Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Absolute noob with no internet ready to throw my computer out the window

  1. #11
    Join Date
    Nov 2012
    Beans
    12

    Re: Absolute noob with no internet ready to throw my computer out the window

    When I click on the network icon, it says "device not ready" under wireless networks.

    My USB wifi adapter has a light but it is not on. There are no switches on it.

  2. #12
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    19,875
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Absolute noob with no internet ready to throw my computer out the window

    Buckie Ball and I have been discussing this in the back room and we're puzzled that both ethernet and wireless say:
    *-network DISABLED
    description: Ethernet interface
    product: N10/ICH 7 Family LAN Controller
    vendor: Intel Corporation
    physical id: 8
    bus info: pci@0000:05:08.0
    logical name: eth0
    version: 01
    serial: 00:12:3f:6e:fd:24
    size: 10Mbit/s
    capacity: 100Mbit/s
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
    configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s
    resources: irq:20 memory:f9eff000-f9efffff ioport:ccc0(size=64)
    *-network DISABLED
    description: Wireless interface
    physical id: 1
    bus info: usb@1:2
    logical name: wlan0
    serial: 00:22:b0:73:fb:ab
    capabilities: ethernet physical wireless
    configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g
    Aside from that, everything looks very good. We are both wondering if there is either a setting in the BIOS that enables/disables these devices or an ACPI problem with the PCI slots.

    Please check in the BIOS for any such settings. In many cases, resetting the BIOS to defaults resolves a lot of problems.

    Let's look for ACPI issues:
    Code:
    dmesg | grep -i -e warn -e error
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  3. #13
    Join Date
    Nov 2012
    Beans
    12

    Re: Absolute noob with no internet ready to throw my computer out the window

    Quote Originally Posted by chili555 View Post
    Buckie Ball and I have been discussing this in the back room and we're puzzled that both ethernet and wireless say:Aside from that, everything looks very good. We are both wondering if there is either a setting in the BIOS that enables/disables these devices or an ACPI problem with the PCI slots.

    Please check in the BIOS for any such settings. In many cases, resetting the BIOS to defaults resolves a lot of problems.

    Let's look for ACPI issues:
    Code:
    dmesg | grep -i -e warn -e error
    Code:
    [    1.340046] system 00:07: [io  0xa200-0xa2fe] has been reserved
    
    [    1.340051] system 00:07: [io  0xa300-0xa3fe] has been reserved
    
    [    1.340055] system 00:07: [io  0xa400-0xa4fe] has been reserved
    
    [    1.340060] system 00:07: [io  0xa500-0xa5fe] has been reserved
    
    [    1.340064] system 00:07: [io  0xa600-0xa6fe] has been reserved
    
    [    1.340069] system 00:07: [io  0xa700-0xa7fe] has been reserved
    
    [    1.340073] system 00:07: [io  0xa800-0xa8fe] has been reserved
    
    [    1.340078] system 00:07: [io  0xa900-0xa9fe] has been reserved
    
    [    1.340083] system 00:07: [io  0xaa00-0xaafe] has been reserved
    
    [    1.340087] system 00:07: [io  0xab00-0xabfe] has been reserved
    
    [    1.340092] system 00:07: [io  0xac00-0xacfe] has been reserved
    
    [    1.340097] system 00:07: [io  0xad00-0xadfe] has been reserved
    
    [    1.340101] system 00:07: [io  0xae00-0xaefe] has been reserved
    
    [    1.340106] system 00:07: [io  0xaf00-0xaffe] has been reserved
    
    [    1.340111] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
    
    [    1.340115] system 00:07: [mem 0xfeda0000-0xfedacfff] has been reserved
    
    [    1.340120] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    
    [    1.340129] pnp: PnP ACPI: found 8 devices
    
    [    1.340132] ACPI: ACPI bus type pnp unregistered
    
    [    1.340137] PnPBIOS: Disabled by ACPI PNP
    
    [    1.377667] PCI: max bus depth: 1 pci_try_num: 2
    
    [    1.377719] pci 0000:00:1c.5: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
    
    [    1.377725] pci 0000:00:1c.5: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
    
    [    1.377731] pci 0000:00:1c.5: BAR 13: assigned [io  0x1000-0x1fff]
    
    [    1.377735] pci 0000:00:1c.4: BAR 14: assigned [mem 0xe0400000-0xe05fffff]
    
    [    1.377740] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe0600000-0xe07fffff 64bit pref]
    
    [    1.377746] pci 0000:00:1c.4: BAR 13: assigned [io  0x3000-0x3fff]
    
    [    1.377751] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0800000-0xe09fffff 64bit pref]
    
    [    1.377757] pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
    
    [    1.377762] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    
    [    1.377766] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    
    [    1.377771] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfeafffff]
    
    [    1.377776] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
    
    [    1.377783] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    
    [    1.377787] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
    
    [    1.377794] pci 0000:00:1c.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
    
    [    1.377799] pci 0000:00:1c.0:   bridge window [mem 0xe0800000-0xe09fffff 64bit pref]
    
    [    1.377807] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    
    [    1.377811] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
    
    [    1.377817] pci 0000:00:1c.4:   bridge window [mem 0xe0400000-0xe05fffff]
    
    [    1.377823] pci 0000:00:1c.4:   bridge window [mem 0xe0600000-0xe07fffff 64bit pref]
    
    [    1.377830] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
    
    [    1.377835] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
    
    [    1.377841] pci 0000:00:1c.5:   bridge window [mem 0xe0000000-0xe01fffff]
    
    [    1.377847] pci 0000:00:1c.5:   bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
    
    [    1.377855] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
    
    [    1.377859] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
    
    [    1.377865] pci 0000:00:1e.0:   bridge window [mem 0xf9e00000-0xf9efffff]
    
    [    1.377891] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    
    [    1.377897] pci 0000:00:01.0: setting latency timer to 64
    
    [    1.377906] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    
    [    1.377911] pci 0000:00:1c.0: setting latency timer to 64
    
    [    1.377919] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    
    [    1.377925] pci 0000:00:1c.4: setting latency timer to 64
    
    [    1.377938] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    
    [    1.377944] pci 0000:00:1c.5: setting latency timer to 64
    
    [    1.377952] pci 0000:00:1e.0: setting latency timer to 64
    
    [    1.377957] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
    
    [    1.377961] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
    
    [    1.377964] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
    
    [    1.377968] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
    
    [    1.377971] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
    
    [    1.377974] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
    
    [    1.377977] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
    
    [    1.377981] pci_bus 0000:02: resource 2 [mem 0xe0800000-0xe09fffff 64bit pref]
    
    [    1.377984] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
    
    [    1.377987] pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe05fffff]
    
    [    1.377990] pci_bus 0000:03: resource 2 [mem 0xe0600000-0xe07fffff 64bit pref]
    
    [    1.377994] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
    
    [    1.377997] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe01fffff]
    
    [    1.378000] pci_bus 0000:04: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
    
    [    1.378004] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
    
    [    1.378007] pci_bus 0000:05: resource 1 [mem 0xf9e00000-0xf9efffff]
    
    [    1.378010] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
    
    [    1.378013] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
    
    [    1.378062] NET: Registered protocol family 2
    
    [    1.378158] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    
    [    1.378499] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    
    [    1.379041] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    
    [    1.379312] TCP: Hash tables configured (established 131072 bind 65536)
    
    [    1.379315] TCP reno registered
    
    [    1.379319] UDP hash table entries: 512 (order: 2, 16384 bytes)
    
    [    1.379329] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    
    [    1.379418] NET: Registered protocol family 1
    
    [    1.379470] pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    
    [    1.379491] pci 0000:00:1d.0: PCI INT A disabled
    
    [    1.379507] pci 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    
    [    1.379527] pci 0000:00:1d.1: PCI INT B disabled
    
    [    1.379542] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    
    [    1.379561] pci 0000:00:1d.2: PCI INT C disabled
    
    [    1.379576] pci 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    
    [    1.379595] pci 0000:00:1d.3: PCI INT D disabled
    
    [    1.379605] pci 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    
    [    1.379639] pci 0000:00:1d.7: PCI INT A disabled
    
    [    1.379676] pci 0000:01:00.0: Boot video device
    
    [    1.379694] pci 0000:05:08.0: Firmware left e100 interrupts enabled; disabling
    
    [    1.379702] PCI: CLS 64 bytes, default 64
    
    [    1.379709] Simple Boot Flag at 0x7a set to 0x1
    
    [    1.380193] audit: initializing netlink socket (disabled)
    
    [    1.380205] type=2000 audit(1354042566.376:1): initialized
    
    [    1.411716] highmem bounce pool size: 64 pages
    
    [    1.411727] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    
    [    1.425381] VFS: Disk quotas dquot_6.5.2
    
    [    1.425472] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    
    [    1.426317] fuse init (API version 7.17)
    
    [    1.426468] msgmni has been set to 1688
    
    [    1.426957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    
    [    1.426999] io scheduler noop registered
    
    [    1.427002] io scheduler deadline registered
    
    [    1.427012] io scheduler cfq registered (default)
    
    [    1.427169] pcieport 0000:00:01.0: setting latency timer to 64
    
    [    1.427215] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    
    [    1.427285] pcieport 0000:00:1c.0: setting latency timer to 64
    
    [    1.427332] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    
    [    1.427411] pcieport 0000:00:1c.4: setting latency timer to 64
    
    [    1.427458] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
    
    [    1.427536] pcieport 0000:00:1c.5: setting latency timer to 64
    
    [    1.427583] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
    
    [    1.427700] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    
    [    1.427740] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    
    [    1.427964] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    
    [    1.427973] ACPI: Power Button [VBTN]
    
    [    1.428069] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    
    [    1.428075] ACPI: Power Button [PWRF]
    
    [    1.491269] ERST: Table is not found!
    
    [    1.491272] GHES: HEST is not enabled!
    
    [    1.491324] isapnp: Scanning for PnP cards...
    
    [    1.491380] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    
    [    1.844467] isapnp: No Plug & Play device found
    
    [    1.924287] Linux agpgart interface v0.103
    
    [    1.926614] brd: module loaded
    
    [    1.927680] loop: module loaded
    
    [    1.927862] ahci 0000:00:1f.2: version 3.0
    
    [    1.927886] ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
    
    [    1.927942] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    
    [    1.928050] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    
    [    1.928056] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
    
    [    1.928062] ahci 0000:00:1f.2: setting latency timer to 64
    
    [    1.928946] scsi0 : ahci
    
    [    1.929076] scsi1 : ahci
    
    [    1.929188] scsi2 : ahci
    
    [    1.929298] scsi3 : ahci
    
    [    1.929377] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 44
    
    [    1.929381] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 44
    
    [    1.929385] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 44
    
    [    1.929389] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 44
    
    [    1.929460] ata_piix 0000:00:1f.1: version 2.13
    
    [    1.929473] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    
    [    1.929526] ata_piix 0000:00:1f.1: setting latency timer to 64
    
    [    1.929998] scsi4 : ata_piix
    
    [    1.930120] scsi5 : ata_piix
    
    [    1.930190] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    
    [    1.930194] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    
    [    1.930798] Fixed MDIO Bus: probed
    
    [    1.930835] tun: Universal TUN/TAP device driver, 1.6
    
    [    1.930838] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    
    [    1.930933] PPP generic driver version 2.4.2
    
    [    1.931100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    
    [    1.931130] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    
    [    1.931143] ata6: port disabled--ignoring
    
    [    1.931150] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    
    [    1.931156] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    
    [    1.931217] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    
    [    1.931241] ehci_hcd 0000:00:1d.7: using broken periodic workaround
    
    [    1.931253] ehci_hcd 0000:00:1d.7: debug port 1
    
    [    1.935125] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    
    [    1.935143] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
    
    [    1.948019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    
    [    1.948207] hub 1-0:1.0: USB hub found
    
    [    1.948214] hub 1-0:1.0: 8 ports detected
    
    [    1.948339] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    
    [    1.948361] uhci_hcd: USB Universal Host Controller Interface driver
    
    [    1.948388] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    
    [    1.948399] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    
    [    1.948403] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    
    [    1.948468] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    
    [    1.948494] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
    
    [    1.948673] hub 2-0:1.0: USB hub found
    
    [    1.948679] hub 2-0:1.0: 2 ports detected
    
    [    1.948774] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    
    [    1.948784] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    
    [    1.948789] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    
    [    1.948845] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    
    [    1.948881] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
    
    [    1.949060] hub 3-0:1.0: USB hub found
    
    [    1.949071] hub 3-0:1.0: 2 ports detected
    
    [    1.949171] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    
    [    1.949181] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    
    [    1.949185] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    
    [    1.949242] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    
    [    1.949278] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
    
    [    1.949461] hub 4-0:1.0: USB hub found
    
    [    1.949467] hub 4-0:1.0: 2 ports detected
    
    [    1.949560] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    
    [    1.949571] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    
    [    1.949575] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    
    [    1.949629] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    
    [    1.949665] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
    
    [    1.949841] hub 5-0:1.0: USB hub found
    
    [    1.949847] hub 5-0:1.0: 2 ports detected
    
    [    1.950009] usbcore: registered new interface driver libusual
    
    [    1.950069] i8042: PNP: No PS/2 controller found. Probing ports directly.
    
    [    1.952902] serio: i8042 KBD port at 0x60,0x64 irq 1
    
    [    1.952912] serio: i8042 AUX port at 0x60,0x64 irq 12
    
    [    1.953127] mousedev: PS/2 mouse device common for all mice
    
    [    1.953365] rtc_cmos 00:05: RTC can wake from S4
    
    [    1.953506] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    
    [    1.953535] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
    
    [    1.953623] device-mapper: uevent: version 1.0.3
    
    [    1.953743] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    
    [    1.953796] EISA: Probing bus 0 at eisa.0
    
    [    1.953801] EISA: Cannot allocate resource for mainboard
    
    [    1.953804] Cannot allocate resource for EISA slot 1
    
    [    1.953808] Cannot allocate resource for EISA slot 2
    
    [    1.953811] Cannot allocate resource for EISA slot 3
    
    [    1.953814] Cannot allocate resource for EISA slot 4
    
    [    1.953817] Cannot allocate resource for EISA slot 5
    
    [    1.953820] Cannot allocate resource for EISA slot 6
    
    [    1.953832] EISA: Detected 0 cards.
    
    [    1.953844] cpufreq-nforce2: No nForce2 chipset.
    
    [    1.953849] cpuidle: using governor ladder
    
    [    1.953852] cpuidle: using governor menu
    
    [    1.953854] EFI Variables Facility v0.08 2004-May-17
    
    [    1.954241] TCP cubic registered
    
    [    1.954423] NET: Registered protocol family 10
    
    [    1.955294] NET: Registered protocol family 17
    
    [    1.955301] Registering the dns_resolver key type
    
    [    1.955329] Using IPI No-Shortcut mode
    
    [    1.955508] PM: Hibernation image not present or could not be loaded.
    
    [    1.955531] registered taskstats version 1
    
    [    1.970119]   Magic number: 4:860:949
    
    [    1.970164] tty tty6: hash matches
    
    [    1.970218] rtc_cmos 00:05: setting system clock to 2012-11-27 18:56:07 UTC (1354042567)
    
    [    1.970244] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    
    [    1.970248] EDD information not available.
    
    [    2.108309] ata5.00: ATAPI: LITE-ON DVDRW SHW-160P6S, PS08, max UDMA/66
    
    [    2.108316] ata5.00: limited to UDMA/33 due to 40-wire cable
    
    [    2.140206] ata5.00: configured for UDMA/33
    
    [    2.248028] ata2: SATA link down (SStatus 0 SControl 300)
    
    [    2.248056] ata4: SATA link down (SStatus 0 SControl 300)
    
    [    2.248084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    
    [    2.248102] ata3: SATA link down (SStatus 0 SControl 300)
    
    [    2.248954] ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
    
    [    2.248959] ata1.00: 1250263728 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
    
    [    2.249904] ata1.00: configured for UDMA/133
    
    [    2.250049] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
    
    [    2.250297] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
    
    [    2.250379] sd 0:0:0:0: [sda] Write Protect is off
    
    [    2.250383] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    
    [    2.250418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    
    [    2.250514] sd 0:0:0:0: Attached scsi generic sg0 type 0
    
    [    2.251714] scsi 4:0:0:0: CD-ROM            LITE-ON  DVDRW SHW-160P6S PS08 PQ: 0 ANSI: 5
    
    [    2.254094] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    
    [    2.254098] cdrom: Uniform CD-ROM driver Revision: 3.20
    
    [    2.254259] sr 4:0:0:0: Attached scsi CD-ROM sr0
    
    [    2.254408] sr 4:0:0:0: Attached scsi generic sg1 type 5
    
    [    2.260025] usb 1-2: new high-speed USB device number 2 using ehci_hcd
    
    [    2.274184]  sda: sda1 sda2 < sda5 >
    
    [    2.274627] sd 0:0:0:0: [sda] Attached SCSI disk
    
    [    2.274731] Freeing unused kernel memory: 740k freed
    
    [    2.275174] Write protecting the kernel text: 5816k
    
    [    2.275202] Write protecting the kernel read-only data: 2376k
    
    [    2.275205] NX-protecting the kernel data: 4424k
    
    [    2.299209] udevd[96]: starting version 175
    
    [    2.376064] Refined TSC clocksource calibration: 3191.999 MHz.
    
    [    2.376073] Switching to clocksource tsc
    
    [    2.385823] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    
    [    2.385827] e100: Copyright(c) 1999-2006 Intel Corporation
    
    [    2.385879] e100 0000:05:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    
    [    2.413903] e100 0000:05:08.0: PME# disabled
    
    [    2.414679] e100 0000:05:08.0: eth0: addr 0xf9eff000, irq 20, MAC addr 00:12:3f:6e:fd:24
    
    [    2.632032] usb 1-8: new high-speed USB device number 5 using ehci_hcd
    
    [    2.666990] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    
    [    2.767593] Initializing USB Mass Storage driver...
    
    [    2.767730] scsi6 : usb-storage 1-8:1.0
    
    [    2.767842] usbcore: registered new interface driver usb-storage
    
    [    2.767845] USB Mass Storage support registered.
    
    [    3.004021] usb 4-1: new low-speed USB device number 2 using uhci_hcd
    
    [    3.436025] usb 4-2: new low-speed USB device number 3 using uhci_hcd
    
    [    3.764609] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer           8.01 PQ: 0 ANSI: 0 CCS
    
    [    3.765526] sd 6:0:0:0: Attached scsi generic sg2 type 0
    
    [    3.766117] sd 6:0:0:0: [sdb] 15682559 512-byte logical blocks: (8.02 GB/7.47 GiB)
    
    [    3.766584] sd 6:0:0:0: [sdb] Write Protect is off
    
    [    3.766589] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
    
    [    3.767081] sd 6:0:0:0: [sdb] No Caching mode page present
    
    [    3.767085] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    
    [    3.769330] sd 6:0:0:0: [sdb] No Caching mode page present
    
    [    3.769334] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    
    [    3.770787]  sdb: sdb1
    
    [    3.772955] sd 6:0:0:0: [sdb] No Caching mode page present
    
    [    3.772958] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    
    [    3.772962] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    
    [    8.995528] ADDRCONF(NETDEV_UP): eth0: link is not ready
    
    [    9.039674] udevd[317]: starting version 175
    
    [    9.086510] lp: driver loaded but no devices found
    
    [    9.088693] Adding 3142652k swap on /dev/sda5.  Priority:-1 extents:1 across:3142652k 
    
    [    9.117431] wmi: Mapper loaded
    
    [    9.130987] [drm] Initialized drm 1.1.0 20060810
    
    [    9.198694] intel_rng: Firmware space is locked read-only. If you can't or
    
    [    9.198697] intel_rng: don't want to disable this in firmware setup, and if
    
    [    9.198699] intel_rng: you are certain that your system has a functional
    
    [    9.198700] intel_rng: RNG, try using the 'no_fwh_detect' option.
    
    [    9.201577] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    
    [    9.201588] nouveau 0000:01:00.0: setting latency timer to 64
    
    [    9.209426] leds_ss4200: no LED devices found
    
    [    9.226191] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    
    [    9.233610] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input2
    
    [    9.234148] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096000c1)
    
    [    9.234575] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1/input0
    
    [    9.247726] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    
    [    9.265937] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input3
    
    [    9.267283] generic-usb 0003:413C:3012.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.2-2/input0
    
    [    9.267347] usbcore: registered new interface driver usbhid
    
    [    9.267351] usbhid: USB HID core driver
    
    [    9.313040] [drm] nouveau 0000:01:00.0: ... appears to be valid
    
    [    9.313046] [drm] nouveau 0000:01:00.0: BIT BIOS found
    
    [    9.313051] [drm] nouveau 0000:01:00.0: Bios version 62.94.2a.00
    
    [    9.313055] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
    
    [    9.313059] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    
    [    9.313065] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
    
    [    9.313069] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
    
    [    9.313072] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
    
    [    9.313076] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
    
    [    9.313079] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
    
    [    9.313083] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
    
    [    9.313087] [drm] nouveau 0000:01:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
    
    [    9.313091] [drm] nouveau 0000:01:00.0:   1: 0x00002130: type 0x30 idx 1 tag 0x08
    
    [    9.313094] [drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
    
    [    9.313098] [drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
    
    [    9.313101] [drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
    
    [    9.313106] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
    
    [    9.337954] r8192u_usb: module is from the staging directory, the quality is unknown, you have been warned.
    
    [    9.338238] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
    
    [    9.341247] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
    
    [    9.341256] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE60D
    
    [    9.342330] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE849
    
    [    9.342334] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE8AE
    
    [    9.362184] [drm] nouveau 0000:01:00.0: 0xE8AE: Condition still not met after 20ms, skipping following opcodes
    
    [    9.385317] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
    
    [    9.385325] [drm] nouveau 0000:01:00.0: 3: core 550MHz shader 1375MHz memory 500MHz fanspeed 100%
    
    [    9.385344] [drm] nouveau 0000:01:00.0: c: core 400MHz shader 800MHz memory 499MHz
    
    [    9.400495] ieee80211_crypt: registered algorithm 'NULL'
    
    [    9.400500] ieee80211_crypt: registered algorithm 'TKIP'
    
    [    9.400503] ieee80211_crypt: registered algorithm 'CCMP'
    
    [    9.400506] ieee80211_crypt: registered algorithm 'WEP'
    
    [    9.400508] 
    
    [    9.400509] Linux kernel driver for RTL8192 based WLAN cards
    
    [    9.400512] Copyright (c) 2007-2008, Realsil Wlan
    
    [    9.402472] [TTM] Zone  kernel: Available graphics memory: 432684 kiB.
    
    [    9.402477] [TTM] Zone highmem: Available graphics memory: 1548104 kiB.
    
    [    9.402480] [TTM] Initializing pool allocator.
    
    [    9.402498] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    
    [    9.403941] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    
    [    9.428089] type=1400 audit(1354042574.954:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=431 comm="apparmor_parser"
    
    [    9.428652] type=1400 audit(1354042574.954:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=431 comm="apparmor_parser"
    
    [    9.428941] type=1400 audit(1354042574.954:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=431 comm="apparmor_parser"
    
    [    9.435956] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
    
    [    9.435962] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
    
    [    9.486910] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    
    [    9.486915] [drm] No driver support for vblank timestamp query.
    
    [    9.682748] Bluetooth: Core ver 2.16
    
    [    9.683426] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    
    [    9.688392] NET: Registered protocol family 31
    
    [    9.688398] Bluetooth: HCI device and connection manager initialized
    
    [    9.688403] Bluetooth: HCI socket layer initialized
    
    [    9.688406] Bluetooth: L2CAP socket layer initialized
    
    [    9.688418] Bluetooth: SCO socket layer initialized
    
    [    9.697773] ppdev: user-space parallel port driver
    
    [    9.720092] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    
    [    9.720098] Bluetooth: BNEP filters: protocol multicast
    
    [    9.729545] type=1400 audit(1354042575.254:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=594 comm="apparmor_parser"
    
    [    9.730173] type=1400 audit(1354042575.254:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=594 comm="apparmor_parser"
    
    [    9.730835] Bluetooth: RFCOMM TTY layer initialized
    
    [    9.730846] Bluetooth: RFCOMM socket layer initialized
    
    [    9.730849] Bluetooth: RFCOMM ver 1.11
    
    [    9.791090] init: failsafe main process (558) killed by TERM signal
    
    [    9.920250] type=1400 audit(1354042575.446:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=677 comm="apparmor_parser"
    
    [    9.924639] type=1400 audit(1354042575.450:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=676 comm="apparmor_parser"
    
    [    9.926458] type=1400 audit(1354042575.450:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=677 comm="apparmor_parser"
    
    [    9.926748] type=1400 audit(1354042575.450:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=677 comm="apparmor_parser"
    
    [    9.952844] type=1400 audit(1354042575.478:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=685 comm="apparmor_parser"
    
    [    9.974063] ADDRCONF(NETDEV_UP): eth0: link is not ready
    
    [    9.974932] ADDRCONF(NETDEV_UP): eth0: link is not ready
    
    [    9.984120] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    
    [    9.986463] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    
    [    9.986498] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    
    [   10.041904] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
    
    [   10.042137] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    
    [   10.042377] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    
    [   10.042584] input: HDA Intel Speaker CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    
    [   10.042801] input: HDA Intel Speaker Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    
    [   10.043006] input: HDA Intel Speaker Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    
    [   10.444118] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x330000, bo f1973a00
    
    [   10.444404] fbcon: nouveaufb (fb0) is primary device
    
    [   10.444711] Console: switching to colour frame buffer device 180x56
    
    [   10.444747] fb0: nouveaufb frame buffer device
    
    [   10.444750] drm: registered panic notifier
    
    [   10.444760] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    
    [   10.664575] Dot11d_Init()
    
    [   10.664582] End of initendpoints
    
    [   10.665850] usbcore: registered new interface driver rtl819xU
    
    [   10.935701] rtl819xU:request firmware fail!
    
    [   10.935704] 
    
    [   10.935707] rtl819xU:ERR in init_firmware()
    
    [   10.935708] 
    
    [   10.935711] rtl819xU:ERR!!! rtl8192_adapter_start(): Firmware download is failed
    
    [   10.935713] 
    
    [   10.935715] rtl819xU:ERR!!! _rtl8192_up(): initialization is failed!
    
    [   10.935717] 
    
    [   10.935859] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    
    [   11.169928] rtl819xU:request firmware fail!
    
    [   11.169930] 
    
    [   11.169933] rtl819xU:ERR in init_firmware()
    
    [   11.169935] 
    
    [   11.169938] rtl819xU:ERR!!! rtl8192_adapter_start(): Firmware download is failed
    
    [   11.169939] 
    
    [   11.169942] rtl819xU:ERR!!! _rtl8192_up(): initialization is failed!
    
    [   11.169943] 
    
    [   37.856583] audit_printk_skb: 36 callbacks suppressed
    
    [   37.856587] type=1400 audit(1354042603.382:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1696 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

  4. #14
    Join Date
    Nov 2012
    Beans
    12

    Re: Absolute noob with no internet ready to throw my computer out the window

    The code "grep -i -e warn -e error" did nothing. I have reset my BIOS to defaults and still no success. My computer is a Dell Dimension 9100, not sure if that matters or not but it can't hurt...

  5. #15
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    19,875
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Absolute noob with no internet ready to throw my computer out the window

    [ 9.337954] r8192u_usb: module is from the staging directory, the quality is unknown, you have been warned.

    [ 10.935701] rtl819xU:request firmware fail!

    [ 10.935704]

    [ 10.935707] rtl819xU:ERR in init_firmware()

    [ 10.935708]

    [ 10.935711] rtl819xU:ERR!!! rtl8192_adapter_start(): Firmware download is failed

    [ 10.935713]

    [ 10.935715] rtl819xU:ERR!!! _rtl8192_up(): initialization is failed!
    I assume it is the USB that we're trying to get going. The module r8192u_usb needs firmware and I'm a bit surprised it isn't installed by default. From modinfo:
    Code:
    $ modinfo r8192u_usb
    filename:       /lib/modules/3.5.0-18-generic/kernel/drivers/staging/rtl8192u/r8192u_usb.ko
    description:    Linux driver for Realtek RTL8192 USB WiFi cards
    version:        V 1.1
    license:        GPL
    firmware:       RTL8192U/data.img
    firmware:       RTL8192U/main.img
    firmware:       RTL8192U/boot.img
    license:        GPL
    <snip>
    I have attached a zip file. Please download it and transfer it on a USB key or similar and drag and drop it to your desktop. Right-click and select Extract Here. Now open a terminal and do:
    Code:
    sudo mkdir /lib/firmware/RTL8192U
    sudo cp Desktop/RTL8192U/*   /lib/firmware/RTL8192U
    Insert the device. Is it working now?
    Attached Files Attached Files
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  6. #16
    Join Date
    Nov 2012
    Beans
    12

    Re: Absolute noob with no internet ready to throw my computer out the window

    Quote Originally Posted by chili555 View Post
    I assume it is the USB that we're trying to get going. The module r8192u_usb needs firmware and I'm a bit surprised it isn't installed by default. From modinfo:
    Code:
    $ modinfo r8192u_usb
    filename:       /lib/modules/3.5.0-18-generic/kernel/drivers/staging/rtl8192u/r8192u_usb.ko
    description:    Linux driver for Realtek RTL8192 USB WiFi cards
    version:        V 1.1
    license:        GPL
    firmware:       RTL8192U/data.img
    firmware:       RTL8192U/main.img
    firmware:       RTL8192U/boot.img
    license:        GPL
    <snip>
    I have attached a zip file. Please download it and transfer it on a USB key or similar and drag and drop it to your desktop. Right-click and select Extract Here. Now open a terminal and do:
    Code:
    sudo mkdir /lib/firmware/RTL8192U
    sudo cp Desktop/RTL8192U/*   /lib/firmware/RTL8192U
    Insert the device. Is it working now?
    It worked! Thanks so much!

  7. #17
    Join Date
    Nov 2012
    Beans
    12

    Re: Absolute noob with no internet ready to throw my computer out the window

    Okay it says its connected but I can't load any web pages. Maybe it's a Firefox issue. I usually use chrome so I don't really know how to fix this. Any suggestions?

  8. #18
    Join Date
    Nov 2012
    Beans
    12

    Re: Absolute noob with no internet ready to throw my computer out the window

    Quote Originally Posted by Wobbs91 View Post
    Okay it says its connected but I can't load any web pages. Maybe it's a Firefox issue. I usually use chrome so I don't really know how to fix this. Any suggestions?
    More information: It's not Firefox. My internet works in momentary lapses (I downloaded 8MB in 30 min in Ubuntu Software Center, I have cable internet).

  9. #19
    Join Date
    Feb 2008
    Location
    Planet earth, for now.
    Beans
    Hidden!
    Distro
    Xubuntu

    Re: Absolute noob with no internet ready to throw my computer out the window

    Hmm, the plot thickens. When you right click the network icon and 'Edit Connections', do you have the settings correct in there? Correct security type (WPA, WEP etc), 'Connect Automatically' and 'Available to all users' is checked? If you are running a static IP do you perhaps need to put the DNS details in there, too (if you do then you would be connected to your network (LAN) but can't get to the outside world (WAN)?

    If you have working wireless in Windows or on another machine you could perhaps compare the wireless details in that setup to the one in Ubuntu and see if you can notice any differences.


    Good to hear there's progress. (Cheers Chili555)
    Last edited by Bucky Ball; November 29th, 2012 at 01:42 AM.

  10. #20
    Join Date
    Nov 2012
    Beans
    12

    Re: Absolute noob with no internet ready to throw my computer out the window

    Quote Originally Posted by Bucky Ball View Post
    Hmm, the plot thickens. When you right click the network icon and 'Edit Connections', do you have the settings correct in there? Correct security type (WPA, WEP etc), 'Connect Automatically' and 'Available to all users' is checked? If you are running a static IP do you perhaps need to put the DNS details in there, too (if you do then you would be connected to your network (LAN) but can't get to the outside world (WAN)?

    If you have working wireless in Windows or on another machine you could perhaps compare the wireless details in that setup to the one in Ubuntu and see if you can notice any differences.


    Good to hear there's progress. (Cheers Chili555)
    I looked at all the settings and things seemed to match up pretty nicely so I just ran the update process and just kept reconnecting every time the connection froze up. I guess it helped because after the updates I am now running smoothly. Thanks everyone who helped!

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •