Results 1 to 3 of 3

Thread: 12.10 / 13.04 + NVIDIA NV18 GeForce4 MX 440 + nouveau driver = gliches + freezes

  1. #1
    Join Date
    Dec 2007
    Beans
    15

    12.10 / 13.04 + NVIDIA NV18 GeForce4 MX 440 + nouveau driver = gliches + freezes

    Hi,

    I have just installed lubuntu 12.10 and then dist-upgraded to 13.04.
    I am having the problem described below in both environments and from the very first minute.

    My graphic card is an old nvidia GeForce4, and the driver in use the default opensource driver for it: nouveau
    Code:
    $ sudo lspci -v
    01:00.0 VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a4) (prog-if 00 [VGA controller])
    	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
    	Memory at ef000000 (32-bit, non-prefetchable) [size=16M]
    	Memory at f8000000 (32-bit, prefetchable) [size=64M]
    	Expansion ROM at f7fe0000 [disabled] [size=128K]
    	Capabilities: [60] Power Management version 2
    	Capabilities: [44] AGP version 3.0
    	Kernel driver in use: nouveau
    The selected resolution chosen by the system was correct: 1024x768@75

    Code:
    $ sudo hwinfo --monitor
    > hal.1: read hal dataprocess 1762: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282.
    This is normally a bug in some application using the D-Bus library.
    libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
    21: None 00.0: 10000 Monitor                                    
      [Created at monitor.95]
      Unique ID: rdCR.juHc5KKHUU0
      Hardware Class: monitor
      Model: "LCD MONITOR"
      Vendor: WAN 
      Device: eisa 0x0158 "LCD MONITOR"
      Serial ID: "436"
      Resolution: 720x400@70Hz
      Resolution: 640x480@60Hz
      Resolution: 640x480@67Hz
      Resolution: 640x480@72Hz
      Resolution: 640x480@75Hz
      Resolution: 800x600@56Hz
      Resolution: 800x600@60Hz
      Resolution: 800x600@72Hz
      Resolution: 800x600@75Hz
      Resolution: 832x624@75Hz
      Resolution: 1024x768@60Hz
      Resolution: 1024x768@70Hz
      Resolution: 1024x768@75Hz
      Resolution: 1024x768@60Hz
      Resolution: 1024x768@70Hz
      Resolution: 1024x768@75Hz
      Resolution: 800x600@60Hz
      Size: 304x228 mm
      Detailed Timings #0:
         Resolution: 1024x768
         Horizontal: 1024 1048 1184 1344 (+24 +160 +320) -hsync
           Vertical:  768  771  777  806 (+3 +9 +38) -vsync
        Frequencies: 65.00 MHz, 48.36 kHz, 60.00 Hz
      Driver Info #0:
        Max. Resolution: 1024x768
        Vert. Sync Range: 55-75 Hz
        Hor. Sync Range: 30-60 kHz
        Bandwidth: 65 MHz
      Config Status: cfg=new, avail=yes, need=no, active=unknown
    Code:
    $ sudo hwinfo --framebuffer
    > hal.1: read hal dataprocess 1778: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282.
    This is normally a bug in some application using the D-Bus library.
    libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
    02: None 00.0: 11001 VESA Framebuffer                           
      [Created at bios.464]
      Unique ID: rdCR.olilvk83UQ6
      Hardware Class: framebuffer
      Model: "NVIDIA NV18 Board"
      Vendor: "NVIDIA Corporation"
      Device: "NV18 Board"
      SubVendor: "NVIDIA"
      SubDevice: 
      Revision: "Chip Rev A2"
      Memory Size: 64 MB
      Memory Range: 0xf8000000-0xfbffffff (rw)
      Mode 0x0300: 640x400 (+640), 8 bits
      Mode 0x0301: 640x480 (+640), 8 bits
      Mode 0x0303: 800x600 (+800), 8 bits
      Mode 0x0305: 1024x768 (+1024), 8 bits
      Mode 0x0307: 1280x1024 (+1280), 8 bits
      Mode 0x030e: 320x200 (+640), 16 bits
      Mode 0x030f: 320x200 (+1280), 24 bits
      Mode 0x0311: 640x480 (+1280), 16 bits
      Mode 0x0312: 640x480 (+2560), 24 bits
      Mode 0x0314: 800x600 (+1600), 16 bits
      Mode 0x0315: 800x600 (+3200), 24 bits
      Mode 0x0317: 1024x768 (+2048), 16 bits
      Mode 0x0318: 1024x768 (+4096), 24 bits
      Mode 0x031a: 1280x1024 (+2560), 16 bits
      Mode 0x031b: 1280x1024 (+5120), 24 bits
      Mode 0x0330: 320x200 (+320), 8 bits
      Mode 0x0331: 320x400 (+320), 8 bits
      Mode 0x0332: 320x400 (+640), 16 bits
      Mode 0x0333: 320x400 (+1280), 24 bits
      Mode 0x0334: 320x240 (+320), 8 bits
      Mode 0x0335: 320x240 (+640), 16 bits
      Mode 0x0336: 320x240 (+1280), 24 bits
      Mode 0x033d: 640x400 (+1280), 16 bits
      Mode 0x033e: 640x400 (+2560), 24 bits
      Mode 0x0345: 1600x1200 (+1600), 8 bits
      Mode 0x0346: 1600x1200 (+3200), 16 bits
      Mode 0x0347: 1400x1050 (+1400), 8 bits
      Mode 0x0348: 1400x1050 (+2800), 16 bits
      Mode 0x0352: 2048x1536 (+8192), 24 bits
      Config Status: cfg=new, avail=yes, need=no, active=unknown
    Code:
    $ cat /var/log/Xorg.0.log
    Xorg.0.log      Xorg.0.log.old  
    celia@recepcion:~$ cat /var/log/Xorg.0.log.old 
    [    23.914] 
    X.Org X Server 1.13.3
    Release Date: 2013-03-07
    [    23.914] X Protocol Version 11, Revision 0
    [    23.914] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
    [    23.914] Current Operating System: Linux recepcion 3.8.0-27-generic #40-Ubuntu SMP Tue Jul 9 00:19:35 UTC 2013 i686
    [    23.914] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-27-generic root=UUID=0d9e1f78-3d12-4e8e-9b27-c1af44adfbb0 ro quiet splash vt.handoff=7
    [    23.914] Build Date: 17 April 2013  10:42:56PM
    [    23.914] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 
    [    23.914] Current version of pixman: 0.28.2
    [    23.914] 	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    [    23.914] Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    23.915] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug  6 01:07:15 2013
    [    23.951] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    23.952] (==) No Layout section.  Using the first Screen section.
    [    23.952] (==) No screen section available. Using defaults.
    [    23.952] (**) |-->Screen "Default Screen Section" (0)
    [    23.952] (**) |   |-->Monitor "<default monitor>"
    [    23.953] (==) No monitor specified for screen "Default Screen Section".
    	Using a default monitor configuration.
    [    23.953] (==) Automatically adding devices
    [    23.953] (==) Automatically enabling devices
    [    23.953] (==) Automatically adding GPU devices
    [    23.953] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [    23.953] 	Entry deleted from font path.
    [    23.953] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    [    23.953] 	Entry deleted from font path.
    [    23.953] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    [    23.953] 	Entry deleted from font path.
    [    23.953] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    [    23.953] 	Entry deleted from font path.
    [    23.953] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    [    23.953] 	Entry deleted from font path.
    [    23.953] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
    [    23.953] 	Entry deleted from font path.
    [    23.953] (==) FontPath set to:
    	/usr/share/fonts/X11/misc,
    	/usr/share/fonts/X11/Type1,
    	built-ins
    [    23.953] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    [    23.953] (II) The server relies on udev to provide the list of input devices.
    	If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    23.953] (II) Loader magic: 0xb77066a0
    [    23.953] (II) Module ABI versions:
    [    23.953] 	X.Org ANSI C Emulation: 0.4
    [    23.953] 	X.Org Video Driver: 13.1
    [    23.953] 	X.Org XInput driver : 18.0
    [    23.953] 	X.Org Server Extension : 7.0
    [    23.954] (II) config/udev: Adding drm device (/dev/dri/card0)
    [    23.955] (--) PCI:*(0:1:0:0) 10de:0181:0000:0000 rev 164, Mem @ 0xef000000/16777216, 0xf8000000/67108864, BIOS @ 0x????????/131072
    [    23.955] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [    23.955] Initializing built-in extension Generic Event Extension
    [    23.955] Initializing built-in extension SHAPE
    [    23.955] Initializing built-in extension MIT-SHM
    [    23.955] Initializing built-in extension XInputExtension
    [    23.955] Initializing built-in extension XTEST
    [    23.955] Initializing built-in extension BIG-REQUESTS
    [    23.955] Initializing built-in extension SYNC
    [    23.955] Initializing built-in extension XKEYBOARD
    [    23.955] Initializing built-in extension XC-MISC
    [    23.955] Initializing built-in extension SECURITY
    [    23.955] Initializing built-in extension XINERAMA
    [    23.955] Initializing built-in extension XFIXES
    [    23.955] Initializing built-in extension RENDER
    [    23.955] Initializing built-in extension RANDR
    [    23.955] Initializing built-in extension COMPOSITE
    [    23.956] Initializing built-in extension DAMAGE
    [    23.956] Initializing built-in extension MIT-SCREEN-SAVER
    [    23.956] Initializing built-in extension DOUBLE-BUFFER
    [    23.956] Initializing built-in extension RECORD
    [    23.956] Initializing built-in extension DPMS
    [    23.956] Initializing built-in extension X-Resource
    [    23.956] Initializing built-in extension XVideo
    [    23.956] Initializing built-in extension XVideo-MotionCompensation
    [    23.956] Initializing built-in extension SELinux
    [    23.956] Initializing built-in extension XFree86-VidModeExtension
    [    23.956] Initializing built-in extension XFree86-DGA
    [    23.956] Initializing built-in extension XFree86-DRI
    [    23.956] Initializing built-in extension DRI2
    [    23.956] (II) LoadModule: "glx"
    [    24.037] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [    24.038] (II) Module glx: vendor="X.Org Foundation"
    [    24.038] 	compiled for 1.13.3, module version = 1.0.0
    [    24.038] 	ABI class: X.Org Server Extension, version 7.0
    [    24.038] (==) AIGLX enabled
    [    24.038] Loading extension GLX
    [    24.038] (==) Matched nvidia as autoconfigured driver 0
    [    24.038] (==) Matched nouveau as autoconfigured driver 1
    [    24.038] (==) Matched nvidia as autoconfigured driver 2
    [    24.038] (==) Matched nouveau as autoconfigured driver 3
    [    24.038] (==) Matched vesa as autoconfigured driver 4
    [    24.038] (==) Matched modesetting as autoconfigured driver 5
    [    24.038] (==) Matched fbdev as autoconfigured driver 6
    [    24.038] (==) Assigned the driver to the xf86ConfigLayout
    [    24.038] (II) LoadModule: "nvidia"
    [    24.068] (WW) Warning, couldn't open module nvidia
    [    24.068] (II) UnloadModule: "nvidia"
    [    24.068] (II) Unloading nvidia
    [    24.068] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [    24.068] (II) LoadModule: "nouveau"
    [    24.068] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [    24.129] (II) Module nouveau: vendor="X.Org Foundation"
    [    24.129] 	compiled for 1.13.3, module version = 1.0.7
    [    24.129] 	Module class: X.Org Video Driver
    [    24.129] 	ABI class: X.Org Video Driver, version 13.1
    [    24.129] (II) LoadModule: "vesa"
    [    24.130] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [    24.130] (II) Module vesa: vendor="X.Org Foundation"
    [    24.130] 	compiled for 1.12.99.902, module version = 2.3.2
    [    24.130] 	Module class: X.Org Video Driver
    [    24.130] 	ABI class: X.Org Video Driver, version 13.0
    [    24.130] (II) LoadModule: "modesetting"
    [    24.130] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [    24.131] (II) Module modesetting: vendor="X.Org Foundation"
    [    24.131] 	compiled for 1.13.3, module version = 0.7.0
    [    24.131] 	Module class: X.Org Video Driver
    [    24.131] 	ABI class: X.Org Video Driver, version 13.1
    [    24.131] (II) LoadModule: "fbdev"
    [    24.131] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [    24.131] (II) Module fbdev: vendor="X.Org Foundation"
    [    24.131] 	compiled for 1.12.99.902, module version = 0.4.3
    [    24.131] 	Module class: X.Org Video Driver
    [    24.131] 	ABI class: X.Org Video Driver, version 13.0
    [    24.131] (==) Matched nvidia as autoconfigured driver 0
    [    24.131] (==) Matched nouveau as autoconfigured driver 1
    [    24.131] (==) Matched nvidia as autoconfigured driver 2
    [    24.131] (==) Matched nouveau as autoconfigured driver 3
    [    24.131] (==) Matched vesa as autoconfigured driver 4
    [    24.131] (==) Matched modesetting as autoconfigured driver 5
    [    24.131] (==) Matched fbdev as autoconfigured driver 6
    [    24.131] (==) Assigned the driver to the xf86ConfigLayout
    [    24.131] (II) LoadModule: "nvidia"
    [    24.132] (WW) Warning, couldn't open module nvidia
    [    24.132] (II) UnloadModule: "nvidia"
    [    24.132] (II) Unloading nvidia
    [    24.132] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [    24.132] (II) LoadModule: "nouveau"
    [    24.132] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [    24.132] (II) Module nouveau: vendor="X.Org Foundation"
    [    24.132] 	compiled for 1.13.3, module version = 1.0.7
    [    24.132] 	Module class: X.Org Video Driver
    [    24.132] 	ABI class: X.Org Video Driver, version 13.1
    [    24.132] (II) UnloadModule: "nouveau"
    [    24.132] (II) Unloading nouveau
    [    24.132] (II) Failed to load module "nouveau" (already loaded, 0)
    [    24.132] (II) LoadModule: "vesa"
    [    24.133] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [    24.133] (II) Module vesa: vendor="X.Org Foundation"
    [    24.133] 	compiled for 1.12.99.902, module version = 2.3.2
    [    24.133] 	Module class: X.Org Video Driver
    [    24.133] 	ABI class: X.Org Video Driver, version 13.0
    [    24.133] (II) UnloadModule: "vesa"
    [    24.133] (II) Unloading vesa
    [    24.133] (II) Failed to load module "vesa" (already loaded, 0)
    [    24.133] (II) LoadModule: "modesetting"
    [    24.133] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [    24.133] (II) Module modesetting: vendor="X.Org Foundation"
    [    24.133] 	compiled for 1.13.3, module version = 0.7.0
    [    24.133] 	Module class: X.Org Video Driver
    [    24.133] 	ABI class: X.Org Video Driver, version 13.1
    [    24.133] (II) UnloadModule: "modesetting"
    [    24.133] (II) Unloading modesetting
    [    24.133] (II) Failed to load module "modesetting" (already loaded, 0)
    [    24.133] (II) LoadModule: "fbdev"
    [    24.134] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [    24.134] (II) Module fbdev: vendor="X.Org Foundation"
    [    24.134] 	compiled for 1.12.99.902, module version = 0.4.3
    [    24.134] 	Module class: X.Org Video Driver
    [    24.134] 	ABI class: X.Org Video Driver, version 13.0
    [    24.134] (II) UnloadModule: "fbdev"
    [    24.134] (II) Unloading fbdev
    [    24.134] (II) Failed to load module "fbdev" (already loaded, 0)
    [    24.134] (II) NOUVEAU driver Date:   Wed Mar 27 09:50:03 2013 +0100
    [    24.134] (II) NOUVEAU driver for NVIDIA chipset families :
    [    24.134] 	RIVA TNT        (NV04)
    [    24.134] 	RIVA TNT2       (NV05)
    [    24.134] 	GeForce 256     (NV10)
    [    24.134] 	GeForce 2       (NV11, NV15)
    [    24.134] 	GeForce 4MX     (NV17, NV18)
    [    24.134] 	GeForce 3       (NV20)
    [    24.134] 	GeForce 4Ti     (NV25, NV28)
    [    24.134] 	GeForce FX      (NV3x)
    [    24.134] 	GeForce 6       (NV4x)
    [    24.134] 	GeForce 7       (G7x)
    [    24.134] 	GeForce 8       (G8x)
    [    24.134] 	GeForce GTX 200 (NVA0)
    [    24.134] 	GeForce GTX 400 (NVC0)
    [    24.134] (II) VESA: driver for VESA chipsets: vesa
    [    24.134] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [    24.135] (II) FBDEV: driver for framebuffer: fbdev
    [    24.135] (++) using VT number 7
    
    [    24.135] (II) [drm] nouveau interface version: 1.1.0
    [    24.135] (WW) Falling back to old probe method for vesa
    [    24.135] (WW) Falling back to old probe method for modesetting
    [    24.135] (WW) Falling back to old probe method for fbdev
    [    24.135] (II) Loading sub module "fbdevhw"
    [    24.135] (II) LoadModule: "fbdevhw"
    [    24.136] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [    24.136] (II) Module fbdevhw: vendor="X.Org Foundation"
    [    24.136] 	compiled for 1.13.3, module version = 0.0.2
    [    24.136] 	ABI class: X.Org Video Driver, version 13.1
    [    24.136] (II) Loading sub module "dri"
    [    24.136] (II) LoadModule: "dri"
    [    24.136] (II) Module "dri" already built-in
    [    24.136] (II) NOUVEAU(0): Loaded DRI module
    [    24.136] (--) NOUVEAU(0): Chipset: "NVIDIA NV18"
    [    24.136] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    	"Default Screen Section" for depth/fbbpp 24/32
    [    24.136] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [    24.136] (==) NOUVEAU(0): RGB weight 888
    [    24.136] (==) NOUVEAU(0): Default visual is TrueColor
    [    24.136] (==) NOUVEAU(0): Using HW cursor
    [    24.136] (==) NOUVEAU(0): GLX sync to VBlank enabled.
    [    24.137] (==) NOUVEAU(0): Page flipping enabled
    [    24.137] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [    24.169] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [    24.196] (II) NOUVEAU(0): Output TV-1 has no monitor section
    [    24.228] (II) NOUVEAU(0): EDID for output VGA-1
    [    24.228] (II) NOUVEAU(0): Manufacturer: WAN  Model: 158  Serial#: 1436
    [    24.228] (II) NOUVEAU(0): Year: 2003  Week: 12
    [    24.228] (II) NOUVEAU(0): EDID Version: 1.3
    [    24.228] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
    [    24.228] (II) NOUVEAU(0): Sync:  Separate
    [    24.228] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 30  vert.: 23
    [    24.228] (II) NOUVEAU(0): Gamma: 2.20
    [    24.228] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [    24.228] (II) NOUVEAU(0): First detailed timing not preferred mode in violation of standard!
    [    24.228] (II) NOUVEAU(0): redX: 0.616 redY: 0.344   greenX: 0.308 greenY: 0.565
    [    24.228] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.130   whiteX: 0.313 whiteY: 0.329
    [    24.228] (II) NOUVEAU(0): Supported established timings:
    [    24.228] (II) NOUVEAU(0): 720x400@70Hz
    [    24.228] (II) NOUVEAU(0): 640x480@60Hz
    [    24.228] (II) NOUVEAU(0): 640x480@67Hz
    [    24.228] (II) NOUVEAU(0): 640x480@72Hz
    [    24.228] (II) NOUVEAU(0): 640x480@75Hz
    [    24.228] (II) NOUVEAU(0): 800x600@56Hz
    [    24.228] (II) NOUVEAU(0): 800x600@60Hz
    [    24.228] (II) NOUVEAU(0): 800x600@72Hz
    [    24.228] (II) NOUVEAU(0): 800x600@75Hz
    [    24.228] (II) NOUVEAU(0): 832x624@75Hz
    [    24.228] (II) NOUVEAU(0): 1024x768@60Hz
    [    24.228] (II) NOUVEAU(0): 1024x768@70Hz
    [    24.228] (II) NOUVEAU(0): 1024x768@75Hz
    [    24.228] (II) NOUVEAU(0): Manufacturer's mask: 0
    [    24.228] (II) NOUVEAU(0): Supported standard timings:
    [    24.228] (II) NOUVEAU(0): #0: hsize: 1024  vsize 768  refresh: 60  vid: 16481
    [    24.228] (II) NOUVEAU(0): #1: hsize: 1024  vsize 768  refresh: 70  vid: 19041
    [    24.228] (II) NOUVEAU(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
    [    24.228] (II) NOUVEAU(0): #3: hsize: 800  vsize 600  refresh: 60  vid: 16453
    [    24.228] (II) NOUVEAU(0): #4: hsize: 800  vsize 600  refresh: 70  vid: 19013
    [    24.228] (II) NOUVEAU(0): #5: hsize: 800  vsize 600  refresh: 75  vid: 20293
    [    24.228] (II) NOUVEAU(0): #6: hsize: 640  vsize 480  refresh: 60  vid: 16433
    [    24.228] (II) NOUVEAU(0): #7: hsize: 640  vsize 480  refresh: 75  vid: 20273
    [    24.229] (II) NOUVEAU(0): Supported detailed timing:
    [    24.229] (II) NOUVEAU(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
    [    24.229] (II) NOUVEAU(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
    [    24.229] (II) NOUVEAU(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
    [    24.229] (II) NOUVEAU(0): Serial No: 436
    [    24.229] (II) NOUVEAU(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 60 kHz, PixClock max 85 MHz
    [    24.229] (II) NOUVEAU(0): Monitor name: LCD MONITOR
    [    24.229] (II) NOUVEAU(0): EDID (in hex):
    [    24.229] (II) NOUVEAU(0): 	00ffffffffffff005c2e58019c050000
    [    24.229] (II) NOUVEAU(0): 	0c0d0103681e1778e8cf959d584e9026
    [    24.229] (II) NOUVEAU(0): 	215054bfee006140614a614f4540454a
    [    24.229] (II) NOUVEAU(0): 	454f3140314f64190040410026301888
    [    24.229] (II) NOUVEAU(0): 	360030e410000018000000ff00343336
    [    24.229] (II) NOUVEAU(0): 	00000000000000000000000000fd0037
    [    24.229] (II) NOUVEAU(0): 	4b1e3c08000a202020202020000000fc
    [    24.229] (II) NOUVEAU(0): 	004c4344204d4f4e49544f520a200016
    [    24.229] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [    24.229] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "800x600"x70.0   45.50  800 840 920 1040  600 601 604 625 -hsync +vsync (43.8 kHz)
    [    24.229] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
    [    24.229] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
    [    24.256] (II) NOUVEAU(0): EDID for output TV-1
    [    24.256] (II) NOUVEAU(0): Printing probed modes for output TV-1
    [    24.256] (II) NOUVEAU(0): Modeline "720x576"x50.0   28.66  720 776 856 960  576 576 588 597 -hsync -vsync (29.9 kHz eP)
    [    24.256] (II) NOUVEAU(0): Modeline "1024x768"x50.0   54.16  1024 1064 1200 1344  768 768 777 806 -hsync -vsync (40.3 kHz e)
    [    24.256] (II) NOUVEAU(0): Modeline "800x600"x50.0   32.14  800 840 920 1040  600 600 604 618 +hsync +vsync (30.9 kHz e)
    [    24.256] (II) NOUVEAU(0): Modeline "720x480"x50.0   25.20  720 752 872 960  480 480 493 525 -hsync -vsync (26.2 kHz e)
    [    24.256] (II) NOUVEAU(0): Modeline "640x480"x50.0   23.10  640 672 768 880  480 480 492 525 -hsync -vsync (26.2 kHz e)
    [    24.256] (II) NOUVEAU(0): Modeline "400x300"x100.0   20.10  400 432 496 640  300 300 303 314 doublescan +hsync +vsync (31.4 kHz e)
    [    24.256] (II) NOUVEAU(0): Modeline "320x240"x100.0   14.73  320 344 392 560  240 240 246 263 doublescan -hsync -vsync (26.3 kHz e)
    [    24.256] (II) NOUVEAU(0): Modeline "320x200"x100.0   12.32  320 344 392 560  200 200 202 220 doublescan -hsync -vsync (22.0 kHz e)
    [    24.256] (II) NOUVEAU(0): Output VGA-1 connected
    [    24.256] (II) NOUVEAU(0): Output TV-1 connected
    [    24.256] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
    [    24.256] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
    [    24.256] (II) NOUVEAU(0): Output TV-1 using initial mode 1024x768
    [    24.256] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [    24.256] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
    [    24.256] (**) NOUVEAU(0):  Driver mode "1024x768": 54.2 MHz (scaled from 0.0 MHz), 40.3 kHz, 50.0 Hz
    [    24.256] (II) NOUVEAU(0): Modeline "1024x768"x50.0   54.16  1024 1064 1200 1344  768 768 777 806 -hsync -vsync (40.3 kHz e)
    [    24.256] (**) NOUVEAU(0):  Driver mode "800x600": 32.1 MHz (scaled from 0.0 MHz), 30.9 kHz, 50.0 Hz
    [    24.256] (II) NOUVEAU(0): Modeline "800x600"x50.0   32.14  800 840 920 1040  600 600 604 618 +hsync +vsync (30.9 kHz e)
    [    24.256] (**) NOUVEAU(0):  Driver mode "720x480": 25.2 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
    [    24.256] (II) NOUVEAU(0): Modeline "720x480"x50.0   25.20  720 752 872 960  480 480 493 525 -hsync -vsync (26.2 kHz e)
    [    24.256] (**) NOUVEAU(0):  Driver mode "640x480": 23.1 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
    [    24.256] (II) NOUVEAU(0): Modeline "640x480"x50.0   23.10  640 672 768 880  480 480 492 525 -hsync -vsync (26.2 kHz e)
    [    24.256] (**) NOUVEAU(0):  Driver mode "400x300": 20.1 MHz (scaled from 0.0 MHz), 31.4 kHz, 100.0 Hz (D)
    [    24.256] (II) NOUVEAU(0): Modeline "400x300"x100.0   20.10  400 432 496 640  300 300 303 314 doublescan +hsync +vsync (31.4 kHz e)
    [    24.256] (**) NOUVEAU(0):  Driver mode "320x240": 14.7 MHz (scaled from 0.0 MHz), 26.3 kHz, 100.0 Hz (D)
    [    24.256] (II) NOUVEAU(0): Modeline "320x240"x100.0   14.73  320 344 392 560  240 240 246 263 doublescan -hsync -vsync (26.3 kHz e)
    [    24.256] (**) NOUVEAU(0):  Driver mode "320x200": 12.3 MHz (scaled from 0.0 MHz), 22.0 kHz, 100.0 Hz (D)
    [    24.256] (II) NOUVEAU(0): Modeline "320x200"x100.0   12.32  320 344 392 560  200 200 202 220 doublescan -hsync -vsync (22.0 kHz e)
    [    24.256] (**) NOUVEAU(0):  Driver mode "720x576": 28.7 MHz (scaled from 0.0 MHz), 29.9 kHz, 50.0 Hz
    [    24.257] (II) NOUVEAU(0): Modeline "720x576"x50.0   28.66  720 776 856 960  576 576 588 597 -hsync -vsync (29.9 kHz eP)
    [    24.257] (==) NOUVEAU(0): DPI set to (96, 96)
    [    24.257] (II) Loading sub module "fb"
    [    24.257] (II) LoadModule: "fb"
    [    24.257] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    24.257] (II) Module fb: vendor="X.Org Foundation"
    [    24.257] 	compiled for 1.13.3, module version = 1.0.0
    [    24.257] 	ABI class: X.Org ANSI C Emulation, version 0.4
    [    24.257] (II) Loading sub module "exa"
    [    24.257] (II) LoadModule: "exa"
    [    24.257] (II) Loading /usr/lib/xorg/modules/libexa.so
    [    24.307] (II) Module exa: vendor="X.Org Foundation"
    [    24.308] 	compiled for 1.13.3, module version = 2.6.0
    [    24.308] 	ABI class: X.Org Video Driver, version 13.1
    [    24.308] (II) Loading sub module "shadowfb"
    [    24.308] (II) LoadModule: "shadowfb"
    [    24.308] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [    24.400] (II) Module shadowfb: vendor="X.Org Foundation"
    [    24.400] 	compiled for 1.13.3, module version = 1.0.0
    [    24.400] 	ABI class: X.Org ANSI C Emulation, version 0.4
    [    24.400] (II) UnloadModule: "vesa"
    [    24.400] (II) Unloading vesa
    [    24.400] (II) UnloadModule: "modesetting"
    [    24.400] (II) Unloading modesetting
    [    24.400] (II) UnloadModule: "fbdev"
    [    24.401] (II) Unloading fbdev
    [    24.401] (II) UnloadSubModule: "fbdevhw"
    [    24.401] (II) Unloading fbdevhw
    [    24.401] (--) Depth 24 pixmap format is 32 bpp
    [    24.401] (II) NOUVEAU(0): Opened GPU channel 0
    [    24.402] (II) NOUVEAU(0): [DRI2] Setup complete
    [    24.402] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau_vieux
    [    24.402] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau_vieux
    [    24.402] (II) EXA(0): Driver allocated offscreen pixmaps
    [    24.402] (II) EXA(0): Driver registered support for the following operations:
    [    24.402] (II)         Solid
    [    24.402] (II)         Copy
    [    24.402] (II)         Composite (RENDER acceleration)
    [    24.402] (II)         UploadToScreen
    [    24.402] (II)         DownloadFromScreen
    [    24.402] (==) NOUVEAU(0): Backing store disabled
    [    24.402] (==) NOUVEAU(0): Silken mouse enabled
    [    24.402] (==) NOUVEAU(0): DPMS enabled
    [    24.402] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [    24.403] (--) RandR disabled
    [    24.414] (II) SELinux: Disabled on system
    [    25.099] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [    25.099] (II) AIGLX: enabled GLX_INTEL_swap_event
    [    25.099] (II) AIGLX: enabled GLX_ARB_create_context
    [    25.099] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [    25.099] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [    25.099] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [    25.099] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [    25.099] (II) AIGLX: Loaded and initialized nouveau_vieux
    [    25.099] (II) GLX: Initialized DRI2 GL provider for screen 0
    [    25.116] (II) NOUVEAU(0): NVEnterVT is called.
    [    25.245] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
    [    25.245] resize called 1024 768
    [    25.287] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
    [    25.292] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [    25.292] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    25.292] (II) LoadModule: "evdev"
    [    25.293] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    25.316] (II) Module evdev: vendor="X.Org Foundation"
    [    25.317] 	compiled for 1.13.3, module version = 2.7.3
    [    25.317] 	Module class: X.Org XInput Driver
    [    25.317] 	ABI class: X.Org XInput driver, version 18.0
    [    25.317] (II) Using input driver 'evdev' for 'Power Button'
    [    25.317] (**) Power Button: always reports core events
    [    25.317] (**) evdev: Power Button: Device: "/dev/input/event1"
    [    25.317] (--) evdev: Power Button: Vendor 0 Product 0x1
    [    25.317] (--) evdev: Power Button: Found keys
    [    25.317] (II) evdev: Power Button: Configuring as keyboard
    [    25.317] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [    25.317] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [    25.317] (**) Option "xkb_rules" "evdev"
    [    25.317] (**) Option "xkb_model" "pc105"
    [    25.317] (**) Option "xkb_layout" "es"
    [    25.321] (II) XKB: reuse xkmfile /var/lib/xkb/server-FFBD4FDC8093CCB415CD73029FDA64F4B077A3E7.xkm
    [    25.323] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [    25.323] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    25.323] (II) Using input driver 'evdev' for 'Power Button'
    [    25.323] (**) Power Button: always reports core events
    [    25.323] (**) evdev: Power Button: Device: "/dev/input/event0"
    [    25.323] (--) evdev: Power Button: Vendor 0 Product 0x1
    [    25.323] (--) evdev: Power Button: Found keys
    [    25.323] (II) evdev: Power Button: Configuring as keyboard
    [    25.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
    [    25.323] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [    25.323] (**) Option "xkb_rules" "evdev"
    [    25.323] (**) Option "xkb_model" "pc105"
    [    25.323] (**) Option "xkb_layout" "es"
    [    25.324] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
    [    25.324] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
    [    25.324] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
    [    25.324] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [    25.324] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [    25.324] (**) AT Translated Set 2 keyboard: always reports core events
    [    25.325] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
    [    25.325] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [    25.325] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [    25.325] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [    25.325] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
    [    25.325] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [    25.325] (**) Option "xkb_rules" "evdev"
    [    25.325] (**) Option "xkb_model" "pc105"
    [    25.325] (**) Option "xkb_layout" "es"
    [    25.326] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event3)
    [    25.326] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [    25.326] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
    [    25.326] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    [    25.326] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event3"
    [    25.326] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
    [    25.326] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    [    25.326] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    [    25.326] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
    [    25.326] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    [    25.326] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    [    25.326] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
    [    25.326] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    [    25.326] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    25.326] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event3"
    [    25.326] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)
    [    25.326] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
    [    25.326] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    [    25.326] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
    [    25.327] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
    [    25.327] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
    [    25.327] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
    [    25.327] (II) No input driver specified, ignoring this device.
    [    25.327] (II) This device may have been added with another device file.
    But I get graphic glitches all the time (like having menu icons and (>) losing their color randomly when moving around the alt+F1 menu), and most important, it ends up freezing the system after a couple of minutes fo use.
    I cannot post any error because they never get written in the log files. It is a major system freeze: no mouse, no keyboard, display is frozen, ctrl+alt+F1 won't give you a vterminal, no network (ssh stops, icmp stops responding), SysRq-keys do not work at all... All I can do is power cycle the system.

    From what I have read, my only option is the nouveau driver.
    The old nv driver is deprecated, and nvidia's closed driver no longer support the NV10s family cards. I could try the last version that supported my card: 96.43.23, but it needs X.Org xserver versions 1.11 and 1.12, and both ubuntu 12.10 and 13.04 are using xserver-xorg-core 1.13.

    Is there something I can do?

    My actual workaround is adding the nomodetest parameter to the kernel to have ubuntu pick the vesa driver (works fine, by the way, but limited to 800x600).

    PS.-
    It is a dual boot system, and the nvidia card seems to work just fine in the WindowsXP installation.
    Last edited by felichas; August 6th, 2013 at 01:25 AM.

  2. #2
    Join Date
    Apr 2014
    Location
    'Murica
    Beans
    33
    Distro
    Xubuntu

    Re: 12.10 / 13.04 + NVIDIA NV18 GeForce4 MX 440 + nouveau driver = gliches + freezes

    I think I'm having the same problem. Except that my system doesn't freeze up. I have the same graphics card, and I'm getting all these glitches. Mine is also a dual-boot with Xubuntu & Windows XP, and everything seems to work fine with Windows XP. Check out my post here: http://ubuntuforums.org/showthread.php?t=2222994

    Did you ever find a solution?

  3. #3
    Join Date
    Dec 2007
    Beans
    15

    Re: 12.10 / 13.04 + NVIDIA NV18 GeForce4 MX 440 + nouveau driver = gliches + freezes

    Quote Originally Posted by stretch4 View Post
    I think I'm having the same problem. Except that my system doesn't freeze up. I have the same graphics card, and I'm getting all these glitches. Mine is also a dual-boot with Xubuntu & Windows XP, and everything seems to work fine with Windows XP. Check out my post here: http://ubuntuforums.org/showthread.php?t=2222994

    Did you ever find a solution?
    Not really.
    The computer has been running lubuntu ever since but with vesa drivers, as I mention in my post, restricted to 800x600.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •