Hi there
I am trying to connect my fresh xubuntu 12.10 installation to a windows network but the connection only seems to work for 10-20 seconds and then it is unusable. By this I mean that I can connect to http, ssh, rdp for those first few seconds then the connections all time out. Network manager keeps the VPN connection active for a another few minutes then it disconnects.
I have tested the connection with the same gateway/credentials on a Windows 7 machine and it worked first time, thus ruling out problems on the server side.
I have tried following format c's guide in http://ubuntuforums.org/showpost.php...63&postcount=3 but the connection is just not workable.
At first my routing table looked like this:
Code:
Kernel IP routing table
0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0
81.2.x.x 192.168.0.1 255.255.255.255 UGH 0 0 0 wlan0
81.2.x.x 192.168.0.1 255.255.255.255 UGH 0 0 0 wlan0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 ppp0
192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 wlan0
192.168.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
I had to add 192.168.0.0 | 255.255.255 | 81.2.x.x into the routes configuration for the VPN connection so I could connect to devices on the network other than 192.168.0.1. After these additions the routing table looks like this:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0
81.2.x.x 192.168.0.1 255.255.255.255 UGH 0 0 0 wlan0
81.2.x.x 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
81.2.x.x 192.168.0.1 255.255.255.255 UGH 0 0 0 wlan0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 ppp0
192.168.0.0 81.2.119.34 255.255.255.0 UG 0 0 0 ppp0
192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 wlan0
192.168.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
Any ideas why I can only use the connection for <20 seconds before it gives up?
Any help would be greatly appreciated!
Bookmarks