I really wish I could overclock this 6150 gpu using nvclock.
errors and roadblocks everywhere
so what is the secret your holding back to make it work?
notice these really bogus numbers under current?
Code:
dv9000@dv9000-HP-Pavilion-dv9000-EZ452UA-ABA:~$ sudo nvclock -sCard: nVidia Geforce Go 6150
Card number: 1
Mode GPU Clock Memory Clock
Coolbits 2D: 100.000 MHz 532.000 MHz
Coolbits 3D: 425.000 MHz 532.000 MHz
Current: -2147483.750 MHz -2147483.750 MHz
Code:
dv9000@dv9000-HP-Pavilion-dv9000-EZ452UA-ABA:~$ sudo nvclock_gtk
(nvclock_gtk:3942): Gdk-CRITICAL **: IA__gdk_draw_drawable: assertion `GDK_IS_DRAWABLE (src)' failed
The program 'nvclock_gtk' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadValue (integer parameter out of range for operation)'.
(Details: serial 53 error_code 2 request_code 156 minor_code 3)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
dv9000@dv9000-HP-Pavilion-dv9000-EZ452UA-ABA:~$ sudo nvclock_gtk
(nvclock_gtk:3993): Gdk-CRITICAL **: IA__gdk_draw_drawable: assertion `GDK_IS_DRAWABLE (src)' failed
dv9000@dv9000-HP-Pavilion-dv9000-EZ452UA-ABA:~$ sudo nvclock_qt
Warning using experimental NV4x lowlevel clock adjustment, if you encounter strange issues, issue a bugreport.
register=0x4000, clockIn=13107000, calculated=-2147483648
PLL=0xc0000033, PLL2=00000000
NVPLL_COEFF: c0000033
NVPLL2_COEFF: 00000000
Warning using experimental NV4x lowlevel clock adjustment, if you encounter strange issues, issue a bugreport.
register=0x4020, clockIn=0, calculated=-2147483648
PLL=0xa000011c, PLL2=00000000
MPLL_COEFF: a000011c
MPLL2_COEFF: 00000000
MPLL_COEFF=00000000
MPLL2_COEFF=00000000
m1=0 m2=0 n1=0 n2=0 p=0
NVPLL_COEFF=c0000033
NVPLL2_COEFF=00000000
m1=0 m2=0 n1=0 n2=0 p=0
dv9000@dv9000-HP-Pavilion-dv9000-EZ452UA-ABA:~$ nvclock -n [new core mhz] -m [new memory mhz] -f
Error: failed to mmap PMC
dv9000@dv9000-HP-Pavilion-dv9000-EZ452UA-ABA:~$ nvclock -n 130 -m 600 -f Error: failed to mmap PMC
dv9000@dv9000-HP-Pavilion-dv9000-EZ452UA-ABA:~$ sudo nvclock -n 130 -m 600 -f
Requested memory clock: 600.000 MHz
Requested core clock: 130.000 MHz
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 156 (NV-CONTROL)
Minor opcode of failed request: 3 ()
Value in failed request: 0x17
Serial number of failed request: 15
Current serial number in output stream: 17
dv9000@dv9000-HP-Pavilion-dv9000-EZ452UA-ABA:~$ sudo nvclock -sCard: nVidia Geforce Go 6150
Card number: 1
Mode GPU Clock Memory Clock
Coolbits 2D: 100.000 MHz 532.000 MHz
Coolbits 3D: 425.000 MHz 532.000 MHz
Current: -2147483.750 MHz -2147483.750 MHz
dv9000@dv9000-HP-Pavilion-dv9000-EZ452UA-ABA:~$ sudo nvclock -n 130 -m 600 -f -b coolbits
Requested memory clock: 600.000 MHz
Requested core clock: 130.000 MHz
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 156 (NV-CONTROL)
Minor opcode of failed request: 3 ()
Value in failed request: 0x17
Serial number of failed request: 15
Current serial number in output stream: 17
^Cdv9000@dv9000-HP-Pavilion-dv9000-EZ452UA-ABA:~$
Bookmarks