Results 1 to 4 of 4

Thread: 13.04

  1. #1
    Join Date
    May 2013
    Beans
    1

    13.04

    After installation Ubuntu logo apear and nothing happend.
    What's wrong?

    My boot info script results:

    Code:
                      Boot Info Script 0.61      [1 April 2012]
    
    
    ============================= Boot Info Summary: ===============================
    
     => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of 
        the same hard drive for core.img. core.img is at this location and looks 
        in partition 94 for .
     => Windows is installed in the MBR of /dev/sdb.
     => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
    
    sda1: __________________________________________________________________________
    
        File system:       ext2
        Boot sector type:  -
        Boot sector info: 
        Operating System:  Ubuntu 13.04
        Boot files:        /boot/grub/grub.cfg /etc/fstab
    
    sda2: __________________________________________________________________________
    
        File system:       ext4
        Boot sector type:  -
        Boot sector info: 
        Operating System:  
        Boot files:        
    
    sdb1: __________________________________________________________________________
    
        File system:       ntfs
        Boot sector type:  Windows Vista/7: NTFS
        Boot sector info:  No errors found in the Boot Parameter Block.
        Operating System:  
        Boot files:        
    
    sdb2: __________________________________________________________________________
    
        File system:       Extended Partition
        Boot sector type:  -
        Boot sector info: 
    
    sdb5: __________________________________________________________________________
    
        File system:       ntfs
        Boot sector type:  Windows Vista/7: NTFS
        Boot sector info:  According to the info in the boot sector, sdb5 starts 
                           at sector 63.
        Operating System:  
        Boot files:        
    
    sdb6: __________________________________________________________________________
    
        File system:       ntfs
        Boot sector type:  Windows Vista/7: NTFS
        Boot sector info:  According to the info in the boot sector, sdb6 starts 
                           at sector 63.
        Operating System:  
        Boot files:        
    
    sdb7: __________________________________________________________________________
    
        File system:       ntfs
        Boot sector type:  Windows Vista/7: NTFS
        Boot sector info:  According to the info in the boot sector, sdb7 starts 
                           at sector 63.
        Operating System:  
        Boot files:        
    
    sdc1: __________________________________________________________________________
    
        File system:       vfat
        Boot sector type:  SYSLINUX 4.06 2012-10-23
        Boot sector info:  Syslinux looks at sector 31224 of /dev/sdc1 for its 
                           second stage. SYSLINUX is installed in the  directory. 
                           The integrity check of the ADV area failed. No errors 
                           found in the Boot Parameter Block.
        Operating System:  
        Boot files:        /syslinux/syslinux.cfg /ldlinux.sys
    
    ============================ Drive/Partition Info: =============================
    
    Drive: sda _____________________________________________________________________
    
    Disk /dev/sda: 160.0 GB, 160040803840 bytes
    255 heads, 63 sectors/track, 19457 cylinders, total 312579695 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    
    Partition  Boot  Start Sector    End Sector  # of Sectors  Id System
    
    /dev/sda1    *          2,048    40,962,047    40,960,000  83 Linux
    /dev/sda2          40,962,048   312,578,047   271,616,000  83 Linux
    
    
    Drive: sdb _____________________________________________________________________
    
    Disk /dev/sdb: 160.0 GB, 160041885696 bytes
    255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    
    Partition  Boot  Start Sector    End Sector  # of Sectors  Id System
    
    /dev/sdb1                  63    71,874,809    71,874,747   7 NTFS / exFAT / HPFS
    /dev/sdb2          71,888,833   312,560,639   240,671,807   f W95 Extended (LBA)
    /dev/sdb5          71,888,896    72,912,895     1,024,000   7 NTFS / exFAT / HPFS
    /dev/sdb6          72,914,944   122,879,999    49,965,056   7 NTFS / exFAT / HPFS
    /dev/sdb7         122,881,248   312,560,639   189,679,392   7 NTFS / exFAT / HPFS
    
    
    Drive: sdc _____________________________________________________________________
    
    Disk /dev/sdc: 4105 MB, 4105175040 bytes
    37 heads, 37 sectors/track, 5856 cylinders, total 8017920 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    
    Partition  Boot  Start Sector    End Sector  # of Sectors  Id System
    
    /dev/sdc1    *          2,760     8,017,919     8,015,160   c W95 FAT32 (LBA)
    
    
    "blkid" output: ________________________________________________________________
    
    Device           UUID                                   TYPE       LABEL
    
    /dev/loop0                                              squashfs   
    /dev/sda1        59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6   ext2       
    /dev/sda2        8dedfbd7-fa18-41fb-be37-138eb94c19ab   ext4       
    /dev/sdb1        7DED640C46F98C60                       ntfs       New Volume
    /dev/sdb5        D0308E34308E2218                       ntfs       
    /dev/sdb6        1818CCB818CC9662                       ntfs       
    /dev/sdb7        6AF499A4F49972D5                       ntfs       
    /dev/sdc1        1EF2-3A5B                              vfat       PENDRIVE
    /dev/sr0                                                iso9660    Ubuntu 13.04 i386
    
    ================================ Mount points: =================================
    
    Device           Mount_Point              Type       Options
    
    /dev/loop0       /rofs                    squashfs   (ro,noatime)
    /dev/sda1        /media/ubuntu/59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6 ext2       (rw,nosuid,nodev,uhelper=udisks2)
    /dev/sda2        /media/ubuntu/8dedfbd7-fa18-41fb-be37-138eb94c19ab ext4       (rw,nosuid,nodev,uhelper=udisks2)
    /dev/sdb5        /media/ubuntu/D0308E34308E2218 fuseblk    (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
    /dev/sdb6        /media/ubuntu/1818CCB818CC9662 fuseblk    (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
    /dev/sdb7        /media/ubuntu/6AF499A4F49972D5 fuseblk    (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
    /dev/sdc1        /media/ubuntu/PENDRIVE   vfat       (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
    /dev/sr0         /cdrom                   iso9660    (ro,noatime)
    
    
    =========================== sda1/boot/grub/grub.cfg: ===========================
    
    --------------------------------------------------------------------------------
    #
    # DO NOT EDIT THIS FILE
    #
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    #
    
    ### BEGIN /etc/grub.d/00_header ###
    if [ -s $prefix/grubenv ]; then
      set have_grubenv=true
      load_env
    fi
    set default="0"
    
    if [ x"${feature_menuentry_id}" = xy ]; then
      menuentry_id_option="--id"
    else
      menuentry_id_option=""
    fi
    
    export menuentry_id_option
    
    if [ "${prev_saved_entry}" ]; then
      set saved_entry="${prev_saved_entry}"
      save_env saved_entry
      set prev_saved_entry=
      save_env prev_saved_entry
      set boot_once=true
    fi
    
    function savedefault {
      if [ -z "${boot_once}" ]; then
        saved_entry="${chosen}"
        save_env saved_entry
      fi
    }
    
    function recordfail {
      set recordfail=1
      if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
    }
    
    function load_video {
      if [ x$feature_all_video_module = xy ]; then
        insmod all_video
      else
        insmod efi_gop
        insmod efi_uga
        insmod ieee1275_fb
        insmod vbe
        insmod vga
        insmod video_bochs
        insmod video_cirrus
      fi
    }
    
    if [ x$feature_default_font_path = xy ] ; then
       font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
    else
      search --no-floppy --fs-uuid --set=root 59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
    fi
        font="/usr/share/grub/unicode.pf2"
    fi
    
    if loadfont $font ; then
      set gfxmode=auto
      load_video
      insmod gfxterm
      set locale_dir=$prefix/locale
      set lang=pl_PL
      insmod gettext
    fi
    terminal_output gfxterm
    if [ "${recordfail}" = 1 ]; then
      set timeout=-1
    else
      set timeout=10
    fi
    ### END /etc/grub.d/00_header ###
    
    ### BEGIN /etc/grub.d/05_debian_theme ###
    set menu_color_normal=white/black
    set menu_color_highlight=black/light-gray
    if background_color 44,0,30; then
      clear
    fi
    ### END /etc/grub.d/05_debian_theme ###
    
    ### BEGIN /etc/grub.d/10_linux ###
    function gfxmode {
        set gfxpayload="${1}"
        if [ "${1}" = "keep" ]; then
            set vt_handoff=vt.handoff=7
        else
            set vt_handoff=
        fi
    }
    if [ "${recordfail}" != 1 ]; then
      if [ -e ${prefix}/gfxblacklist.txt ]; then
        if hwmatch ${prefix}/gfxblacklist.txt 3; then
          if [ ${match} = 0 ]; then
            set linux_gfx_mode=keep
          else
            set linux_gfx_mode=text
          fi
        else
          set linux_gfx_mode=text
        fi
      else
        set linux_gfx_mode=keep
      fi
    else
      set linux_gfx_mode=text
    fi
    export linux_gfx_mode
    menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6' {
    recordfail
        load_video
        gfxmode $linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos1'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
        else
          search --no-floppy --fs-uuid --set=root 59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
        fi
        linux    /boot/vmlinuz-3.8.0-21-generic root=/dev/sda1 ro   quiet splash $vt_handoff
        initrd    /boot/initrd.img-3.8.0-21-generic
    }
    submenu 'Opcje zaawansowane dla systemu Ubuntu' $menuentry_id_option 'gnulinux-advanced-59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6' {
        menuentry 'Ubuntu, za pomocą systemu Linux 3.8.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-21-generic-advanced-59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6' {
        recordfail
            load_video
            gfxmode $linux_gfx_mode
            insmod gzio
            insmod part_msdos
            insmod ext2
            set root='hd0,msdos1'
            if [ x$feature_platform_search_hint = xy ]; then
              search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
            else
              search --no-floppy --fs-uuid --set=root 59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
            fi
            echo    'Wczytywanie systemu Linux 3.8.0-21-generic...'
            linux    /boot/vmlinuz-3.8.0-21-generic root=/dev/sda1 ro   quiet splash $vt_handoff
            echo    'Wczytywanie początkowego dysku RAM...'
            initrd    /boot/initrd.img-3.8.0-21-generic
        }
        menuentry 'Ubuntu, za pomocą systemu Linux 3.8.0-21-generic (tryb ratunkowy)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-21-generic-recovery-59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6' {
        recordfail
            load_video
            insmod gzio
            insmod part_msdos
            insmod ext2
            set root='hd0,msdos1'
            if [ x$feature_platform_search_hint = xy ]; then
              search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
            else
              search --no-floppy --fs-uuid --set=root 59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
            fi
            echo    'Wczytywanie systemu Linux 3.8.0-21-generic...'
            linux    /boot/vmlinuz-3.8.0-21-generic root=/dev/sda1 ro recovery nomodeset 
            echo    'Wczytywanie początkowego dysku RAM...'
            initrd    /boot/initrd.img-3.8.0-21-generic
        }
        menuentry 'Ubuntu, za pomocą systemu Linux 3.8.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-advanced-59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6' {
        recordfail
            load_video
            gfxmode $linux_gfx_mode
            insmod gzio
            insmod part_msdos
            insmod ext2
            set root='hd0,msdos1'
            if [ x$feature_platform_search_hint = xy ]; then
              search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
            else
              search --no-floppy --fs-uuid --set=root 59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
            fi
            echo    'Wczytywanie systemu Linux 3.8.0-19-generic...'
            linux    /boot/vmlinuz-3.8.0-19-generic root=/dev/sda1 ro   quiet splash $vt_handoff
            echo    'Wczytywanie początkowego dysku RAM...'
            initrd    /boot/initrd.img-3.8.0-19-generic
        }
        menuentry 'Ubuntu, za pomocą systemu Linux 3.8.0-19-generic (tryb ratunkowy)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-recovery-59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6' {
        recordfail
            load_video
            insmod gzio
            insmod part_msdos
            insmod ext2
            set root='hd0,msdos1'
            if [ x$feature_platform_search_hint = xy ]; then
              search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
            else
              search --no-floppy --fs-uuid --set=root 59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
            fi
            echo    'Wczytywanie systemu Linux 3.8.0-19-generic...'
            linux    /boot/vmlinuz-3.8.0-19-generic root=/dev/sda1 ro recovery nomodeset 
            echo    'Wczytywanie początkowego dysku RAM...'
            initrd    /boot/initrd.img-3.8.0-19-generic
        }
    }
    
    ### END /etc/grub.d/10_linux ###
    
    ### BEGIN /etc/grub.d/20_linux_xen ###
    
    ### END /etc/grub.d/20_linux_xen ###
    
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    menuentry "Memory test (memtest86+)" {
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos1'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
        else
          search --no-floppy --fs-uuid --set=root 59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
        fi
        linux16    /boot/memtest86+.bin
    }
    menuentry "Memory test (memtest86+, serial console 115200)" {
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos1'
        if [ x$feature_platform_search_hint = xy ]; then
          search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
        else
          search --no-floppy --fs-uuid --set=root 59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6
        fi
        linux16    /boot/memtest86+.bin console=ttyS0,115200n8
    }
    ### END /etc/grub.d/20_memtest86+ ###
    
    ### BEGIN /etc/grub.d/30_os-prober ###
    if [ "x${timeout}" != "x-1" ]; then
      if keystatus; then
        if keystatus --shift; then
          set timeout=-1
        else
          set timeout=0
        fi
      else
        if sleep --interruptible 3 ; then
          set timeout=0
        fi
      fi
    fi
    ### END /etc/grub.d/30_os-prober ###
    
    ### BEGIN /etc/grub.d/30_uefi-firmware ###
    ### END /etc/grub.d/30_uefi-firmware ###
    
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries.  Simply type the
    # menu entries you want to add after this comment.  Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f  ${config_directory}/custom.cfg ]; then
      source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
      source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    --------------------------------------------------------------------------------
    
    =============================== sda1/etc/fstab: ================================
    
    --------------------------------------------------------------------------------
    # /etc/fstab: static file system information.
    #
    # Use 'blkid' to print the universally unique identifier for a
    # device; this may be used with UUID= as a more robust way to name devices
    # that works even if disks are added and removed. See fstab(5).
    #
    # <file system> <mount point>   <type>  <options>       <dump>  <pass>
    # / was on /dev/sda1 during installation
    UUID=59fef86e-34ed-4eb8-8f0a-3e1f0ab6ecd6 /               ext2    errors=remount-ro 0       1
    # /home was on /dev/sda2 during installation
    UUID=8dedfbd7-fa18-41fb-be37-138eb94c19ab /home           ext4    defaults        0       2
    --------------------------------------------------------------------------------
    
    =================== sda1: Location of files loaded by Grub: ====================
    
               GiB - GB             File                                 Fragment(s)
    
                   =                boot/grub/grub.cfg                             1
                   =                boot/initrd.img-3.8.0-19-generic               9
                   =                boot/initrd.img-3.8.0-21-generic               7
                   =                boot/vmlinuz-3.8.0-19-generic                  3
                   =                boot/vmlinuz-3.8.0-21-generic                  3
                   =                initrd.img                                     9
                   =                vmlinuz                                        3
    
    ========================= sdc1/syslinux/syslinux.cfg: ==========================
    
    --------------------------------------------------------------------------------
    # D-I config version 2.0
    include menu.cfg
    default vesamenu.c32
    prompt 0
    timeout 50
    ui gfxboot bootlogo
    --------------------------------------------------------------------------------
    
    ================= sdc1: Location of files loaded by Syslinux: ==================
    
               GiB - GB             File                                 Fragment(s)
    
                ?? = ??             ldlinux.sys                                    1
                ?? = ??             syslinux/chain.c32                             1
                ?? = ??             syslinux/gfxboot.c32                           1
                ?? = ??             syslinux/menu.c32                              1
                ?? = ??             syslinux/syslinux.cfg                          1
                ?? = ??             syslinux/vesamenu.c32                          1
    
    ============== sdc1: Version of COM32(R) files used by Syslinux: ===============
    
     syslinux/chain.c32                 :  COM32R module (v4.xx)
     syslinux/gfxboot.c32               :  COM32R module (v4.xx)
     syslinux/menu.c32                  :  COM32R module (v4.xx)
     syslinux/vesamenu.c32              :  COM32R module (v4.xx)
    
    =============================== StdErr Messages: ===============================
    
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    awk: cmd. line:36: Math support is not compiled in
    /home/ubuntu/Pobrane/bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
      No volume groups found

  2. #2
    Join Date
    Dec 2008
    Location
    England
    Beans
    131
    Distro
    Ubuntu Gnome

    Re: 13.04

    The Ext2 file system is from before my time but i'd be surprised if 13.04 works on it. Try reinstalling onto sda again but have ext4 for all the files including /.

  3. #3
    Join Date
    Jun 2008
    Location
    Ballard
    Beans
    2,329
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: 13.04

    I don't think it matters that grub is on an ext2 partition. Others might have more to say on that.

    This looks to be a multi-boot system, yes? After you have installed Ubuntu you may need to run sudo update-grub from a terminal (using the LiveCD if no other terminal option is available).
    "We're all in this together, kid." --H. Tuttle (a.k.a. H. Buttle)
    "Maybe it's a layer 8 problem." --thatguruguy
    A High-Tech Blech!

  4. #4
    Join Date
    Feb 2012
    Beans
    396

    Re: 13.04


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •