Hello everyone,
I'm trying to get an Epson XP-100 printer to work but CUPS for some reason won't see the printer or not properly. I did these to see if the printer is detected by my laptop based on this website https://wiki.ubuntu.com/DebuggingPrintingProblems :
Code:
ashley@HPLP:~$ lsmod | grep usb
usbhid 47238 0
hid 99636 2 hid_microsoft,usbhid
usblp 18307 0
Code:
ashley@HPLP:~$ tail -f /var/log/syslog
Apr 16 10:22:18 HPLP rtkit-daemon[1709]: Supervising 9 threads of 3 processes of 2 users.
Apr 16 10:22:18 HPLP pulseaudio[2055]: [pulseaudio] pid.c: Daemon already running.
Apr 16 10:22:19 HPLP kernel: [ 28.957153] wlan0: no IPv6 routers present
Apr 16 10:22:22 HPLP ntpdate[1778]: adjust time server 91.189.94.4 offset -0.293595 sec
Apr 16 10:22:29 HPLP NetworkManager[895]: <info> (wlan0): IP6 addrconf timed out or failed.
Apr 16 10:22:29 HPLP NetworkManager[895]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Apr 16 10:22:29 HPLP NetworkManager[895]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Apr 16 10:22:29 HPLP NetworkManager[895]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Apr 16 10:31:53 HPLP kernel: [ 603.355836] usb 1-1.2: USB disconnect, device number 3
Apr 16 10:31:53 HPLP kernel: [ 603.356339] usblp0: removed
Apr 16 10:32:00 HPLP kernel: [ 610.459490] usb 1-1.2: new full-speed USB device number 4 using ehci_hcd
Apr 16 10:32:01 HPLP mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2"
Apr 16 10:32:01 HPLP mtp-probe: bus: 1, device: 4 was not an MTP device
Apr 16 10:32:01 HPLP kernel: [ 611.011218] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0895
Code:
ashley@HPLP:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 004: ID 04b8:0895 Seiko Epson Corp.
Bus 002 Device 003: ID 045e:076c Microsoft Corp.
Bus 002 Device 004: ID 138a:0005 Validity Sensors, Inc. VFS301 Fingerprint Reader
Bus 002 Device 005: ID 064e:f209 Suyin Corp.
Code:
ashley@HPLP:~$ ls -l /dev/usb/lp* /dev/bus/usb/*/*
crw-rw-r-- 1 root root 189, 0 Apr 16 10:22 /dev/bus/usb/001/001
crw-rw-r-- 1 root root 189, 1 Apr 16 10:22 /dev/bus/usb/001/002
crw-rw-r-- 1 root lp 189, 3 Apr 16 10:32 /dev/bus/usb/001/004
crw-rw-r-- 1 root root 189, 128 Apr 16 10:22 /dev/bus/usb/002/001
crw-rw-r-- 1 root root 189, 129 Apr 16 10:22 /dev/bus/usb/002/002
crw-rw-r-- 1 root root 189, 130 Apr 16 10:22 /dev/bus/usb/002/003
crw-rw-r-- 1 root root 189, 131 Apr 16 10:22 /dev/bus/usb/002/004
crw-rw-r-- 1 root root 189, 132 Apr 16 10:22 /dev/bus/usb/002/005
crw-rw---- 1 root lp 180, 0 Apr 16 10:32 /dev/usb/lp0
Code:
ashley@HPLP:~$ sudo usb_printerid /dev/usb/lp0
GET_DEVICE_ID string:
MFG:EPSON;CMD:ESCPL2,BDC,D4,D4PX;MDL:XP-100 Series;CLS:PRINTER;DES:EPSON XP-100 Series;CID:EpsonStd9;FID:FXN,DPN,WFN,ETN,AFN,DAN;RID:20;
Code:
sudo usb_printerid /dev/usb/lp1
Error: No such file or directory: can't open '/dev/usb/lp1'
Code:
ashley@HPLP:~$ lpinfo -v
network lpd
network ipps
network https
network http
network ipp
network ipp14
network socket
network beh
network smb
direct usb://EPSON/XP-100%20Series?serial=5144534B3030373813&interface=1
I have also installed printer-driver-all metapackage via synaptic and epson-201204w driver from http://www.openprinting.org/printer/...-XP-100_Series.
I would be really grateful if anyone could help me out.
Bookmarks