Code:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 72 for .
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos3)/boot/grub on this drive.
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Arch Linux ()
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/syslinux/syslinux.cfg
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb4: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda3 2,048 1,953,523,711 1,953,521,664 5 Extended
/dev/sda5 4,096 1,953,523,711 1,953,519,616 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 128.0 GB, 128035676160 bytes, 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 82,524,159 82,522,112 83 Linux
/dev/sdb2 82,524,160 124,745,727 42,221,568 83 Linux
/dev/sdb3 124,745,728 239,290,367 114,544,640 83 Linux
/dev/sdb4 239,290,368 250,068,991 10,778,624 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda5 bc32ff25-9992-400c-b218-3969d3634be1 ext4 Data
/dev/sdb1 1af23750-127f-4b48-8e87-a6dd41aaac16 ext4
/dev/sdb2 3dda5df6-f211-4b92-8878-838a470b6eb8 ext4 Puppy Linux
/dev/sdb3 b304b009-2cd4-4432-bc5e-b5a878c52bcd ext4 Ubuntu 12.10
/dev/sdb4 deacffb6-c5de-4789-8f14-9e48a1ebdc06 swap
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda5 /export/Kids_Films ext4 (rw,relatime,data=ordered)
/dev/sda5 /export/Movies ext4 (rw,relatime,data=ordered)
/dev/sda5 /export/Video ext4 (rw,relatime,data=ordered)
/dev/sda5 /media/run/sda5 ext4 (rw,relatime,data=ordered)
/dev/sdb1 / ext4 (rw,relatime,data=ordered)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 1af23750-127f-4b48-8e87-a6dd41aaac16
else
search --no-floppy --fs-uuid --set=root 1af23750-127f-4b48-8e87-a6dd41aaac16
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-1af23750-127f-4b48-8e87-a6dd41aaac16' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 1af23750-127f-4b48-8e87-a6dd41aaac16
else
search --no-floppy --fs-uuid --set=root 1af23750-127f-4b48-8e87-a6dd41aaac16
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=1af23750-127f-4b48-8e87-a6dd41aaac16 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
}
menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-1af23750-127f-4b48-8e87-a6dd41aaac16' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 1af23750-127f-4b48-8e87-a6dd41aaac16
else
search --no-floppy --fs-uuid --set=root 1af23750-127f-4b48-8e87-a6dd41aaac16
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=1af23750-127f-4b48-8e87-a6dd41aaac16 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" --class memtest86 --class gnu --class tool {
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 1af23750-127f-4b48-8e87-a6dd41aaac16
else
search --no-floppy --fs-uuid --set=root 1af23750-127f-4b48-8e87-a6dd41aaac16
fi
linux16 ($root)/boot/memtest86+/memtest.bin
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 12.04.1 LTS (12.04)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-b304b009-2cd4-4432-bc5e-b5a878c52bcd' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 b304b009-2cd4-4432-bc5e-b5a878c52bcd
else
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
fi
linux /boot/vmlinuz-3.5.0-17-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.5.0-17-generic
}
submenu 'Advanced options for Ubuntu 12.04.1 LTS (12.04)' $menuentry_id_option 'osprober-gnulinux-advanced-b304b009-2cd4-4432-bc5e-b5a878c52bcd' {
menuentry 'Ubuntu, with Linux 3.5.0-17-generic (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.5.0-17-generic--b304b009-2cd4-4432-bc5e-b5a878c52bcd' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 b304b009-2cd4-4432-bc5e-b5a878c52bcd
else
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
fi
linux /boot/vmlinuz-3.5.0-17-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.5.0-17-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.5.0-17-generic--b304b009-2cd4-4432-bc5e-b5a878c52bcd' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 b304b009-2cd4-4432-bc5e-b5a878c52bcd
else
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
fi
linux /boot/vmlinuz-3.5.0-17-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro recovery nomodeset
initrd /boot/initrd.img-3.5.0-17-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-32-generic (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-32-generic--b304b009-2cd4-4432-bc5e-b5a878c52bcd' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 b304b009-2cd4-4432-bc5e-b5a878c52bcd
else
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
fi
linux /boot/vmlinuz-3.2.0-32-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-32-generic (recovery mode) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-32-generic--b304b009-2cd4-4432-bc5e-b5a878c52bcd' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 b304b009-2cd4-4432-bc5e-b5a878c52bcd
else
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
fi
linux /boot/vmlinuz-3.2.0-32-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-29-generic--b304b009-2cd4-4432-bc5e-b5a878c52bcd' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 b304b009-2cd4-4432-bc5e-b5a878c52bcd
else
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
fi
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode) (on /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.2.0-29-generic--b304b009-2cd4-4432-bc5e-b5a878c52bcd' {
insmod part_msdos
insmod ext2
set root='hd1,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos3 --hint-efi=hd1,msdos3 --hint-baremetal=ahci1,msdos3 b304b009-2cd4-4432-bc5e-b5a878c52bcd
else
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
fi
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-29-generic
}
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "RexBang Linux" {
set root=(hd0,2)
linux /puppy525/vmlinuz pmedia=atahd psubdir=puppy525
initrd /puppy525/initrd.gz
}
EOF
#then sudo update-grub
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/40_custom_old ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom_old ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
UUID=1af23750-127f-4b48-8e87-a6dd41aaac16 / ext4 defaults 0 1
UUID=deacffb6-c5de-4789-8f14-9e48a1ebdc06 swap swap defaults 0 0
/dev/sda5 /media/run/sda5 ext4 defaults 0 0
/media/run/sda5/Films /export/Movies none bind 0 0
/media/run/sda5/Kids_Films /export/Kids_Films none bind 0 0
/media/run/sda5/Video /export/Video none bind 0 0 --------------------------------------------------------------------------------
======================= sdb1/boot/syslinux/syslinux.cfg: =======================
--------------------------------------------------------------------------------
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
#
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# * poweroff.com - shutdown the system
#
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
#
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
#
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 0 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 ro
INITRD ../initramfs-linux.img
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 ro
INITRD ../initramfs-linux-fallback.img
#LABEL windows
# MENU LABEL Windows
# COM32 chain.c32
# APPEND hd0 1
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL off
MENU LABEL Power Off
COMBOOT poweroff.com
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
18.677772522 = 20.055105536 boot/grub/grub.cfg 1
21.214584351 = 22.778986496 boot/initramfs-linux-fallback.img 1
21.191375732 = 22.754066432 boot/initramfs-linux.img 1
8.746276855 = 9.391243264 boot/vmlinuz-linux 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
8.126136780 = 8.725372928 boot/syslinux/syslinux.cfg 1
=========================== sdb3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1366x768
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
set locale_dir=($root)/boot/grub/locale
set lang=en_GB
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
linux /boot/vmlinuz-3.5.0-17-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.5.0-17-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
echo 'Loading Linux 3.5.0-17-generic ...'
linux /boot/vmlinuz-3.5.0-17-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-17-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
linux /boot/vmlinuz-3.2.0-32-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
echo 'Loading Linux 3.2.0-32-generic ...'
linux /boot/vmlinuz-3.2.0-32-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
echo 'Loading Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set=root b304b009-2cd4-4432-bc5e-b5a878c52bcd
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-1af23750-127f-4b48-8e87-a6dd41aaac16 (on /dev/sdb1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 1af23750-127f-4b48-8e87-a6dd41aaac16
linux /boot/vmlinuz-linux root=UUID=1af23750-127f-4b48-8e87-a6dd41aaac16 ro quiet
initrd /boot/initramfs-linux.img
}
menuentry "Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-1af23750-127f-4b48-8e87-a6dd41aaac16 (on /dev/sdb1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root 1af23750-127f-4b48-8e87-a6dd41aaac16
linux /boot/vmlinuz-linux root=UUID=1af23750-127f-4b48-8e87-a6dd41aaac16 ro quiet
initrd /boot/initramfs-linux-fallback.img
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "RexBang Linux" {
set root=(hd0,2)
linux /puppy525/vmlinuz pmedia=atahd psubdir=puppy525
initrd /puppy525/initrd.gz
}
EOF
#then sudo update-grub
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb3 during installation
UUID=b304b009-2cd4-4432-bc5e-b5a878c52bcd / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb4 during installation
UUID=deacffb6-c5de-4789-8f14-9e48a1ebdc06 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
93.777248383 = 100.692553728 boot/grub/core.img 1
93.817581177 = 100.735860736 boot/grub/grub.cfg 1
60.902778625 = 65.393860608 boot/initrd.img-3.2.0-29-generic 2
62.160690308 = 66.744532992 boot/initrd.img-3.2.0-32-generic 1
93.723983765 = 100.635361280 boot/initrd.img-3.5.0-17-generic 1
107.675128937 = 115.615289344 boot/vmlinuz-3.2.0-29-generic 1
60.753650665 = 65.233735680 boot/vmlinuz-3.2.0-32-generic 1
107.701030731 = 115.643101184 boot/vmlinuz-3.5.0-17-generic 1
60.902778625 = 65.393860608 initrd.img.old 2
60.753650665 = 65.233735680 vmlinuz 1
107.675128937 = 115.615289344 vmlinuz.old 1
========= Devices which don't seem to have a corresponding hard drive: =========
sdc
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
No volume groups found
mdadm: No arrays found in config file or automatically
My question is, I don't need both Grubs so can I just delete one? If so how do I go about it?
Bookmarks