To get the SDCard slot working on Arch:
Code:
wget https://bugs.launchpad.net/bugs/971876/+attachment/2991730/+files/rts_bpp.tar.bz2
tar jxf rts_bpp.tar.bz2
cd rts_bpp
make
make install
depmod
modprobe rts_bpp
dmesg
dmesg should show similar to the following:
Code:
[11345.682579] Initializing Realtek PCIE storage driver...
[11345.682608] --- 14:32:38 ---
[11345.682791] Resource length: 0x10000
[11345.682935] Original address: 0xf7200000, remapped address: 0xffffc900064a0000
[11345.682941] pci->irq = 18
[11345.682943] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[11345.713810] scsi8 : SCSI emulation for Realtek BarossaPlusPlus card reader
[11345.714217] rts_bpp: waiting for device to settle before scanning
[11346.712463] scsi 8:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[11346.713091] Bad LUN (0:1)
[11346.713244] Bad target number (1:0)
[11346.713371] Bad target number (2:0)
[11346.713532] Bad target number (3:0)
[11346.713620] sd 8:0:0:0: [sdk] Attached SCSI removable disk
[11346.713647] Bad target number (4:0)
[11346.713748] Bad target number (5:0)
[11346.713887] Bad target number (6:0)
[11346.713979] Bad target number (7:0)
[11346.714016] rts_bpp: device scan complete
[11353.115872] sd 8:0:0:0: [sdk] 31275008 512-byte logical blocks: (16.0 GB/14.9 GiB)
[11353.116099] sd 8:0:0:0: [sdk] Cache data unavailable
[11353.116105] sd 8:0:0:0: [sdk] Assuming drive cache: write through
[11353.116548] sd 8:0:0:0: [sdk] Cache data unavailable
[11353.116553] sd 8:0:0:0: [sdk] Assuming drive cache: write through
[11353.117549] sdk: sdk1
Note that I couldn't get it to compile at first. I tried this:
yaourt -S rts5229
And after that, the above instructions worked.
Now you can remove it.
yaourt -R rts5229
Bookmarks