Quote Originally Posted by varunendra View Post
Utterlybewildered,

Certain parts of these forums have so high number of new threads that it is usual for threads to go out of the first page or even out of a search result after a few hours. If that happens with one of your threads without answers or 'useful' answers, feel free to bump it after 24 hours.

Now regarding the original issue, I may *try* to help if you could post output of -
Code:
lspci -nnk | grep -iA2 net
Enter the above command in a terminal and post back its output here. You may just copy-paste it in the terminal (with your mouse) to avoid typing errors.
Hi, thank you here is the result from the terminal

welshybabe@ubuntu:~$ lspci - nnk / grep -iA2 net
Usage: lspci [<switches>]


Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree


Display options:
-v Be verbose (-vv for very verbose)
-k Show kernel drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers


Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's via DNS
-qq As above, but re-query locally cached entries
-Q Query the PCI ID database for all ID's via DNS


Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only devices with specified ID's


Other options:
-i <file> Use specified ID database instead of A2
-p <file> Look up kernel modules in a given file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)


PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read PCI configuration dump from a given file