Ubuntu 12.04 spdif output doesn't support multichannel sound
Hi there, I'm a relatively new Ubuntu-user, and I need a bit of help!
I just recently discovered that my laptop (an Acer Aspire 5670), has an optical-spdif output and since it's connected to a 5.1 Yamaha Receiver I bought a special optical cable and connected them properly.
Now, I noticed most people usually find at this point that they cannot configure their sound cards to output an spdif signal, but that is definitely not the problem in my case, since when I made the connection Ubuntu automatically changed the output to spdif (and properly gave me the option to choose between spdif and analog) and I could hear everything just fine (more than fine actually, since the sound was greatly improved!).
However, what did happen was that the spdif signal was set to 2 Channel Stereo and there is no option whatsoever for multichannel sound through the spdif output! (while, there is a 5.1-analogue output option, which I tried while the laptop was connected with the spdif cable and obviously nothing happened) So even though I played video files with multichannel sound (6Channel AC3 and DTS) the audio reached the receiver as 2-Channel PCM. I tried playing the files through different players (Movie Player, VLC, SMplayer) but nothing changed.
So, here's hoping someone could help me figure out whether this is a software/driver problem (and if so, how and if I could possibly fix it) or a hardware problem, for instance that, maybe, my sound card can output spdif but only for 2Ch. Audio (which would be weird but possible I guess) and in which case, I suppose, I can't do much more than accept my defeat!
Thanks in advance to anyone that answers!
Re: Ubuntu 12.04 spdif output doesn't support multichannel sound
Multi-channel over S/PDIF is a AC3 or DTS bit-stream & not just more channels of PCM. S/PDIF is bandwidth limited.
AC3/DTS bitstream pass-thru' (excepting a52 encoder plugin) has to be invoked by the media player & supported by audio device.
Alsa is okay & recent pulse audio should be okay.
To configure pulse audio to handle iec958 pass-thru you need to use "pavucontrol" & pulse audio >=1.0.
The best test players are VLC or mplayer.
- need to configure the right alsa output device
- select use iec958 output
- need to select AC3/DTS audio track when start playing
Or easier to start from cmd line..
vlc --aout alsa --alsa-audio-device=iec958
This might be close guess:
mplayer -ac hwac3,hwdts, -channels 6 -ao alsa:device=iec958
Note: the above do not upmix..stereo is still stereo.
Last edited by BicyclerBoy; February 3rd, 2013 at 01:29 AM.
Tags for this Thread