Results 1 to 2 of 2

Thread: Force DVI Output Even with no monitor connected

  1. #1
    Join Date
    May 2007
    Location
    England
    Beans
    47
    Distro
    Ubuntu 12.04 Precise Pangolin

    Question Force DVI Output Even with no monitor connected

    My media centre sometimes has the TV (connected via DVI) powered off on boot. When this happens, I power on the TV and get no signal. A normal boot with the TV powered on works fine.

    Is there a way to force the graphics card to output through DVI (DFP1) even if no monitor is detected?

    System Info:
    Mythbuntu 12.04
    Radeon HD 3000
    fglrx driver
    Mythtv 0.26


    Xorg.conf
    Code:
    Section "ServerLayout"
            Identifier     "aticonfig Layout"
            Screen      0  "aticonfig-Screen[0]-0" 0 0
    EndSection
    
    Section "Module"
            Load  "glx"
    EndSection
    
    Section "Monitor"
            Identifier   "aticonfig-Monitor[0]-0"
            Option      "VendorName" "ATI Proprietary Driver"
            Option      "ModelName" "Generic Autodetecting Monitor"
            Option      "DPMS" "true"
    EndSection
    
    Section "Device"
            Identifier  "aticonfig-Device[0]-0"
            Driver      "fglrx"
            BusID       "PCI:1:5:0"
    EndSection
    
    Section "Screen"
            Identifier "Default Screen"
            DefaultDepth     24
    EndSection
    
    Section "Screen"
            Identifier "aticonfig-Screen[0]-0"
            Device     "aticonfig-Device[0]-0"
            Monitor    "aticonfig-Monitor[0]-0"
            DefaultDepth     24
            SubSection "Display"
                    Viewport   0 0
                    Depth     24
            EndSubSection
    EndSection
    Xorg.0.log
    Code:
    [    19.687]
    X.Org X Server 1.11.3
    Release Date: 2011-12-16
    [    19.687] X Protocol Version 11, Revision 0
    [    19.687] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu
    [    19.687] Current Operating System: Linux mediacentre 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:42:16 UTC 2012 x86_64
    [    19.687] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-35-generic root=UUID=15e12c46-6e77-40e4-a0cd-082074da7a44 ro quiet splash radeon.audio=1 vt.handoff=7
    [    19.687] Build Date: 29 August 2012  12:12:33AM
    [    19.687] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support)
    [    19.687] Current version of pixman: 0.24.4
    [    19.687]    Before reporting problems, check http://wiki.x.org
            to make sure that you have the latest version.
    [    19.687] Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    19.687] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 25 17:11:50 2013
    [    19.687] (==) Using config file: "/etc/X11/xorg.conf"
    [    19.687] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    19.687] (==) ServerLayout "aticonfig Layout"
    [    19.687] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [    19.687] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
    [    19.687] (**) |   |-->Device "aticonfig-Device[0]-0"
    [    19.687] (==) Automatically adding devices
    [    19.687] (==) Automatically enabling devices
    [    19.687] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [    19.687]    Entry deleted from font path.
    [    19.687] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    [    19.687]    Entry deleted from font path.
    [    19.687] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    [    19.687]    Entry deleted from font path.
    [    19.687] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    [    19.687]    Entry deleted from font path.
    [    19.687] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    [    19.687]    Entry deleted from font path.
    [    19.687] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
    [    19.687]    Entry deleted from font path.
    [    19.687] (==) FontPath set to:
            /usr/share/fonts/X11/misc,
            /usr/share/fonts/X11/Type1,
            built-ins
    [    19.687] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    [    19.687] (II) The server relies on udev to provide the list of input devices.
            If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    19.687] (II) Loader magic: 0x7f77b3100b00
    [    19.687] (II) Module ABI versions:
    [    19.687]    X.Org ANSI C Emulation: 0.4
    [    19.687]    X.Org Video Driver: 11.0
    [    19.687]    X.Org ANSI C Emulation: 0.4
    [    19.687]    X.Org Video Driver: 11.0
    [    19.687]    X.Org XInput driver : 16.0
    [    19.687]    X.Org Server Extension : 6.0
    [    19.688] (--) PCI:*(0:1:5:0) 1002:9616:1043:8388 rev 0, Mem @ 0xd0000000/268435456, 0xfe9f0000/65536, 0xfe800000/1048576, I/O @ 0x0000d000/256
    [    19.688] (II) Open ACPI successful (/var/run/acpid.socket)
    [    19.688] (II) "extmod" will be loaded by default.
    [    19.688] (II) "dbe" will be loaded by default.
    [    19.688] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [    19.688] (II) "record" will be loaded by default.
    [    19.688] (II) "dri" will be loaded by default.
    [    19.688] (II) "dri2" will be loaded by default.
    [    19.688] (II) LoadModule: "glx"
    [    19.722] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so
    [    19.722] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [    19.722]    compiled for 6.9.0, module version = 1.0.0
    [    19.723] (II) Loading extension GLX
    [    19.723] (II) LoadModule: "extmod"
    [    19.723] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [    19.723] (II) Module extmod: vendor="X.Org Foundation"
    [    19.723]    compiled for 1.11.3, module version = 1.0.0
    [    19.723]    Module class: X.Org Server Extension
    [    19.723]    ABI class: X.Org Server Extension, version 6.0
    [    19.723] (II) Loading extension MIT-SCREEN-SAVER
    [    19.723] (II) Loading extension XFree86-VidModeExtension
    [    19.723] (II) Loading extension XFree86-DGA
    [    19.723] (II) Loading extension DPMS
    [    19.723] (II) Loading extension XVideo
    [    19.723] (II) Loading extension XVideo-MotionCompensation
    [    19.723] (II) Loading extension X-Resource
    [    19.723] (II) LoadModule: "dbe"
    [    19.723] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [    19.723] (II) Module dbe: vendor="X.Org Foundation"
    [    19.723]    compiled for 1.11.3, module version = 1.0.0
    [    19.723]    Module class: X.Org Server Extension
    [    19.723]    ABI class: X.Org Server Extension, version 6.0
    [    19.723] (II) Loading extension DOUBLE-BUFFER
    [    19.723] (II) LoadModule: "record"
    [    19.723] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [    19.723] (II) Module record: vendor="X.Org Foundation"
    [    19.723]    compiled for 1.11.3, module version = 1.13.0
    [    19.723]    Module class: X.Org Server Extension
    [    19.723]    ABI class: X.Org Server Extension, version 6.0
    [    19.723] (II) Loading extension RECORD
    [    19.723] (II) LoadModule: "dri"
    [    19.724] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    19.724] (II) Module dri: vendor="X.Org Foundation"
    [    19.724] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    19.724] (II) Module dri: vendor="X.Org Foundation"
    [    19.724]    compiled for 1.11.3, module version = 1.0.0
    [    19.724]    ABI class: X.Org Server Extension, version 6.0
    [    19.724] (II) Loading extension XFree86-DRI
    [    19.724] (II) LoadModule: "dri2"
    [    19.724] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    19.724] (II) Module dri2: vendor="X.Org Foundation"
    [    19.724]    compiled for 1.11.3, module version = 1.2.0
    [    19.724]    ABI class: X.Org Server Extension, version 6.0
    [    19.724] (II) Loading extension DRI2
    [    19.724] (II) LoadModule: "fglrx"
    [    19.724] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
    [    19.739] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [    19.739]    compiled for 1.4.99.906, module version = 8.96.4
    [    19.739]    Module class: X.Org Video Driver
    [    19.739] (II) Loading sub module "fglrxdrm"
    [    19.739] (II) LoadModule: "fglrxdrm"
    [    19.739] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
    [    19.739] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [    19.739]    compiled for 1.4.99.906, module version = 8.96.4
    [    19.739] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4
    [    19.739] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7
    [    19.739] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50
    [    19.739] (++) using VT number 7
    
    [    19.739] (WW) Falling back to old probe method for fglrx
    [    19.744] (II) Loading PCS database from /etc/ati/amdpcsdb
    [    19.744] (--) Chipset Supported AMD Graphics Processor (0x9616) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    [    19.744] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
    [    19.745] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [    19.745] (II) AMD Video driver is signed
    [    19.745] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
    [    19.745] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
    [    19.745] (II) fglrx(0): pEnt->device->identifier=0x7f77b3a1dec0
    [    19.745] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
    [    19.745] (II) fglrx(0): pEnt->device->identifier=0x7f77b3a1dec0
    [    19.745] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
    [    19.745] (II) Loading sub module "vgahw"
    [    19.745] (II) LoadModule: "vgahw"
    [    19.745] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [    19.745] (II) Module vgahw: vendor="X.Org Foundation"
    [    19.745]    compiled for 1.11.3, module version = 0.1.0
    [    19.745]    ABI class: X.Org Video Driver, version 11.0
    [    19.745] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [    19.745] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [    19.745] (==) fglrx(0): Default visual is TrueColor
    [    19.745] (**) fglrx(0): Option "DPMS" "true"
    [    19.745] (==) fglrx(0): RGB weight 888
    [    19.745] (II) fglrx(0): Using 8 bits per RGB
    [    19.745] (==) fglrx(0): Buffer Tiling is ON
    [    19.745] (II) Loading sub module "fglrxdrm"
    [    19.745] (II) LoadModule: "fglrxdrm"
    [    19.745] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
    [    19.745] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [    19.745]    compiled for 1.4.99.906, module version = 8.96.4
    [    19.747] ukiDynamicMajor: found major device number 249
    [    19.747] ukiDynamicMajor: found major device number 249
    [    19.747] ukiOpenByBusid: Searching for BusID PCI:1:5:0
    [    19.747] ukiOpenDevice: node name is /dev/ati/card0
    [    19.747] ukiOpenDevice: open result is 12, (OK)
    [    19.747] ukiOpenByBusid: ukiOpenMinor returns 12
    [    19.747] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
    [    19.747] (**) fglrx(0): NoAccel = NO
    [    19.747] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
    [    19.747] (--) fglrx(0): Chipset: "ATI Radeon 3000 Graphics" (Chipset = 0x9616)
    [    19.747] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x8388)
    [    19.747] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    [    19.747] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    [    19.747] (--) fglrx(0): MMIO registers at 0xfe9f0000
    [    19.747] (--) fglrx(0): I/O port at 0x0000d000
    [    19.747] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [    19.748] (II) fglrx(0): AC Adapter is used
    [    19.754] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [    19.755] (II) Loading sub module "vbe"
    [    19.755] (II) LoadModule: "vbe"
    [    19.755] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [    19.755] (II) Module vbe: vendor="X.Org Foundation"
    [    19.755]    compiled for 1.11.3, module version = 1.1.0
    [    19.755]    ABI class: X.Org Video Driver, version 11.0
    [    19.755] (II) fglrx(0): VESA BIOS detected
    [    19.755] (II) fglrx(0): VESA VBE Version 3.0
    [    19.755] (II) fglrx(0): VESA BIOS detected
    [    19.755] (II) fglrx(0): VESA VBE Version 3.0
    [    19.755] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [    19.755] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    [    19.755] (II) fglrx(0): VESA VBE OEM Software Rev: 10.82
    [    19.755] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
    [    19.755] (II) fglrx(0): VESA VBE OEM Product: RS780
    [    19.755] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [    19.762] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    [    19.762] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
    [    19.762] (II) fglrx(0): PCIE card detected
    [    19.762] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [    19.762] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [    19.767] (II) fglrx(0): Using adapter: 1:5.0.
    [    19.776] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
    [    19.797] (II) fglrx(0): Interrupt handler installed at IRQ 18.
    [    19.798] (II) fglrx(0): RandR 1.2 support is enabled!
    [    19.798] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [    19.798] (==) fglrx(0): Center Mode is disabled
    [    19.798] (II) Loading sub module "fb"
    [    19.798] (II) LoadModule: "fb"
    [    19.798] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    19.798] (II) Module fb: vendor="X.Org Foundation"
    [    19.798]    compiled for 1.11.3, module version = 1.0.0
    [    19.798]    ABI class: X.Org ANSI C Emulation, version 0.4
    [    19.798] (II) Loading sub module "ddc"
    [    19.798] (II) LoadModule: "ddc"
    [    19.798] (II) Module "ddc" already built-in
    [    20.724] (II) fglrx(0): Finished Initialize PPLIB!
    [    20.746] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    [    20.746] (II) fglrx(0): Output CRT1 has no monitor section
    [    20.746] (II) Loading sub module "ddc"
    [    20.746] (II) LoadModule: "ddc"
    [    20.746] (II) Module "ddc" already built-in
    [    20.746] (II) fglrx(0): Connected Display0: DFP1
    [    20.746] (II) fglrx(0): Display0 EDID data ---------------------------
    [    20.746] (II) fglrx(0): Manufacturer: CVT  Model: 1080  Serial#: 20070707
    [    20.746] (II) fglrx(0): Year: 2007  Week: 32
    [    20.746] (II) fglrx(0): EDID Version: 1.3
    [    20.746] (II) fglrx(0): Digital Display Input
    [    20.746] (II) fglrx(0): Max Image Size [cm]: horiz.: 70  vert.: 40
    [    20.746] (II) fglrx(0): Gamma: 2.20
    [    20.746] (II) fglrx(0): No DPMS capabilities specified
    [    20.746] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [    20.746] (II) fglrx(0): First detailed timing is preferred mode
    [    20.746] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
    [    20.746] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
    [    20.746] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
    [    20.746] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
    [    20.746] (II) fglrx(0): Manufacturer's mask: 0
    [    20.746] (II) fglrx(0): Supported detailed timing:
    [    20.746] (II) fglrx(0): clock: 148.5 MHz   Image Size:  735 x 420 mm
    [    20.746] (II) fglrx(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
    [    20.746] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
    [    20.746] (II) fglrx(0): Supported detailed timing:
    [    20.746] (II) fglrx(0): clock: 27.0 MHz   Image Size:  735 x 420 mm
    [    20.746] (II) fglrx(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
    [    20.746] (II) fglrx(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
    [    20.746] (II) fglrx(0): Monitor name: CVTE TV
    [    20.746] (II) fglrx(0): Ranges: V min: 48 V max: 62 Hz, H min: 14 H max: 70 kHz, PixClock max 155 MHz
    [    20.746] (II) fglrx(0): Number of EDID sections to follow: 1
    [    20.746] (II) fglrx(0): EDID (in hex):
    [    20.746] (II) fglrx(0):     00ffffffffffff000ed4801033413201
    [    20.746] (II) fglrx(0):     20110103804628780aee91a3544c9926
    [    20.746] (II) fglrx(0):     0f505400000001010101010101010101
    [    20.746] (II) fglrx(0):     010101010101023a80d072382d40102c
    [    20.746] (II) fglrx(0):     4580dfa42100001e8c0ad08a20e02d10
    [    20.746] (II) fglrx(0):     103e9600dfa421000018000000fc0043
    [    20.746] (II) fglrx(0):     5654452054560a2020202020000000fd
    [    20.746] (II) fglrx(0):     00303e0e460f000a2020202020200196
    [    20.746] (II) fglrx(0): End of Display0 EDID data --------------------
    [    20.840] (II) fglrx(0): EDID for output DFP1
    [    20.840] (II) fglrx(0): Manufacturer: CVT  Model: 1080  Serial#: 20070707
    [    20.840] (II) fglrx(0): Year: 2007  Week: 32
    [    20.840] (II) fglrx(0): EDID Version: 1.3
    [    20.840] (II) fglrx(0): Digital Display Input
    [    20.840] (II) fglrx(0): Max Image Size [cm]: horiz.: 70  vert.: 40
    [    20.840] (II) fglrx(0): Gamma: 2.20
    [    20.840] (II) fglrx(0): No DPMS capabilities specified
    [    20.840] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [    20.840] (II) fglrx(0): First detailed timing is preferred mode
    [    20.840] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
    [    20.840] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
    [    20.840] (II) fglrx(0): Manufacturer's mask: 0
    [    20.840] (II) fglrx(0): Supported detailed timing:
    [    20.840] (II) fglrx(0): clock: 148.5 MHz   Image Size:  735 x 420 mm
    [    20.840] (II) fglrx(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
    [    20.840] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
    [    20.840] (II) fglrx(0): Supported detailed timing:
    [    20.840] (II) fglrx(0): clock: 27.0 MHz   Image Size:  735 x 420 mm
    [    20.840] (II) fglrx(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
    [    20.840] (II) fglrx(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
    [    20.840] (II) fglrx(0): Monitor name: CVTE TV
    [    20.840] (II) fglrx(0): Ranges: V min: 48 V max: 62 Hz, H min: 14 H max: 70 kHz, PixClock max 155 MHz
    [    20.840] (II) fglrx(0): Monitor name: CVTE TV
    [    20.840] (II) fglrx(0): Ranges: V min: 48 V max: 62 Hz, H min: 14 H max: 70 kHz, PixClock max 155 MHz
    [    20.840] (II) fglrx(0): Number of EDID sections to follow: 1
    [    20.840] (II) fglrx(0): EDID (in hex):
    [    20.840] (II) fglrx(0):     00ffffffffffff000ed4801033413201
    [    20.840] (II) fglrx(0):     20110103804628780aee91a3544c9926
    [    20.840] (II) fglrx(0):     0f505400000001010101010101010101
    [    20.840] (II) fglrx(0):     010101010101023a80d072382d40102c
    [    20.840] (II) fglrx(0):     4580dfa42100001e8c0ad08a20e02d10
    [    20.840] (II) fglrx(0):     103e9600dfa421000018000000fc0043
    [    20.840] (II) fglrx(0):     5654452054560a2020202020000000fd
    [    20.840] (II) fglrx(0):     00303e0e460f000a2020202020200196
    [    20.840] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    20.840] (II) fglrx(0): Using EDID range info for horizontal sync
    [    20.840] (II) fglrx(0): Using EDID range info for vertical refresh
    [    20.840] (II) fglrx(0): Printing DDC gathered Modelines:
    [    20.840] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    20.840] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    20.840] (II) fglrx(0): Printing probed modes for output DFP1
    [    20.840] (II) fglrx(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz)
    [    20.840] (II) fglrx(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 -hsync -vsync (56.2 kHz)
    [    20.841] (II) fglrx(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (33.8 kHz)
    [    20.841] (II) fglrx(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 -hsync -vsync (28.1 kHz)
    [    20.841] (II) fglrx(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 -hsync -vsync (27.0 kHz)
    [    20.841] (II) fglrx(0): Modeline "1776x1000"x60.0  147.05  1776 1880 2072 2368  1000 1001 1004 1035 +hsync -vsync (62.1 kHz)
    [    20.841] (II) fglrx(0): Modeline "1776x1000"x50.0  120.18  1776 1872 2056 2336  1000 1001 1004 1029 +hsync -vsync (51.4 kHz)
    [    20.841] (II) fglrx(0): Modeline "1776x1000"x30.0   67.92  1776 1824 2000 2224  1000 1001 1004 1018 +hsync -vsync (30.5 kHz)
    [    20.841] (II) fglrx(0): Modeline "1776x1000"x25.0   55.21  1776 1800 1976 2176  1000 1001 1004 1015 +hsync -vsync (25.4 kHz)
    [    20.841] (II) fglrx(0): Modeline "1776x1000"x24.0   52.56  1776 1792 1968 2160  1000 1001 1004 1014 +hsync -vsync (24.3 kHz)
    [    20.841] (II) fglrx(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 +hsync -vsync (65.3 kHz)
    [    20.841] (II) fglrx(0): Modeline "1680x1050"x50.0  120.20  1680 1776 1952 2224  1050 1051 1054 1081 +hsync -vsync (54.0 kHz)
    [    20.841] (II) fglrx(0): Modeline "1680x1050"x24.0   52.34  1680 1704 1864 2048  1050 1051 1054 1065 +hsync -vsync (25.6 kHz)
    [    20.841] (II) fglrx(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
    [    20.841] (II) fglrx(0): Modeline "1400x1050"x50.0   99.88  1400 1480 1624 1848  1050 1051 1054 1081 +hsync -vsync (54.0 kHz)
    [    20.841] (II) fglrx(0): Modeline "1400x1050"x24.0   43.96  1400 1424 1560 1720  1050 1051 1054 1065 +hsync -vsync (25.6 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x1024"x50.0   89.37  1280 1352 1488 1696  1024 1025 1028 1054 +hsync -vsync (52.7 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x1024"x24.0   39.10  1280 1296 1424 1568  1024 1025 1028 1039 +hsync -vsync (24.9 kHz)
    [    20.841] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 +hsync -vsync (55.9 kHz)
    [    20.841] (II) fglrx(0): Modeline "1440x900"x50.0   87.41  1440 1512 1664 1888  900 901 904 926 +hsync -vsync (46.3 kHz)
    [    20.841] (II) fglrx(0): Modeline "1440x900"x24.0   37.86  1440 1448 1584 1728  900 901 904 913 +hsync -vsync (21.9 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 -hsync -vsync (60.0 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x960"x50.0   82.99  1280 1344 1480 1680  960 961 964 988 +hsync -vsync (49.4 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x960"x24.0   36.28  1280 1288 1416 1552  960 961 964 974 +hsync -vsync (23.4 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x800"x60.0   83.46  1280 1344 1480 1680  800 801 804 828 +hsync -vsync (49.7 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x800"x50.0   68.55  1280 1336 1472 1664  800 801 804 824 +hsync -vsync (41.2 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x800"x24.0   29.30  1280 1272 1392 1504  800 801 804 812 +hsync -vsync (19.5 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x800"x50.0   68.55  1280 1336 1472 1664  800 801 804 824 +hsync -vsync (41.2 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x800"x24.0   29.30  1280 1272 1392 1504  800 801 804 812 +hsync -vsync (19.5 kHz)
    [    20.841] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync -vsync (53.7 kHz)
    [    20.841] (II) fglrx(0): Modeline "1152x864"x50.0   66.85  1152 1208 1328 1504  864 865 868 889 +hsync -vsync (44.4 kHz)
    [    20.841] (II) fglrx(0): Modeline "1152x864"x24.0   28.62  1152 1144 1256 1360  864 865 868 877 +hsync -vsync (21.0 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync -vsync (47.8 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x768"x50.0   65.17  1280 1336 1464 1648  768 769 772 791 +hsync -vsync (39.5 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x768"x24.0   27.82  1280 1264 1384 1488  768 769 772 779 +hsync -vsync (18.7 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 -hsync -vsync (45.0 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 -hsync -vsync (37.5 kHz)
    [    20.841] (II) fglrx(0): Modeline "1280x720"x24.0   25.82  1280 1256 1376 1472  720 721 724 731 +hsync -vsync (17.5 kHz)
    [    20.841] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
    [    20.841] (II) fglrx(0): Modeline "1024x768"x50.0   51.89  1024 1064 1168 1312  768 769 772 791 +hsync -vsync (39.6 kHz)
    [    20.841] (II) fglrx(0): Modeline "1024x768"x24.0   22.13  1024 1008 1104 1184  768 769 772 779 +hsync -vsync (18.7 kHz)
    [    20.841] (II) fglrx(0): Modeline "1152x648"x60.0   59.90  1152 1200 1320 1488  648 649 652 671 +hsync -vsync (40.3 kHz)
    [    20.841] (II) fglrx(0): Modeline "1152x648"x50.0   48.55  1152 1184 1304 1456  648 649 652 667 +hsync -vsync (33.3 kHz)
    [    20.841] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 -hsync -vsync (37.9 kHz)
    [    20.841] (II) fglrx(0): Modeline "800x600"x50.0   31.14  800 824 904 1008  600 601 604 618 +hsync -vsync (30.9 kHz)
    [    20.841] (II) fglrx(0): Modeline "800x600"x24.0   12.86  800 768 840 880  600 601 604 609 +hsync -vsync (14.6 kHz)
    [    20.841] (II) fglrx(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 +hsync +vsync (31.2 kHz)
    [    20.841] (II) fglrx(0): Modeline "720x480"x60.0   27.00  720 736 798 858  480 489 495 525 +hsync +vsync (31.5 kHz)
    [    20.841] (II) fglrx(0): Modeline "720x480"x50.0   21.78  720 728 800 880  480 481 484 495 +hsync -vsync (24.8 kHz)
    [    20.841] (II) fglrx(0): Modeline "720x480"x24.0    8.78  720 672 736 752  480 481 484 487 +hsync -vsync (11.7 kHz)
    [    20.841] (II) fglrx(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 +hsync +vsync (31.5 kHz)
    [    20.841] (II) fglrx(0): Modeline "640x480"x50.0   19.40  640 648 712 784  480 481 484 495 +hsync -vsync (24.7 kHz)
    [    20.841] (II) fglrx(0): Modeline "640x480"x24.0    7.85  640 600 656 672  480 481 484 487 +hsync -vsync (11.7 kHz)
    [    20.841] (II) fglrx(0): EDID for output CRT1
    [    20.841] (II) fglrx(0): Output DFP1 connected
    [    20.841] (II) fglrx(0): Output CRT1 disconnected
    [    20.841] (II) fglrx(0): Using exact sizes for initial modes
    [    20.841] (II) fglrx(0): Output DFP1 using initial mode 1920x1080
    [    20.841] (II) fglrx(0): Display dimensions: (700, 400) mm
    [    20.841] (II) fglrx(0): DPI set to (69, 69)
    [    20.841] (II) fglrx(0): Adapter ATI Radeon 3000 Graphics has 2 configurable heads and 1 displays connected.
    [    20.841] (==) fglrx(0):  PseudoColor visuals disabled
    [    20.841] (II) Loading sub module "ramdac"
    [    20.841] (II) LoadModule: "ramdac"
    [    20.841] (II) Module "ramdac" already built-in
    [    20.841] (==) fglrx(0): NoDRI = NO
    [    20.841] (==) fglrx(0): Capabilities: 0x00000000
    [    20.841] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [    20.841] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [    20.841] (==) fglrx(0): UseFastTLS=0
    [    20.841] (==) fglrx(0): BlockSignalsOnLock=1
    [    20.841] (II) fglrx(0): Desktop Vsync is enabled.
    [    20.841] (--) Depth 24 pixmap format is 32 bpp
    [    20.842] (II) Loading extension ATIFGLRXDRI
    [    20.841] (--) Depth 24 pixmap format is 32 bpp
    [    20.842] (II) Loading extension ATIFGLRXDRI
    [    20.842] (II) fglrx(0): doing swlDriScreenInit
    [    20.842] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [    20.842] ukiDynamicMajor: found major device number 249
    [    20.842] ukiDynamicMajor: found major device number 249
    [    20.842] ukiDynamicMajor: found major device number 249
    [    20.842] ukiOpenByBusid: Searching for BusID PCI:1:5:0
    [    20.842] ukiOpenDevice: node name is /dev/ati/card0
    [    20.842] ukiOpenDevice: open result is 17, (OK)
    [    20.842] ukiOpenByBusid: ukiOpenMinor returns 17
    [    20.842] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
    [    20.842] (II) fglrx(0): [uki] DRM interface version 1.0
    [    20.842] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:5:0"
    [    20.842] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    [    20.842] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f77ad950000
    [    20.842] (II) fglrx(0): [uki] framebuffer handle = 0x3000
    [    20.842] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [    20.842] (II) fglrx(0): swlDriScreenInit done
    [    20.842] (II) fglrx(0): Kernel Module Version Information:
    [    20.842] (II) fglrx(0):     Name: fglrx
    [    20.842] (II) fglrx(0):     Version: 8.96.4
    [    20.842] (II) fglrx(0):     Date: Mar 12 2012
    [    20.842] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
    [    20.842] (II) fglrx(0): Kernel Module version matches driver.
    [    20.842] (II) fglrx(0): Kernel Module Build Time Information:
    [    20.842] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-35-generic
    [    20.842] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
    [    20.842] (II) fglrx(0):     Build-Kernel __SMP__:            yes
    [    20.842] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
    [    20.842] (II) fglrx(0): [uki] register handle = 0x00004000
    [    20.857] (II) fglrx(0): DRI initialization successfull
    [    20.857] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x0100e000
    [    20.857] (==) fglrx(0): Backing store disabled
    [    20.857] (II) Loading extension FGLRXEXTENSION
    [    20.857] (**) fglrx(0): DPMS enabled
    [    20.858] (II) fglrx(0): Initialized in-driver Xinerama extension
    [    20.858] (**) fglrx(0): Textured Video is enabled.
    [    20.858] (II) LoadModule: "glesx"
    [    20.858] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/glesx.so
    [    20.858] (II) Module glesx: vendor="X.Org Foundation"
    [    20.858]    compiled for 1.4.99.906, module version = 1.0.0
    [    20.858] (II) Loading extension GLESX
    [    20.858] (II) fglrx(0): GLESX enableFlags = 528
    [    20.858] (II) fglrx(0): GLESX is enabled
    [    20.858] (II) LoadModule: "amdxmm"
    [    20.859] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so
    [    20.858] (II) LoadModule: "amdxmm"
    [    20.859] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so
    [    20.859] (II) Module amdxmm: vendor="X.Org Foundation"
    [    20.859]    compiled for 1.4.99.906, module version = 2.0.0
    [    20.859] (II) Loading extension AMDXVOPL
    [    20.859] (II) Loading extension AMDXVBA
    [    20.860] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
    [    20.862] (II) fglrx(0): Enable composite support successfully
    [    20.862] (WW) fglrx(0): Option "VendorName" is not used
    [    20.862] (WW) fglrx(0): Option "ModelName" is not used
    [    20.862] (II) fglrx(0): X context handle = 0x1
    [    20.862] (II) fglrx(0): [DRI] installation complete
    [    20.863] (==) fglrx(0): Silken mouse enabled
    [    20.863] (==) fglrx(0): Using HW cursor of display infrastructure!
    [    20.863] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
    [    20.956] (--) RandR disabled
    [    20.956] (II) Initializing built-in extension Generic Event Extension
    [    20.956] (II) Initializing built-in extension SHAPE
    [    20.956] (II) Initializing built-in extension MIT-SHM
    [    20.956] (II) Initializing built-in extension XInputExtension
    [    20.956] (II) Initializing built-in extension XTEST
    [    20.956] (II) Initializing built-in extension BIG-REQUESTS
    [    20.956] (II) Initializing built-in extension SYNC
    [    20.956] (II) Initializing built-in extension XKEYBOARD
    [    20.956] (II) Initializing built-in extension XC-MISC
    [    20.956] (II) Initializing built-in extension SECURITY
    [    20.956] (II) Initializing built-in extension XINERAMA
    [    20.956] (II) Initializing built-in extension XFIXES
    [    20.956] (II) Initializing built-in extension RENDER
    [    20.956] (II) Initializing built-in extension RANDR
    [    20.956] (II) Initializing built-in extension COMPOSITE
    [    20.956] (II) Initializing built-in extension DAMAGE
    [    21.085] ukiDynamicMajor: found major device number 249
    [    21.086] ukiDynamicMajor: found major device number 249
    [    21.086] ukiOpenByBusid: Searching for BusID PCI:1:5:0
    [    21.086] ukiOpenDevice: node name is /dev/ati/card0
    [    21.087] ukiOpenDevice: open result is 19, (OK)
    [    21.087] ukiOpenByBusid: ukiOpenMinor returns 19
    [    21.087] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
    [    21.162] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [    21.162] (II) fglrx(0): Enable the clock gating!
    [    21.206] (II) fglrx(0): Desktop Vsync is enabled.
    [    21.206] (II) fglrx(0): Setting screen physical size to 508 x 285
    [    21.212] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
    [    21.214] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [    21.215] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    21.215] (II) LoadModule: "evdev"
    [    21.215] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    21.215] (II) LoadModule: "evdev"
    [    21.227] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    21.227] (II) Module evdev: vendor="X.Org Foundation"
    [    21.228]    compiled for 1.11.3, module version = 2.7.0
    [    21.228]    Module class: X.Org XInput Driver
    [    21.228]    ABI class: X.Org XInput driver, version 16.0
    [    21.228] (II) Using input driver 'evdev' for 'Power Button'
    [    21.228] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    21.228] (**) Power Button: always reports core events
    [    21.228] (**) evdev: Power Button: Device: "/dev/input/event1"
    [    21.228] (--) evdev: Power Button: Vendor 0 Product 0x1
    [    21.228] (--) evdev: Power Button: Found keys
    [    21.228] (II) evdev: Power Button: Configuring as keyboard
    [    21.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [    21.228] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [    21.228] (**) Option "xkb_rules" "evdev"
    [    21.228] (**) Option "xkb_model" "pc105"
    [    21.228] (**) Option "xkb_layout" "gb"
    [    21.229] (II) XKB: reuse xkmfile /var/lib/xkb/server-2B4266AA55228AE7D9557A18F1965DBA19850816.xkm
    [    21.230] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [    21.230] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    21.230] (II) Using input driver 'evdev' for 'Power Button'
    [    21.230] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    21.230] (**) Power Button: always reports core events
    [    21.230] (**) evdev: Power Button: Device: "/dev/input/event0"
    [    21.230] (--) evdev: Power Button: Vendor 0 Product 0x1
    [    21.230] (--) evdev: Power Button: Found keys
    [    21.230] (II) evdev: Power Button: Configuring as keyboard
    [    21.230] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [    21.230] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [    21.230] (**) Option "xkb_rules" "evdev"
    [    21.230] (**) Option "xkb_model" "pc105"
    [    21.230] (**) Option "xkb_layout" "gb"
    [    21.230] (II) config/udev: Adding input device saa716x IR (TurboSight TBS 6280) (/dev/input/event4)
    [    21.230] (**) saa716x IR (TurboSight TBS 6280): Applying InputClass "evdev keyboard catchall"
    [    21.230] (II) Using input driver 'evdev' for 'saa716x IR (TurboSight TBS 6280)'
    [    21.230] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    21.230] (**) saa716x IR (TurboSight TBS 6280): always reports core events
    [    21.230] (**) evdev: saa716x IR (TurboSight TBS 6280): Device: "/dev/input/event4"
    [    21.230] (--) evdev: saa716x IR (TurboSight TBS 6280): Vendor 0x6280 Product 0x11
    [    21.230] (--) evdev: saa716x IR (TurboSight TBS 6280): Found keys
    [    21.230] (II) evdev: saa716x IR (TurboSight TBS 6280): Configuring as keyboard
    [    21.230] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/rc/rc0/input4/event4"
    [    21.230] (II) XINPUT: Adding extended input device "saa716x IR (TurboSight TBS 6280)" (type: KEYBOARD, id 8)
    [    21.230] (**) Option "xkb_rules" "evdev"
    [    21.230] (**) Option "xkb_model" "pc105"
    [    21.230] (**) Option "xkb_rules" "evdev"
    [    21.230] (**) Option "xkb_model" "pc105"
    [    21.230] (**) Option "xkb_layout" "gb"
    [    21.231] (II) config/udev: Adding input device Microsft Microsoft Wireless Desktop Receiver 3.1 (/dev/input/event2)
    [    21.231] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: Applying InputClass "evdev keyboard catchall"
    [    21.231] (II) Using input driver 'evdev' for 'Microsft Microsoft Wireless Desktop Receiver 3.1'
    [    21.231] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    21.231] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: always reports core events
    [    21.231] (**) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Device: "/dev/input/event2"
    [    21.231] (--) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Vendor 0x45e Product 0xf9
    [    21.231] (--) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Found keys
    [    21.231] (II) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Configuring as keyboard
    [    21.231] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2/event2"
    [    21.231] (II) XINPUT: Adding extended input device "Microsft Microsoft Wireless Desktop Receiver 3.1" (type: KEYBOARD, id 9)
    [    21.231] (**) Option "xkb_rules" "evdev"
    [    21.231] (**) Option "xkb_model" "pc105"
    [    21.231] (**) Option "xkb_layout" "gb"
    [    21.231] (II) config/udev: Adding input device Microsft Microsoft Wireless Desktop Receiver 3.1 (/dev/input/event3)
    [    21.231] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: Applying InputClass "evdev pointer catchall"
    [    21.231] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: Applying InputClass "evdev keyboard catchall"
    [    21.231] (II) Using input driver 'evdev' for 'Microsft Microsoft Wireless Desktop Receiver 3.1'
    [    21.231] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    21.231] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: always reports core events
    [    21.231] (**) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Device: "/dev/input/event3"
    [    21.231] (--) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Vendor 0x45e Product 0xf9
    [    21.232] (--) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Found 9 mouse buttons
    [    21.232] (--) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Found scroll wheel(s)
    [    21.232] (--) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Found relative axes
    [    21.232] (--) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Found x and y relative axes
    [    21.232] (--) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Found absolute axes
    [    21.232] (II) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Forcing absolute x/y axes to exist.
    [    21.232] (--) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Found keys
    [    21.232] (II) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Configuring as mouse
    [    21.232] (II) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Configuring as keyboard
    [    21.232] (II) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: Adding scrollwheel support
    [    21.232] (**) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: YAxisMapping: buttons 4 and 5
    [    21.232] (**) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    21.232] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3/event3"
    [    21.232] (II) XINPUT: Adding extended input device "Microsft Microsoft Wireless Desktop Receiver 3.1" (type: KEYBOARD, id 10)
    [    21.232] (**) Option "xkb_rules" "evdev"
    [    21.232] (**) Option "xkb_model" "pc105"
    [    21.232] (**) Option "xkb_layout" "gb"
    [    21.232] (II) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: initialized for relative axes.
    [    21.232] (WW) evdev: Microsft Microsoft Wireless Desktop Receiver 3.1: ignoring absolute axes.
    [    21.232] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: (accel) keeping acceleration scheme 1
    [    21.232] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: (accel) acceleration profile 0
    [    21.232] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: (accel) acceleration factor: 2.000
    [    21.232] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: (accel) acceleration profile 0
    [    21.232] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: (accel) acceleration factor: 2.000
    [    21.232] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: (accel) acceleration threshold: 4
    [    21.232] (II) config/udev: Adding input device Microsft Microsoft Wireless Desktop Receiver 3.1 (/dev/input/mouse0)
    [    21.232] (II) No input driver specified, ignoring this device.
    [    21.232] (II) This device may have been added with another device file.
    [    21.232] (II) config/udev: Adding input device pac207 (/dev/input/event6)
    [    21.232] (**) pac207: Applying InputClass "evdev keyboard catchall"
    [    21.232] (II) Using input driver 'evdev' for 'pac207'
    [    21.232] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    21.233] (**) pac207: always reports core events
    [    21.233] (**) evdev: pac207: Device: "/dev/input/event6"
    [    21.233] (--) evdev: pac207: Vendor 0x93a Product 0x2468
    [    21.233] (--) evdev: pac207: Found keys
    [    21.233] (II) evdev: pac207: Configuring as keyboard
    [    21.233] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/input/input6/event6"
    [    21.233] (II) XINPUT: Adding extended input device "pac207" (type: KEYBOARD, id 11)
    [    21.233] (**) Option "xkb_rules" "evdev"
    [    21.233] (**) Option "xkb_model" "pc105"
    [    21.233] (**) Option "xkb_layout" "gb"
    [    21.233] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event10)
    [    21.233] (II) No input driver specified, ignoring this device.
    [    21.233] (II) This device may have been added with another device file.
    [    21.233] (II) config/udev: Adding input device HDA ATI SB Line-Out (/dev/input/event11)
    [    21.233] (II) No input driver specified, ignoring this device.
    [    21.233] (II) This device may have been added with another device file.
    [    21.233] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
    [    21.233] (II) No input driver specified, ignoring this device.
    [    21.233] (II) This device may have been added with another device file.
    [    21.234] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event8)
    [    21.234] (II) No input driver specified, ignoring this device.
    [    21.234] (II) This device may have been added with another device file.
    [    21.234] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event9)
    [    21.234] (II) No input driver specified, ignoring this device.
    [    21.234] (II) This device may have been added with another device file.
    [    21.235] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (saa716x) (/dev/input/event5)
    [    21.235] (**) MCE IR Keyboard/Mouse (saa716x): Applying InputClass "evdev pointer catchall"
    [    21.235] (**) MCE IR Keyboard/Mouse (saa716x): Applying InputClass "evdev keyboard catchall"
    [    21.235] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (saa716x)'
    [    21.235] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    21.235] (**) MCE IR Keyboard/Mouse (saa716x): always reports core events
    [    21.235] (**) evdev: MCE IR Keyboard/Mouse (saa716x): Device: "/dev/input/event5"
    [    21.235] (--) evdev: MCE IR Keyboard/Mouse (saa716x): Vendor 0 Product 0
    [    21.235] (--) evdev: MCE IR Keyboard/Mouse (saa716x): Found 3 mouse buttons
    [    21.235] (--) evdev: MCE IR Keyboard/Mouse (saa716x): Found relative axes
    [    21.235] (--) evdev: MCE IR Keyboard/Mouse (saa716x): Found x and y relative axes
    [    21.235] (--) evdev: MCE IR Keyboard/Mouse (saa716x): Found keys
    [    21.235] (--) evdev: MCE IR Keyboard/Mouse (saa716x): Found x and y relative axes
    [    21.235] (--) evdev: MCE IR Keyboard/Mouse (saa716x): Found keys
    [    21.235] (II) evdev: MCE IR Keyboard/Mouse (saa716x): Configuring as mouse
    [    21.235] (II) evdev: MCE IR Keyboard/Mouse (saa716x): Configuring as keyboard
    [    21.235] (**) evdev: MCE IR Keyboard/Mouse (saa716x): YAxisMapping: buttons 4 and 5
    [    21.235] (**) evdev: MCE IR Keyboard/Mouse (saa716x): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    21.235] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
    [    21.235] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (saa716x)" (type: KEYBOARD, id 12)
    [    21.235] (**) Option "xkb_rules" "evdev"
    [    21.235] (**) Option "xkb_model" "pc105"
    [    21.235] (**) Option "xkb_layout" "gb"
    [    21.235] (II) evdev: MCE IR Keyboard/Mouse (saa716x): initialized for relative axes.
    [    21.235] (**) MCE IR Keyboard/Mouse (saa716x): (accel) keeping acceleration scheme 1
    [    21.235] (**) MCE IR Keyboard/Mouse (saa716x): (accel) acceleration profile 0
    [    21.235] (**) MCE IR Keyboard/Mouse (saa716x): (accel) acceleration factor: 2.000
    [    21.235] (**) MCE IR Keyboard/Mouse (saa716x): (accel) acceleration threshold: 4
    [    21.236] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (saa716x) (/dev/input/mouse1)
    [    21.236] (II) No input driver specified, ignoring this device.
    [    21.236] (II) This device may have been added with another device file.
    [    21.263] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [    22.058] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    22.058] (II) fglrx(0): Using hsync ranges from config file
    [    22.058] (II) fglrx(0): Using vrefresh ranges from config file
    [    22.058] (II) fglrx(0): Printing DDC gathered Modelines:
    [    22.058] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    22.058] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    22.181] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    22.181] (II) fglrx(0): Using hsync ranges from config file
    [    22.181] (II) fglrx(0): Using vrefresh ranges from config file
    [    22.181] (II) fglrx(0): Printing DDC gathered Modelines:
    [    22.181] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    22.181] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    22.278] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    22.279] (II) fglrx(0): Using hsync ranges from config file
    [    22.279] (II) fglrx(0): Using vrefresh ranges from config file
    [    22.279] (II) fglrx(0): Printing DDC gathered Modelines:
    [    22.279] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    22.279] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    22.711] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    22.711] (II) fglrx(0): Using hsync ranges from config file
    [    22.711] (II) fglrx(0): Using vrefresh ranges from config file
    [    22.711] (II) fglrx(0): Printing DDC gathered Modelines:
    [    22.711] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    22.711] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    22.810] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    22.810] (II) fglrx(0): Using hsync ranges from config file
    [    22.810] (II) fglrx(0): Using vrefresh ranges from config file
    [    22.810] (II) fglrx(0): Using hsync ranges from config file
    [    22.810] (II) fglrx(0): Using vrefresh ranges from config file
    [    22.810] (II) fglrx(0): Printing DDC gathered Modelines:
    [    22.810] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    22.810] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    23.128] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    23.128] (II) fglrx(0): Using hsync ranges from config file
    [    23.128] (II) fglrx(0): Using vrefresh ranges from config file
    [    23.128] (II) fglrx(0): Printing DDC gathered Modelines:
    [    23.128] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    23.128] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    23.618] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    23.618] (II) fglrx(0): Using hsync ranges from config file
    [    23.618] (II) fglrx(0): Using vrefresh ranges from config file
    [    23.618] (II) fglrx(0): Printing DDC gathered Modelines:
    [    23.618] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    23.618] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    23.724] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    23.724] (II) fglrx(0): Using hsync ranges from config file
    [    23.724] (II) fglrx(0): Using vrefresh ranges from config file
    [    23.724] (II) fglrx(0): Printing DDC gathered Modelines:
    [    23.724] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    23.724] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    65.717] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    65.717] (II) fglrx(0): Using hsync ranges from config file
    [    65.717] (II) fglrx(0): Using vrefresh ranges from config file
    [    65.717] (II) fglrx(0): Printing DDC gathered Modelines:
    [    65.717] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    65.717] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    65.814] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    65.814] (II) fglrx(0): Using hsync ranges from config file
    [    65.814] (II) fglrx(0): Using vrefresh ranges from config file
    [    65.814] (II) fglrx(0): Printing DDC gathered Modelines:
    [    65.814] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    65.814] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    71.657] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    71.657] (II) fglrx(0): Using hsync ranges from config file
    [    71.657] (II) fglrx(0): Using vrefresh ranges from config file
    [    71.657] (II) fglrx(0): Printing DDC gathered Modelines:
    [    71.657] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    71.657] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    71.754] (II) fglrx(0): EDID vendor "CVT", prod id 4224
    [    71.754] (II) fglrx(0): Using hsync ranges from config file
    [    71.754] (II) fglrx(0): Using vrefresh ranges from config file
    [    71.754] (II) fglrx(0): Printing DDC gathered Modelines:
    [    71.754] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    71.754] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
    [    71.754] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [    71.754] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)

  2. #2
    Join Date
    Feb 2007
    Location
    West Hills CA
    Beans
    8,050
    Distro
    Ubuntu 12.10 Quantal Quetzal

    Re: Force DVI Output Even with no monitor connected

    I presume that you checked the BIOS for a switch to use PCI video for primary?

    I know the open source radeon driver has some switches to force video:

    https://wiki.archlinux.org/index.php...ual_Head_Setup

    Perhaps there are similar switches in the proprietary driver?
    Last edited by tgalati4; January 25th, 2013 at 08:50 PM.
    -------------------------------------
    Oooh Shiny: PopularPages

    Unumquodque potest reparantur. Patientia sit virtus.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •