Results 1 to 2 of 2

Thread: Wiress issues b43

  1. #1
    Join Date
    Apr 2013
    Beans
    1

    Wiress issues b43

    Ok so I have dual booted my system on Linux Mint Mate 14 I have all my wireless drivers working. My second OS on a seperate hard drive I have Pear OS 7 wireless set up exactly the same. Grub is able to see both OS. However when I try to connect to the wireless it trys to connect and then comes back with authenitication failure. I have searched google and tried several different options. I reset the router and tried all ways that I found suggested. The card is a Netgear Broadcome 4321 any ideas?

    ip link show returns:

    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000 link/ether c8:60:00:6b:52:83 brd ff:ff:ff:ff:ff:ff
    3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT qlen 1000 link/ether 2c:b0:5d:1f:08:4c brd ff:ff:ff:ff:ff:ff

    this is what shows on my linux mint os that the wireless is working on the same machine.

    ip link show returns:


    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000 link/ether c8:60:00:6b:52:83 brd ff:ff:ff:ff:ff:ff
    3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether 2c:b0:5d:1f:08:4c brd ff:ff:ff:ff:ff:ff

    this is what was returned from the OS that is not connecting to wireless.

  2. #2
    Join Date
    Oct 2004
    Location
    Denmark - Scandinavia
    Beans
    17,619
    Distro
    Ubuntu 13.04 Raring Ringtail

    Re: Wiress issues b43

    Moved to Other OS/Distro Support.
    elementary OS Luna
    My Screenshot

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •