I am in the process of testing a couple of VDI solutions. Currently I'm testing QVD which runs on Ubuntu 12.04. I have followed their instructions to setup QVD but when I try to start a VM I receive errors in their log file. I have reached out for support but, of course unless you purchase the product, help is limited. So, I thought I would see if anyone here could shed some light on what's wrong with my setup.
The errors I'm getting seems to be related to the /etc/network/interfaces config iptables/ebtables. Here are the errors in /var/log/qvd/qvd.log:
2013/08/03 04:45:52 1695 DEBUG /usr/lib/qvd/lib/perl5/site_perl/5.14.2/QVD/HKD/VMHandler.pm 259 - deleting ebtables chain QVD_1_INPUT
2013/08/03 04:45:52 1695 ERROR /usr/lib/qvd/lib/perl5/site_perl/5.14.2/QVD/HKD/VMHandler.pm 262 - Unable to delete chain 'QVD_1_INPUT', rc: 16711680
2013/08/03 04:45:52 1695 DEBUG /usr/lib/qvd/lib/perl5/site_perl/5.14.2/QVD/HKD/VMHandler.pm 259 - deleting ebtables chain QVD_1_FORWARD
2013/08/03 04:45:52 1695 ERROR /usr/lib/qvd/lib/perl5/site_perl/5.14.2/QVD/HKD/VMHandler.pm 262 - Unable to delete chain 'QVD_1_FORWARD', rc: 16711680
/etc/network/interfaces:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.10
netmask 255.255.255.0
gateway 192.168.1.1
broadcast 192.168.1.255
dns-nameservers 192.168.1.1
auto qvdnet0
iface qvdnet0 inet static
pre-up brctl addbr qvdnet0
pre-up iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.1.10
pre-up iptables -t nat -A PREROUTING -d 192.168.1.10 -p tcp --dport 8443 -j DNAT --to-destination 192.168.1.20
post-down brctl delbr qvdnet0
address 192.168.1.20
netmask 255.255.255.0
Any help would be appreciated.
Thanks
Adv Reply
Bookmarks