Results 1 to 7 of 7

Thread: Domain in redirect loop

  1. #1
    Join Date
    Jan 2008
    Beans
    42

    Domain in redirect loop

    I am running unbuntu 10.0.4.1 and I setup a virtual site and it was working but now i'm getting a redirect loop when I open it in a broswer.
    I double checked everything and I can't see where the error is. So I need a second set of eye to cover over everything to see if I missed something.
    I"ll paste the conf files here. I am running apache2 version 2.2.14

    apache2.conf

    #
    # Based upon the NCSA server configuration files originally by Rob McCool.
    #
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See http://httpd.apache.org/docs/2.2/ for detailed information about
    # the directives.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    #
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
    # with ServerRoot set to "" will be interpreted by the
    # server as "//var/log/apache2/foo.log".
    #

    ### Section 1: Global Environment
    #
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    #

    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation (available
    # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
    # you will save yourself a lot of trouble.
    #
    # Do NOT add a slash at the end of the directory path.
    #
    ServerRoot "/etc/apache2"

    #
    # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
    #
    #<IfModule !mpm_winnt.c>
    #<IfModule !mpm_netware.c>
    LockFile /var/lock/apache2/accept.lock
    #</IfModule>
    #</IfModule>

    #
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    # This needs to be set in /etc/apache2/envvars
    #
    PidFile ${APACHE_PID_FILE}

    #
    # Timeout: The number of seconds before receives and sends time out.
    #
    Timeout 300

    #
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    #
    KeepAlive On

    #
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    #
    MaxKeepAliveRequests 100

    #
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    #
    KeepAliveTimeout 15

    ##
    ## Server-Pool Size Regulation (MPM specific)
    ##

    # prefork MPM
    # StartServers: number of server processes to start
    # MinSpareServers: minimum number of server processes which are kept spare
    # MaxSpareServers: maximum number of server processes which are kept spare
    # MaxClients: maximum number of server processes allowed to start
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule mpm_prefork_module>
    StartServers 5
    MinSpareServers 5
    MaxSpareServers 10
    MaxClients 150
    MaxRequestsPerChild 0
    </IfModule>

    # worker MPM
    # StartServers: initial number of server processes to start
    # MaxClients: maximum number of simultaneous client connections
    # MinSpareThreads: minimum number of worker threads which are kept spare
    # MaxSpareThreads: maximum number of worker threads which are kept spare
    # ThreadsPerChild: constant number of worker threads in each server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule mpm_worker_module>
    StartServers 2
    MinSpareThreads 25
    MaxSpareThreads 75
    ThreadLimit 64
    ThreadsPerChild 25
    MaxClients 150
    MaxRequestsPerChild 0
    </IfModule>

    # event MPM
    # StartServers: initial number of server processes to start
    # MaxClients: maximum number of simultaneous client connections
    # MinSpareThreads: minimum number of worker threads which are kept spare
    # MaxSpareThreads: maximum number of worker threads which are kept spare
    # ThreadsPerChild: constant number of worker threads in each server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule mpm_event_module>
    StartServers 2
    MaxClients 150
    MinSpareThreads 25
    MaxSpareThreads 75
    ThreadLimit 64
    ThreadsPerChild 25
    MaxRequestsPerChild 0
    </IfModule>

    # These need to be set in /etc/apache2/envvars
    User ${APACHE_RUN_USER}
    Group ${APACHE_RUN_GROUP}

    #
    # AccessFileName: The name of the file to look for in each directory
    # for additional configuration directives. See also the AllowOverride
    # directive.
    #

    AccessFileName .htaccess

    #
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    #
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy all
    </Files>

    #
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain


    #
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    #
    HostnameLookups Off

    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog /var/log/apache2/error.log

    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn

    # Include module configuration:
    Include /etc/apache2/mods-enabled/*.load
    Include /etc/apache2/mods-enabled/*.conf

    # Include all the user configurations:
    Include /etc/apache2/httpd.conf

    # Include ports listing
    Include /etc/apache2/ports.conf

    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
    #
    LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
    LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %O" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent

    #
    # Define an access log for VirtualHosts that don't define their own logfile
    CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined


    # Include of directories ignores editors' and dpkg's backup files,
    # see README.Debian for details.

    # Include generic snippets of statements
    Include /etc/apache2/conf.d/

    # Include the virtual host configurations:
    Include /etc/apache2/sites-enabled/
    Ports.conf
    Code:
    # If you just change the port or add more ports here, you will likely also
    # have to change the VirtualHost statement in
    # /etc/apache2/sites-enabled/000-default
    # This is also true if you have upgraded from before 2.2.9-3 (i.e. from
    # Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and
    # README.Debian.gz
    
    
    Listen 80
    
    
    
    <IfModule mod_ssl.c>
        # If you add NameVirtualHost *:443 here, you will also have to change
        # the VirtualHost statement in /etc/apache2/sites-available/default-ssl
        # to <VirtualHost *:443>
        # Server Name Indication for SSL named virtual hosts is currently not
        # supported by MSIE on Windows XP.
        Listen 443
    </IfModule>
    
    <IfModule mod_gnutls.c>
        Listen 443
    </IfModule>
    
    Listen 12322
    httpd.conf
    # JRun Settings
    LoadModule jrun_module /opt/coldfusion/runtime/lib/wsconfig/1/mod_jrun22.so
    <IfModule mod_jrun22.c>
    JRunConfig Verbose false
    JRunConfig Apialloc false
    JRunConfig Ignoresuffixmap false
    JRunConfig Serverstore /opt/coldfusion/runtime/lib/wsconfig/1/jrunserver.store
    JRunConfig Bootstrap 127.0.0.1:51800
    #JRunConfig Errorurl url <optionally redirect to this URL on errors>
    #JRunConfig ProxyRetryInterval 600 <number of seconds to wait before trying to reconnect to unreachable clustered server>
    #JRunConfig ConnectTimeout 15 <number of seconds to wait on a socket connect to a jrun server>
    #JRunConfig RecvTimeout 300 <number of seconds to wait on a socket receive to a jrun server>
    #JRunConfig SendTimeout 15 <number of seconds to wait on a socket send to a jrun server>
    AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
    </IfModule>
    <Files ~ ".hbmxml$">
    Order allow,deny
    Deny from all
    </Files>
    ServerName localhost
    <IfModule alias_module>
    Alias /CFIDE /var/www/CFIDE
    Alias /cfide /var/www/CFIDE
    </IfModule>


    NameVirtualHost *:80

    <virtualhost *:80>

    ServerAdmin xxx@comcast.net
    ServerName xxxyregistry.com
    ServerAlias www.xxxyregistry.com

    DirectoryIndex index.cfm

    DocumentRoot /var/www/nearby/
    </virtualhost>


    Thanks!

  2. #2
    Join Date
    Jan 2008
    Beans
    42

    Re: Domain in redirect loop

    So I was tinkering around with the confs and now when i go to the site I get a directory listing prohibited error.

    Any ideas?
    THanks

  3. #3
    Join Date
    Jun 2007
    Location
    Porirua, New Zealand
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: Domain in redirect loop

    Quote Originally Posted by mcraul View Post
    So I was tinkering around with the confs and now when i go to the site I get a directory listing prohibited error.

    Any ideas?
    THanks
    Do you have a file index.html or index.php in the directory you were viewing?
    Forum DOs and DON'Ts
    Never assume that information you find using a search engine is up-to-date.

  4. #4
    Join Date
    Jan 2008
    Beans
    42

    Re: Domain in redirect loop

    Yes its in there.

  5. #5
    Join Date
    Jan 2008
    Beans
    42

    Re: Domain in redirect loop

    It has to be something simple that I changed out while it was working and it broke it somehow. It's prob something simple too.

  6. #6
    Join Date
    Jan 2008
    Beans
    42

    Re: Domain in redirect loop

    This has been resolved. Apparently it was some code in Coldfusion, which runs part of the site, that was causing this. SO my configuration in Apache was correct this whole time

    Thanks again.

  7. #7
    Join Date
    Nov 2008
    Location
    Storybrooke
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: Domain in redirect loop

    moved to server platforms
    Ubuntu Forums Moderation Staff
    Okay then. We're relying on mirror dust and fairies but now we have a plan which is progress - Emma

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •