Results 1 to 10 of 10

Thread: port 5060 not opened - cannot connect

  1. #1
    Join Date
    Oct 2010
    Location
    Internet Cafe
    Beans
    136
    Distro
    Ubuntu 11.04 Natty Narwhal

    port 5060 not opened - cannot connect

    I am installing Asterisk 11 and I am having some issues with the port. I have opened the port on the IPtable and my router also ha sport 5060 open. Everything looks like it is configured correctly. However when I attempt a SIP call to the server I cannot connect. I also used a telnet command from a computer on my LAN and I could not see 5060.

    Here is the information I have

    UBUNTU 11.10 information

    root@ubuntu-s2:/$ sudo netstat -plntu
    Active Internet connections (only servers)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1538/exim4
    tcp 0 0 192.168.1.185:3306 0.0.0.0:* LISTEN 931/mysqld
    tcp 0 0 0.0.0.0:2000 0.0.0.0:* LISTEN 10609/asterisk
    tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1623/apache2
    tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 807/sshd
    tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 779/cupsd
    tcp6 0 0 ::1:25 :::* LISTEN 1538/exim4
    tcp6 0 0 :::22 :::* LISTEN 807/sshd
    tcp6 0 0 ::1:631 :::* LISTEN 779/cupsd
    udp 0 0 0.0.0.0:40655 0.0.0.0:* 766/avahi-daemon: r
    udp 0 0 0.0.0.0:5353 0.0.0.0:* 766/avahi-daemon: r
    udp 0 0 0.0.0.0:5000 0.0.0.0:* 10698/asterisk
    udp 0 0 0.0.0.0:5000 0.0.0.0:* 10655/asterisk
    udp 0 0 0.0.0.0:5000 0.0.0.0:* 10609/asterisk
    udp 0 0 0.0.0.0:4520 0.0.0.0:* 10609/asterisk
    udp 0 0 0.0.0.0:5060 0.0.0.0:* 10698/asterisk
    udp 0 0 0.0.0.0:5060 0.0.0.0:* 10655/asterisk
    udp 0 0 0.0.0.0:5060 0.0.0.0:* 10609/asterisk
    udp 0 0 0.0.0.0:4569 0.0.0.0:* 10698/asterisk
    udp 0 0 0.0.0.0:4569 0.0.0.0:* 10655/asterisk
    udp 0 0 0.0.0.0:4569 0.0.0.0:* 10609/asterisk
    udp6 0 0 :::5353 :::* 766/avahi-daemon: r
    udp6 0 0 :::41416 :::* 766/avahi-daemon: r

    AS YOU CAN SEE 5060 IS LISTED AND ASSOCIATED WITH ASTERISK.
    The IPTABLE SHOWS THE FOLLOWING:

    ufw-track-input all -- 0.0.0.0/0 0.0.0.0/0
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5060
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5060
    ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5060
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpts:10000:20000


    WHEN I LOOK AT MY ROUTER I CAN SEE THE PORT IS OPEN. I have port 5060 open as a UDP port.


    WHEN I USE TELNET PORT 5060 IS NOT AVAILABLE. THE COMMAND I AM USING IS THE FOLLOWING:

    telnet 192.168.1.23 5060 and I cannot establish a connection.

    I also went to the following website to test the connection. http://www.overpie.com/web-tools/port-scanning-tool

    So why can I not establish a connection with my server?
    Last edited by spindler; June 27th, 2013 at 09:18 PM.

  2. #2
    Join Date
    Apr 2005
    Beans
    4,334
    Distro
    Ubuntu Development Release

    Re: port 5060 not opened - cannot connect

    Quote Originally Posted by spindler View Post
    I am installing Asterisk 11 and I am having some issues with the port. I have opened the port on the IPtable and my router also ha sport 5060 open. Everything looks like it is configured correctly. However when I attempt a SIP call to the server I cannot connect. I also used a telnet command from a computer on my LAN and I could not see 5060.

    Here is the information I have

    UBUNTU 11.10 information

    root@ubuntu-s2:/$ sudo netstat -plntu
    Active Internet connections (only servers)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1538/exim4
    tcp 0 0 192.168.1.185:3306 0.0.0.0:* LISTEN 931/mysqld
    tcp 0 0 0.0.0.0:2000 0.0.0.0:* LISTEN 10609/asterisk
    tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1623/apache2
    tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 807/sshd
    tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 779/cupsd
    tcp6 0 0 ::1:25 :::* LISTEN 1538/exim4
    tcp6 0 0 :::22 :::* LISTEN 807/sshd
    tcp6 0 0 ::1:631 :::* LISTEN 779/cupsd
    udp 0 0 0.0.0.0:40655 0.0.0.0:* 766/avahi-daemon: r
    udp 0 0 0.0.0.0:5353 0.0.0.0:* 766/avahi-daemon: r
    udp 0 0 0.0.0.0:5000 0.0.0.0:* 10698/asterisk
    udp 0 0 0.0.0.0:5000 0.0.0.0:* 10655/asterisk
    udp 0 0 0.0.0.0:5000 0.0.0.0:* 10609/asterisk
    udp 0 0 0.0.0.0:4520 0.0.0.0:* 10609/asterisk
    udp 0 0 0.0.0.0:5060 0.0.0.0:* 10698/asterisk
    udp 0 0 0.0.0.0:5060 0.0.0.0:* 10655/asterisk
    udp 0 0 0.0.0.0:5060 0.0.0.0:* 10609/asterisk
    udp 0 0 0.0.0.0:4569 0.0.0.0:* 10698/asterisk
    udp 0 0 0.0.0.0:4569 0.0.0.0:* 10655/asterisk
    udp 0 0 0.0.0.0:4569 0.0.0.0:* 10609/asterisk
    udp6 0 0 :::5353 :::* 766/avahi-daemon: r
    udp6 0 0 :::41416 :::* 766/avahi-daemon: r

    AS YOU CAN SEE 5060 IS LISTED AND ASSOCIATED WITH ASTERISK.
    The IPTABLE SHOWS THE FOLLOWING:

    ufw-track-input all -- 0.0.0.0/0 0.0.0.0/0
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5060
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5060
    ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5060
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpts:10000:20000


    WHEN I LOOK AT MY ROUTER I CAN SEE THE PORT IS OPEN. I have port 5060 open as a UDP port.


    WHEN I USE TELNET PORT 5060 IS NOT AVAILABLE. THE COMMAND I AM USING IS THE FOLLOWING:

    telnet 192.168.1.23 5060 and I cannot establish a connection.

    I also went to the following website to test the connection. http://www.overpie.com/web-tools/port-scanning-tool

    So why can I not establish a connection with my server?
    Here is my iptables config from my asty box.


    iptables -A INPUT -p udp -m udp --dport 5060 -j ACCEPT
    iptables -A INPUT -p udp -m udp --dport 4569 -j ACCEPT
    iptables -A INPUT -p udp -m udp --dport 5036 -j ACCEPT
    iptables -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT
    iptables -A INPUT -p udp -m udp --dport 2727 -j ACCEPT

    Your missing a couple of those.

  3. #3
    Join Date
    Oct 2010
    Location
    Internet Cafe
    Beans
    136
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: port 5060 not opened - cannot connect

    Quote Originally Posted by compiledkernel View Post
    Here is my iptables config from my asty box.


    iptables -A INPUT -p udp -m udp --dport 5060 -j ACCEPT
    iptables -A INPUT -p udp -m udp --dport 4569 -j ACCEPT
    iptables -A INPUT -p udp -m udp --dport 5036 -j ACCEPT
    iptables -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT
    iptables -A INPUT -p udp -m udp --dport 2727 -j ACCEPT

    Your missing a couple of those.
    Thanks. I was able to add those additional iptable values. However, I am still not able to communicate to the port. It is very weird. Here is my "COMPLETE" IP TABLE.

    Chain INPUT (policy DROP)
    target prot opt source destination
    ufw-before-logging-input all -- 0.0.0.0/0 0.0.0.0/0
    ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0
    ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0
    ufw-after-logging-input all -- 0.0.0.0/0 0.0.0.0/0
    ufw-reject-input all -- 0.0.0.0/0 0.0.0.0/0
    ufw-track-input all -- 0.0.0.0/0 0.0.0.0/0
    ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5060
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpts:10000:20000
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:4569
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:2727
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5036

    Chain FORWARD (policy DROP)
    target prot opt source destination
    ufw-before-logging-forward all -- 0.0.0.0/0 0.0.0.0/0
    ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0
    ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0
    ufw-after-logging-forward all -- 0.0.0.0/0 0.0.0.0/0
    ufw-reject-forward all -- 0.0.0.0/0 0.0.0.0/0

    Chain OUTPUT (policy ACCEPT)
    target prot opt source destination
    ufw-before-logging-output all -- 0.0.0.0/0 0.0.0.0/0
    ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0
    ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0
    ufw-after-logging-output all -- 0.0.0.0/0 0.0.0.0/0
    ufw-reject-output all -- 0.0.0.0/0 0.0.0.0/0
    ufw-track-output all -- 0.0.0.0/0 0.0.0.0/0

    Chain ufw-after-forward (1 references)
    target prot opt source destination

    Chain ufw-after-input (1 references)
    target prot opt source destination
    ufw-skip-to-policy-input udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137
    ufw-skip-to-policy-input udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138
    ufw-skip-to-policy-input tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139
    ufw-skip-to-policy-input tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445
    ufw-skip-to-policy-input udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67
    ufw-skip-to-policy-input udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68
    ufw-skip-to-policy-input all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST

    Chain ufw-after-logging-forward (1 references)
    target prot opt source destination
    LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK] '

    Chain ufw-after-logging-input (1 references)
    target prot opt source destination
    LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK] '

    Chain ufw-after-logging-output (1 references)
    target prot opt source destination

    Chain ufw-after-output (1 references)
    target prot opt source destination

    Chain ufw-before-forward (1 references)
    target prot opt source destination
    ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0

    Chain ufw-before-input (1 references)
    target prot opt source destination
    ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
    ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
    ufw-logging-deny all -- 0.0.0.0/0 0.0.0.0/0 state INVALID
    DROP all -- 0.0.0.0/0 0.0.0.0/0 state INVALID
    ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3
    ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4
    ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11
    ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12
    ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:67 dpt:68
    ufw-not-local all -- 0.0.0.0/0 0.0.0.0/0
    ACCEPT udp -- 0.0.0.0/0 224.0.0.251 udp dpt:5353
    ACCEPT udp -- 0.0.0.0/0 239.255.255.250 udp dpt:1900
    ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0

    Chain ufw-before-logging-forward (1 references)
    target prot opt source destination

    Chain ufw-before-logging-input (1 references)
    target prot opt source destination

    Chain ufw-before-logging-output (1 references)
    target prot opt source destination

    Chain ufw-before-output (1 references)
    target prot opt source destination
    ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
    ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
    ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0

    Chain ufw-logging-allow (0 references)
    target prot opt source destination
    LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW ALLOW] '

    Chain ufw-logging-deny (2 references)
    target prot opt source destination
    RETURN all -- 0.0.0.0/0 0.0.0.0/0 state INVALID limit: avg 3/min burst 10
    LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK] '

    Chain ufw-not-local (1 references)
    target prot opt source destination
    RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL
    RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type MULTICAST
    RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST
    ufw-logging-deny all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10
    DROP all -- 0.0.0.0/0 0.0.0.0/0

    Chain ufw-reject-forward (1 references)
    target prot opt source destination

    Chain ufw-reject-input (1 references)
    target prot opt source destination

    Chain ufw-reject-output (1 references)
    target prot opt source destination

    Chain ufw-skip-to-policy-forward (0 references)
    target prot opt source destination
    DROP all -- 0.0.0.0/0 0.0.0.0/0

    Chain ufw-skip-to-policy-input (7 references)
    target prot opt source destination
    DROP all -- 0.0.0.0/0 0.0.0.0/0

    Chain ufw-skip-to-policy-output (0 references)
    target prot opt source destination
    ACCEPT all -- 0.0.0.0/0 0.0.0.0/0

    Chain ufw-track-input (1 references)
    target prot opt source destination

    Chain ufw-track-output (1 references)
    target prot opt source destination
    ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW

    Chain ufw-user-forward (1 references)
    target prot opt source destination

    Chain ufw-user-input (1 references)
    target prot opt source destination
    ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:80
    DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20
    DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:20
    DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21
    DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:21
    ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22
    DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25
    DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:25
    ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:8080
    ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:443
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5060
    ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5060
    ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5060

    Chain ufw-user-limit (0 references)
    target prot opt source destination
    LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 5 LOG flags 0 level 4 prefix `[UFW LIMIT BLOCK] '
    REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable

    Chain ufw-user-limit-accept (0 references)
    target prot opt source destination
    ACCEPT all -- 0.0.0.0/0 0.0.0.0/0

    Chain ufw-user-logging-forward (0 references)
    target prot opt source destination

    Chain ufw-user-logging-input (0 references)
    target prot opt source destination

    Chain ufw-user-logging-output (0 references)
    target prot opt source destination

    Chain ufw-user-output (1 references)
    target prot opt source destination

  4. #4
    Join Date
    Apr 2005
    Beans
    4,334
    Distro
    Ubuntu Development Release

    Re: port 5060 not opened - cannot connect

    I need more than a few minutes to disseminate that.

    Question: So when you attempt a call you dont get anything in asterisk's logs, and your not generating CDRs in /var/log/asterisk/cdr-csv?
    Last edited by compiledkernel; June 27th, 2013 at 11:44 PM.

  5. #5
    Join Date
    Oct 2010
    Location
    Internet Cafe
    Beans
    136
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: port 5060 not opened - cannot connect

    I do not think I am connecting to the server. There are no log messages and when I use a port testing tool I do not see port 5060 is open.

  6. #6
    Join Date
    Apr 2005
    Beans
    4,334
    Distro
    Ubuntu Development Release

    Re: port 5060 not opened - cannot connect

    Whats between you and the asterisk instance?

  7. #7
    Join Date
    Oct 2010
    Location
    Internet Cafe
    Beans
    136
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: port 5060 not opened - cannot connect

    I am running Zoiper (a VOIP softphone) on a mac computer. This computer is connected to a wireless gateway via wifi. The server is connect to this gateway via ethernet. The server is running Ubuntu 11.10.
    On the server I am running Asterix.

    When I call the asterisk server using Zoiper the phone cannot be register.
    When I test the ports using telnet from the MAC I can see that port 80 and 22 are open. Port 5060 is closed.

    The gateway has many ports open including 80,22,5060(udp) and 10000-20000.

    The gateway also has access to the internet. When I use the port testing tool http://www.yougetsignal.com/tools/open-ports/ I can see that port 80,22 are open. Ports 5060 and 10000-20000 are closed.

  8. #8
    Join Date
    Oct 2010
    Location
    Internet Cafe
    Beans
    136
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: port 5060 not opened - cannot connect

    I am also running ufw.

    80 ALLOW Anywhere
    20 DENY Anywhere
    21 DENY Anywhere
    22 ALLOW Anywhere
    25 DENY Anywhere
    8080 ALLOW Anywhere
    443 ALLOW Anywhere
    5060/udp ALLOW Anywhere
    5060 ALLOW Anywhere
    8080 ALLOW Anywhere (v6)
    443 ALLOW Anywhere (v6)
    5060/udp ALLOW Anywhere (v6)
    5060 ALLOW Anywhere (v6)

  9. #9
    Join Date
    Oct 2010
    Location
    Internet Cafe
    Beans
    136
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: port 5060 not opened - cannot connect

    I replaced my router(gateway) with a network switch(Dynex model DX-ESW5) to eliminate any concerns with my router. I connected my MAC computer to the switch with a Ethernet cable and the Server to the same switch with an Ethernet cable. Using telnet on a terminal I was able to duplicate the error using the switch so I am 100% sure there is something wrong with the Ubuntu Server.

    Port 5060 on my Ubuntu machine is not open. Very weird......


    Any help you can give would be appreciated.
    Last edited by spindler; June 28th, 2013 at 04:40 PM.

  10. #10
    Join Date
    Oct 2010
    Location
    Internet Cafe
    Beans
    136
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: port 5060 not opened - cannot connect

    Learning new things is always good. After pocking around the internet I found some information about UDP ports..... Telnet does not test UDP ports very well. Here is the link I read.

    http://adityo.blog.binusian.org/?p=787

    Using this information. I downloaded nmap onto my MAC computer.

    http://nmap.org/download.html#macosx

    Then I used nmap to probe port 5060 of my server. I got back the following:


    USING MY EXTERNAL IP ADDRESS

    Chriss-MacBook-Air:~ chris$ sudo nmap -p 5060 -sU -P0 XXX.XXX.XXX.XXX

    Starting Nmap 6.25 ( http://nmap.org ) at 2013-06-28 16:18 MDT
    Nmap scan report for S0106.xxxxxx.net (XXX.XXX.XXX.XXX)
    Host is up.
    PORT STATE SERVICE
    5060/udp open|filtered sip

    THIS SHOWS THAT PORT 5060 IS OPEN!

    NOW WHEN I CHECK USING AN INTERAL IP ADDRESS.


    Chriss-MacBook-Air:~ chris$ sudo nmap -p 5060 -sU -P0 192.168.1.185

    Starting Nmap 6.25 ( http://nmap.org ) at 2013-06-28 16:18 MDT
    Nmap scan report for 192.168.1.185
    Host is up (0.0022s latency).
    PORT STATE SERVICE
    5060/udp closed sip
    MAC Address: 00:15:C5:5E:EE8 (Dell)


    THIS SHOWS PORT 5060 IS CLOSED.

    This is very weird. I need to go for a walk.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •