Ubuntu 12.10 will not boot all the time

[SUPERFITTER]

I have a duel boot system, Windows 7 and Ubuntu 12.10. Windows 7 I have no problem booting in Grub. Ubuntu 12.10 will not boot all the time and I have to hit the reset button on my tower once or twice to get Ubuntu 12.10 to boot. When it is booted I do not have any problem getting on the Internet or updates.

Ubuntu 12.10 is on a 500 Gb drive and Windows 7 is on another 500Gb drive. Has anyone else had this problem? If so how did you correct this problem?


Thank You

[oldfred]

Is system shutting down normally?

Have you looked in log files to see if anything is reported as not loading, trying repeatedly and then working (sometimes?) or just errors.
I use log file viewer and look at dmesg first, but there are many log files.

logs are in:
/var/log

[SUPERFITTER]

My system shuts down normally.

These are the files that I found:

[    0.531809] hub 4-0:1.0: USB hub found
[    0.531814] hub 4-0:1.0: 4 ports detected
[    0.531877] usbcore: registered new interface driver libusual
[    0.531895] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.531896] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.532008] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.532049] mousedev: PS/2 mouse device common for all mice
[    0.532107] rtc_cmos 00:06: RTC can wake from S4
[    0.532202] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.532225] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.532258] device-mapper: uevent: version 1.0.3
[    0.532290] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.532350] cpuidle: using governor ladder
[    0.532434] cpuidle: using governor menu
[    0.532435] EFI Variables Facility v0.08 2004-May-17
[    0.532557] ashmem: initialized
[    0.532616] TCP: cubic registered
[    0.532663] NET: Registered protocol family 10
[    0.532766] NET: Registered protocol family 17
[    0.532772] Key type dns_resolver registered
[    0.532890] PM: Hibernation image not present or could not be loaded.
[    0.532896] registered taskstats version 1
[    0.534540] Key type trusted registered
[    0.536067] Key type encrypted registered
[    0.537794]   Magic number: 9:5:962
[    0.537851] memory memory13: hash matches
[    0.537927] rtc_cmos 00:06: setting system clock to 2013-04-21 00:59:36 UTC (1366505976)
[    0.538841] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.538842] EDD information not available.
[    0.539804] Freeing unused kernel memory: 932k freed
[    0.539872] Write protecting the kernel read-only data: 12288k
[    0.542242] Freeing unused kernel memory: 1472k freed
[    0.544104] Freeing unused kernel memory: 1136k freed
[    0.552743] udevd[114]: starting version 175
[    0.556122] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.567652] ahci 0000:00:1f.2: version 3.0
[    0.567823] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.583349] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[    0.583355] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.583361] ahci 0000:00:1f.2: setting latency timer to 64
[    0.599693] scsi0 : ahci
[    0.599824] scsi1 : ahci
[    0.599955] scsi2 : ahci
[    0.600042] scsi3 : ahci
[    0.600166] scsi4 : ahci
[    0.600289] scsi5 : ahci
[    0.600431] ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 42
[    0.600433] ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 42
[    0.600434] ata3: DUMMY
[    0.600434] ata4: DUMMY
[    0.600435] ata5: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16300 irq 42
[    0.600436] ata6: DUMMY
[    0.827112] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    0.919034] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.919059] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.919083] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.920456] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    0.920464] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880408477d70), AE_NOT_FOUND (20120320/psparse-536)
[    0.920503] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    0.920507] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880408477de8), AE_NOT_FOUND (20120320/psparse-536)
[    0.920890] ata1.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[    0.920895] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.921326] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    0.921333] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff880408477f50), AE_NOT_FOUND (20120320/psparse-536)
[    0.921352] ata5.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100
[    0.921741] ata2.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[    0.921745] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.922398] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    0.922406] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880408477d70), AE_NOT_FOUND (20120320/psparse-536)
[    0.922676] ata1.00: configured for UDMA/133
[    0.922885] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[    0.922979] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.922995] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.923025] sd 0:0:0:0: [sda] Write Protect is off
[    0.923027] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.923037] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.923147] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    0.923151] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880408477de8), AE_NOT_FOUND (20120320/psparse-536)
[    0.923339] ata2.00: configured for UDMA/133
[    0.925561] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    0.925568] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff880408477f50), AE_NOT_FOUND (20120320/psparse-536)
[    0.925580] ata5.00: configured for UDMA/100
[    0.946207]  sda: sda1 sda2 < sda5 >
[    0.946611] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.946780] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[    0.946833] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.946850] sd 1:0:0:0: [sdb] Write Protect is off
[    0.946851] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.946855] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    0.946859] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.959353] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.959358] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.959587] hub 1-1:1.0: USB hub found
[    0.959686] hub 1-1:1.0: 6 ports detected
[    0.993414]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[    0.993902] sd 1:0:0:0: [sdb] Attached SCSI disk
[    0.996196] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224BB  SB00 PQ: 0 ANSI: 5
[    0.999358] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.999363] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.999517] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    0.999601] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    1.070860] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.203077] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.203081] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.203335] hub 2-1:1.0: USB hub found
[    1.203443] hub 2-1:1.0: 8 ports detected
[    1.357120] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
[    1.357121] EXT4-fs (sdb1): write access will be enabled during recovery
[    1.370559] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.387744] usb 3-3: New USB device found, idVendor=0b05, idProduct=17ab
[    1.387747] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.387750] usb 3-3: Product: 802.11n WLAN Adapter
[    1.387752] usb 3-3: Manufacturer: Realtek
[    1.387754] usb 3-3: SerialNumber: 00e04c000001
[    1.438489] Refined TSC clocksource calibration: 3503.445 MHz.
[    1.438495] Switching to clocksource tsc
[    1.458584] usb 1-1.4: new low-speed USB device number 3 using ehci_hcd
[    1.554607] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c05a
[    1.554612] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.554615] usb 1-1.4: Product: USB Optical Mouse
[    1.554617] usb 1-1.4: Manufacturer: Logitech
[    1.558400] usbcore: registered new interface driver usbhid
[    1.558402] usbhid: USB HID core driver
[    1.559507] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3
[    1.559639] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.4/input0
[    2.841769] EXT4-fs (sdb1): recovery complete
[    2.855954] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   10.272063] Adding 16736252k swap on /dev/sdb6.  Priority:-1 extents:1 across:16736252k 
[   10.389854] udevd[481]: starting version 175
[   10.513042] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x15
[   10.546219] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x15
[   10.546907] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x15
[   10.547508] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x15
[   10.548048] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x15
[   10.548574] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x15
[   10.549153] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x15
[   10.549748] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x15
[   10.550315] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   10.629447] type=1400 audit(1366520386.595:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=639 comm="apparmor_parser"
[   10.629648] type=1400 audit(1366520386.599:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=639 comm="apparmor_parser"
[   10.629760] type=1400 audit(1366520386.599:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=639 comm="apparmor_parser"
[   10.652593] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   10.652598] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.652599] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   10.652601] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   10.652603] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.652605] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \LED_ 1 (20120320/utaddress-251)
[   10.652606] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20120320/utaddress-251)
[   10.652608] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.652608] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.694274] 
[   10.694274] rtw driver version=v3.3.2_3192.20120103
[   10.694292] register rtw_netdev_ops to netdev_ops
[   10.694293] CHIP TYPE: RTL8188C_8192C
[   10.694294] 
[   10.694294] usb_endpoint_descriptor(0):
[   10.694295] bLength=7
[   10.694296] bDescriptorType=5
[   10.694296] bEndpointAddress=81
[   10.694297] wMaxPacketSize=200
[   10.694297] bInterval=0
[   10.694298] RT_usb_endpoint_is_bulk_in = 1
[   10.694298] 
[   10.694298] usb_endpoint_descriptor(1):
[   10.694299] bLength=7
[   10.694300] bDescriptorType=5
[   10.694300] bEndpointAddress=2
[   10.694301] wMaxPacketSize=200
[   10.694301] bInterval=0
[   10.694302] RT_usb_endpoint_is_bulk_out = 2
[   10.694302] 
[   10.694302] usb_endpoint_descriptor(2):
[   10.694303] bLength=7
[   10.694304] bDescriptorType=5
[   10.694304] bEndpointAddress=3
[   10.694305] wMaxPacketSize=200
[   10.694305] bInterval=0
[   10.694306] RT_usb_endpoint_is_bulk_out = 3
[   10.694306] 
[   10.694306] usb_endpoint_descriptor(3):
[   10.694307] bLength=7
[   10.694308] bDescriptorType=5
[   10.694308] bEndpointAddress=84
[   10.694309] wMaxPacketSize=40
[   10.694309] bInterval=1
[   10.694310] RT_usb_endpoint_is_int_in = 4, Interval = 1
[   10.694310] nr_endpoint=4, in_num=2, out_num=2
[   10.694310] 
[   10.694311] USB_SPEED_HIGH
[   10.694379] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_92C.
[   10.694381] RF_Type is 2!!
[   10.694493] EEPROM type is E-FUSE
[   10.694495] ====> ReadAdapterInfo8192C
[   10.694535] Boot from EFUSE, Autoload OK !
[   10.718236] mei 0000:00:16.0: setting latency timer to 64
[   10.718280] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[   10.723991] mei 0000:00:16.0: wd: failed to find the client
[   10.740039] Qualcomm Atheros(R) AR816x/AR817x PCI-E Ethernet Network Driver
[   10.749928] alx 0000:03:00.0: alx(90:2b:34:5a:b3:03): Qualcomm Atheros Ethernet Network Connection
[   10.750559] EEPROMVID = 0x0b05
[   10.750560] EEPROMPID = 0x17ab
[   10.750561] EEPROMCustomerID : 0x00
[   10.750562] EEPROMSubCustomerID: 0x00
[   10.750562] RT_CustomerID: 0x00
[   10.750563] _ReadMACAddress MAC Address from EFUSE = 08:60:6e:cd:f6:1a
[   10.750564] EEPROMRegulatory = 0x0
[   10.750565] _ReadBoardType(0)
[   10.750565] BT Coexistance = disable
[   10.750566] RT_ChannelPlan: 0x00
[   10.750567] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
[   10.750567] ### PS params=>  power_mgnt(0),usbss_enable(0) ###
[   10.750568] ### AntDivCfg(0)
[   10.750568] readAdapterInfo_8192CU(): REPLACEMENT = 1
[   10.750569] <==== ReadAdapterInfo8192C in 56 ms
[   10.750636] rtw_macaddr_cfg MAC Address  = 08:60:6e:cd:f6:1a
[   10.750637] MAC Address from pnetdev->dev_addr= 08:60:6e:cd:f6:1a
[   10.750705] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[   10.750717] usbcore: registered new interface driver rtl8192cu
[   10.758683] lp: driver loaded but no devices found
[   10.884407] kvm: disabled by bios
[   10.885720] kvm: disabled by bios
[   10.889737] kvm: disabled by bios
[   10.913770] kvm: disabled by bios
[   10.917820] kvm: disabled by bios
[   10.921721] kvm: disabled by bios
[   10.925653] kvm: disabled by bios
[   10.929613] kvm: disabled by bios
[   10.963279] [drm] Initialized drm 1.1.0 20060810
[   10.990195] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.088327] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   11.088446] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   11.088502] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   11.088555] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   11.088607] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.088926] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[   11.088927] hda-intel: Force to non-snoop mode
[   11.088968] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[   11.391399] [drm] radeon defaulting to kernel modesetting.
[   11.391401] [drm] radeon kernel modesetting enabled.
[   11.667510] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[   11.667552] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[   11.667603] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   11.667649] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   11.667693] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   11.667717] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   11.667956] [drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1458:0x2556).
[   11.667994] [drm] register mmio base: 0xF7E00000
[   11.667995] [drm] register mmio size: 262144
[   11.668056] ATOM BIOS: GV
[   11.668075] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   11.668077] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   11.672301] [drm] Detected VRAM RAM=1024M, BAR=256M
[   11.672303] [drm] RAM width 128bits DDR
[   11.672345] [TTM] Zone  kernel: Available graphics memory: 8196832 kiB
[   11.672346] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   11.672347] [TTM] Initializing pool allocator
[   11.672351] [TTM] Initializing DMA pool allocator
[   11.672368] [drm] radeon: 1024M of VRAM memory ready
[   11.672369] [drm] radeon: 512M of GTT memory ready.
[   11.672384] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.672385] [drm] Driver supports precise vblank timestamp query.
[   11.672425] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[   11.672433] radeon 0000:01:00.0: radeon: using MSI.
[   11.672466] [drm] radeon: irq initialized.
[   11.672470] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   11.672756] [drm] Loading VERDE Microcode
[   12.057642] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   12.057727] radeon 0000:01:00.0: WB enabled
[   12.057729] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8803f4a34c00
[   12.057730] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8803f4a34c04
[   12.057731] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8803f4a34c08
[   12.076408] [drm] ring test on 0 succeeded in 1 usecs
[   12.076413] [drm] ring test on 1 succeeded in 1 usecs
[   12.076416] [drm] ring test on 2 succeeded in 1 usecs
[   12.076551] [drm] ib test on ring 0 succeeded in 0 usecs
[   12.076586] [drm] ib test on ring 1 succeeded in 0 usecs
[   12.076623] [drm] ib test on ring 2 succeeded in 0 usecs
[   12.087181] [drm] Radeon Display Connectors
[   12.087183] [drm] Connector 0:
[   12.087184] [drm]   DP-1
[   12.087184] [drm]   HPD2
[   12.087185] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[   12.087186] [drm]   Encoders:
[   12.087186] [drm]     DFP1: INTERNAL_UNIPHY2
[   12.087187] [drm] Connector 1:
[   12.087188] [drm]   DP-2
[   12.087188] [drm]   HPD3
[   12.087189] [drm]   DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[   12.087189] [drm]   Encoders:
[   12.087190] [drm]     DFP2: INTERNAL_UNIPHY2
[   12.087191] [drm] Connector 2:
[   12.087191] [drm]   HDMI-A-1
[   12.087192] [drm]   HPD1
[   12.087193] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[   12.087193] [drm]   Encoders:
[   12.087194] [drm]     DFP3: INTERNAL_UNIPHY1
[   12.087194] [drm] Connector 3:
[   12.087195] [drm]   DVI-I-1
[   12.087195] [drm]   HPD4
[   12.087196] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[   12.087197] [drm]   Encoders:
[   12.087197] [drm]     DFP4: INTERNAL_UNIPHY
[   12.087198] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.087410] [drm] Internal thermal controller with fan control
[   12.087438] [drm] radeon: power management initialized
[   12.140768] [drm] fb mappable at 0xE1143000
[   12.140769] [drm] vram apper at 0xE0000000
[   12.140770] [drm] size 7299072
[   12.140770] [drm] fb depth is 24
[   12.140771] [drm]    pitch is 6912
[   12.140855] fbcon: radeondrmfb (fb0) is primary device
[   12.140911] Console: switching to colour frame buffer device 210x65
[   12.140927] fb0: radeondrmfb frame buffer device
[   12.140928] drm: registered panic notifier
[   12.140931] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
[   12.718138] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[   12.759255] init: failsafe main process (929) killed by TERM signal
[   12.850986] type=1400 audit(1366520388.819:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1014 comm="apparmor_parser"
[   12.851190] type=1400 audit(1366520388.819:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1014 comm="apparmor_parser"
[   12.851303] type=1400 audit(1366520388.819:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1014 comm="apparmor_parser"
[   12.851352] type=1400 audit(1366520388.819:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1011 comm="apparmor_parser"
[   12.851364] type=1400 audit(1366520388.819:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1012 comm="apparmor_parser"
[   12.851567] type=1400 audit(1366520388.823:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1011 comm="apparmor_parser"
[   12.851591] type=1400 audit(1366520388.823:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1012 comm="apparmor_parser"
[   13.105432] bDriverStopped=1
[   13.105651] +871x_drv - drv_open, bup=0
[   13.107881]  ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
[   13.107885] FirmwareDownload92C accquire FW from embedded image
[   13.107888] fw_ver=v79, fw_subver=0, sig=0x88c0
[   13.123006] ppdev: user-space parallel port driver
[   13.123214] fw download ok!
[   13.123215] Set RF Chip ID to RF_6052 and RF type to 2.
[   13.174180] Bluetooth: Core ver 2.16
[   13.174191] NET: Registered protocol family 31
[   13.174192] Bluetooth: HCI device and connection manager initialized
[   13.174193] Bluetooth: HCI socket layer initialized
[   13.174194] Bluetooth: L2CAP socket layer initialized
[   13.174196] Bluetooth: SCO socket layer initialized
[   13.190570] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.190572] Bluetooth: BNEP filters: protocol multicast
[   13.446415] Bluetooth: RFCOMM TTY layer initialized
[   13.446417] Bluetooth: RFCOMM socket layer initialized
[   13.446418] Bluetooth: RFCOMM ver 1.11
[   13.508960] IQK:Start!!!
[   13.514937] Path A IQK failed!!
[   13.516945] Path B IQK Success!!
[   13.521884] Path A IQK failed!!
[   13.523956] Path B IQK Success!!
[   13.525540] IQK: final_candidate is 0
[   13.525544] IQK: RegE94=0 RegE9C=0 RegEA4=0 RegEAC=0 RegEB4=102 RegEBC=b RegEC4=f7 RegECC=7
[   13.525544]  Path B IQ Calibration Success !
[   13.631815] pdmpriv->TxPowerTrackControl = 1
[   13.633375] MAC Address from REG_MACID = 08:60:6e:cd:f6:1a
[   13.633376] rtl8192cu_hal_init in 528ms
[   13.633378] MAC Address = 08:60:6e:cd:f6:1a
[   13.634925] -871x_drv - drv_open, bup=1
[   13.635575] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.635715] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.635727] set_mode = IW_MODE_INFRA
[   13.637016] alx 0000:03:00.0: irq 47 for MSI/MSI-X
[   13.637022] alx 0000:03:00.0: irq 48 for MSI/MSI-X
[   13.637027] alx 0000:03:00.0: irq 49 for MSI/MSI-X
[   13.637032] alx 0000:03:00.0: irq 50 for MSI/MSI-X
[   13.637037] alx 0000:03:00.0: irq 51 for MSI/MSI-X
[   13.637041] alx 0000:03:00.0: irq 52 for MSI/MSI-X
[   13.637046] alx 0000:03:00.0: irq 53 for MSI/MSI-X
[   13.637050] alx 0000:03:00.0: irq 54 for MSI/MSI-X
[   13.637055] alx 0000:03:00.0: irq 55 for MSI/MSI-X
[   13.638590] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   13.639137] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   13.722654] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[   13.722658] set_mode = IW_MODE_INFRA
[   13.722690] =>rtw_wx_set_essid
[   13.722691] ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9a\xffffffc0\xffffffdf\x1d\x02\x04\xffffff88\xffffffff\xffffffff, len=32
[   13.722693] Set SSID under fw_state=0x00000008
[   13.722694] <=rtw_wx_set_essid, ret -1
[   13.726663] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[   14.831254] survey done event(14)
[   14.833098] IW_SCAN_THIS_ESSID, ssid=SUPERFITTER1, len=12
[   15.934136] survey done event(e)
[   15.934330] wpa_set_encryption, crypt.alg = WEP
[   15.934331] (1)wep_key_idx=0
[   15.934332] wep, set_tx=1
[   15.934333] ==> rtw_set_key algorithm(1),keyid(0),key_mask(1)
[   15.934359] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
[   15.934360] set_mode = IW_MODE_INFRA
[   15.934369] =>rtw_wx_set_essid
[   15.934370] ssid=SUPERFITTER1, len=12
[   15.934371] Set SSID under fw_state=0x00000008
[   15.934373] [by_bssid:0][assoc_ssid:SUPERFITTER1][to_roaming:0] new candidate: SUPERFITTER1(00:16:b6:b6:53:35) rssi:-46
[   15.934375] rtw_select_and_join_from_scanned_queue: candidate: SUPERFITTER1(00:16:b6:b6:53:35)
[   15.934377] link to Broadcom AP
[   15.934378] <=rtw_wx_set_essid, ret 0
[   15.934381] Set BSSID under fw_state=0x00000088
[   15.939033] link to Broadcom AP
[   15.941300] OnAuthClient
[   15.941305] network.SupportedRates[0]=82
[   15.941306] network.SupportedRates[1]=84
[   15.941307] network.SupportedRates[2]=8B
[   15.941308] network.SupportedRates[3]=96
[   15.941309] network.SupportedRates[4]=24
[   15.941310] network.SupportedRates[5]=30
[   15.941311] network.SupportedRates[6]=48
[   15.941312] network.SupportedRates[7]=6C
[   15.941313] network.SupportedRates[8]=0C
[   15.941314] network.SupportedRates[9]=12
[   15.941315] network.SupportedRates[10]=18
[   15.941316] network.SupportedRates[11]=60
[   15.941317] bssrate_len = 12
[   15.943488] OnAssocRsp
[   15.943493] report_join_res(1)
[   15.943496] rtw_joinbss_update_network
[   15.943502] rtw_joinbss_update_stainfo
[   15.943599] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
[   15.943939] HTOnAssocRsp
[   15.944252] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   15.945482] update raid entry, mask=0x40000fff, arg=0x80
[   15.945958] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
[   15.946236] SetFwRsvdPagePkt
[   15.946244] Set RSVD page location to Fw.
[   15.946633] =>mlmeext_joinbss_event_callback
dennis@dennis:~$

What do I do next?

[oldfred]

Your 15sec boot looks pretty good. My hard drives are 30 to 40 sec and my inexensive SSD is 10 sec.

The only thing a little slow is this. And I am not sure if first or second entry (entry is start or finish as posted), but I think it is your swap taking 8 sec to mount? Perhaps because it is large? Or is it taking 8 sec to mount your / before the swap entry?

[ 2.855954] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.272063] Adding 16736252k swap on /dev/sdb6. Priority:-1 extents:1 across:16736252k

This is my entry. I have / on sdd3 which is the SSD, and swap on hard drive.

[ 5.599921] EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.561106] Adding 3076412k swap on /dev/sdc11. Priority:-1 extents:1 across:3076412k

[SUPERFITTER]

Is there anyway to speed up this slow entry? Are there other options? I'm using a i7 processor and 16 Gbs of DDR3 memory.

[oldfred]

I noticed that it had to run file recovery. Is it having some sort of issue that need fsck on every other reboot?

Perhaps run the full fsck from a live installer DVD or Flash drive? Reboot fsck is just a quick check.

#From liveCD so everything is unmounted,swap off if necessary, change example shown with partition sdb1 to your partition(s)
#e2fsck is used to check the ext2/ext3/ext4 family of file systems. -p trys fixes where response not required
sudo e2fsck -C0 -p -f -v /dev/sdb1
#if errors: -y auto answers yes for fixes needing response see man e2fsck
sudo e2fsck -f -y -v /dev/sdb1

[SUPERFITTER]

I noticed that it had to run file recovery. Is it having some sort of issue that need fsck on every other reboot?

Perhaps run the full fsck from a live installer DVD or Flash drive? Reboot fsck is just a quick check.

#From liveCD so everything is unmounted,swap off if necessary, change example shown with partition sdb1 to your partition(s)
#e2fsck is used to check the ext2/ext3/ext4 family of file systems. -p trys fixes where response not required
sudo e2fsck -C0 -p -f -v /dev/sdb1
#if errors: -y auto answers yes for fixes needing response see man e2fsck
sudo e2fsck -f -y -v /dev/sdb1

I understand running fsck in terminal with the live DVD after that I am confused.

[oldfred]

It is just to see it that clears up the message of it running recovery on boot.

[SUPERFITTER]

I ran fsck from the DVD and nothing changed. Is there anything that I can copy from the disk to fix problem?

[oldfred]

So is it still running recovery on every reboot?

Did e2fsck report any errors?