I am having a problem with my nook color not automounting in the VMware workstation 9.0.
I have Vmware tools installed and have checked the VMware options on my host Windows 7, through VM >> settings, and it shows USB controller is present. I have also checked in the removable devices options on the host for VMware, and it shows it is also enabled.
When I go to plug in my nook color however, I get a "Unable to mount nook color, error initializing camera :-60 could not lock the device" dialog box.
I also had a dialog box pop up from my Windows OS host saying it was going to give my tablet over to the "guest" OS which is ubuntu.
Looking around on google, I ran a few commands in the terminal to see if this could help someone wanting to help me with more knowledge about using virtualization and mounting a device to read and write to. Let me include some logs.
Thanks. I am stumped at this point. What did I do wrong? I am using Ubuntu 12.10 as my "guest" operating system.
meteorrock@meteorrock-virtual-machine:~$ sudo fdisk -l
[sudo] password for meteorrock:
Disk /dev/sda: 214.7 GB, 214748364800 bytes
255 heads, 63 sectors/track, 26108 cylinders, total 419430400 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00079085
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 417333247 208665600 83 Linux
/dev/sda2 417335294 419428351 1046529 5 Extended
/dev/sda5 417335296 419428351 1046528 82 Linux swap / Solaris
Bus 001 Device 005: ID 18d1:2d02 Google Inc.
Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub