hp-check output is

david@Ubuntu-PC:~$ hp-check

HP Linux Imaging and Printing System (ver. 3.12.11)
Dependency/Version Check Utility ver. 15

Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION

Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version

Saving output in log file: /home/david/hp-check.log

Initializing. Please wait...
warning: ubuntu-13.04 version is not supported. Using ubuntu-12.10 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

Kernel: 3.8.0-4-generic #8-Ubuntu SMP Fri Feb 1 18:02:56 UTC 2013 GNU/Linux
Host: Ubuntu-PC
Proc: 3.8.0-4-generic #8-Ubuntu SMP Fri Feb 1 18:02:56 UTC 2013 GNU/Linux
Distribution: ubuntu 13.04

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.12.11
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 13.04 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.12.11

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.12.11
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.11
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory

Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1360054698
pending_upgrade_time = 0
latest_available_version = 3.12.11

[installation]
date_time = 05/02/13 09:34:55
version = 3.12.11

[settings]
systray_visible = 2
systray_messages = 0

[last_used]
device_uri =
printer_name =
working_dir = .

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list =

[fax]
voice_phone =
email_address =


<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>

--------------------------
| External Dependencies |
--------------------------

gs Ghostscript REQUIRED 7.05 9.06 OK -
network Network-wget OPTIONAL - 1.14 OK -
dbus DBus REQUIRED - 1.6.8 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.23 OK -
policykit Admin-Policy-framework OPTIONAL - 0.105 OK -
xsane SANE-GUI OPTIONAL 0.9 0.998 OK -
cups CUPS REQUIRED 1.1 1.6.1 OK 'CUPS Scheduler is running'

-------------------------
| General Dependencies |
-------------------------

reportlab Python-PDF-Lib OPTIONAL 2.0 2.5 OK -
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.9.6 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.17 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.1.1 OK -
python-devel Python-SDK REQUIRED 2.2 2.7.3 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.9.6 OK -
cups-devel CUPS-SDK REQUIRED - 1.6.1 OK -
sane-devel SANE-SDK REQUIRED - 1.0.23 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.23 OK -
cups-image CUPS-Image-Lib REQUIRED - 1.6.1 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.4.3 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -

------------------------------
| Compile Time Dependencies |
------------------------------

gcc gcc-Compiler REQUIRED - 4.7.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 3.81 OK -

----------------------
| Python Extentions |
----------------------

cupsext CUPS-Extension REQUIRED - 3.12.11 OK -
pcardext PhotoCard-Extension REQUIRED - 3.12.11 OK -
hpmudext IO-Extension REQUIRED - 3.12.11 OK -

-----------------------
| Scan Configuration |
-----------------------

hpaio HPLIP-SANE-Backend REQUIRED - 3.12.11 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.12.11 OK -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------


Deskjet_3070_B611
-----------------
Type: Printer
Device URI: hp:/usb/Deskjet_3070_B611_series?serial=CN1AA475ZS05MQ
PPD: /etc/cups/ppd/Deskjet_3070_B611.ppd
PPD Description: HP Deskjet 3070 b611 Series, hpcups 3.12.11
Printer status: printer Deskjet_3070_B611 disabled since Tue 05 Feb 2013 09:27:02 GMT - Unplugged or turned off
error: Unable to communicate with device (code=12): hp:/usb/Deskjet_3070_B611_series?serial=CN1AA475ZS05MQ
error: Device not found
error: Communication status: Failed


--------------
| PERMISSION |
--------------

groups user-groups Required - - OK david adm lp cdrom sudo dip plugdev lpadmin sambashare


-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
None

Missing Optional Dependencies
-----------------------------
None


Total Errors: 1
Total Warnings: 0


Done.

Ubuntu 13.04 64Bit

Says printer is turned off or unplugged when it's clearly on. Installed HP-LIP with no issues entered in my wireless router password ect..... NO ERRORS! Setup completed successfully.