Results 1 to 3 of 3

Thread: ubuntu 12.10 hangs boot time cups

  1. #1
    Join Date
    Jun 2010
    Beans
    13

    Thumbs down ubuntu 12.10 hangs boot time cups

    I have a desktop running Mint 13 without problem. The same desktop before was using Ubuntu 12.04.

    After looking at Ubuntu 12.10 I did a install on a separate partition.

    The system hangs (boot time) when the cups daemon is started (do not complete).

    Strangely enough the same system works very well in live mode (I was able to print a test page on my printer).

    I did a test on Mint14 (based on Ubuntu 12.10), installed on a different partition, and I did get the same result (hanging at boot time).

    Anybody ?

    Output from command inxi -Fxz (from Mint 13)

    System: Host: 7444-Linux Kernel: 3.2.0-23-generic i686 (32 bit, gcc: 4.6.3)
    Desktop: Gnome (Gtk 3.4.2) Distro: Linux Mint 13 Maya
    Machine: Mobo: Abit model: IP35 PRO(P35+ICH9R) version: 1.x (:10) Bios: Phoenix version: 6.00 PG date: 09/06/2007
    CPU: Dual core Intel Core2 Duo CPU E6750 (-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 ssse3 vmx) bmips: 10880.1
    Clock Speeds: 1: 2040.00 MHz 2: 2040.00 MHz
    Graphics: Card: NVIDIA GT218 [GeForce 210] bus-ID: 02:00.0
    X.Org: 1.11.3 drivers: nvidia (unloaded: fbdev,vesa,nouveau) Resolution: 1920x1080@51.0hz
    GLX Renderer: GeForce 210/PCIe/SSE2 GLX Version: 3.3.0 NVIDIA 295.40 Direct Rendering: Yes
    Audio: Card-1: Creative Labs CA0106 Soundblaster driver: snd_ca0106 port: af00 bus-ID: 04:04.0 Sound: ALSA ver: 1.0.24
    Card-2: NVIDIA High Definition Audio Controller driver: snd_hda_intel bus-ID: 02:00.1
    Card-3: Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
    Network: Card-1: Atheros AR922X Wireless Network Adapter driver: ath9k bus-ID: 04:05.0
    IF: wlan0 state: up mac: <filter>
    Card-2: Realtek RTL-8110SC/8169SC Gigabit Ethernet driver: r8169 ver: 2.3LK-NAPI port: aa00 bus-ID: 04:00.0
    IF: eth0 state: down mac: <filter>
    Card-3: Realtek RTL-8110SC/8169SC Gigabit Ethernet driver: r8169 ver: 2.3LK-NAPI port: ac00 bus-ID: 04:01.0
    IF: eth1 state: down mac: <filter>
    Drives: HDD Total Size: 2550.5GB (15.7% used) 1: /dev/sda ST3400820AS 400.1GB
    2: /dev/sdb ST32000542AS 2000.4GB 3: /dev/sdc WDC_WD1500ADFD 150.0GB
    Partition: ID: / size: 19G used: 12G (65%) fs: ext3 ID: swap-1 size: 6.00GB used: 0.00GB (0%) fs: swap
    Sensors: System Temperatures: cpu: 20.0C mobo: N/A gpu: 0.0:49C
    Fan Speeds (in rpm): cpu: N/A
    Info: Processes: 160 Uptime: 2:23 Memory: 1046.7/2771.3MB Runlevel: 2 Gcc sys: 4.6.3 Client: Shell inxi: 1.7.33

    File cups.conf (printer Epson C88)

    # Printer configuration file for CUPS v1.6.1
    # Written by cupsd
    # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
    <DefaultPrinter Stylus-C88>
    UUID urn:uuid:cd141d08-a2bc-392f-73c9-c23a57a12c1c
    Info EPSON Stylus C88
    Location am-OEM
    MakeModel Epson Stylus C88 - CUPS+Gutenprint v5.2.9
    DeviceURI usb://EPSON/Stylus%20C88?serial=LMA011202131157260
    State Idle
    StateTime 1357497375
    Type 8425484
    Accepting Yes
    Shared Yes
    JobSheets none none
    QuotaPeriod 0
    PageLimit 0
    KLimit 0
    OpPolicy default
    ErrorPolicy retry-job
    </Printer>

    Log from access_log (cups) /var/log/cups/

    localhost - - [06/Jan/2013:13:36:09 -0500] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok
    localhost - root [06/Jan/2013:13:36:09 -0500] "POST / HTTP/1.1" 200 1197 CUPS-Get-Devices -
    localhost - - [06/Jan/2013:13:36:11 -0500] "POST / HTTP/1.1" 200 4924637 CUPS-Get-PPDs -
    localhost - - [06/Jan/2013:13:36:14 -0500] "POST /admin/ HTTP/1.1" 401 328 CUPS-Add-Modify-Printer successful-ok
    localhost - root [06/Jan/2013:13:36:14 -0500] "POST /admin/ HTTP/1.1" 200 328 CUPS-Add-Modify-Printer successful-ok
    localhost - root [06/Jan/2013:13:36:15 -0500] "POST /admin/ HTTP/1.1" 200 126 Resume-Printer successful-ok
    localhost - root [06/Jan/2013:13:36:15 -0500] "POST /admin/ HTTP/1.1" 200 126 CUPS-Accept-Jobs successful-ok
    localhost - root [06/Jan/2013:13:36:15 -0500] "POST /admin/ HTTP/1.1" 200 126 CUPS-Set-Default successful-ok

    Log from error_log (cups) /var/log/cups/

    E [06/Jan/2013:13:35:46 -0500] Unable to bind socket for address [v1.::1]:631 - Cannot assign requested address.
    E [06/Jan/2013:13:36:11 -0500] [cups-driverd] Bad driver information file "/usr/share/cups/drv/cupsfilters.drv"!
    W [06/Jan/2013:13:36:15 -0500] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_Stylus_C88
    W [06/Jan/2013:13:36:15 -0500] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_Stylus_C88
    W [06/Jan/2013:13:37:51 -0500] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_Stylus_C88
    W [06/Jan/2013:13:37:51 -0500] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_Stylus_C88
    E [06/Jan/2013:13:37:51 -0500] Unable to bind socket for address [v1.::1]:631 - Cannot assign requested address.
    W [06/Jan/2013:13:39:57 -0500] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_Stylus_C88
    W [06/Jan/2013:13:39:57 -0500] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_Stylus_C88
    E [06/Jan/2013:13:39:57 -0500] Unable to bind socket for address [v1.::1]:631 - Cannot assign requested address.
    E [06/Jan/2013:16:54:22 -0500] Unable to bind socket for address [v1.::1]:631 - Cannot assign requested address.

  2. #2
    Join Date
    Nov 2008
    Location
    Maine
    Beans
    1,125
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: ubuntu 12.10 hangs boot time cups

    can you boot into recovery mode from start up options?
    I would try to recover broken packages, or goto a root shell, and have a look at dmesg, and the /var/syslog also try disabling cups from being run at boot, if it doesnt get fixed after trying to repair broken pakages.
    use chkconfig to disable services
    Code:
    # chkconfig cups off
    if you dont see the recovery mode on startup, try hitting esc or tab, and opting into run level 3.
    post back if you are able to get into a root shell.
    ~Conradin~

  3. #3
    Join Date
    Jun 2010
    Beans
    13

    Smile Re: ubuntu 12.10 hangs boot time cups

    Solved.

    I did not install a boot manager with Ubuntu 12.10 and used Mint 13 boot manager (dual boot between Mint 13 and 12.10).

    grub-mkconfig running under Mint 13 discovered Ubuntu 12.10 but definition for 12.10 (grub.cfg Mint13) was wrong. (generic kernel) and made booting impossible

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •