts_bpp: device scan complete
    [   11.303160] scsi 5:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
    [   11.303192] Bad LUN (0:1)
    [   11.303260] Bad target number (1:0)
    [   11.303320] Bad target number (2:0)
    [   11.303360] Bad target number (3:0)
    [   11.303396] Bad target number (4:0)
    [   11.303431] Bad target number (5:0)
    [   11.303464] Bad target number (6:0)
    [   11.303499] Bad target number (7:0)
    [   11.304493] sd 5:0:0:0: Attached scsi generic sg2 type 0
    [   11.306467] sd 5:0:0:0: [sdc] Attached SCSI removable disk
    [   11.789798] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
    [   11.789976] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [   11.791050] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [   11.804223] vboxdrv: Found 2 processor cores.
    [   11.804537] vboxdrv: fAsync=0 offMin=0x1dc offMax=0xa74
    [   11.804597] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [   11.804599] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
    [   11.821203] vboxpci: IOMMU not found (not registered)
    [   12.148638] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 15000000, was 12060000
    [   12.262441] init: plymouth-stop pre-start process (1395) terminated with status 1
    [   12.478718] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
    [   13.830174] wlan0: authenticate with 7c:03:d8:b0:01:be (try 1)
    [   13.832625] wlan0: authenticated
    [   13.859701] wlan0: associate with 7c:03:d8:b0:01:be (try 1)
    [   13.865575] wlan0: RX AssocResp from 7c:03:d8:b0:01:be (capab=0x431 status=0 aid=5)
    [   13.865580] wlan0: associated
    [   13.870721] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   13.871098] cfg80211: Calling CRDA for country: FR
    [   13.875423] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875429] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875431] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875435] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875437] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875440] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875442] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875445] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875448] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875451] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875453] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875456] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875458] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875461] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875463] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875466] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875469] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875472] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875474] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875477] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875479] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875482] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875484] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875487] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875490] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   13.875493] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [   13.875495] cfg80211: Disabling freq 2484 MHz
    [   13.875500] cfg80211: Regulatory domain changed to country: FR
    [   13.875502] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   13.875504] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [   13.875507] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [   13.875509] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [   13.875512] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [   23.930872] wlan0: no IPv6 routers present
    [   32.755870] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
    [  224.486468] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 000d0000, was 15000000
    [ 6956.970042] usb 3-2: new high-speed USB device number 3 using xhci_hcd
    [ 6956.988601] scsi6 : usb-storage 3-2:1.0
    [ 6957.986555] scsi 6:0:0:0: Direct-Access     SONY     WALKMAN          1.00 PQ: 0 ANSI: 2
    [ 6957.992648] sd 6:0:0:0: Attached scsi generic sg3 type 0
    [ 6961.000973] ready
    [ 6961.001219] sd 6:0:0:0: [sdd] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 6961.107633] sd 6:0:0:0: [sdd] Write Protect is off
    [ 6961.107645] sd 6:0:0:0: [sdd] Mode Sense: 3b 00 00 00
    [ 6961.217606] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 6961.219241] sd 6:0:0:0: [sdd] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 6961.440868]  sdd: sdd1
    [ 6961.440881] sdd: p1 size 17179869180 extends beyond EOD, enabling native capacity
    [ 6961.441609] sd 6:0:0:0: [sdd] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 6961.657867]  sdd: sdd1
    [ 6961.657877] sdd: p1 size 17179869180 extends beyond EOD, truncated
    [ 6961.661115] sd 6:0:0:0: [sdd] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 6961.877373] sd 6:0:0:0: [sdd] Attached SCSI removable disk
    [ 6973.806420] usb 3-2: USB disconnect, device number 3
    [ 6973.815205] sd 6:0:0:0: [sdd] Synchronizing SCSI cache
    [ 6973.815280] sd 6:0:0:0: [sdd]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 6974.036607] hub 3-0:1.0: unable to enumerate USB device on port 2
    [ 6974.308513] usb 3-2: new full-speed USB device number 5 using xhci_hcd
    [ 6974.308676] usb 3-2: Device not responding to set address.
    [ 6974.512592] usb 3-2: Device not responding to set address.
    [ 6974.716390] usb 3-2: device not accepting address 5, error -71
    [ 6974.828337] usb 3-2: new full-speed USB device number 6 using xhci_hcd
    [ 6974.828500] usb 3-2: Device not responding to set address.
    [ 6975.032426] usb 3-2: Device not responding to set address.
    [ 6975.236217] usb 3-2: device not accepting address 6, error -71
    [ 6975.348185] usb 3-2: new full-speed USB device number 7 using xhci_hcd
    [ 6975.348314] usb 3-2: Device not responding to set address.
    [ 6975.552260] usb 3-2: Device not responding to set address.
    [ 6975.756049] usb 3-2: device not accepting address 7, error -71
    [ 6975.868023] usb 3-2: new full-speed USB device number 8 using xhci_hcd
    [ 6975.868179] usb 3-2: Device not responding to set address.
    [ 6976.072104] usb 3-2: Device not responding to set address.
    [ 6976.275867] usb 3-2: device not accepting address 8, error -71
    [ 6976.275926] hub 3-0:1.0: unable to enumerate USB device on port 2
    [ 6987.908204] usb 3-2: new full-speed USB device number 9 using xhci_hcd
    [ 6987.924839] usb 3-2: not running at top speed; connect to a high speed hub
    [ 6987.927462] scsi7 : usb-storage 3-2:1.0
    [ 6988.357998] usb 3-2: USB disconnect, device number 9
    [ 6988.627966] usb 3-2: new full-speed USB device number 10 using xhci_hcd
    [ 6988.644624] usb 3-2: not running at top speed; connect to a high speed hub
    [ 6988.647718] scsi8 : usb-storage 3-2:1.0
    [ 6988.701884] usb 3-2: USB disconnect, device number 10
    [ 6989.099801] usb 3-2: new full-speed USB device number 11 using xhci_hcd
    [ 6989.099838] usb 3-2: Device not responding to set address.
    [ 6989.303795] usb 3-2: Device not responding to set address.
    [ 6989.507683] usb 3-2: device not accepting address 11, error -71
    [ 6989.563700] hub 3-0:1.0: unable to enumerate USB device on port 2
    [ 6990.995211] usb 3-2: new high-speed USB device number 13 using xhci_hcd
    [ 6991.013606] scsi9 : usb-storage 3-2:1.0
    [ 6991.526910] usb 3-2: USB disconnect, device number 13
    [ 7171.695752] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
    [ 7171.699242] WARNING! power/level is deprecated; use power/control instead
    [ 7172.137658] usb 4-1: USB disconnect, device number 2
    [ 7172.553683] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
    [ 7172.573528] scsi10 : usb-storage 4-1:1.0
    [ 7173.697110] usb 4-1: USB disconnect, device number 3
    [ 7216.959376] hub 3-0:1.0: unable to enumerate USB device on port 2
    [ 7217.259244] usb 3-2: new full-speed USB device number 15 using xhci_hcd
    [ 7217.275942] usb 3-2: not running at top speed; connect to a high speed hub
    [ 7217.278597] scsi11 : usb-storage 3-2:1.0
    [ 7218.275899] scsi 11:0:0:0: Direct-Access     SONY     WALKMAN          1.00 PQ: 0 ANSI: 2
    [ 7218.277499] sd 11:0:0:0: Attached scsi generic sg1 type 0
    [ 7219.286834] ready
    [ 7219.287077] sd 11:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7219.393943] sd 11:0:0:0: [sdb] Write Protect is off
    [ 7219.393954] sd 11:0:0:0: [sdb] Mode Sense: 3b 00 00 00
    [ 7219.503884] sd 11:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 7219.506891] sd 11:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7219.727647]  sdb: sdb1
    [ 7219.727660] sdb: p1 size 17179869180 extends beyond EOD, enabling native capacity
    [ 7219.728269] sd 11:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7219.947441]  sdb: sdb1
    [ 7219.947452] sdb: p1 size 17179869180 extends beyond EOD, truncated
    [ 7219.949198] sd 11:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7220.163633] sd 11:0:0:0: [sdb] Attached SCSI removable disk
    [ 7280.655077] usb 3-2: USB disconnect, device number 15
    [ 7280.661855] sd 11:0:0:0: [sdb] Synchronizing SCSI cache
    [ 7280.661933] sd 11:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 7296.250146] usb 3-2: new high-speed USB device number 16 using xhci_hcd
    [ 7296.268927] scsi12 : usb-storage 3-2:1.0
    [ 7297.266700] scsi 12:0:0:0: Direct-Access     SONY     WALKMAN          1.00 PQ: 0 ANSI: 2
    [ 7297.268222] sd 12:0:0:0: Attached scsi generic sg1 type 0
    [ 7298.277709] ready
    [ 7298.278028] sd 12:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7298.385194] sd 12:0:0:0: [sdb] Write Protect is off
    [ 7298.385205] sd 12:0:0:0: [sdb] Mode Sense: 3b 00 00 00
    [ 7298.495131] sd 12:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 7298.496753] sd 12:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7298.715520]  sdb: sdb1
    [ 7298.715533] sdb: p1 size 17179869180 extends beyond EOD, enabling native capacity
    [ 7298.716333] sd 12:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7298.935392]  sdb: sdb1
    [ 7298.935403] sdb: p1 size 17179869180 extends beyond EOD, truncated
    [ 7298.937805] sd 12:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7299.154904] sd 12:0:0:0: [sdb] Attached SCSI removable disk
    [ 7693.599825] usb 3-2: USB disconnect, device number 16
    [ 7693.608280] sd 12:0:0:0: [sdb] Synchronizing SCSI cache
    [ 7693.608371] sd 12:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 7693.879700] usb 3-2: new full-speed USB device number 17 using xhci_hcd
    [ 7693.879857] usb 3-2: Device not responding to set address.
    [ 7694.083621] usb 3-2: Device not responding to set address.
    [ 7694.287540] usb 3-2: device not accepting address 17, error -71
    [ 7694.343544] hub 3-0:1.0: unable to enumerate USB device on port 2
    [ 7757.415450] usb 3-2: new high-speed USB device number 19 using xhci_hcd
    [ 7757.433717] scsi13 : usb-storage 3-2:1.0
    [ 7758.431932] scsi 13:0:0:0: Direct-Access     SONY     WALKMAN          1.00 PQ: 0 ANSI: 2
    [ 7758.433539] sd 13:0:0:0: Attached scsi generic sg1 type 0
    [ 7759.443076] ready
    [ 7759.443302] sd 13:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7759.549045] sd 13:0:0:0: [sdb] Write Protect is off
    [ 7759.549056] sd 13:0:0:0: [sdb] Mode Sense: 3b 00 00 00
    [ 7759.659012] sd 13:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 7759.660767] sd 13:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7759.879418]  sdb: sdb1
    [ 7759.879431] sdb: p1 size 17179869180 extends beyond EOD, enabling native capacity
    [ 7759.880186] sd 13:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7760.099264]  sdb: sdb1
    [ 7760.099274] sdb: p1 size 17179869180 extends beyond EOD, truncated
    [ 7760.100821] sd 13:0:0:0: [sdb] 7435968 2048-byte logical blocks: (15.2 GB/14.1 GiB)
    [ 7760.318772] sd 13:0:0:0: [sdb] Attached SCSI removable disk
    [ 7764.781235] usb 3-2: reset high-speed USB device number 19 using xhci_hcd
    [ 7764.781319] usb 3-2: Device not responding to set address.
    [ 7764.985174] usb 3-2: Device not responding to set address.
    [ 7765.188990] usb 3-2: device not accepting address 19, error -71
    [ 7765.245038] usb 3-2: USB disconnect, device number 19
    [ 7765.257004] sd 13:0:0:0: [sdb] Synchronizing SCSI cache
    [ 7765.257069] sd 13:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 7765.257846] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d112d900
    [ 7765.257854] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d112d940
    [ 7765.257861] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d112d980
    dovah@Asus-X501A:~$
    Thank you for your help :/

  2. #2
    Join Date
    Apr 2005
    Location
    EU - UK
    Beans
    3,323
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Sony Walkman "cannot be operated"

    Tried a different USB port?

  3. #3
    Join Date
    Jun 2013
    Location
    Switzerland
    Beans
    38
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Sony Walkman "cannot be operated"

    Yes, I did. However, I reinstalled the system, now it works, thank you for your tip.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •