Results 1 to 2 of 2

Thread: Help: My xubuntu doesn't see the asus rt-n66u

  1. #1
    Join Date
    Dec 2005
    Beans
    157

    Help: My xubuntu doesn't see the asus rt-n66u

    Hi,
    i've just bought my first router, the asus rt-n66u. I procede connecting the cable fron lan gate of the routher to the one of my pc. The first problem i see is that the led of the gate is orange but maybe is due to not configured connection. Now if digit the ip of router 192.168.1.1 it tells me
    Code:
     	  	
    Connection time out
    192.168.1.1 server is taking too long to respond.
    The site may be unavailable or overload. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web.
    so i disabled the firewall by
    Code:
    sudo gufw disable
    and i've set "no proxy" on Firefox net card configuration. Still i can't reach the router.

    it seems that the pc doesn't see the router, then if a digit

    Code:
    drlillux@drlillux-P55A-UD4:~$ ifconfig
    eth0      Link encap:Ethernet  addressHW 6c:f0:49:54:c9:2c 
              address inet6: fe80::6ef0:49ff:fe54:c92c/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:32333 errors:0 dropped:57 overruns:0 frame:0
              TX packets:7425 errors:0 dropped:0 overruns:0 carrier:0
              collisioni:0 txqueuelen:1000
              Byte RX:8164072 (8.1 MB)  Byte TX:1109505 (1.1 MB)
    
    lo        Link encap:Loopback local 
              address inet:127.0.0.1  Mask:255.0.0.0
              address inet6: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:8094 errors:0 dropped:0 overruns:0 frame:0
              TX packets:8094 errors:0 dropped:0 overruns:0 carrier:0
              collisioni:0 txqueuelen:0
              Byte RX:586191 (586.1 KB)  Byte TX:586191 (586.1 KB)
    
    drlillux@drlillux-P55A-UD4:~$
    then

    Code:
    drlillux@drlillux-P55A-UD4:~$  lspci | grep -i ethernet
    06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
    drlillux@drlillux-P55A-UD4:~$
    Code:
    drlillux@drlillux-P55A-UD4:~$ dmesg | grep eth0
    [    0.902010] r8169 0000:06:00.0: eth0: RTL8168d/8111d at 0xffffc90000672000, 6c:f0:49:54:c9:2c, XID 083000c0 IRQ 54
    [    0.902013] r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [   12.590211] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.711734] r8169 0000:06:00.0: eth0: link down
    [   14.711753] r8169 0000:06:00.0: eth0: link down
    [   14.712039] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.712269] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   16.603661] r8169 0000:06:00.0: eth0: link up
    [   16.603927] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [  568.322625] r8169 0000:06:00.0: eth0: link down
    [  572.619451] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [  612.471760] r8169 0000:06:00.0: eth0: link up
    [  612.472469] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [  622.603382] r8169 0000:06:00.0: eth0: link down
    [  625.399123] r8169 0000:06:00.0: eth0: link up
    [  898.604290] r8169 0000:06:00.0: eth0: link down
    [  905.851823] r8169 0000:06:00.0: eth0: link up
    drlillux@drlillux-P55A-UD4:~$
    moreover my /etc/network/interface contains?

    Code:
    # interfaces(5) file used by ifup(8) and ifdown(8)
    auto lo
    iface lo inet loopback
    i'm working with xubuntu 12.10
    Somebody can help me please

  2. #2
    Join Date
    Dec 2005
    Beans
    157

    Re: Help: My xubuntu doesn't see the asus rt-n66u

    i've tried with my laptop with win xp and it works so i exclude hardware problem to router and cables

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •