Running an HP Envy 15 and latest version of Ubunutu (11). Have tried every tip I've found on forums (disabling fan always on in BIOS, installed lm-sensors, lwmcontrol doesn't seem to work with laptop). If I run "sensors" or "acpi -V" I get reasonable values, e.g.
Battery 0: Full, 100%
Battery 0: design capacity 4182 mAh, last full capacity 4160 mAh = 99%
Adapter 0: on-line
Thermal 0: ok, 57.0 degrees C
Thermal 0: trip point 0 switches to mode hot at temperature 97.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 135.0 degrees C
Cooling 0: LCD 4 of 10
Cooling 1: LCD 4 of 10
Cooling 2: Processor 0 of 10
Cooling 3: Processor 0 of 10
Cooling 4: Processor 0 of 10
Cooling 5: Processor 0 of 10
but even though the temperature is nominal, the fans run full blast. I ran Ubuntu a few versions back without this problem so it's a bit disheartening, anyone with experience or suggestions?
Adv Reply
Bookmarks