Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Ubuntu crashes: "Could not write byte: broken pipe"

  1. #1
    Join Date
    May 2009
    Beans
    63

    Ubuntu crashes: "Could not write byte: broken pipe"

    Hi,

    Once so often, my Ubuntu 12.04 crashes, I get a black sreen with the message: "Could not write byte: broken pipe". A few weeks ago, I did a fresh install hoping that this would solve the problem, but now it happened again.

    The computer totally blocks and the only way to get out of it is to turn off the computer (no keyboard keys respond). I then even have problems restarting (light goes on, but the computer even doesn't make it to the bios message & doesn't access the hard disk. just a black screen. Only after waiting for half an hour before restart, it loads up again.

    I've a Acer aspire, AX3810, ATI radeon card, , 6 gig RAM. Since the fresh install, I have installed no new software, except thunderbird, clementine, skype and vlc media player. I don't get this problem on windows (I've a double boot)

    I searched on the forum, and get all kinds of suggestions: nvidia problem, disks not mounted, etc. So I am confused. Is there any straight forward and simple way to solve this issue?

    Thanks for any help you might be able to give.

  2. #2
    Join Date
    Feb 2012
    Location
    el_GR
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: Ubuntu crashes: "Could not write byte: broken pipe"

    Hi ,

    If you can login to Ubuntu , open a terminal and give here the full dmesg log.

    Code:
    dmesg >> dmesg.txt
    gedit dmesg.txt
    Copy-paste here the full log of dmesg.

    PLEASE put the result between the brackets [code]Here[/code] so can be readable.

    The log is very LONG , and we can exterminate for further errors - details that might help.

    This message Could not write byte: broken pipe usually refers to a broken filesystem , but is not for sure.

    Thanks
    # How to mark the Thread as [SOLVED] when done.
    # Ubuntu Greek Community
    # Gain 20GB of space on copy.com when sign up with my referral link.

  3. #3
    Join Date
    May 2009
    Beans
    63

    Re: Ubuntu crashes: "Could not write byte: broken pipe"

    thanks, Nikth, for your offer to help. The result is pasted below. (but today I didn't have any problem with my computer crashing.

    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.2.0-31-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50-Ubuntu SMP Fri Sep 7 16:39:45 UTC 2012 (Ubuntu 3.2.0-31.50-generic-pae 3.2.28)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
    [    0.000000]  BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01100 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed02000 - 00000000fed14c00 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI present.
    [    0.000000] DMI: Acer Aspire X3810/WG43M, BIOS P01-A3 05/26/2009
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x1000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-DFFFF uncachable
    [    0.000000]   E0000-EFFFF write-through
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 1C0000000 mask FC0000000 uncachable
    [    0.000000]   1 base 000000000 mask E00000000 write-back
    [    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] original variable MTRRs
    [    0.000000] reg 0, base: 7GB, range: 1GB, type UC
    [    0.000000] reg 1, base: 0GB, range: 8GB, type WB
    [    0.000000] reg 2, base: 3GB, range: 1GB, type UC
    [    0.000000] total RAM covered: 6144M
    [    0.000000] Found optimal setting for mtrr clean up
    [    0.000000]  gran_size: 64K     chunk_size: 64K     num_reg: 4      lose cover RAM: 0G
    [    0.000000] New variable MTRRs
    [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
    [    0.000000] reg 2, base: 4GB, range: 2GB, type WB
    [    0.000000] reg 3, base: 6GB, range: 1GB, type WB
    [    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] found SMP MP-table at [c00ff780] ff780
    [    0.000000] initial memory mapped : 0 - 02000000
    [    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
    [    0.000000]  0000000000 - 0000200000 page 4k
    [    0.000000]  0000200000 - 0037a00000 page 2M
    [    0.000000]  0037a00000 - 0037bfe000 page 4k
    [    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
    [    0.000000] RAMDISK: 364ee000 - 3726f000
    [    0.000000] ACPI: RSDP 000fa770 00024 (v02 ACPIAM)
    [    0.000000] ACPI: XSDT bff90100 0006C (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: FACP bff90290 000F4 (v04 052609 FACP2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: DSDT bff905c0 061D5 (v02   P01-   P01-A3 000000A3 INTL 20051117)
    [    0.000000] ACPI: FACS bff9e000 00040
    [    0.000000] ACPI: APIC bff90390 0006C (v02 052609 APIC2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: MCFG bff90400 0003C (v01 052609 OEMMCFG  20090526 MSFT 00000097)
    [    0.000000] ACPI: SLIC bff90440 00176 (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: OEMB bff9e040 00072 (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: HPET bff9a5c0 00038 (v01 052609 OEMHPET  20090526 MSFT 00000097)
    [    0.000000] ACPI: GSCI bff9e0c0 02024 (v01 052609 GMCHSCI  20090526 MSFT 00000097)
    [    0.000000] ACPI: AWMI bffa00f0 0004E (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: SSDT bffa0940 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 6276MB HIGHMEM available.
    [    0.000000] 891MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 37bfe000
    [    0.000000]   low ram: 0 - 37bfe000
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x00037bfe
    [    0.000000]   HighMem  0x00037bfe -> 0x001c0000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009e
    [    0.000000]     0: 0x00000100 -> 0x000bff90
    [    0.000000]     0: 0x00100000 -> 0x001c0000
    [    0.000000] On node 0 totalpages: 1572638
    [    0.000000] free_area_init_node: node 0, pgdat c1868a80, node_mem_map f2cee200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3950 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1752 pages used for memmap
    [    0.000000]   Normal zone: 222502 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 12553 pages used for memmap
    [    0.000000]   HighMem zone: 1331849 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34240 r0 d23104 u57344
    [    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1558301
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic-pae root=UUID=3169b696-02b9-4593-b5f7-30c72e816dc7 ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 29359872 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00037bfe:001c0000)
    [    0.000000] Memory: 6179240k/7340032k available (5818k kernel code, 111312k reserved, 2846k data, 740k init, 5377608k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    [    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    [    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
    [    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
    [    0.000000]       .data : 0xc15ae8bc - 0xc1876280   (2846 kB)
    [    0.000000]       .text : 0xc1000000 - 0xc15ae8bc   (5818 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:2304 nr_irqs:712 16
    [    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2327.650 MHz processor.
    [    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.30 BogoMIPS (lpj=9310600)
    [    0.004006] pid_max: default: 32768 minimum: 301
    [    0.004026] Security Framework initialized
    [    0.004042] AppArmor: AppArmor initialized
    [    0.004043] Yama: becoming mindful.
    [    0.004094] Mount-cache hash table entries: 512
    [    0.004217] Initializing cgroup subsys cpuacct
    [    0.004223] Initializing cgroup subsys memory
    [    0.004230] Initializing cgroup subsys devices
    [    0.004232] Initializing cgroup subsys freezer
    [    0.004234] Initializing cgroup subsys blkio
    [    0.004240] Initializing cgroup subsys perf_event
    [    0.004265] CPU: Physical Processor ID: 0
    [    0.004266] CPU: Processor Core ID: 0
    [    0.004269] mce: CPU supports 6 MCE banks
    [    0.004277] CPU0: Thermal monitoring enabled (TM2)
    [    0.004280] using mwait in idle threads.
    [    0.009714] ACPI: Core revision 20110623
    [    0.016011] ftrace: allocating 26555 entries in 52 pages
    [    0.024042] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.024389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.066480] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
    [    0.068003] APIC calibration not consistent with PM-Timer: 139ms instead of 100ms
    [    0.068003] APIC delta adjusted to PM-Timer: 2078348 (2909656)
    [    0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [    0.068003] ... version:                2
    [    0.068003] ... bit width:              40
    [    0.068003] ... generic registers:      2
    [    0.068003] ... value mask:             000000ffffffffff
    [    0.068003] ... max period:             000000007fffffff
    [    0.068003] ... fixed-purpose events:   3
    [    0.068003] ... event mask:             0000000700000003
    [    0.068003] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.068003] CPU 1 irqstacks, hard=f7512000 soft=f7514000
    [    0.068003] Booting Node   0, Processors  #1
    [    0.068003] smpboot cpu 1: start_ip = 9a000
    [    0.008000] Initializing CPU#1
    [    0.156032] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.156123] CPU 2 irqstacks, hard=f7520000 soft=f7522000
    [    0.156125]  #2
    [    0.156127] smpboot cpu 2: start_ip = 9a000
    [    0.008000] Initializing CPU#2
    [    0.248031] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.248117] CPU 3 irqstacks, hard=f752e000 soft=f7538000
    [    0.248119]  #3 Ok.
    [    0.248120] smpboot cpu 3: start_ip = 9a000
    [    0.008000] Initializing CPU#3
    [    0.340037] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.340060] Brought up 4 CPUs
    [    0.340063] Total of 4 processors activated (18662.90 BogoMIPS).
    [    0.343004] devtmpfs: initialized
    [    0.343004] EVM: security.selinux
    [    0.343004] EVM: security.SMACK64
    [    0.343004] EVM: security.capability
    [    0.343004] PM: Registering ACPI NVS region at bff9e000 (270336 bytes)
    [    0.344576] print_constraints: dummy: 
    [    0.344603] RTC time: 18:58:08, date: 10/09/12
    [    0.344640] NET: Registered protocol family 16
    [    0.344649] Trying to unpack rootfs image as initramfs...
    [    0.344771] EISA bus registered
    [    0.344798] ACPI: bus type pci registered
    [    0.344860] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.344863] PCI: not using MMCONFIG
    [    0.344936] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
    [    0.344996] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    [    0.344998] PCI: Using configuration type 1 for base access
    [    0.346082] bio: create slab <bio-0> at 0
    [    0.346082] ACPI: Added _OSI(Module Device)
    [    0.346082] ACPI: Added _OSI(Processor Device)
    [    0.346082] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.346082] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.346082] ACPI: EC: Look up EC in DSDT
    [    0.348956] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.351650] ACPI: SSDT bffa0140 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.351961] ACPI: Dynamic OEM Table Load:
    [    0.351964] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.352255] ACPI: SSDT bffa0340 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.352564] ACPI: Dynamic OEM Table Load:
    [    0.352567] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.352843] ACPI: SSDT bffa0540 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.353154] ACPI: Dynamic OEM Table Load:
    [    0.353157] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.353426] ACPI: SSDT bffa0740 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.353739] ACPI: Dynamic OEM Table Load:
    [    0.353742] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.353929] ACPI: Interpreter enabled
    [    0.353935] ACPI: (supports S0 S3 S4 S5)
    [    0.353954] ACPI: Using IOAPIC for interrupt routing
    [    0.353979] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.355173] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [    0.355175] PCI: Using MMCONFIG for extended config space
    [    0.360654] ACPI: No dock devices found.
    [    0.360658] HEST: Table not found.
    [    0.360662] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.360746] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.360924] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
    [    0.360926] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
    [    0.360929] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.360931] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [    0.360934] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [    0.360936] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
    [    0.360949] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [    0.360991] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [    0.361030] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [    0.361034] pci 0000:00:01.0: PME# disabled
    [    0.361072] pci 0000:00:19.0: [8086:10ce] type 0 class 0x000200
    [    0.361089] pci 0000:00:19.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
    [    0.361097] pci 0000:00:19.0: reg 14: [mem 0xfe9de000-0xfe9defff]
    [    0.361106] pci 0000:00:19.0: reg 18: [io  0xcc00-0xcc1f]
    [    0.361165] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [    0.361168] pci 0000:00:19.0: PME# disabled
    [    0.361186] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [    0.361226] pci 0000:00:1a.0: reg 20: [io  0xc880-0xc89f]
    [    0.361275] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [    0.361315] pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
    [    0.361363] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [    0.361403] pci 0000:00:1a.2: reg 20: [io  0xc480-0xc49f]
    [    0.361459] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [    0.361479] pci 0000:00:1a.7: reg 10: [mem 0xfe9dc000-0xfe9dc3ff]
    [    0.361565] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [    0.361569] pci 0000:00:1a.7: PME# disabled
    [    0.361592] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [    0.361606] pci 0000:00:1b.0: reg 10: [mem 0xfe9d8000-0xfe9dbfff 64bit]
    [    0.361669] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.361672] pci 0000:00:1b.0: PME# disabled
    [    0.361691] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [    0.361756] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.361760] pci 0000:00:1c.0: PME# disabled
    [    0.361785] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [    0.361826] pci 0000:00:1d.0: reg 20: [io  0xc400-0xc41f]
    [    0.361876] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [    0.361916] pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
    [    0.361965] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [    0.362004] pci 0000:00:1d.2: reg 20: [io  0xc000-0xc01f]
    [    0.362060] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [    0.362080] pci 0000:00:1d.7: reg 10: [mem 0xfe9d6000-0xfe9d63ff]
    [    0.362167] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.362171] pci 0000:00:1d.7: PME# disabled
    [    0.362191] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [    0.362249] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
    [    0.362361] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
    [    0.362379] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
    [    0.362386] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
    [    0.362394] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
    [    0.362401] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
    [    0.362409] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb41f]
    [    0.362417] pci 0000:00:1f.2: reg 24: [mem 0xfe9d4000-0xfe9d47ff]
    [    0.362462] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.362465] pci 0000:00:1f.2: PME# disabled
    [    0.362481] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [    0.362495] pci 0000:00:1f.3: reg 10: [mem 0xfe9d3c00-0xfe9d3cff 64bit]
    [    0.362515] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
    [    0.362571] pci 0000:01:00.0: [1002:954f] type 0 class 0x000300
    [    0.362585] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.362595] pci 0000:01:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff 64bit]
    [    0.362603] pci 0000:01:00.0: reg 20: [io  0xd000-0xd0ff]
    [    0.362615] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
    [    0.362646] pci 0000:01:00.0: supports D1 D2
    [    0.362665] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
    [    0.362678] pci 0000:01:00.1: reg 10: [mem 0xfeaec000-0xfeaeffff 64bit]
    [    0.362737] pci 0000:01:00.1: supports D1 D2
    [    0.362766] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.362769] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.362773] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.362777] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.362832] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
    [    0.362854] pci 0000:02:00.0: reg 10: [mem 0xfebff800-0xfebfffff 64bit]
    [    0.362866] pci 0000:02:00.0: reg 18: [io  0xe800-0xe8ff]
    [    0.362959] pci 0000:02:00.0: supports D2
    [    0.362961] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
    [    0.362965] pci 0000:02:00.0: PME# disabled
    [    0.368041] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.368045] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.368049] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.368113] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [    0.368122] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.368125] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.368127] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.368130] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [    0.368132] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [    0.368135] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
    [    0.368157] pci_bus 0000:00: on NUMA node 0
    [    0.368161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.368376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [    0.368427]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.368431]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.368432] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.377225] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
    [    0.377274] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
    [    0.377317] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
    [    0.377364] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
    [    0.377410] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15)
    [    0.377456] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
    [    0.377503] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
    [    0.377549] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
    [    0.377661] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.377661] vgaarb: loaded
    [    0.377661] vgaarb: bridge control possible 0000:01:00.0
    [    0.377661] i2c-core: driver [aat2870] using legacy suspend method
    [    0.377661] i2c-core: driver [aat2870] using legacy resume method
    [    0.377661] SCSI subsystem initialized
    [    0.377661] libata version 3.00 loaded.
    [    0.377661] usbcore: registered new interface driver usbfs
    [    0.377661] usbcore: registered new interface driver hub
    [    0.377661] usbcore: registered new device driver usb
    [    0.377661] PCI: Using ACPI for IRQ routing
    [    0.377661] PCI: pci_cache_line_size set to 64 bytes
    [    0.377661] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
    [    0.377661] reserve RAM buffer: 00000000bff90000 - 00000000bfffffff 
    [    0.377661] NetLabel: Initializing
    [    0.377661] NetLabel:  domain hash size = 128
    [    0.377661] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.377661] NetLabel:  unlabeled traffic allowed by default
    [    0.377661] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [    0.377661] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [    0.377661] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [    0.392155] Switching to clocksource hpet
    [    0.400285] AppArmor: AppArmor Filesystem Enabled
    [    0.400313] pnp: PnP ACPI init
    [    0.400331] ACPI: bus type pnp registered
    [    0.400447] pnp 00:00: [bus 00-ff]
    [    0.400450] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.400453] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.400455] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.400457] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.400460] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [    0.400462] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [    0.400464] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
    [    0.400520] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.400530] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [    0.400532] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [    0.400587] system 00:01: [mem 0xfed14000-0xfed19fff] could not be reserved
    [    0.400589] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [    0.400593] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.400629] pnp 00:02: [dma 4]
    [    0.400631] pnp 00:02: [io  0x0000-0x000f]
    [    0.400633] pnp 00:02: [io  0x0081-0x0083]
    [    0.400635] pnp 00:02: [io  0x0087]
    [    0.400637] pnp 00:02: [io  0x0089-0x008b]
    [    0.400639] pnp 00:02: [io  0x008f]
    [    0.400641] pnp 00:02: [io  0x00c0-0x00df]
    [    0.400668] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.400679] pnp 00:03: [io  0x0070-0x0071]
    [    0.400689] pnp 00:03: [irq 8]
    [    0.400718] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.400746] pnp 00:04: [io  0x0060]
    [    0.400749] pnp 00:04: [io  0x0064]
    [    0.400754] pnp 00:04: [irq 1]
    [    0.400782] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.400826] pnp 00:05: [irq 12]
    [    0.400855] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [    0.400864] pnp 00:06: [io  0x0061]
    [    0.400894] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.400903] pnp 00:07: [io  0x00f0-0x00ff]
    [    0.400907] pnp 00:07: [irq 13]
    [    0.400935] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.401330] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
    [    0.401333] pnp 00:08: [io  0x0a00-0x0a0f]
    [    0.401335] pnp 00:08: [io  0x0a10-0x0a1f]
    [    0.401339] pnp 00:08: [io  0x0a20-0x0a2f]
    [    0.401341] pnp 00:08: [io  0x0a30-0x0a3f]
    [    0.401391] system 00:08: [io  0x0a00-0x0a0f] has been reserved
    [    0.401394] system 00:08: [io  0x0a10-0x0a1f] has been reserved
    [    0.401396] system 00:08: [io  0x0a20-0x0a2f] has been reserved
    [    0.401399] system 00:08: [io  0x0a30-0x0a3f] has been reserved
    [    0.401402] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401511] pnp 00:09: [io  0x0010-0x001f]
    [    0.401513] pnp 00:09: [io  0x0022-0x003f]
    [    0.401515] pnp 00:09: [io  0x0044-0x005f]
    [    0.401517] pnp 00:09: [io  0x0062-0x0063]
    [    0.401519] pnp 00:09: [io  0x0065-0x006f]
    [    0.401521] pnp 00:09: [io  0x0072-0x007f]
    [    0.401523] pnp 00:09: [io  0x0080]
    [    0.401525] pnp 00:09: [io  0x0084-0x0086]
    [    0.401527] pnp 00:09: [io  0x0088]
    [    0.401529] pnp 00:09: [io  0x008c-0x008e]
    [    0.401531] pnp 00:09: [io  0x0090-0x009f]
    [    0.401533] pnp 00:09: [io  0x00a2-0x00bf]
    [    0.401535] pnp 00:09: [io  0x00e0-0x00ef]
    [    0.401537] pnp 00:09: [io  0x04d0-0x04d1]
    [    0.401539] pnp 00:09: [io  0x0800-0x087f]
    [    0.401541] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
    [    0.401543] pnp 00:09: [io  0x0500-0x057f]
    [    0.401545] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [    0.401547] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [    0.401549] pnp 00:09: [mem 0xfed40000-0xfed8ffff]
    [    0.401610] system 00:09: [io  0x04d0-0x04d1] has been reserved
    [    0.401613] system 00:09: [io  0x0800-0x087f] has been reserved
    [    0.401615] system 00:09: [io  0x0500-0x057f] has been reserved
    [    0.401618] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.401621] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.401624] system 00:09: [mem 0xfed40000-0xfed8ffff] has been reserved
    [    0.401627] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401681] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
    [    0.401712] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.401761] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
    [    0.401763] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [    0.401795] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.401836] pnp 00:0c: [mem 0xffc00000-0xffefffff]
    [    0.401885] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
    [    0.401888] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401966] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
    [    0.401968] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
    [    0.402018] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.402021] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.402024] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.402068] pnp 00:0e: [mem 0xe0000000-0xefffffff]
    [    0.402116] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.402119] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.402294] pnp 00:0f: [mem 0x00000000-0x0009ffff]
    [    0.402296] pnp 00:0f: [mem 0x000c0000-0x000cffff]
    [    0.402298] pnp 00:0f: [mem 0x000e0000-0x000fffff]
    [    0.402301] pnp 00:0f: [mem 0x00100000-0xbfffffff]
    [    0.402303] pnp 00:0f: [mem 0xfed90000-0xffffffff]
    [    0.402363] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.402366] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
    [    0.402368] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.402371] system 00:0f: [mem 0x00100000-0xbfffffff] could not be reserved
    [    0.402374] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
    [    0.402377] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.402506] pnp: PnP ACPI: found 16 devices
    [    0.402508] ACPI: ACPI bus type pnp unregistered
    [    0.402511] PnPBIOS: Disabled by ACPI PNP
    [    0.440569] PCI: max bus depth: 1 pci_try_num: 2
    [    0.440600] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440604] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.440606] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.440610] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.440613] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.440617] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.440620] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.440625] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.440629] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440634] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [    0.440661] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.440664] pci 0000:00:01.0: setting latency timer to 64
    [    0.440674] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.440678] pci 0000:00:1c.0: setting latency timer to 64
    [    0.440684] pci 0000:00:1e.0: setting latency timer to 64
    [    0.440688] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.440690] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.440692] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.440695] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.440697] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.440699] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.440702] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
    [    0.440704] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [    0.440707] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.440709] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
    [    0.440712] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [    0.440714] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440717] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
    [    0.440719] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
    [    0.440721] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.440723] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.440726] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.440728] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.440769] NET: Registered protocol family 2
    [    0.440841] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.441057] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.441384] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.441550] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.441552] TCP reno registered
    [    0.441555] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.441563] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.441645] NET: Registered protocol family 1
    [    0.441674] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.441690] pci 0000:00:1a.0: PCI INT A disabled
    [    0.441704] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.441719] pci 0000:00:1a.1: PCI INT B disabled
    [    0.441729] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.441744] pci 0000:00:1a.2: PCI INT D disabled
    [    0.441755] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.441785] pci 0000:00:1a.7: PCI INT C disabled
    [    0.441800] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.441814] pci 0000:00:1d.0: PCI INT A disabled
    [    0.441821] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.441836] pci 0000:00:1d.1: PCI INT B disabled
    [    0.441842] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.441857] pci 0000:00:1d.2: PCI INT C disabled
    [    0.441865] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.441878] pci 0000:00:1d.7: PCI INT A disabled
    [    0.441892] pci 0000:01:00.0: Boot video device
    [    0.441900] PCI: CLS 32 bytes, default 64
    [    0.442390] audit: initializing netlink socket (disabled)
    [    0.442399] type=2000 audit(1349809087.436:1): initialized
    [    0.463394] highmem bounce pool size: 64 pages
    [    0.463400] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.466033] VFS: Disk quotas dquot_6.5.2
    [    0.466095] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.466676] fuse init (API version 7.17)
    [    0.466792] msgmni has been set to 1565
    [    0.467341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.467386] io scheduler noop registered
    [    0.467388] io scheduler deadline registered
    [    0.467400] io scheduler cfq registered (default)
    [    0.467509] pcieport 0000:00:01.0: setting latency timer to 64
    [    0.467540] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [    0.467587] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.467621] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [    0.467700] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.467724] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.467785] intel_idle: MWAIT substates: 0x20
    [    0.467787] intel_idle: does not run on family 6 model 23
    [    0.467869] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.467874] ACPI: Power Button [PWRB]
    [    0.467919] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.467923] ACPI: Power Button [PWRF]
    [    0.470589] ERST: Table is not found!
    [    0.470591] GHES: HEST is not enabled!
    [    0.470689] isapnp: Scanning for PnP cards...
    [    0.470693] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    0.631366] Freeing initrd memory: 13828k freed
    [    0.823572] isapnp: No Plug & Play device found
    [    0.876587] Linux agpgart interface v0.103
    [    0.878701] brd: module loaded
    [    0.879728] loop: module loaded
    [    0.879866] ahci 0000:00:1f.2: version 3.0
    [    0.879877] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.879915] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [    0.879959] ahci: SSS flag set, parallel bus scan disabled
    [    0.879990] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [    0.879994] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
    [    0.879998] ahci 0000:00:1f.2: setting latency timer to 64
    [    0.920605] scsi0 : ahci
    [    0.920717] scsi1 : ahci
    [    0.920813] scsi2 : ahci
    [    0.920910] scsi3 : ahci
    [    0.921009] scsi4 : ahci
    [    0.921111] scsi5 : ahci
    [    0.921275] ata1: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4100 irq 42
    [    0.921278] ata2: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4180 irq 42
    [    0.921280] ata3: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4200 irq 42
    [    0.921283] ata4: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4280 irq 42
    [    0.921286] ata5: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4300 irq 42
    [    0.921288] ata6: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4380 irq 42
    [    0.921702] Fixed MDIO Bus: probed
    [    0.921722] tun: Universal TUN/TAP device driver, 1.6
    [    0.921724] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.921804] PPP generic driver version 2.4.2
    [    0.921960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.921976] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.921989] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    0.921993] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    0.922062] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    0.922084] ehci_hcd 0000:00:1a.7: debug port 1
    [    0.925951] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [    0.925966] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9dc000
    [    0.940015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [    0.940179] hub 1-0:1.0: USB hub found
    [    0.940184] hub 1-0:1.0: 6 ports detected
    [    0.940261] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.940271] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.940274] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.940339] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    0.940360] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.944234] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    0.944248] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9d6000
    [    0.960014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.960155] hub 2-0:1.0: USB hub found
    [    0.960159] hub 2-0:1.0: 6 ports detected
    [    0.960232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.960245] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.960260] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.960267] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [    0.960270] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    0.960332] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    0.960362] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
    [    0.960510] hub 3-0:1.0: USB hub found
    [    0.960514] hub 3-0:1.0: 2 ports detected
    [    0.960577] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.960585] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    0.960588] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    0.960662] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    0.960693] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
    [    0.960840] hub 4-0:1.0: USB hub found
    [    0.960843] hub 4-0:1.0: 2 ports detected
    [    0.960912] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.960918] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [    0.960921] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [    0.960987] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [    0.961017] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
    [    0.961163] hub 5-0:1.0: USB hub found
    [    0.961166] hub 5-0:1.0: 2 ports detected
    [    0.961226] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.961232] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.961235] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.961302] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [    0.961322] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
    [    0.961468] hub 6-0:1.0: USB hub found
    [    0.961472] hub 6-0:1.0: 2 ports detected
    [    0.961538] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.961545] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.961547] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.961614] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [    0.961635] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
    [    0.961780] hub 7-0:1.0: USB hub found
    [    0.961784] hub 7-0:1.0: 2 ports detected
    [    0.961848] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.961855] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.961858] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.961923] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [    0.961944] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
    [    0.962096] hub 8-0:1.0: USB hub found
    [    0.962100] hub 8-0:1.0: 2 ports detected
    [    0.962214] usbcore: registered new interface driver libusual
    [    0.962273] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [    0.962634] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.962641] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.962799] mousedev: PS/2 mouse device common for all mice
    [    0.963014] rtc_cmos 00:03: RTC can wake from S4
    [    0.963137] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    0.963159] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    0.963218] device-mapper: uevent: version 1.0.3
    [    0.963315] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    [    0.963347] EISA: Probing bus 0 at eisa.0
    [    0.963349] EISA: Cannot allocate resource for mainboard
    [    0.963351] Cannot allocate resource for EISA slot 1
    [    0.963353] Cannot allocate resource for EISA slot 2
    [    0.963354] Cannot allocate resource for EISA slot 3
    [    0.963356] Cannot allocate resource for EISA slot 4
    [    0.963358] Cannot allocate resource for EISA slot 5
    [    0.963359] Cannot allocate resource for EISA slot 6
    [    0.963361] Cannot allocate resource for EISA slot 7
    [    0.963363] Cannot allocate resource for EISA slot 8
    [    0.963364] EISA: Detected 0 cards.
    [    0.963373] cpufreq-nforce2: No nForce2 chipset.
    [    0.963375] cpuidle: using governor ladder
    [    0.963377] cpuidle: using governor menu
    [    0.963379] EFI Variables Facility v0.08 2004-May-17
    [    0.963643] TCP cubic registered
    [    0.963770] NET: Registered protocol family 10
    [    0.964343] NET: Registered protocol family 17
    [    0.964347] Registering the dns_resolver key type
    [    0.964371] Using IPI No-Shortcut mode
    [    0.964533] PM: Hibernation image not present or could not be loaded.
    [    0.964544] registered taskstats version 1
    [    0.971419]   Magic number: 0:54:999
    [    0.971460] system 00:01: hash matches
    [    0.971462]  pnp0: hash matches
    [    0.971523] rtc_cmos 00:03: setting system clock to 2012-10-09 18:58:09 UTC (1349809089)
    [    0.972586] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.972588] EDD information not available.
    [    0.979396] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.240021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.243031] ata1.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
    [    1.246909] ata1.00: configured for UDMA/100
    [    1.252016] usb 1-4: new high-speed USB device number 2 using ehci_hcd
    [    1.257625] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH40F     MG01 PQ: 0 ANSI: 5
    [    1.266069] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.266072] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.266219] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    1.266302] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    1.440015] Refined TSC clocksource calibration: 2327.754 MHz.
    [    1.440020] Switching to clocksource tsc
    [    1.568012] usb 2-3: new high-speed USB device number 2 using ehci_hcd
    [    1.584015] ata2: SATA link down (SStatus 0 SControl 300)
    [    1.704392] Initializing USB Mass Storage driver...
    [    1.704558] scsi6 : usb-storage 2-3:1.0
    [    1.704636] usbcore: registered new interface driver usb-storage
    [    1.704638] USB Mass Storage support registered.
    [    1.904014] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.940013] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [    2.224015] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    2.242239] ata4.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
    [    2.242243] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [    2.243260] ata4.00: configured for UDMA/133
    [    2.243381] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
    [    2.243495] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    2.243541] sd 3:0:0:0: Attached scsi generic sg1 type 0
    [    2.243562] sd 3:0:0:0: [sda] Write Protect is off
    [    2.243565] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.243589] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.286130]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    2.286610] sd 3:0:0:0: [sda] Attached SCSI disk
    [    2.560014] ata5: SATA link down (SStatus 0 SControl 300)
    [    2.704832] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
    [    2.705454] scsi 6:0:0:1: Direct-Access     Multiple Flash Reader     1.05 PQ: 0 ANSI: 0
    [    2.706262] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [    2.706462] sd 6:0:0:1: Attached scsi generic sg3 type 0
    [    2.709933] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [    2.710555] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [    2.880021] ata6: SATA link down (SStatus 0 SControl 300)
    [    2.880115] Freeing unused kernel memory: 740k freed
    [    2.880383] Write protecting the kernel text: 5820k
    [    2.880412] Write protecting the kernel read-only data: 2376k
    [    2.880414] NX-protecting the kernel data: 4420k
    [    2.897294] udevd[113]: starting version 175
    [    2.929202] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
    [    2.929205] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [    2.929243] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    2.929252] e1000e 0000:00:19.0: setting latency timer to 64
    [    2.929356] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [    2.931976] generic-usb 0003:058F:6363.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.7-3/input1
    [    2.934159] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.934168] firewire_ohci 0000:02:00.0: setting latency timer to 64
    [    2.947556] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
    [    2.947688] generic-usb 0003:046D:C51B.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-1/input0
    [    2.961151] generic-usb 0003:046D:C51B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input1
    [    2.961171] usbcore: registered new interface driver usbhid
    [    2.961173] usbhid: USB HID core driver
    [    2.996049] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
    [    3.120316] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:f4:ca:94
    [    3.120320] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [    3.120343] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
    [    3.496105] firewire_core: created device fw0: GUID 001d72ffae924fff, S400
    [    3.628091] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [   13.558354] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   13.574468] udevd[345]: starting version 175
    [   13.612205] lp: driver loaded but no devices found
    [   13.613255] [drm] Initialized drm 1.1.0 20060810
    [   13.627489] Adding 9068540k swap on /dev/sda5.  Priority:-1 extents:1 across:9068540k 
    [   13.645401] wmi: Mapper loaded
    [   13.647362] [drm] radeon defaulting to kernel modesetting.
    [   13.647365] [drm] radeon kernel modesetting enabled.
    [   13.648293] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   13.648299] radeon 0000:01:00.0: setting latency timer to 64
    [   13.666981] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x174B:0xE990).
    [   13.667009] [drm] register mmio base: 0xFEAF0000
    [   13.667011] [drm] register mmio size: 65536
    [   13.667131] ATOM BIOS: 11X
    [   13.667162] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [   13.667165] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [   13.669611] [drm] Detected VRAM RAM=512M, BAR=256M
    [   13.669614] [drm] RAM width 64bits DDR
    [   13.670153] [TTM] Zone  kernel: Available graphics memory: 408100 kiB.
    [   13.670156] [TTM] Zone highmem: Available graphics memory: 3096904 kiB.
    [   13.670157] [TTM] Initializing pool allocator.
    [   13.670180] [drm] radeon: 512M of VRAM memory ready
    [   13.670182] [drm] radeon: 512M of GTT memory ready.
    [   13.670197] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   13.670199] [drm] Driver supports precise vblank timestamp query.
    [   13.670261] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [   13.670267] radeon 0000:01:00.0: radeon: using MSI.
    [   13.670299] [drm] radeon: irq initialized.
    [   13.670303] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [   13.671330] [drm] Loading RV710 Microcode
    [   13.671791] type=1400 audit(1349801902.193:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=497 comm="apparmor_parser"
    [   13.672385] type=1400 audit(1349801902.197:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=497 comm="apparmor_parser"
    [   13.672625] type=1400 audit(1349801902.197:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=497 comm="apparmor_parser"
    [   13.697069] cfg80211: Calling CRDA to update world regulatory domain
    [   13.720298] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   13.720347] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [   13.720372] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [   13.823592] cfg80211: World regulatory domain updated:
    [   13.823595] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   13.823598] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.823601] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.823603] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.823605] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.823608] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.824118] usb 1-4: reset high-speed USB device number 2 using ehci_hcd
    [   13.856981] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [   13.857032] radeon 0000:01:00.0: WB enabled
    [   13.903019] [drm] ring test succeeded in 1 usecs
    [   13.903179] [drm] radeon: ib pool ready.
    [   13.903252] [drm] ib test succeeded in 0 usecs
    [   13.903551] [drm] Radeon Display Connectors
    [   13.903553] [drm] Connector 0:
    [   13.903554] [drm]   VGA
    [   13.903556] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [   13.903558] [drm]   Encoders:
    [   13.903559] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
    [   13.903561] [drm] Connector 1:
    [   13.903562] [drm]   HDMI-A
    [   13.903563] [drm]   HPD1
    [   13.903565] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [   13.903567] [drm]   Encoders:
    [   13.903568] [drm]     DFP1: INTERNAL_UNIPHY
    [   13.903570] [drm] Connector 2:
    [   13.903571] [drm]   DVI-I
    [   13.903572] [drm]   HPD4
    [   13.903574] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
    [   13.903576] [drm]   Encoders:
    [   13.903577] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
    [   13.903579] [drm]     DFP2: INTERNAL_UNIPHY2
    [   13.903596] [drm] Internal thermal controller with fan control
    [   13.903639] [drm] radeon: power management initialized
    [   13.977654] [drm] fb mappable at 0xD0142000
    [   13.977657] [drm] vram apper at 0xD0000000
    [   13.977658] [drm] size 5242880
    [   13.977660] [drm] fb depth is 24
    [   13.977661] [drm]    pitch is 5120
    [   13.977744] fbcon: radeondrmfb (fb0) is primary device
    [   13.977857] Console: switching to colour frame buffer device 160x64
    [   13.977888] fb0: radeondrmfb frame buffer device
    [   13.977890] drm: registered panic notifier
    [   13.977896] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
    [   13.995600] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995604] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995606] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995609] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995611] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995614] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995616] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995618] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995620] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995623] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995625] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995628] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995630] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995634] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995637] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995639] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995642] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995644] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995647] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995649] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995651] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995654] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995656] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.995658] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995661] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.995663] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995665] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.997016] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
    [   13.998735] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   13.999370] Registered led device: rt2800usb-phy0::radio
    [   13.999406] Registered led device: rt2800usb-phy0::assoc
    [   13.999434] Registered led device: rt2800usb-phy0::quality
    [   13.999480] usbcore: registered new interface driver rt2800usb
    [   14.345257] init: failsafe main process (782) killed by TERM signal
    [   14.381923] Bluetooth: Core ver 2.16
    [   14.381948] NET: Registered protocol family 31
    [   14.381949] Bluetooth: HCI device and connection manager initialized
    [   14.381952] Bluetooth: HCI socket layer initialized
    [   14.381954] Bluetooth: L2CAP socket layer initialized
    [   14.381960] Bluetooth: SCO socket layer initialized
    [   14.383907] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   14.383910] Bluetooth: BNEP filters: protocol multicast
    [   14.389033] Bluetooth: RFCOMM TTY layer initialized
    [   14.389039] Bluetooth: RFCOMM socket layer initialized
    [   14.389041] Bluetooth: RFCOMM ver 1.11
    [   14.405181] ppdev: user-space parallel port driver
    [   14.417647] type=1400 audit(1349801902.941:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=854 comm="apparmor_parser"
    [   14.418166] type=1400 audit(1349801902.941:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=854 comm="apparmor_parser"
    [   14.556943] type=1400 audit(1349801903.081:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=890 comm="apparmor_parser"
    [   14.557297] type=1400 audit(1349801903.081:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=891 comm="apparmor_parser"
    [   14.557754] type=1400 audit(1349801903.081:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=891 comm="apparmor_parser"
    [   14.558000] type=1400 audit(1349801903.081:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=891 comm="apparmor_parser"
    [   14.559005] type=1400 audit(1349801903.081:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=894 comm="apparmor_parser"
    [   14.624209] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   14.647625] init: alsa-restore main process (933) terminated with status 19
    [   14.680114] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   14.680352] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.680699] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.896351] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   14.896833] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   16.772015] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
    [   17.780029] hda-intel: No response from codec, disabling MSI: last cmd=0x300f0000
    [   18.176283] wlan0: authenticate with 00:1a:2b:13:ba:89 (try 1)
    [   18.177794] wlan0: authenticated
    [   18.232283] wlan0: associate with 00:1a:2b:13:ba:89 (try 1)
    [   18.234046] wlan0: RX AssocResp from 00:1a:2b:13:ba:89 (capab=0x411 status=0 aid=1)
    [   18.234050] wlan0: associated
    [   18.243835] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   18.784013] hda-intel: Codec #3 probe error; disabling it...
    [   18.827233] hda_codec: ALC888: BIOS auto-probing.
    [   18.835472] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
    [   18.835634] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [   18.835708] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [   18.835779] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [   18.835849] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [   18.835918] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [   18.835989] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [   18.836380] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [   18.836448] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
    [   18.836472] snd_hda_intel 0000:01:00.1: setting latency timer to 64
    [   18.854374] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
    [   18.854514] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [   18.984643] init: plymouth-stop pre-start process (1556) terminated with status 1
    [   29.008005] wlan0: no IPv6 routers present

  4. #4
    Join Date
    Apr 2008
    Location
    Australian in Germany
    Beans
    4,010
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: Ubuntu crashes: "Could not write byte: broken pipe"

    I wont try to improve on NikTh's advice because I can't

    Regarding having to shut off the computer when it freezes up, though. Have a look at this

    http://en.wikipedia.org/wiki/Reisub#Uses

    What is described there is a safe way to restart a frozen computer.

    edit: That page shows how to use alt+sysrq+reisub to reboot. On that page above the point I linked to there is a table showing the various functions. Because I have been wondering about it myself, I tried an o on the end (letter o, not zero) instead of the b based on the listing in the table and found that it does indeed shut down the system without rebooting.
    Last edited by audiomick; October 9th, 2012 at 07:32 PM.
    Michael

  5. #5
    Join Date
    Feb 2012
    Location
    el_GR
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: Ubuntu crashes: "Could not write byte: broken pipe"

    Quote Originally Posted by vallvi View Post
    thanks, Nikth, for your offer to help. The result is pasted below. (but today I didn't have any problem with my computer crashing.
    dmesg is usable and helpful , when the crashing take a place.

    Now I cannot see any weird messages or errors in dmesg you posted.

    Maybe we must look in older logs

    Code:
    sudo cat /var/log/dmesg.0 > dmesg0.txt
    gedit dmesg0.txt
    OR
    Code:
    sudo zcat /var/log/dmesg.1.gz > dmesg1.txt
    gedit dmesg1.txt
    Another log might help is Xorg log
    Code:
    sudo cat /var/log/Xorg.0.log.old > xorg.txt
    gedit xorg.txt
    Hopefully the error was temporary and will not repeated , but if you want to examine that better , give the results.

    Thanks
    # How to mark the Thread as [SOLVED] when done.
    # Ubuntu Greek Community
    # Gain 20GB of space on copy.com when sign up with my referral link.

  6. #6
    Join Date
    May 2009
    Beans
    63

    Re: Ubuntu crashes: "Could not write byte: broken pipe"

    ok nickth, here you go. Any feedback welcome:

    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.2.0-31-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50-Ubuntu SMP Fri Sep 7 16:39:45 UTC 2012 (Ubuntu 3.2.0-31.50-generic-pae 3.2.28)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
    [    0.000000]  BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01100 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed02000 - 00000000fed14c00 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI present.
    [    0.000000] DMI: Acer Aspire X3810/WG43M, BIOS P01-A3 05/26/2009
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x1000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-DFFFF uncachable
    [    0.000000]   E0000-EFFFF write-through
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 1C0000000 mask FC0000000 uncachable
    [    0.000000]   1 base 000000000 mask E00000000 write-back
    [    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] original variable MTRRs
    [    0.000000] reg 0, base: 7GB, range: 1GB, type UC
    [    0.000000] reg 1, base: 0GB, range: 8GB, type WB
    [    0.000000] reg 2, base: 3GB, range: 1GB, type UC
    [    0.000000] total RAM covered: 6144M
    [    0.000000] Found optimal setting for mtrr clean up
    [    0.000000]  gran_size: 64K     chunk_size: 64K     num_reg: 4      lose cover RAM: 0G
    [    0.000000] New variable MTRRs
    [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
    [    0.000000] reg 2, base: 4GB, range: 2GB, type WB
    [    0.000000] reg 3, base: 6GB, range: 1GB, type WB
    [    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] found SMP MP-table at [c00ff780] ff780
    [    0.000000] initial memory mapped : 0 - 02000000
    [    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
    [    0.000000]  0000000000 - 0000200000 page 4k
    [    0.000000]  0000200000 - 0037a00000 page 2M
    [    0.000000]  0037a00000 - 0037bfe000 page 4k
    [    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
    [    0.000000] RAMDISK: 364ee000 - 3726f000
    [    0.000000] ACPI: RSDP 000fa770 00024 (v02 ACPIAM)
    [    0.000000] ACPI: XSDT bff90100 0006C (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: FACP bff90290 000F4 (v04 052609 FACP2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: DSDT bff905c0 061D5 (v02   P01-   P01-A3 000000A3 INTL 20051117)
    [    0.000000] ACPI: FACS bff9e000 00040
    [    0.000000] ACPI: APIC bff90390 0006C (v02 052609 APIC2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: MCFG bff90400 0003C (v01 052609 OEMMCFG  20090526 MSFT 00000097)
    [    0.000000] ACPI: SLIC bff90440 00176 (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: OEMB bff9e040 00072 (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: HPET bff9a5c0 00038 (v01 052609 OEMHPET  20090526 MSFT 00000097)
    [    0.000000] ACPI: GSCI bff9e0c0 02024 (v01 052609 GMCHSCI  20090526 MSFT 00000097)
    [    0.000000] ACPI: AWMI bffa00f0 0004E (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: SSDT bffa0940 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 6276MB HIGHMEM available.
    [    0.000000] 891MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 37bfe000
    [    0.000000]   low ram: 0 - 37bfe000
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x00037bfe
    [    0.000000]   HighMem  0x00037bfe -> 0x001c0000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009e
    [    0.000000]     0: 0x00000100 -> 0x000bff90
    [    0.000000]     0: 0x00100000 -> 0x001c0000
    [    0.000000] On node 0 totalpages: 1572638
    [    0.000000] free_area_init_node: node 0, pgdat c1868a80, node_mem_map f2cee200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3950 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1752 pages used for memmap
    [    0.000000]   Normal zone: 222502 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 12553 pages used for memmap
    [    0.000000]   HighMem zone: 1331849 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34240 r0 d23104 u57344
    [    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1558301
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic-pae root=UUID=3169b696-02b9-4593-b5f7-30c72e816dc7 ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 29359872 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00037bfe:001c0000)
    [    0.000000] Memory: 6179240k/7340032k available (5818k kernel code, 111312k reserved, 2846k data, 740k init, 5377608k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    [    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    [    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
    [    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
    [    0.000000]       .data : 0xc15ae8bc - 0xc1876280   (2846 kB)
    [    0.000000]       .text : 0xc1000000 - 0xc15ae8bc   (5818 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:2304 nr_irqs:712 16
    [    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2327.716 MHz processor.
    [    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.43 BogoMIPS (lpj=9310864)
    [    0.004006] pid_max: default: 32768 minimum: 301
    [    0.004026] Security Framework initialized
    [    0.004041] AppArmor: AppArmor initialized
    [    0.004043] Yama: becoming mindful.
    [    0.004093] Mount-cache hash table entries: 512
    [    0.004216] Initializing cgroup subsys cpuacct
    [    0.004222] Initializing cgroup subsys memory
    [    0.004230] Initializing cgroup subsys devices
    [    0.004232] Initializing cgroup subsys freezer
    [    0.004234] Initializing cgroup subsys blkio
    [    0.004240] Initializing cgroup subsys perf_event
    [    0.004264] CPU: Physical Processor ID: 0
    [    0.004266] CPU: Processor Core ID: 0
    [    0.004269] mce: CPU supports 6 MCE banks
    [    0.004276] CPU0: Thermal monitoring enabled (TM2)
    [    0.004279] using mwait in idle threads.
    [    0.009713] ACPI: Core revision 20110623
    [    0.016011] ftrace: allocating 26555 entries in 52 pages
    [    0.024042] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.024386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.066495] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
    [    0.068003] APIC calibration not consistent with PM-Timer: 135ms instead of 100ms
    [    0.068003] APIC delta adjusted to PM-Timer: 2078344 (2826523)
    [    0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [    0.068003] ... version:                2
    [    0.068003] ... bit width:              40
    [    0.068003] ... generic registers:      2
    [    0.068003] ... value mask:             000000ffffffffff
    [    0.068003] ... max period:             000000007fffffff
    [    0.068003] ... fixed-purpose events:   3
    [    0.068003] ... event mask:             0000000700000003
    [    0.068003] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.068003] CPU 1 irqstacks, hard=f7512000 soft=f7514000
    [    0.068003] Booting Node   0, Processors  #1
    [    0.068003] smpboot cpu 1: start_ip = 9a000
    [    0.008000] Initializing CPU#1
    [    0.156033] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.156124] CPU 2 irqstacks, hard=f7520000 soft=f7522000
    [    0.156126]  #2
    [    0.156127] smpboot cpu 2: start_ip = 9a000
    [    0.008000] Initializing CPU#2
    [    0.248031] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.248116] CPU 3 irqstacks, hard=f752e000 soft=f7538000
    [    0.248118]  #3 Ok.
    [    0.248120] smpboot cpu 3: start_ip = 9a000
    [    0.008000] Initializing CPU#3
    [    0.340037] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.340061] Brought up 4 CPUs
    [    0.340064] Total of 4 processors activated (18621.95 BogoMIPS).
    [    0.343009] devtmpfs: initialized
    [    0.343009] EVM: security.selinux
    [    0.343009] EVM: security.SMACK64
    [    0.343009] EVM: security.capability
    [    0.343009] PM: Registering ACPI NVS region at bff9e000 (270336 bytes)
    [    0.344579] print_constraints: dummy: 
    [    0.344606] RTC time: 19:58:39, date: 10/08/12
    [    0.344644] NET: Registered protocol family 16
    [    0.344652] Trying to unpack rootfs image as initramfs...
    [    0.344773] EISA bus registered
    [    0.344801] ACPI: bus type pci registered
    [    0.344863] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.344866] PCI: not using MMCONFIG
    [    0.344943] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
    [    0.345003] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    [    0.345004] PCI: Using configuration type 1 for base access
    [    0.346089] bio: create slab <bio-0> at 0
    [    0.346089] ACPI: Added _OSI(Module Device)
    [    0.346089] ACPI: Added _OSI(Processor Device)
    [    0.346089] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.346089] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.346089] ACPI: EC: Look up EC in DSDT
    [    0.348965] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.351656] ACPI: SSDT bffa0140 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.351966] ACPI: Dynamic OEM Table Load:
    [    0.351969] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.352264] ACPI: SSDT bffa0340 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.352574] ACPI: Dynamic OEM Table Load:
    [    0.352577] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.352853] ACPI: SSDT bffa0540 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.353164] ACPI: Dynamic OEM Table Load:
    [    0.353167] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.353436] ACPI: SSDT bffa0740 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.353749] ACPI: Dynamic OEM Table Load:
    [    0.353752] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.353939] ACPI: Interpreter enabled
    [    0.353944] ACPI: (supports S0 S3 S4 S5)
    [    0.353964] ACPI: Using IOAPIC for interrupt routing
    [    0.353989] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.355181] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [    0.355183] PCI: Using MMCONFIG for extended config space
    [    0.360664] ACPI: No dock devices found.
    [    0.360667] HEST: Table not found.
    [    0.360671] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.360756] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.360933] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
    [    0.360936] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
    [    0.360938] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.360941] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [    0.360943] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [    0.360946] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
    [    0.360959] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [    0.361000] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [    0.361040] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [    0.361043] pci 0000:00:01.0: PME# disabled
    [    0.361081] pci 0000:00:19.0: [8086:10ce] type 0 class 0x000200
    [    0.361098] pci 0000:00:19.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
    [    0.361106] pci 0000:00:19.0: reg 14: [mem 0xfe9de000-0xfe9defff]
    [    0.361115] pci 0000:00:19.0: reg 18: [io  0xcc00-0xcc1f]
    [    0.361174] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [    0.361177] pci 0000:00:19.0: PME# disabled
    [    0.361195] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [    0.361234] pci 0000:00:1a.0: reg 20: [io  0xc880-0xc89f]
    [    0.361283] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [    0.361324] pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
    [    0.361372] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [    0.361411] pci 0000:00:1a.2: reg 20: [io  0xc480-0xc49f]
    [    0.361468] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [    0.361488] pci 0000:00:1a.7: reg 10: [mem 0xfe9dc000-0xfe9dc3ff]
    [    0.361573] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [    0.361578] pci 0000:00:1a.7: PME# disabled
    [    0.361600] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [    0.361614] pci 0000:00:1b.0: reg 10: [mem 0xfe9d8000-0xfe9dbfff 64bit]
    [    0.361677] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.361681] pci 0000:00:1b.0: PME# disabled
    [    0.361699] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [    0.361764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.361768] pci 0000:00:1c.0: PME# disabled
    [    0.361794] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [    0.361834] pci 0000:00:1d.0: reg 20: [io  0xc400-0xc41f]
    [    0.361885] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [    0.361924] pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
    [    0.361972] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [    0.362012] pci 0000:00:1d.2: reg 20: [io  0xc000-0xc01f]
    [    0.362068] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [    0.362088] pci 0000:00:1d.7: reg 10: [mem 0xfe9d6000-0xfe9d63ff]
    [    0.362174] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.362178] pci 0000:00:1d.7: PME# disabled
    [    0.362198] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [    0.362257] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
    [    0.362369] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
    [    0.362386] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
    [    0.362394] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
    [    0.362401] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
    [    0.362409] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
    [    0.362417] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb41f]
    [    0.362425] pci 0000:00:1f.2: reg 24: [mem 0xfe9d4000-0xfe9d47ff]
    [    0.362469] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.362473] pci 0000:00:1f.2: PME# disabled
    [    0.362488] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [    0.362502] pci 0000:00:1f.3: reg 10: [mem 0xfe9d3c00-0xfe9d3cff 64bit]
    [    0.362522] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
    [    0.362579] pci 0000:01:00.0: [1002:954f] type 0 class 0x000300
    [    0.362592] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.362602] pci 0000:01:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff 64bit]
    [    0.362610] pci 0000:01:00.0: reg 20: [io  0xd000-0xd0ff]
    [    0.362623] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
    [    0.362653] pci 0000:01:00.0: supports D1 D2
    [    0.362672] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
    [    0.362685] pci 0000:01:00.1: reg 10: [mem 0xfeaec000-0xfeaeffff 64bit]
    [    0.362745] pci 0000:01:00.1: supports D1 D2
    [    0.362774] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.362777] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.362780] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.362785] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.362840] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
    [    0.362862] pci 0000:02:00.0: reg 10: [mem 0xfebff800-0xfebfffff 64bit]
    [    0.362874] pci 0000:02:00.0: reg 18: [io  0xe800-0xe8ff]
    [    0.362966] pci 0000:02:00.0: supports D2
    [    0.362968] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
    [    0.362973] pci 0000:02:00.0: PME# disabled
    [    0.368041] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.368045] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.368049] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.368112] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [    0.368122] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.368124] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.368127] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.368129] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [    0.368132] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [    0.368134] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
    [    0.368157] pci_bus 0000:00: on NUMA node 0
    [    0.368161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.368374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [    0.368424]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.368427]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.368429] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.377219] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
    [    0.377268] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
    [    0.377311] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
    [    0.377357] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
    [    0.377404] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15)
    [    0.377450] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
    [    0.377496] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
    [    0.377542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
    [    0.377655] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.377655] vgaarb: loaded
    [    0.377655] vgaarb: bridge control possible 0000:01:00.0
    [    0.377655] i2c-core: driver [aat2870] using legacy suspend method
    [    0.377655] i2c-core: driver [aat2870] using legacy resume method
    [    0.377655] SCSI subsystem initialized
    [    0.377655] libata version 3.00 loaded.
    [    0.377655] usbcore: registered new interface driver usbfs
    [    0.377655] usbcore: registered new interface driver hub
    [    0.377655] usbcore: registered new device driver usb
    [    0.377655] PCI: Using ACPI for IRQ routing
    [    0.377655] PCI: pci_cache_line_size set to 64 bytes
    [    0.377655] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
    [    0.377655] reserve RAM buffer: 00000000bff90000 - 00000000bfffffff 
    [    0.377655] NetLabel: Initializing
    [    0.377655] NetLabel:  domain hash size = 128
    [    0.377655] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.377655] NetLabel:  unlabeled traffic allowed by default
    [    0.377655] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [    0.377655] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [    0.377655] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [    0.392157] Switching to clocksource hpet
    [    0.400291] AppArmor: AppArmor Filesystem Enabled
    [    0.400321] pnp: PnP ACPI init
    [    0.400338] ACPI: bus type pnp registered
    [    0.400454] pnp 00:00: [bus 00-ff]
    [    0.400457] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.400459] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.400461] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.400464] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.400466] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [    0.400468] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [    0.400470] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
    [    0.400527] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.400537] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [    0.400539] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [    0.400594] system 00:01: [mem 0xfed14000-0xfed19fff] could not be reserved
    [    0.400597] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [    0.400600] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.400635] pnp 00:02: [dma 4]
    [    0.400638] pnp 00:02: [io  0x0000-0x000f]
    [    0.400640] pnp 00:02: [io  0x0081-0x0083]
    [    0.400642] pnp 00:02: [io  0x0087]
    [    0.400643] pnp 00:02: [io  0x0089-0x008b]
    [    0.400645] pnp 00:02: [io  0x008f]
    [    0.400647] pnp 00:02: [io  0x00c0-0x00df]
    [    0.400674] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.400685] pnp 00:03: [io  0x0070-0x0071]
    [    0.400696] pnp 00:03: [irq 8]
    [    0.400725] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.400754] pnp 00:04: [io  0x0060]
    [    0.400756] pnp 00:04: [io  0x0064]
    [    0.400761] pnp 00:04: [irq 1]
    [    0.400789] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.400833] pnp 00:05: [irq 12]
    [    0.400862] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [    0.400872] pnp 00:06: [io  0x0061]
    [    0.400901] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.400910] pnp 00:07: [io  0x00f0-0x00ff]
    [    0.400915] pnp 00:07: [irq 13]
    [    0.400943] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.401339] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
    [    0.401341] pnp 00:08: [io  0x0a00-0x0a0f]
    [    0.401344] pnp 00:08: [io  0x0a10-0x0a1f]
    [    0.401348] pnp 00:08: [io  0x0a20-0x0a2f]
    [    0.401350] pnp 00:08: [io  0x0a30-0x0a3f]
    [    0.401401] system 00:08: [io  0x0a00-0x0a0f] has been reserved
    [    0.401403] system 00:08: [io  0x0a10-0x0a1f] has been reserved
    [    0.401406] system 00:08: [io  0x0a20-0x0a2f] has been reserved
    [    0.401408] system 00:08: [io  0x0a30-0x0a3f] has been reserved
    [    0.401412] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401521] pnp 00:09: [io  0x0010-0x001f]
    [    0.401523] pnp 00:09: [io  0x0022-0x003f]
    [    0.401525] pnp 00:09: [io  0x0044-0x005f]
    [    0.401527] pnp 00:09: [io  0x0062-0x0063]
    [    0.401529] pnp 00:09: [io  0x0065-0x006f]
    [    0.401531] pnp 00:09: [io  0x0072-0x007f]
    [    0.401533] pnp 00:09: [io  0x0080]
    [    0.401535] pnp 00:09: [io  0x0084-0x0086]
    [    0.401536] pnp 00:09: [io  0x0088]
    [    0.401538] pnp 00:09: [io  0x008c-0x008e]
    [    0.401540] pnp 00:09: [io  0x0090-0x009f]
    [    0.401542] pnp 00:09: [io  0x00a2-0x00bf]
    [    0.401544] pnp 00:09: [io  0x00e0-0x00ef]
    [    0.401546] pnp 00:09: [io  0x04d0-0x04d1]
    [    0.401548] pnp 00:09: [io  0x0800-0x087f]
    [    0.401551] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
    [    0.401553] pnp 00:09: [io  0x0500-0x057f]
    [    0.401555] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [    0.401557] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [    0.401559] pnp 00:09: [mem 0xfed40000-0xfed8ffff]
    [    0.401619] system 00:09: [io  0x04d0-0x04d1] has been reserved
    [    0.401622] system 00:09: [io  0x0800-0x087f] has been reserved
    [    0.401625] system 00:09: [io  0x0500-0x057f] has been reserved
    [    0.401628] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.401631] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.401633] system 00:09: [mem 0xfed40000-0xfed8ffff] has been reserved
    [    0.401637] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401691] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
    [    0.401721] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.401770] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
    [    0.401772] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [    0.401805] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.401845] pnp 00:0c: [mem 0xffc00000-0xffefffff]
    [    0.401894] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
    [    0.401897] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401975] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
    [    0.401977] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
    [    0.402027] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.402030] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.402034] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.402078] pnp 00:0e: [mem 0xe0000000-0xefffffff]
    [    0.402125] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.402128] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.402303] pnp 00:0f: [mem 0x00000000-0x0009ffff]
    [    0.402305] pnp 00:0f: [mem 0x000c0000-0x000cffff]
    [    0.402307] pnp 00:0f: [mem 0x000e0000-0x000fffff]
    [    0.402309] pnp 00:0f: [mem 0x00100000-0xbfffffff]
    [    0.402311] pnp 00:0f: [mem 0xfed90000-0xffffffff]
    [    0.402372] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.402375] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
    [    0.402377] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.402380] system 00:0f: [mem 0x00100000-0xbfffffff] could not be reserved
    [    0.402383] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
    [    0.402386] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.402515] pnp: PnP ACPI: found 16 devices
    [    0.402517] ACPI: ACPI bus type pnp unregistered
    [    0.402520] PnPBIOS: Disabled by ACPI PNP
    [    0.440575] PCI: max bus depth: 1 pci_try_num: 2
    [    0.440607] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440610] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.440613] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.440617] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.440620] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.440625] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.440627] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.440632] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.440636] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440642] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [    0.440670] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.440674] pci 0000:00:01.0: setting latency timer to 64
    [    0.440684] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.440688] pci 0000:00:1c.0: setting latency timer to 64
    [    0.440694] pci 0000:00:1e.0: setting latency timer to 64
    [    0.440698] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.440700] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.440703] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.440705] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.440708] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.440710] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.440713] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
    [    0.440715] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [    0.440717] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.440720] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
    [    0.440722] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [    0.440725] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440727] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
    [    0.440729] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
    [    0.440732] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.440734] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.440736] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.440739] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.440779] NET: Registered protocol family 2
    [    0.440852] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.441066] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.441404] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.441586] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.441587] TCP reno registered
    [    0.441590] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.441599] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.441677] NET: Registered protocol family 1
    [    0.441706] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.441722] pci 0000:00:1a.0: PCI INT A disabled
    [    0.441736] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.441751] pci 0000:00:1a.1: PCI INT B disabled
    [    0.441761] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.441776] pci 0000:00:1a.2: PCI INT D disabled
    [    0.441787] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.441816] pci 0000:00:1a.7: PCI INT C disabled
    [    0.441831] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.441846] pci 0000:00:1d.0: PCI INT A disabled
    [    0.441853] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.441867] pci 0000:00:1d.1: PCI INT B disabled
    [    0.441875] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.441890] pci 0000:00:1d.2: PCI INT C disabled
    [    0.441898] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.441912] pci 0000:00:1d.7: PCI INT A disabled
    [    0.441925] pci 0000:01:00.0: Boot video device
    [    0.441933] PCI: CLS 32 bytes, default 64
    [    0.442413] audit: initializing netlink socket (disabled)
    [    0.442423] type=2000 audit(1349726318.436:1): initialized
    [    0.463422] highmem bounce pool size: 64 pages
    [    0.463427] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.466064] VFS: Disk quotas dquot_6.5.2
    [    0.466127] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.466713] fuse init (API version 7.17)
    [    0.466824] msgmni has been set to 1565
    [    0.467376] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.467416] io scheduler noop registered
    [    0.467423] io scheduler deadline registered
    [    0.467433] io scheduler cfq registered (default)
    [    0.467544] pcieport 0000:00:01.0: setting latency timer to 64
    [    0.467573] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [    0.467620] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.467654] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [    0.467732] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.467757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.467818] intel_idle: MWAIT substates: 0x20
    [    0.467819] intel_idle: does not run on family 6 model 23
    [    0.467902] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.467907] ACPI: Power Button [PWRB]
    [    0.467952] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.467955] ACPI: Power Button [PWRF]
    [    0.470626] ERST: Table is not found!
    [    0.470629] GHES: HEST is not enabled!
    [    0.470729] isapnp: Scanning for PnP cards...
    [    0.470761] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    0.630506] Freeing initrd memory: 13828k freed
    [    0.823593] isapnp: No Plug & Play device found
    [    0.876587] Linux agpgart interface v0.103
    [    0.878712] brd: module loaded
    [    0.879736] loop: module loaded
    [    0.879874] ahci 0000:00:1f.2: version 3.0
    [    0.879886] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.879924] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [    0.879971] ahci: SSS flag set, parallel bus scan disabled
    [    0.880012] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [    0.880016] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
    [    0.880020] ahci 0000:00:1f.2: setting latency timer to 64
    [    0.920617] scsi0 : ahci
    [    0.920738] scsi1 : ahci
    [    0.920842] scsi2 : ahci
    [    0.920943] scsi3 : ahci
    [    0.921047] scsi4 : ahci
    [    0.921154] scsi5 : ahci
    [    0.921321] ata1: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4100 irq 42
    [    0.921324] ata2: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4180 irq 42
    [    0.921327] ata3: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4200 irq 42
    [    0.921329] ata4: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4280 irq 42
    [    0.921332] ata5: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4300 irq 42
    [    0.921334] ata6: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4380 irq 42
    [    0.921759] Fixed MDIO Bus: probed
    [    0.921779] tun: Universal TUN/TAP device driver, 1.6
    [    0.921781] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.921858] PPP generic driver version 2.4.2
    [    0.922016] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.922032] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.922046] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    0.922049] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    0.922118] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    0.922141] ehci_hcd 0000:00:1a.7: debug port 1
    [    0.926026] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [    0.926040] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9dc000
    [    0.940014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [    0.940179] hub 1-0:1.0: USB hub found
    [    0.940183] hub 1-0:1.0: 6 ports detected
    [    0.940260] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.940270] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.940273] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.940338] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    0.940359] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.944248] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    0.944261] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9d6000
    [    0.960014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.960155] hub 2-0:1.0: USB hub found
    [    0.960159] hub 2-0:1.0: 6 ports detected
    [    0.960232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.960246] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.960261] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.960267] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [    0.960270] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    0.960335] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    0.960364] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
    [    0.960511] hub 3-0:1.0: USB hub found
    [    0.960515] hub 3-0:1.0: 2 ports detected
    [    0.960578] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.960585] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    0.960588] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    0.960662] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    0.960693] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
    [    0.960838] hub 4-0:1.0: USB hub found
    [    0.960842] hub 4-0:1.0: 2 ports detected
    [    0.960910] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.960917] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [    0.960920] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [    0.960985] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [    0.961014] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
    [    0.961160] hub 5-0:1.0: USB hub found
    [    0.961164] hub 5-0:1.0: 2 ports detected
    [    0.961224] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.961230] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.961233] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.961300] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [    0.961321] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
    [    0.961468] hub 6-0:1.0: USB hub found
    [    0.961471] hub 6-0:1.0: 2 ports detected
    [    0.961534] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.961541] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.961544] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.961611] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [    0.961632] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
    [    0.961778] hub 7-0:1.0: USB hub found
    [    0.961781] hub 7-0:1.0: 2 ports detected
    [    0.961845] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.961851] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.961854] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.961922] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [    0.961942] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
    [    0.962089] hub 8-0:1.0: USB hub found
    [    0.962093] hub 8-0:1.0: 2 ports detected
    [    0.962207] usbcore: registered new interface driver libusual
    [    0.962266] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [    0.962624] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.962631] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.962793] mousedev: PS/2 mouse device common for all mice
    [    0.963008] rtc_cmos 00:03: RTC can wake from S4
    [    0.963130] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    0.963152] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    0.963210] device-mapper: uevent: version 1.0.3
    [    0.963306] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    [    0.963338] EISA: Probing bus 0 at eisa.0
    [    0.963340] EISA: Cannot allocate resource for mainboard
    [    0.963342] Cannot allocate resource for EISA slot 1
    [    0.963344] Cannot allocate resource for EISA slot 2
    [    0.963345] Cannot allocate resource for EISA slot 3
    [    0.963347] Cannot allocate resource for EISA slot 4
    [    0.963349] Cannot allocate resource for EISA slot 5
    [    0.963350] Cannot allocate resource for EISA slot 6
    [    0.963352] Cannot allocate resource for EISA slot 7
    [    0.963354] Cannot allocate resource for EISA slot 8
    [    0.963355] EISA: Detected 0 cards.
    [    0.963364] cpufreq-nforce2: No nForce2 chipset.
    [    0.963366] cpuidle: using governor ladder
    [    0.963368] cpuidle: using governor menu
    [    0.963370] EFI Variables Facility v0.08 2004-May-17
    [    0.963634] TCP cubic registered
    [    0.963760] NET: Registered protocol family 10
    [    0.964329] NET: Registered protocol family 17
    [    0.964333] Registering the dns_resolver key type
    [    0.964352] Using IPI No-Shortcut mode
    [    0.964518] PM: Hibernation image not present or could not be loaded.
    [    0.964530] registered taskstats version 1
    [    0.971489]   Magic number: 0:85:1001
    [    0.971530] rtc_cmos 00:03: hash matches
    [    0.971591] rtc_cmos 00:03: setting system clock to 2012-10-08 19:58:40 UTC (1349726320)
    [    0.972652] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.972654] EDD information not available.
    [    0.978873] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.240019] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.243031] ata1.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
    [    1.246902] ata1.00: configured for UDMA/100
    [    1.252015] usb 1-4: new high-speed USB device number 2 using ehci_hcd
    [    1.257621] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH40F     MG01 PQ: 0 ANSI: 5
    [    1.266065] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.266068] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.266216] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    1.266318] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    1.440015] Refined TSC clocksource calibration: 2327.754 MHz.
    [    1.440020] Switching to clocksource tsc
    [    1.568012] usb 2-3: new high-speed USB device number 2 using ehci_hcd
    [    1.584014] ata2: SATA link down (SStatus 0 SControl 300)
    [    1.704274] Initializing USB Mass Storage driver...
    [    1.704419] scsi6 : usb-storage 2-3:1.0
    [    1.704490] usbcore: registered new interface driver usb-storage
    [    1.704492] USB Mass Storage support registered.
    [    1.904014] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.940013] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [    2.224015] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    2.239178] ata4.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
    [    2.239182] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [    2.240198] ata4.00: configured for UDMA/133
    [    2.240300] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
    [    2.240470] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    2.240477] sd 3:0:0:0: Attached scsi generic sg1 type 0
    [    2.240577] sd 3:0:0:0: [sda] Write Protect is off
    [    2.240585] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.240614] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.283075]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    2.283493] sd 3:0:0:0: [sda] Attached SCSI disk
    [    2.560014] ata5: SATA link down (SStatus 0 SControl 300)
    [    2.704859] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
    [    2.705460] scsi 6:0:0:1: Direct-Access     Multiple Flash Reader     1.05 PQ: 0 ANSI: 0
    [    2.706027] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [    2.706174] sd 6:0:0:1: Attached scsi generic sg3 type 0
    [    2.709572] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [    2.710334] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [    2.880021] ata6: SATA link down (SStatus 0 SControl 300)
    [    2.880105] Freeing unused kernel memory: 740k freed
    [    2.880354] Write protecting the kernel text: 5820k
    [    2.880383] Write protecting the kernel read-only data: 2376k
    [    2.880385] NX-protecting the kernel data: 4420k
    [    2.897298] udevd[113]: starting version 175
    [    2.931119] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
    [    2.931122] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [    2.931163] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    2.931173] e1000e 0000:00:19.0: setting latency timer to 64
    [    2.931276] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [    2.934203] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.934213] firewire_ohci 0000:02:00.0: setting latency timer to 64
    [    2.935210] generic-usb 0003:058F:6363.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.7-3/input1
    [    2.950624] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
    [    2.950911] generic-usb 0003:046D:C51B.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-1/input0
    [    2.964167] generic-usb 0003:046D:C51B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input1
    [    2.964187] usbcore: registered new interface driver usbhid
    [    2.964188] usbhid: USB HID core driver
    [    2.996053] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
    [    3.118453] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:f4:ca:94
    [    3.118457] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [    3.118477] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
    [    3.336992] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
    [    3.336995] EXT4-fs (sda6): write access will be enabled during recovery
    [    3.496112] firewire_core: created device fw0: GUID 001d72ffae924fff, S400
    [    6.257244] EXT4-fs (sda6): recovery complete
    [    6.257590] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [   15.338585] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   15.363651] udevd[360]: starting version 175
    [   15.400937] lp: driver loaded but no devices found
    [   15.403306] Adding 9068540k swap on /dev/sda5.  Priority:-1 extents:1 across:9068540k 
    [   15.403381] [drm] Initialized drm 1.1.0 20060810
    [   15.424746] [drm] radeon defaulting to kernel modesetting.
    [   15.424750] [drm] radeon kernel modesetting enabled.
    [   15.424810] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   15.424816] radeon 0000:01:00.0: setting latency timer to 64
    [   15.425170] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x174B:0xE990).
    [   15.425195] [drm] register mmio base: 0xFEAF0000
    [   15.425196] [drm] register mmio size: 65536
    [   15.425319] ATOM BIOS: 11X
    [   15.425342] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [   15.425345] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [   15.427461] [drm] Detected VRAM RAM=512M, BAR=256M
    [   15.427464] [drm] RAM width 64bits DDR
    [   15.429123] [TTM] Zone  kernel: Available graphics memory: 408100 kiB.
    [   15.429125] [TTM] Zone highmem: Available graphics memory: 3096904 kiB.
    [   15.429127] [TTM] Initializing pool allocator.
    [   15.429150] [drm] radeon: 512M of VRAM memory ready
    [   15.429152] [drm] radeon: 512M of GTT memory ready.
    [   15.429167] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   15.429168] [drm] Driver supports precise vblank timestamp query.
    [   15.429212] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [   15.429218] radeon 0000:01:00.0: radeon: using MSI.
    [   15.429249] [drm] radeon: irq initialized.
    [   15.429254] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [   15.429986] [drm] Loading RV710 Microcode
    [   15.435207] type=1400 audit(1349719134.958:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=467 comm="apparmor_parser"
    [   15.435653] type=1400 audit(1349719134.958:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=467 comm="apparmor_parser"
    [   15.435898] type=1400 audit(1349719134.958:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser"
    [   15.449855] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   15.449907] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [   15.449933] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [   15.470292] wmi: Mapper loaded
    [   15.492182] cfg80211: Calling CRDA to update world regulatory domain
    [   15.574752] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
    [   15.605912] cfg80211: World regulatory domain updated:
    [   15.605915] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   15.605917] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.605920] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   15.605922] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   15.605925] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.605927] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.624051] usb 1-4: reset high-speed USB device number 2 using ehci_hcd
    [   15.670249] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [   15.670300] radeon 0000:01:00.0: WB enabled
    [   15.716261] [drm] ring test succeeded in 1 usecs
    [   15.716426] [drm] radeon: ib pool ready.
    [   15.716497] [drm] ib test succeeded in 0 usecs
    [   15.716849] [drm] Radeon Display Connectors
    [   15.716851] [drm] Connector 0:
    [   15.716852] [drm]   VGA
    [   15.716855] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [   15.716856] [drm]   Encoders:
    [   15.716858] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
    [   15.716859] [drm] Connector 1:
    [   15.716861] [drm]   HDMI-A
    [   15.716862] [drm]   HPD1
    [   15.716864] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [   15.716865] [drm]   Encoders:
    [   15.716867] [drm]     DFP1: INTERNAL_UNIPHY
    [   15.716868] [drm] Connector 2:
    [   15.716870] [drm]   DVI-I
    [   15.716871] [drm]   HPD4
    [   15.716873] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
    [   15.716874] [drm]   Encoders:
    [   15.716876] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
    [   15.716877] [drm]     DFP2: INTERNAL_UNIPHY2
    [   15.716896] [drm] Internal thermal controller with fan control
    [   15.716938] [drm] radeon: power management initialized
    [   15.772047] init: failsafe main process (735) killed by TERM signal
    [   15.789250] [drm] fb mappable at 0xD0142000
    [   15.789253] [drm] vram apper at 0xD0000000
    [   15.789255] [drm] size 5242880
    [   15.789256] [drm] fb depth is 24
    [   15.789258] [drm]    pitch is 5120
    [   15.789351] fbcon: radeondrmfb (fb0) is primary device
    [   15.789458] Console: switching to colour frame buffer device 160x64
    [   15.789490] fb0: radeondrmfb frame buffer device
    [   15.789492] drm: registered panic notifier
    [   15.789498] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
    [   15.795825] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795829] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795831] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795834] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795836] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795839] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795841] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795844] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795846] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795848] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795850] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795853] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795855] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795858] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795860] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795865] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795867] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795870] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795874] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795877] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   15.795879] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795881] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   15.795884] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795886] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   15.795888] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [   15.795891] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   15.798825] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   15.799456] Registered led device: rt2800usb-phy0::radio
    [   15.799478] Registered led device: rt2800usb-phy0::assoc
    [   15.799500] Registered led device: rt2800usb-phy0::quality
    [   15.799531] usbcore: registered new interface driver rt2800usb
    [   15.823588] Bluetooth: Core ver 2.16
    [   15.823637] NET: Registered protocol family 31
    [   15.823639] Bluetooth: HCI device and connection manager initialized
    [   15.823642] Bluetooth: HCI socket layer initialized
    [   15.823644] Bluetooth: L2CAP socket layer initialized
    [   15.823694] Bluetooth: SCO socket layer initialized
    [   15.830153] Bluetooth: RFCOMM TTY layer initialized
    [   15.830158] Bluetooth: RFCOMM socket layer initialized
    [   15.830160] Bluetooth: RFCOMM ver 1.11
    [   15.838331] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   15.838334] Bluetooth: BNEP filters: protocol multicast
    [   15.869107] ppdev: user-space parallel port driver
    [   15.884186] type=1400 audit(1349719135.410:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=845 comm="apparmor_parser"
    [   15.884725] type=1400 audit(1349719135.410:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=845 comm="apparmor_parser"
    [   16.008200] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   16.064054] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   16.064273] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   16.064601] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   16.212254] type=1400 audit(1349719135.738:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=880 comm="apparmor_parser"
    [   16.212662] type=1400 audit(1349719135.738:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=881 comm="apparmor_parser"
    [   16.213106] type=1400 audit(1349719135.738:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=881 comm="apparmor_parser"
    [   16.213673] type=1400 audit(1349719135.738:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=881 comm="apparmor_parser"
    [   16.217056] type=1400 audit(1349719135.742:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=884 comm="apparmor_parser"
    [   16.260157] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   16.260602] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   16.323891] init: alsa-restore main process (931) terminated with status 19
    
    ........
    
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.2.0-31-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50-Ubuntu SMP Fri Sep 7 16:39:45 UTC 2012 (Ubuntu 3.2.0-31.50-generic-pae 3.2.28)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
    [    0.000000]  BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01100 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed02000 - 00000000fed14c00 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI present.
    [    0.000000] DMI: Acer Aspire X3810/WG43M, BIOS P01-A3 05/26/2009
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x1000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-DFFFF uncachable
    [    0.000000]   E0000-EFFFF write-through
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 1C0000000 mask FC0000000 uncachable
    [    0.000000]   1 base 000000000 mask E00000000 write-back
    [    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] original variable MTRRs
    [    0.000000] reg 0, base: 7GB, range: 1GB, type UC
    [    0.000000] reg 1, base: 0GB, range: 8GB, type WB
    [    0.000000] reg 2, base: 3GB, range: 1GB, type UC
    [    0.000000] total RAM covered: 6144M
    [    0.000000] Found optimal setting for mtrr clean up
    [    0.000000]  gran_size: 64K     chunk_size: 64K     num_reg: 4      lose cover RAM: 0G
    [    0.000000] New variable MTRRs
    [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
    [    0.000000] reg 2, base: 4GB, range: 2GB, type WB
    [    0.000000] reg 3, base: 6GB, range: 1GB, type WB
    [    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] found SMP MP-table at [c00ff780] ff780
    [    0.000000] initial memory mapped : 0 - 02000000
    [    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
    [    0.000000]  0000000000 - 0000200000 page 4k
    [    0.000000]  0000200000 - 0037a00000 page 2M
    [    0.000000]  0037a00000 - 0037bfe000 page 4k
    [    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
    [    0.000000] RAMDISK: 364ee000 - 3726f000
    [    0.000000] ACPI: RSDP 000fa770 00024 (v02 ACPIAM)
    [    0.000000] ACPI: XSDT bff90100 0006C (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: FACP bff90290 000F4 (v04 052609 FACP2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: DSDT bff905c0 061D5 (v02   P01-   P01-A3 000000A3 INTL 20051117)
    [    0.000000] ACPI: FACS bff9e000 00040
    [    0.000000] ACPI: APIC bff90390 0006C (v02 052609 APIC2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: MCFG bff90400 0003C (v01 052609 OEMMCFG  20090526 MSFT 00000097)
    [    0.000000] ACPI: SLIC bff90440 00176 (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: OEMB bff9e040 00072 (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: HPET bff9a5c0 00038 (v01 052609 OEMHPET  20090526 MSFT 00000097)
    [    0.000000] ACPI: GSCI bff9e0c0 02024 (v01 052609 GMCHSCI  20090526 MSFT 00000097)
    [    0.000000] ACPI: AWMI bffa00f0 0004E (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: SSDT bffa0940 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 6276MB HIGHMEM available.
    [    0.000000] 891MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 37bfe000
    [    0.000000]   low ram: 0 - 37bfe000
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x00037bfe
    [    0.000000]   HighMem  0x00037bfe -> 0x001c0000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009e
    [    0.000000]     0: 0x00000100 -> 0x000bff90
    [    0.000000]     0: 0x00100000 -> 0x001c0000
    [    0.000000] On node 0 totalpages: 1572638
    [    0.000000] free_area_init_node: node 0, pgdat c1868a80, node_mem_map f2cee200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3950 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1752 pages used for memmap
    [    0.000000]   Normal zone: 222502 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 12553 pages used for memmap
    [    0.000000]   HighMem zone: 1331849 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34240 r0 d23104 u57344
    [    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1558301
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic-pae root=UUID=3169b696-02b9-4593-b5f7-30c72e816dc7 ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 29359872 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00037bfe:001c0000)
    [    0.000000] Memory: 6179240k/7340032k available (5818k kernel code, 111312k reserved, 2846k data, 740k init, 5377608k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    [    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    [    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
    [    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
    [    0.000000]       .data : 0xc15ae8bc - 0xc1876280   (2846 kB)
    [    0.000000]       .text : 0xc1000000 - 0xc15ae8bc   (5818 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:2304 nr_irqs:712 16
    [    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2327.731 MHz processor.
    [    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.46 BogoMIPS (lpj=9310924)
    [    0.004006] pid_max: default: 32768 minimum: 301
    [    0.004026] Security Framework initialized
    [    0.004041] AppArmor: AppArmor initialized
    [    0.004043] Yama: becoming mindful.
    [    0.004093] Mount-cache hash table entries: 512
    [    0.004217] Initializing cgroup subsys cpuacct
    [    0.004223] Initializing cgroup subsys memory
    [    0.004230] Initializing cgroup subsys devices
    [    0.004232] Initializing cgroup subsys freezer
    [    0.004234] Initializing cgroup subsys blkio
    [    0.004240] Initializing cgroup subsys perf_event
    [    0.004264] CPU: Physical Processor ID: 0
    [    0.004266] CPU: Processor Core ID: 0
    [    0.004269] mce: CPU supports 6 MCE banks
    [    0.004276] CPU0: Thermal monitoring enabled (TM2)
    [    0.004279] using mwait in idle threads.
    [    0.009713] ACPI: Core revision 20110623
    [    0.016011] ftrace: allocating 26555 entries in 52 pages
    [    0.024042] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.024386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.066481] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
    [    0.068003] APIC calibration not consistent with PM-Timer: 135ms instead of 100ms
    [    0.068003] APIC delta adjusted to PM-Timer: 2078348 (2826523)
    [    0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [    0.068003] ... version:                2
    [    0.068003] ... bit width:              40
    [    0.068003] ... generic registers:      2
    [    0.068003] ... value mask:             000000ffffffffff
    [    0.068003] ... max period:             000000007fffffff
    [    0.068003] ... fixed-purpose events:   3
    [    0.068003] ... event mask:             0000000700000003
    [    0.068003] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.068003] CPU 1 irqstacks, hard=f7512000 soft=f7514000
    [    0.068003] Booting Node   0, Processors  #1
    [    0.068003] smpboot cpu 1: start_ip = 9a000
    [    0.008000] Initializing CPU#1
    [    0.156033] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.156124] CPU 2 irqstacks, hard=f7520000 soft=f7522000
    [    0.156126]  #2
    [    0.156128] smpboot cpu 2: start_ip = 9a000
    [    0.008000] Initializing CPU#2
    [    0.248031] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.248117] CPU 3 irqstacks, hard=f752e000 soft=f7538000
    [    0.248118]  #3 Ok.
    [    0.248120] smpboot cpu 3: start_ip = 9a000
    [    0.008000] Initializing CPU#3
    [    0.340037] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.340060] Brought up 4 CPUs
    [    0.340063] Total of 4 processors activated (18621.96 BogoMIPS).
    [    0.343012] devtmpfs: initialized
    [    0.343012] EVM: security.selinux
    [    0.343012] EVM: security.SMACK64
    [    0.343012] EVM: security.capability
    [    0.343012] PM: Registering ACPI NVS region at bff9e000 (270336 bytes)
    [    0.344574] print_constraints: dummy: 
    [    0.344601] RTC time: 18:40:09, date: 10/07/12
    [    0.344639] NET: Registered protocol family 16
    [    0.344648] Trying to unpack rootfs image as initramfs...
    [    0.344769] EISA bus registered
    [    0.344796] ACPI: bus type pci registered
    [    0.344859] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.344862] PCI: not using MMCONFIG
    [    0.344936] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
    [    0.344995] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    [    0.344997] PCI: Using configuration type 1 for base access
    [    0.346082] bio: create slab <bio-0> at 0
    [    0.346082] ACPI: Added _OSI(Module Device)
    [    0.346082] ACPI: Added _OSI(Processor Device)
    [    0.346082] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.346082] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.346082] ACPI: EC: Look up EC in DSDT
    [    0.348958] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.351649] ACPI: SSDT bffa0140 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.351959] ACPI: Dynamic OEM Table Load:
    [    0.351962] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.352255] ACPI: SSDT bffa0340 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.352564] ACPI: Dynamic OEM Table Load:
    [    0.352567] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.352845] ACPI: SSDT bffa0540 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.353155] ACPI: Dynamic OEM Table Load:
    [    0.353158] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.353428] ACPI: SSDT bffa0740 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.353740] ACPI: Dynamic OEM Table Load:
    [    0.353744] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.353931] ACPI: Interpreter enabled
    [    0.353937] ACPI: (supports S0 S3 S4 S5)
    [    0.353956] ACPI: Using IOAPIC for interrupt routing
    [    0.353982] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.355174] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [    0.355177] PCI: Using MMCONFIG for extended config space
    [    0.360658] ACPI: No dock devices found.
    [    0.360661] HEST: Table not found.
    [    0.360666] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.360751] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.360928] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
    [    0.360931] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
    [    0.360934] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.360936] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [    0.360939] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [    0.360941] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
    [    0.360954] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [    0.360998] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [    0.361036] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [    0.361039] pci 0000:00:01.0: PME# disabled
    [    0.361077] pci 0000:00:19.0: [8086:10ce] type 0 class 0x000200
    [    0.361094] pci 0000:00:19.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
    [    0.361102] pci 0000:00:19.0: reg 14: [mem 0xfe9de000-0xfe9defff]
    [    0.361111] pci 0000:00:19.0: reg 18: [io  0xcc00-0xcc1f]
    [    0.361170] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [    0.361173] pci 0000:00:19.0: PME# disabled
    [    0.361191] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [    0.361231] pci 0000:00:1a.0: reg 20: [io  0xc880-0xc89f]
    [    0.361279] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [    0.361320] pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
    [    0.361368] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [    0.361408] pci 0000:00:1a.2: reg 20: [io  0xc480-0xc49f]
    [    0.361464] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [    0.361484] pci 0000:00:1a.7: reg 10: [mem 0xfe9dc000-0xfe9dc3ff]
    [    0.361570] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [    0.361574] pci 0000:00:1a.7: PME# disabled
    [    0.361596] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [    0.361611] pci 0000:00:1b.0: reg 10: [mem 0xfe9d8000-0xfe9dbfff 64bit]
    [    0.361673] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.361677] pci 0000:00:1b.0: PME# disabled
    [    0.361696] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [    0.361760] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.361764] pci 0000:00:1c.0: PME# disabled
    [    0.361790] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [    0.361832] pci 0000:00:1d.0: reg 20: [io  0xc400-0xc41f]
    [    0.361881] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [    0.361920] pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
    [    0.361968] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [    0.362008] pci 0000:00:1d.2: reg 20: [io  0xc000-0xc01f]
    [    0.362064] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [    0.362084] pci 0000:00:1d.7: reg 10: [mem 0xfe9d6000-0xfe9d63ff]
    [    0.362171] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.362175] pci 0000:00:1d.7: PME# disabled
    [    0.362194] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [    0.362253] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
    [    0.362365] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
    [    0.362382] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
    [    0.362390] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
    [    0.362398] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
    [    0.362405] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
    [    0.362414] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb41f]
    [    0.362422] pci 0000:00:1f.2: reg 24: [mem 0xfe9d4000-0xfe9d47ff]
    [    0.362465] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.362469] pci 0000:00:1f.2: PME# disabled
    [    0.362484] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [    0.362498] pci 0000:00:1f.3: reg 10: [mem 0xfe9d3c00-0xfe9d3cff 64bit]
    [    0.362518] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
    [    0.362575] pci 0000:01:00.0: [1002:954f] type 0 class 0x000300
    [    0.362588] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.362599] pci 0000:01:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff 64bit]
    [    0.362606] pci 0000:01:00.0: reg 20: [io  0xd000-0xd0ff]
    [    0.362619] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
    [    0.362649] pci 0000:01:00.0: supports D1 D2
    [    0.362668] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
    [    0.362681] pci 0000:01:00.1: reg 10: [mem 0xfeaec000-0xfeaeffff 64bit]
    [    0.362740] pci 0000:01:00.1: supports D1 D2
    [    0.362769] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.362772] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.362776] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.362780] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.362835] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
    [    0.362857] pci 0000:02:00.0: reg 10: [mem 0xfebff800-0xfebfffff 64bit]
    [    0.362869] pci 0000:02:00.0: reg 18: [io  0xe800-0xe8ff]
    [    0.362961] pci 0000:02:00.0: supports D2
    [    0.362963] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
    [    0.362968] pci 0000:02:00.0: PME# disabled
    [    0.368040] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.368045] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.368049] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.368112] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [    0.368122] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.368124] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.368127] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.368129] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [    0.368132] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [    0.368134] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
    [    0.368152] pci_bus 0000:00: on NUMA node 0
    [    0.368162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.368376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [    0.368428]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.368431]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.368433] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.377212] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
    [    0.377261] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
    [    0.377304] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
    [    0.377351] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
    [    0.377397] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15)
    [    0.377443] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
    [    0.377490] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
    [    0.377536] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
    [    0.377648] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.377648] vgaarb: loaded
    [    0.377648] vgaarb: bridge control possible 0000:01:00.0
    [    0.377648] i2c-core: driver [aat2870] using legacy suspend method
    [    0.377648] i2c-core: driver [aat2870] using legacy resume method
    [    0.377648] SCSI subsystem initialized
    [    0.377648] libata version 3.00 loaded.
    [    0.377648] usbcore: registered new interface driver usbfs
    [    0.377648] usbcore: registered new interface driver hub
    [    0.377648] usbcore: registered new device driver usb
    [    0.377648] PCI: Using ACPI for IRQ routing
    [    0.377648] PCI: pci_cache_line_size set to 64 bytes
    [    0.377648] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
    [    0.377648] reserve RAM buffer: 00000000bff90000 - 00000000bfffffff 
    [    0.377648] NetLabel: Initializing
    [    0.377648] NetLabel:  domain hash size = 128
    [    0.377648] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.377648] NetLabel:  unlabeled traffic allowed by default
    [    0.377648] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [    0.377648] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [    0.377648] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [    0.392165] Switching to clocksource hpet
    [    0.400292] AppArmor: AppArmor Filesystem Enabled
    [    0.400321] pnp: PnP ACPI init
    [    0.400338] ACPI: bus type pnp registered
    [    0.400455] pnp 00:00: [bus 00-ff]
    [    0.400458] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.400460] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.400462] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.400464] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.400467] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [    0.400469] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [    0.400471] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
    [    0.400527] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.400537] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [    0.400539] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [    0.400594] system 00:01: [mem 0xfed14000-0xfed19fff] could not be reserved
    [    0.400597] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [    0.400600] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.400636] pnp 00:02: [dma 4]
    [    0.400638] pnp 00:02: [io  0x0000-0x000f]
    [    0.400640] pnp 00:02: [io  0x0081-0x0083]
    [    0.400642] pnp 00:02: [io  0x0087]
    [    0.400644] pnp 00:02: [io  0x0089-0x008b]
    [    0.400646] pnp 00:02: [io  0x008f]
    [    0.400648] pnp 00:02: [io  0x00c0-0x00df]
    [    0.400675] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.400686] pnp 00:03: [io  0x0070-0x0071]
    [    0.400696] pnp 00:03: [irq 8]
    [    0.400725] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.400753] pnp 00:04: [io  0x0060]
    [    0.400756] pnp 00:04: [io  0x0064]
    [    0.400761] pnp 00:04: [irq 1]
    [    0.400789] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.400833] pnp 00:05: [irq 12]
    [    0.400862] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [    0.400871] pnp 00:06: [io  0x0061]
    [    0.400901] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.400910] pnp 00:07: [io  0x00f0-0x00ff]
    [    0.400915] pnp 00:07: [irq 13]
    [    0.400943] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.401338] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
    [    0.401341] pnp 00:08: [io  0x0a00-0x0a0f]
    [    0.401343] pnp 00:08: [io  0x0a10-0x0a1f]
    [    0.401347] pnp 00:08: [io  0x0a20-0x0a2f]
    [    0.401349] pnp 00:08: [io  0x0a30-0x0a3f]
    [    0.401400] system 00:08: [io  0x0a00-0x0a0f] has been reserved
    [    0.401402] system 00:08: [io  0x0a10-0x0a1f] has been reserved
    [    0.401405] system 00:08: [io  0x0a20-0x0a2f] has been reserved
    [    0.401407] system 00:08: [io  0x0a30-0x0a3f] has been reserved
    [    0.401411] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401519] pnp 00:09: [io  0x0010-0x001f]
    [    0.401522] pnp 00:09: [io  0x0022-0x003f]
    [    0.401524] pnp 00:09: [io  0x0044-0x005f]
    [    0.401526] pnp 00:09: [io  0x0062-0x0063]
    [    0.401528] pnp 00:09: [io  0x0065-0x006f]
    [    0.401529] pnp 00:09: [io  0x0072-0x007f]
    [    0.401531] pnp 00:09: [io  0x0080]
    [    0.401533] pnp 00:09: [io  0x0084-0x0086]
    [    0.401535] pnp 00:09: [io  0x0088]
    [    0.401537] pnp 00:09: [io  0x008c-0x008e]
    [    0.401539] pnp 00:09: [io  0x0090-0x009f]
    [    0.401541] pnp 00:09: [io  0x00a2-0x00bf]
    [    0.401543] pnp 00:09: [io  0x00e0-0x00ef]
    [    0.401545] pnp 00:09: [io  0x04d0-0x04d1]
    [    0.401547] pnp 00:09: [io  0x0800-0x087f]
    [    0.401549] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
    [    0.401551] pnp 00:09: [io  0x0500-0x057f]
    [    0.401553] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [    0.401555] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [    0.401557] pnp 00:09: [mem 0xfed40000-0xfed8ffff]
    [    0.401618] system 00:09: [io  0x04d0-0x04d1] has been reserved
    [    0.401621] system 00:09: [io  0x0800-0x087f] has been reserved
    [    0.401623] system 00:09: [io  0x0500-0x057f] has been reserved
    [    0.401626] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.401629] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.401632] system 00:09: [mem 0xfed40000-0xfed8ffff] has been reserved
    [    0.401635] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401690] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
    [    0.401720] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.401769] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
    [    0.401771] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [    0.401804] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.401844] pnp 00:0c: [mem 0xffc00000-0xffefffff]
    [    0.401893] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
    [    0.401896] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401974] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
    [    0.401977] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
    [    0.402026] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.402029] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.402033] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.402077] pnp 00:0e: [mem 0xe0000000-0xefffffff]
    [    0.402124] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.402127] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.402302] pnp 00:0f: [mem 0x00000000-0x0009ffff]
    [    0.402305] pnp 00:0f: [mem 0x000c0000-0x000cffff]
    [    0.402307] pnp 00:0f: [mem 0x000e0000-0x000fffff]
    [    0.402309] pnp 00:0f: [mem 0x00100000-0xbfffffff]
    [    0.402311] pnp 00:0f: [mem 0xfed90000-0xffffffff]
    [    0.402372] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.402375] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
    [    0.402377] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.402380] system 00:0f: [mem 0x00100000-0xbfffffff] could not be reserved
    [    0.402383] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
    [    0.402386] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.402516] pnp: PnP ACPI: found 16 devices
    [    0.402517] ACPI: ACPI bus type pnp unregistered
    [    0.402520] PnPBIOS: Disabled by ACPI PNP
    [    0.440589] PCI: max bus depth: 1 pci_try_num: 2
    [    0.440621] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440624] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.440627] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.440631] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.440634] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.440638] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.440641] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.440645] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.440649] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440655] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [    0.440681] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.440685] pci 0000:00:01.0: setting latency timer to 64
    [    0.440695] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.440699] pci 0000:00:1c.0: setting latency timer to 64
    [    0.440705] pci 0000:00:1e.0: setting latency timer to 64
    [    0.440709] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.440711] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.440713] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.440715] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.440718] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.440720] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.440723] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
    [    0.440725] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [    0.440728] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.440730] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
    [    0.440732] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [    0.440735] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440737] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
    [    0.440740] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
    [    0.440742] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.440744] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.440747] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.440749] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.440791] NET: Registered protocol family 2
    [    0.440862] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.441082] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.441408] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.441574] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.441576] TCP reno registered
    [    0.441579] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.441587] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.441668] NET: Registered protocol family 1
    [    0.441698] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.441715] pci 0000:00:1a.0: PCI INT A disabled
    [    0.441729] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.441744] pci 0000:00:1a.1: PCI INT B disabled
    [    0.441754] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.441769] pci 0000:00:1a.2: PCI INT D disabled
    [    0.441780] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.441810] pci 0000:00:1a.7: PCI INT C disabled
    [    0.441825] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.441840] pci 0000:00:1d.0: PCI INT A disabled
    [    0.441846] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.441861] pci 0000:00:1d.1: PCI INT B disabled
    [    0.441867] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.441882] pci 0000:00:1d.2: PCI INT C disabled
    [    0.441890] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.441903] pci 0000:00:1d.7: PCI INT A disabled
    [    0.441917] pci 0000:01:00.0: Boot video device
    [    0.441925] PCI: CLS 32 bytes, default 64
    [    0.442416] audit: initializing netlink socket (disabled)
    [    0.442425] type=2000 audit(1349635208.436:1): initialized
    [    0.463423] highmem bounce pool size: 64 pages
    [    0.463428] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.466064] VFS: Disk quotas dquot_6.5.2
    [    0.466127] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.466708] fuse init (API version 7.17)
    [    0.466824] msgmni has been set to 1565
    [    0.467374] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.467415] io scheduler noop registered
    [    0.467421] io scheduler deadline registered
    [    0.467431] io scheduler cfq registered (default)
    [    0.467543] pcieport 0000:00:01.0: setting latency timer to 64
    [    0.467573] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [    0.467621] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.467655] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [    0.467733] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.467757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.467819] intel_idle: MWAIT substates: 0x20
    [    0.467820] intel_idle: does not run on family 6 model 23
    [    0.467901] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.467907] ACPI: Power Button [PWRB]
    [    0.467952] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.467955] ACPI: Power Button [PWRF]
    [    0.470625] ERST: Table is not found!
    [    0.470627] GHES: HEST is not enabled!
    [    0.470717] isapnp: Scanning for PnP cards...
    [    0.470742] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    0.631377] Freeing initrd memory: 13828k freed
    [    0.823613] isapnp: No Plug & Play device found
    [    0.880519] Linux agpgart interface v0.103
    [    0.882636] brd: module loaded
    [    0.883657] loop: module loaded
    [    0.883798] ahci 0000:00:1f.2: version 3.0
    [    0.883810] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.883848] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [    0.883894] ahci: SSS flag set, parallel bus scan disabled
    [    0.883926] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [    0.883929] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
    [    0.883933] ahci 0000:00:1f.2: setting latency timer to 64
    [    0.924606] scsi0 : ahci
    [    0.924720] scsi1 : ahci
    [    0.924818] scsi2 : ahci
    [    0.924917] scsi3 : ahci
    [    0.925019] scsi4 : ahci
    [    0.925117] scsi5 : ahci
    [    0.925281] ata1: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4100 irq 42
    [    0.925284] ata2: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4180 irq 42
    [    0.925286] ata3: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4200 irq 42
    [    0.925289] ata4: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4280 irq 42
    [    0.925291] ata5: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4300 irq 42
    [    0.925294] ata6: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4380 irq 42
    [    0.925706] Fixed MDIO Bus: probed
    [    0.925726] tun: Universal TUN/TAP device driver, 1.6
    [    0.925729] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.925808] PPP generic driver version 2.4.2
    [    0.925966] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.925983] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.925996] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    0.925999] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    0.926066] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    0.926089] ehci_hcd 0000:00:1a.7: debug port 1
    [    0.929958] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [    0.929972] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9dc000
    [    0.944015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [    0.944181] hub 1-0:1.0: USB hub found
    [    0.944186] hub 1-0:1.0: 6 ports detected
    [    0.944267] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.944277] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.944281] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.944352] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    0.944372] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.948241] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    0.948255] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9d6000
    [    0.964014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.964150] hub 2-0:1.0: USB hub found
    [    0.964154] hub 2-0:1.0: 6 ports detected
    [    0.964228] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.964242] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.964257] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.964264] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [    0.964267] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    0.964329] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    0.964360] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
    [    0.964508] hub 3-0:1.0: USB hub found
    [    0.964512] hub 3-0:1.0: 2 ports detected
    [    0.964577] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.964583] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    0.964586] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    0.964661] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    0.964690] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
    [    0.964838] hub 4-0:1.0: USB hub found
    [    0.964842] hub 4-0:1.0: 2 ports detected
    [    0.964908] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.964915] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [    0.964918] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [    0.964987] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [    0.965017] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
    [    0.965161] hub 5-0:1.0: USB hub found
    [    0.965165] hub 5-0:1.0: 2 ports detected
    [    0.965226] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.965232] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.965235] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.965300] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [    0.965321] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
    [    0.965474] hub 6-0:1.0: USB hub found
    [    0.965477] hub 6-0:1.0: 2 ports detected
    [    0.965539] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.965545] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.965548] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.965614] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [    0.965634] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
    [    0.965781] hub 7-0:1.0: USB hub found
    [    0.965785] hub 7-0:1.0: 2 ports detected
    [    0.965846] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.965852] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.965855] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.965921] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [    0.965942] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
    [    0.966093] hub 8-0:1.0: USB hub found
    [    0.966097] hub 8-0:1.0: 2 ports detected
    [    0.966214] usbcore: registered new interface driver libusual
    [    0.966272] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [    0.966633] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.966640] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.966797] mousedev: PS/2 mouse device common for all mice
    [    0.967014] rtc_cmos 00:03: RTC can wake from S4
    [    0.967136] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    0.967158] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    0.967217] device-mapper: uevent: version 1.0.3
    [    0.967312] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    [    0.967344] EISA: Probing bus 0 at eisa.0
    [    0.967347] EISA: Cannot allocate resource for mainboard
    [    0.967349] Cannot allocate resource for EISA slot 1
    [    0.967350] Cannot allocate resource for EISA slot 2
    [    0.967352] Cannot allocate resource for EISA slot 3
    [    0.967354] Cannot allocate resource for EISA slot 4
    [    0.967355] Cannot allocate resource for EISA slot 5
    [    0.967357] Cannot allocate resource for EISA slot 6
    [    0.967359] Cannot allocate resource for EISA slot 7
    [    0.967360] Cannot allocate resource for EISA slot 8
    [    0.967362] EISA: Detected 0 cards.
    [    0.967371] cpufreq-nforce2: No nForce2 chipset.
    [    0.967373] cpuidle: using governor ladder
    [    0.967375] cpuidle: using governor menu
    [    0.967376] EFI Variables Facility v0.08 2004-May-17
    [    0.967641] TCP cubic registered
    [    0.967765] NET: Registered protocol family 10
    [    0.968334] NET: Registered protocol family 17
    [    0.968338] Registering the dns_resolver key type
    [    0.968360] Using IPI No-Shortcut mode
    [    0.968527] PM: Hibernation image not present or could not be loaded.
    [    0.968539] registered taskstats version 1
    [    0.975565]   Magic number: 0:592:695
    [    0.975608] pci 0000:00:00.0: hash matches
    [    0.975666] rtc_cmos 00:03: setting system clock to 2012-10-07 18:40:10 UTC (1349635210)
    [    0.976725] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.976727] EDD information not available.
    [    0.983361] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.244021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.247033] ata1.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
    [    1.250904] ata1.00: configured for UDMA/100
    [    1.256016] usb 1-4: new high-speed USB device number 2 using ehci_hcd
    [    1.261622] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH40F     MG01 PQ: 0 ANSI: 5
    [    1.270067] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.270071] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.270217] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    1.270302] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    1.440016] Refined TSC clocksource calibration: 2327.754 MHz.
    [    1.440021] Switching to clocksource tsc
    [    1.572012] usb 2-3: new high-speed USB device number 2 using ehci_hcd
    [    1.588016] ata2: SATA link down (SStatus 0 SControl 300)
    [    1.708358] Initializing USB Mass Storage driver...
    [    1.708524] scsi6 : usb-storage 2-3:1.0
    [    1.708604] usbcore: registered new interface driver usb-storage
    [    1.708606] USB Mass Storage support registered.
    [    1.908014] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.944010] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [    2.228015] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    2.247643] ata4.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
    [    2.247647] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [    2.248664] ata4.00: configured for UDMA/133
    [    2.248785] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
    [    2.248945] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    2.248952] sd 3:0:0:0: Attached scsi generic sg1 type 0
    [    2.249018] sd 3:0:0:0: [sda] Write Protect is off
    [    2.249021] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.249057] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.291539]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    2.291954] sd 3:0:0:0: [sda] Attached SCSI disk
    [    2.568014] ata5: SATA link down (SStatus 0 SControl 300)
    [    2.708842] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
    [    2.709466] scsi 6:0:0:1: Direct-Access     Multiple Flash Reader     1.05 PQ: 0 ANSI: 0
    [    2.710273] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [    2.710478] sd 6:0:0:1: Attached scsi generic sg3 type 0
    [    2.713944] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [    2.714706] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [    2.888014] ata6: SATA link down (SStatus 0 SControl 300)
    [    2.888107] Freeing unused kernel memory: 740k freed
    [    2.888365] Write protecting the kernel text: 5820k
    [    2.888394] Write protecting the kernel read-only data: 2376k
    [    2.888395] NX-protecting the kernel data: 4420k
    [    2.905419] udevd[113]: starting version 175
    [    2.938574] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
    [    2.938577] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [    2.938617] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    2.938626] e1000e 0000:00:19.0: setting latency timer to 64
    [    2.938715] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [    2.950042] generic-usb 0003:058F:6363.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.7-3/input1
    [    2.957113] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.957121] firewire_ohci 0000:02:00.0: setting latency timer to 64
    [    2.965595] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
    [    2.965699] generic-usb 0003:046D:C51B.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-1/input0
    [    2.979142] generic-usb 0003:046D:C51B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input1
    [    2.979166] usbcore: registered new interface driver usbhid
    [    2.979168] usbhid: USB HID core driver
    [    3.020051] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
    [    3.126350] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:f4:ca:94
    [    3.126353] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [    3.126376] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
    [    3.520089] firewire_core: created device fw0: GUID 001d72ffae924fff, S400
    [    3.591332] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [   12.922233] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   12.938394] udevd[334]: starting version 175
    [   12.973776] lp: driver loaded but no devices found
    [   12.985516] [drm] Initialized drm 1.1.0 20060810
    [   12.991296] Adding 9068540k swap on /dev/sda5.  Priority:-1 extents:1 across:9068540k 
    [   13.002830] cfg80211: Calling CRDA to update world regulatory domain
    [   13.012940] [drm] radeon defaulting to kernel modesetting.
    [   13.012942] [drm] radeon kernel modesetting enabled.
    [   13.013029] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   13.013035] radeon 0000:01:00.0: setting latency timer to 64
    [   13.013721] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x174B:0xE990).
    [   13.013744] [drm] register mmio base: 0xFEAF0000
    [   13.013746] [drm] register mmio size: 65536
    [   13.013863] ATOM BIOS: 11X
    [   13.014074] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [   13.014077] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [   13.016245] [drm] Detected VRAM RAM=512M, BAR=256M
    [   13.016248] [drm] RAM width 64bits DDR
    [   13.016589] [TTM] Zone  kernel: Available graphics memory: 408100 kiB.
    [   13.016591] [TTM] Zone highmem: Available graphics memory: 3096904 kiB.
    [   13.016593] [TTM] Initializing pool allocator.
    [   13.016618] [drm] radeon: 512M of VRAM memory ready
    [   13.016620] [drm] radeon: 512M of GTT memory ready.
    [   13.016690] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   13.016692] [drm] Driver supports precise vblank timestamp query.
    [   13.016738] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [   13.016743] radeon 0000:01:00.0: radeon: using MSI.
    [   13.016776] [drm] radeon: irq initialized.
    [   13.016781] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [   13.017874] [drm] Loading RV710 Microcode
    [   13.027014] type=1400 audit(1349628022.547:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=438 comm="apparmor_parser"
    [   13.027426] type=1400 audit(1349628022.547:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=438 comm="apparmor_parser"
    [   13.027662] type=1400 audit(1349628022.547:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=438 comm="apparmor_parser"
    [   13.028615] wmi: Mapper loaded
    [   13.098258] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   13.098304] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [   13.098857] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [   13.133985] usb 1-4: reset high-speed USB device number 2 using ehci_hcd
    [   13.183809] cfg80211: World regulatory domain updated:
    [   13.183812] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   13.183815] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.183818] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.183820] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.183823] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.183825] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.229403] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [   13.229460] radeon 0000:01:00.0: WB enabled
    [   13.275394] [drm] ring test succeeded in 1 usecs
    [   13.275534] [drm] radeon: ib pool ready.
    [   13.275613] [drm] ib test succeeded in 0 usecs
    [   13.276163] [drm] Radeon Display Connectors
    [   13.276165] [drm] Connector 0:
    [   13.276167] [drm]   VGA
    [   13.276169] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [   13.276171] [drm]   Encoders:
    [   13.276172] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
    [   13.276173] [drm] Connector 1:
    [   13.276175] [drm]   HDMI-A
    [   13.276176] [drm]   HPD1
    [   13.276178] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [   13.276180] [drm]   Encoders:
    [   13.276181] [drm]     DFP1: INTERNAL_UNIPHY
    [   13.276183] [drm] Connector 2:
    [   13.276184] [drm]   DVI-I
    [   13.276185] [drm]   HPD4
    [   13.276187] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
    [   13.276189] [drm]   Encoders:
    [   13.276190] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
    [   13.276192] [drm]     DFP2: INTERNAL_UNIPHY2
    [   13.276210] [drm] Internal thermal controller with fan control
    [   13.276255] [drm] radeon: power management initialized
    [   13.307581] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307585] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307587] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307590] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307592] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307594] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307596] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307599] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307601] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307604] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307606] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307608] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307611] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307613] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307615] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307618] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307620] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307623] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307625] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307627] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307630] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.307634] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307637] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.307639] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307642] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.307644] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [   13.307646] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.310106] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   13.310734] Registered led device: rt2800usb-phy0::radio
    [   13.310756] Registered led device: rt2800usb-phy0::assoc
    [   13.310778] Registered led device: rt2800usb-phy0::quality
    [   13.310810] usbcore: registered new interface driver rt2800usb
    [   13.349802] [drm] fb mappable at 0xD0142000
    [   13.349805] [drm] vram apper at 0xD0000000
    [   13.349807] [drm] size 5242880
    [   13.349808] [drm] fb depth is 24
    [   13.349809] [drm]    pitch is 5120
    [   13.349909] fbcon: radeondrmfb (fb0) is primary device
    [   13.350013] Console: switching to colour frame buffer device 160x64
    [   13.350044] fb0: radeondrmfb frame buffer device
    [   13.350046] drm: registered panic notifier
    [   13.350052] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
    [   13.357981] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
    [   13.691081] init: failsafe main process (764) killed by TERM signal
    [   13.734871] Bluetooth: Core ver 2.16
    [   13.734901] NET: Registered protocol family 31
    [   13.734903] Bluetooth: HCI device and connection manager initialized
    [   13.734905] Bluetooth: HCI socket layer initialized
    [   13.734907] Bluetooth: L2CAP socket layer initialized
    [   13.734955] Bluetooth: SCO socket layer initialized
    [   13.738421] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   13.738424] Bluetooth: BNEP filters: protocol multicast
    [   13.744669] Bluetooth: RFCOMM TTY layer initialized
    [   13.744675] Bluetooth: RFCOMM socket layer initialized
    [   13.744676] Bluetooth: RFCOMM ver 1.11
    [   13.758403] ppdev: user-space parallel port driver
    [   13.774004] type=1400 audit(1349628023.295:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=837 comm="apparmor_parser"
    [   13.774525] type=1400 audit(1349628023.295:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=837 comm="apparmor_parser"
    [   13.923617] type=1400 audit(1349628023.443:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=873 comm="apparmor_parser"
    [   13.923786] type=1400 audit(1349628023.443:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=872 comm="apparmor_parser"
    [   13.923970] type=1400 audit(1349628023.443:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=876 comm="apparmor_parser"
    [   13.924142] type=1400 audit(1349628023.447:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=873 comm="apparmor_parser"
    [   13.924383] type=1400 audit(1349628023.447:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=873 comm="apparmor_parser"
    [   13.961981] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   14.014698] init: alsa-restore main process (917) terminated with status 19
    [   14.016164] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   14.016392] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.016738] ADDRCONF(NETDEV_UP): eth0: link is not ready
    
    ....
    
    [    16.373] 
    X.Org X Server 1.11.3
    Release Date: 2011-12-16
    [    16.373] X Protocol Version 11, Revision 0
    [    16.373] Build Operating System: Linux 2.6.42-26-generic i686 Ubuntu
    [    16.373] Current Operating System: Linux Compuabajo 3.2.0-31-generic-pae #50-Ubuntu SMP Fri Sep 7 16:39:45 UTC 2012 i686
    [    16.373] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic-pae root=UUID=3169b696-02b9-4593-b5f7-30c72e816dc7 ro quiet splash vt.handoff=7
    [    16.373] Build Date: 29 August 2012  12:10:05AM
    [    16.373] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) 
    [    16.373] Current version of pixman: 0.24.4
    [    16.373]     Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    [    16.373] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    16.373] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct  8 19:58:55 2012
    [    16.399] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    16.399] (==) No Layout section.  Using the first Screen section.
    [    16.399] (==) No screen section available. Using defaults.
    [    16.399] (**) |-->Screen "Default Screen Section" (0)
    [    16.399] (**) |   |-->Monitor "<default monitor>"
    [    16.399] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
    [    16.399] (==) Automatically adding devices
    [    16.399] (==) Automatically enabling devices
    [    16.399] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [    16.399]     Entry deleted from font path.
    [    16.399] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    [    16.399]     Entry deleted from font path.
    [    16.399] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    [    16.399]     Entry deleted from font path.
    [    16.399] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    [    16.399]     Entry deleted from font path.
    [    16.399] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    [    16.399]     Entry deleted from font path.
    [    16.399] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
    [    16.399]     Entry deleted from font path.
    [    16.399] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/Type1,
        built-ins
    [    16.399] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    [    16.399] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    16.399] (II) Loader magic: 0xb77495a0
    [    16.399] (II) Module ABI versions:
    [    16.399]     X.Org ANSI C Emulation: 0.4
    [    16.399]     X.Org Video Driver: 11.0
    [    16.399]     X.Org XInput driver : 16.0
    [    16.399]     X.Org Server Extension : 6.0
    [    16.400] (--) PCI:*(0:1:0:0) 1002:954f:174b:e990 rev 0, Mem @ 0xd0000000/268435456, 0xfeaf0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
    [    16.400] (II) Open ACPI successful (/var/run/acpid.socket)
    [    16.400] (II) LoadModule: "extmod"
    [    16.476] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [    16.476] (II) Module extmod: vendor="X.Org Foundation"
    [    16.476]     compiled for 1.11.3, module version = 1.0.0
    [    16.476]     Module class: X.Org Server Extension
    [    16.476]     ABI class: X.Org Server Extension, version 6.0
    [    16.476] (II) Loading extension MIT-SCREEN-SAVER
    [    16.476] (II) Loading extension XFree86-VidModeExtension
    [    16.476] (II) Loading extension XFree86-DGA
    [    16.476] (II) Loading extension DPMS
    [    16.476] (II) Loading extension XVideo
    [    16.476] (II) Loading extension XVideo-MotionCompensation
    [    16.476] (II) Loading extension X-Resource
    [    16.476] (II) LoadModule: "dbe"
    [    16.476] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [    16.476] (II) Module dbe: vendor="X.Org Foundation"
    [    16.476]     compiled for 1.11.3, module version = 1.0.0
    [    16.476]     Module class: X.Org Server Extension
    [    16.476]     ABI class: X.Org Server Extension, version 6.0
    [    16.476] (II) Loading extension DOUBLE-BUFFER
    [    16.476] (II) LoadModule: "glx"
    [    16.477] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [    16.477] (II) Module glx: vendor="X.Org Foundation"
    [    16.477]     compiled for 1.11.3, module version = 1.0.0
    [    16.477]     ABI class: X.Org Server Extension, version 6.0
    [    16.477] (==) AIGLX enabled
    [    16.477] (II) Loading extension GLX
    [    16.477] (II) LoadModule: "record"
    [    16.477] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [    16.477] (II) Module record: vendor="X.Org Foundation"
    [    16.477]     compiled for 1.11.3, module version = 1.13.0
    [    16.477]     Module class: X.Org Server Extension
    [    16.477]     ABI class: X.Org Server Extension, version 6.0
    [    16.477] (II) Loading extension RECORD
    [    16.477] (II) LoadModule: "dri"
    [    16.477] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    16.478] (II) Module dri: vendor="X.Org Foundation"
    [    16.478]     compiled for 1.11.3, module version = 1.0.0
    [    16.478]     ABI class: X.Org Server Extension, version 6.0
    [    16.478] (II) Loading extension XFree86-DRI
    [    16.478] (II) LoadModule: "dri2"
    [    16.478] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    16.478] (II) Module dri2: vendor="X.Org Foundation"
    [    16.478]     compiled for 1.11.3, module version = 1.2.0
    [    16.478]     ABI class: X.Org Server Extension, version 6.0
    [    16.478] (II) Loading extension DRI2
    [    16.478] (==) Matched fglrx as autoconfigured driver 0
    [    16.478] (==) Matched ati as autoconfigured driver 1
    [    16.478] (==) Matched vesa as autoconfigured driver 2
    [    16.478] (==) Matched fbdev as autoconfigured driver 3
    [    16.478] (==) Assigned the driver to the xf86ConfigLayout
    [    16.478] (II) LoadModule: "fglrx"
    [    16.479] (WW) Warning, couldn't open module fglrx
    [    16.479] (II) UnloadModule: "fglrx"
    [    16.479] (II) Unloading fglrx
    [    16.479] (EE) Failed to load module "fglrx" (module does not exist, 0)
    [    16.479] (II) LoadModule: "ati"
    [    16.479] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [    16.479] (II) Module ati: vendor="X.Org Foundation"
    [    16.479]     compiled for 1.11.3, module version = 6.14.99
    [    16.479]     Module class: X.Org Video Driver
    [    16.479]     ABI class: X.Org Video Driver, version 11.0
    [    16.479] (II) LoadModule: "radeon"
    [    16.479] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [    16.479] (II) Module radeon: vendor="X.Org Foundation"
    [    16.479]     compiled for 1.11.3, module version = 6.14.99
    [    16.479]     Module class: X.Org Video Driver
    [    16.479]     ABI class: X.Org Video Driver, version 11.0
    [    16.479] (II) LoadModule: "vesa"
    [    16.480] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [    16.480] (II) Module vesa: vendor="X.Org Foundation"
    [    16.480]     compiled for 1.11.3, module version = 2.3.0
    [    16.480]     Module class: X.Org Video Driver
    [    16.480]     ABI class: X.Org Video Driver, version 11.0
    [    16.480] (II) LoadModule: "fbdev"
    [    16.480] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [    16.480] (II) Module fbdev: vendor="X.Org Foundation"
    [    16.480]     compiled for 1.11.3, module version = 0.4.2
    [    16.480]     ABI class: X.Org Video Driver, version 11.0
    [    16.480] (==) Matched fglrx as autoconfigured driver 0
    [    16.480] (==) Matched ati as autoconfigured driver 1
    [    16.480] (==) Matched vesa as autoconfigured driver 2
    [    16.480] (==) Matched fbdev as autoconfigured driver 3
    [    16.480] (==) Assigned the driver to the xf86ConfigLayout
    [    16.480] (II) LoadModule: "fglrx"
    [    16.481] (WW) Warning, couldn't open module fglrx
    [    16.481] (II) UnloadModule: "fglrx"
    [    16.481] (II) Unloading fglrx
    [    16.481] (EE) Failed to load module "fglrx" (module does not exist, 0)
    [    16.481] (II) LoadModule: "ati"
    [    16.481] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [    16.481] (II) Module ati: vendor="X.Org Foundation"
    [    16.481]     compiled for 1.11.3, module version = 6.14.99
    [    16.481]     Module class: X.Org Video Driver
    [    16.481]     ABI class: X.Org Video Driver, version 11.0
    [    16.481] (II) LoadModule: "vesa"
    [    16.481] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [    16.481] (II) Module vesa: vendor="X.Org Foundation"
    [    16.481]     compiled for 1.11.3, module version = 2.3.0
    [    16.481]     Module class: X.Org Video Driver
    [    16.481]     ABI class: X.Org Video Driver, version 11.0
    [    16.481] (II) UnloadModule: "vesa"
    [    16.481] (II) Unloading vesa
    [    16.481] (II) Failed to load module "vesa" (already loaded, 0)
    [    16.481] (II) LoadModule: "fbdev"
    [    16.481] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [    16.481] (II) Module fbdev: vendor="X.Org Foundation"
    [    16.481]     compiled for 1.11.3, module version = 0.4.2
    [    16.481]     ABI class: X.Org Video Driver, version 11.0
    [    16.481] (II) UnloadModule: "fbdev"
    [    16.481] (II) Unloading fbdev
    [    16.481] (II) Failed to load module "fbdev" (already loaded, 0)
    [    16.481] (II) RADEON: Driver for ATI Radeon chipsets:
        ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
        ATI Radeon Mobility X300 (M24) 3152 (PCIE),
        ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
        ATI Radeon X600 (RV380) 3E50 (PCIE),
        ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
        ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
        ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
        ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
        ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
        ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
        ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
        ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
        ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
        ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
        ATI Radeon IGP330M/340M/350M (U2) 4337,
        ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
        ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
        ATI Radeon X800PRO (R420) JI (AGP),
        ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
        ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
        ATI Radeon Mobility 9800 (M18) JN (AGP),
        ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
        ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
        ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
        ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
        ATI Radeon Mobility M7 LW (AGP),
        ATI Mobility FireGL 7800 M7 LX (AGP),
        ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
        ATI FireGL Mobility 9000 (M9) Ld (AGP),
        ATI Radeon Mobility 9000 (M9) Lf (AGP),
        ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
        ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
        ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
        ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
        ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
        ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
        ATI Radeon Mobility 9600 (M10) NQ (AGP),
        ATI Radeon Mobility 9600 (M11) NR (AGP),
        ATI Radeon Mobility 9600 (M10) NS (AGP),
        ATI FireGL Mobility T2 (M10) NT (AGP),
        ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
        ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
        ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
        ATI Radeon Mobility X300 (M22) 5460 (PCIE),
        ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
        ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
        ATI Radeon X800PRO (R423) UI (PCIE),
        ATI Radeon X800LE (R423) UJ (PCIE),
        ATI Radeon X800SE (R423) UK (PCIE),
        ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
        ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
        ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
        ATI FireGL unknown (R423) UR (PCIE),
        ATI FireGL unknown (R423) UT (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility Radeon X700 XL (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
        ATI Radeon Mobility 9100 IGP (U3) 5835,
        ATI Radeon XPRESS 200 5954 (PCIE),
        ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
        ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
        ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
        ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
        ATI Radeon XPRESS 200M 5975 (PCIE),
        ATI Radeon XPRESS 200 5A41 (PCIE),
        ATI Radeon XPRESS 200M 5A42 (PCIE),
        ATI Radeon XPRESS 200 5A61 (PCIE),
        ATI Radeon XPRESS 200M 5A62 (PCIE),
        ATI Radeon X300 (RV370) 5B60 (PCIE),
        ATI Radeon X600 (RV370) 5B62 (PCIE),
        ATI Radeon X550 (RV370) 5B63 (PCIE),
        ATI FireGL V3100 (RV370) 5B64 (PCIE),
        ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
        ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
        ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
        ATI Mobility Radeon X800 XT (M28) (PCIE),
        ATI Mobility FireGL V5100 (M28) (PCIE),
        ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
        ATI Radeon X850 XT PE (R480) (PCIE),
        ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
        ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
        ATI Radeon X850 XT (R480) (PCIE),
        ATI Radeon X800XT (R423) 5D57 (PCIE),
        ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
        ATI Radeon X700 PRO (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
        ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
        ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
        ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
        ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
        ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
        ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
        ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
        ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
        ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
        ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
        ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
        ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
        ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
        ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
        ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
        ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
        ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
        ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
        ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
        ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
        ATI Mobility Radeon X1700, ATI Radeon X2300HD,
        ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
        ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
        ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
        ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
        ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
        ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
        ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
        ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
        ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
        ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
        ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
        ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
        ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
        ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
        ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
        ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
        AMD FireStream 9250, ATI FirePro V8700 (FireGL),
        ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
        ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
        ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
        ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
        ATI Mobility Radeon HD 4670, ATI FirePro M5750,
        ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
        ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
        ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
        ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
        ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
        ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
        ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
        ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
        ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
        ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
        ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
        ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
        ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
        ATI Mobility Radeon HD 3850 X2, ATI RV670,
        ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
        ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
        ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
        ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
        ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
        ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
        ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
        ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
        ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
        ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
        ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
        ATI FireGL V3600, ATI Radeon HD 2600 LE,
        ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
        ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
        ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
        ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
        ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
        ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
        ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
        ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
        ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
        ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
        SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
        ATI Radeon 4100, ATI Mobility Radeon HD 4200,
        ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
        AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
        AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
        AMD Radeon HD 6300 Series Graphics,
        AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
        AMD Firestream 9350, ATI Radeon HD 5800 Series,
        ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
        ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
        ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
        ATI Mobility Radeon HD 5800 Series,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
        ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
        ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
        ATI Mobility Radeon HD 5000 Series,
        ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
        ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
        ATI Mobility Radeon HD 5000 Series,
        ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
        ATI Mobility Radeon Graphics, CEDAR,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
        ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
        CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
        AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
        CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
        BARTS, BARTS, Mobility Radeon HD 6000 Series,
        Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
        AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
        AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
        TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
        TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
        CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
        CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS
    [    16.485] (II) VESA: driver for VESA chipsets: vesa
    [    16.485] (II) FBDEV: driver for framebuffer: fbdev
    [    16.485] (++) using VT number 7
    
    [    16.485] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [    16.485] (II) [KMS] Kernel modesetting enabled.
    [    16.485] (WW) Falling back to old probe method for vesa
    [    16.485] (WW) Falling back to old probe method for fbdev
    [    16.485] (II) Loading sub module "fbdevhw"
    [    16.485] (II) LoadModule: "fbdevhw"
    [    16.486] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [    16.486] (II) Module fbdevhw: vendor="X.Org Foundation"
    [    16.486]     compiled for 1.11.3, module version = 0.0.2
    [    16.486]     ABI class: X.Org Video Driver, version 11.0
    [    16.486] (II) RADEON(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
    [    16.486] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [    16.486] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [    16.486] (==) RADEON(0): Default visual is TrueColor
    [    16.486] (==) RADEON(0): RGB weight 888
    [    16.486] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [    16.486] (--) RADEON(0): Chipset: "ATI Radeon HD 4350" (ChipID = 0x954f)
    [    16.486] (II) RADEON(0): PCIE card detected
    [    16.486] drmOpenDevice: node name is /dev/dri/card0
    [    16.486] drmOpenDevice: open result is 9, (OK)
    [    16.486] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [    16.486] drmOpenDevice: node name is /dev/dri/card0
    [    16.486] drmOpenDevice: open result is 9, (OK)
    [    16.486] drmOpenByBusid: drmOpenMinor returns 9
    [    16.486] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [    16.486] (II) Loading sub module "exa"
    [    16.486] (II) LoadModule: "exa"
    [    16.486] (II) Loading /usr/lib/xorg/modules/libexa.so
    [    16.486] (II) Module exa: vendor="X.Org Foundation"
    [    16.486]     compiled for 1.11.3, module version = 2.5.0
    [    16.486]     ABI class: X.Org Video Driver, version 11.0
    [    16.486] (II) RADEON(0): KMS Color Tiling: enabled
    [    16.486] (II) RADEON(0): KMS Pageflipping: enabled
    [    16.486] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [    16.512] (II) RADEON(0): Output VGA-0 has no monitor section
    [    16.516] (II) RADEON(0): Output HDMI-0 has no monitor section
    [    16.572] (II) RADEON(0): Output DVI-0 has no monitor section
    [    16.596] (II) RADEON(0): EDID for output VGA-0
    [    16.600] (II) RADEON(0): EDID for output HDMI-0
    [    16.656] (II) RADEON(0): EDID for output DVI-0
    [    16.656] (II) RADEON(0): Manufacturer: DEL  Model: a00a  Serial#: 1111576887
    [    16.656] (II) RADEON(0): Year: 2004  Week: 2
    [    16.656] (II) RADEON(0): EDID Version: 1.3
    [    16.656] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
    [    16.656] (II) RADEON(0): Sync:  Separate
    [    16.656] (II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
    [    16.656] (II) RADEON(0): Gamma: 2.20
    [    16.656] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [    16.656] (II) RADEON(0): First detailed timing is preferred mode
    [    16.656] (II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.610
    [    16.656] (II) RADEON(0): blueX: 0.140 blueY: 0.070   whiteX: 0.310 whiteY: 0.330
    [    16.656] (II) RADEON(0): Supported established timings:
    [    16.656] (II) RADEON(0): 720x400@70Hz
    [    16.656] (II) RADEON(0): 640x480@60Hz
    [    16.656] (II) RADEON(0): 640x480@75Hz
    [    16.656] (II) RADEON(0): 800x600@60Hz
    [    16.656] (II) RADEON(0): 800x600@75Hz
    [    16.656] (II) RADEON(0): 1024x768@60Hz
    [    16.656] (II) RADEON(0): 1024x768@75Hz
    [    16.656] (II) RADEON(0): 1280x1024@75Hz
    [    16.656] (II) RADEON(0): Manufacturer's mask: 0
    [    16.656] (II) RADEON(0): Supported standard timings:
    [    16.656] (II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
    [    16.656] (II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
    [    16.656] (II) RADEON(0): Supported detailed timing:
    [    16.656] (II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
    [    16.656] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
    [    16.656] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
    [    16.656] (II) RADEON(0): Serial No: P144641ABAQ7
    [    16.656] (II) RADEON(0): Monitor name: DELL E172FP
    [    16.656] (II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
    [    16.656] (II) RADEON(0): EDID (in hex):
    [    16.656] (II) RADEON(0):     00ffffffffffff0010ac0aa037514142
    [    16.657] (II) RADEON(0):     020e010368221b78eac5c6a3574a9c23
    [    16.657] (II) RADEON(0):     124f54a54b00714f8180010101010101
    [    16.657] (II) RADEON(0):     010101010101302a009851002a403070
    [    16.657] (II) RADEON(0):     1300520e1100001e000000ff00503134
    [    16.657] (II) RADEON(0):     3436343141424151370a000000fc0044
    [    16.657] (II) RADEON(0):     454c4c204531373246500a20000000fd
    [    16.657] (II) RADEON(0):     00384c1f500e000a202020202020000e
    [    16.657] (II) RADEON(0): Printing probed modes for output DVI-0
    [    16.657] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    16.657] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    16.657] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    16.657] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
    [    16.657] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    16.657] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    [    16.657] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    16.657] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    16.657] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    16.657] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    16.657] (II) RADEON(0): Output VGA-0 disconnected
    [    16.657] (II) RADEON(0): Output HDMI-0 disconnected
    [    16.657] (II) RADEON(0): Output DVI-0 connected
    [    16.657] (II) RADEON(0): Using exact sizes for initial modes
    [    16.657] (II) RADEON(0): Output DVI-0 using initial mode 1280x1024
    [    16.657] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [    16.657] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fac0000
    [    16.657] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [    16.657] (==) RADEON(0): DPI set to (96, 96)
    [    16.657] (II) Loading sub module "fb"
    [    16.657] (II) LoadModule: "fb"
    [    16.657] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    16.657] (II) Module fb: vendor="X.Org Foundation"
    [    16.657]     compiled for 1.11.3, module version = 1.0.0
    [    16.657]     ABI class: X.Org ANSI C Emulation, version 0.4
    [    16.657] (II) Loading sub module "ramdac"
    [    16.657] (II) LoadModule: "ramdac"
    [    16.657] (II) Module "ramdac" already built-in
    [    16.657] (II) UnloadModule: "vesa"
    [    16.657] (II) Unloading vesa
    [    16.657] (II) UnloadModule: "fbdev"
    [    16.657] (II) Unloading fbdev
    [    16.657] (II) UnloadModule: "fbdevhw"
    [    16.657] (II) Unloading fbdevhw
    [    16.657] (--) Depth 24 pixmap format is 32 bpp
    [    16.657] (II) RADEON(0): [DRI2] Setup complete
    [    16.657] (II) RADEON(0): [DRI2]   DRI driver: r600
    [    16.657] (II) RADEON(0): [DRI2]   VDPAU driver: r600
    [    16.658] (II) RADEON(0): Front buffer size: 5120K
    [    16.658] (II) RADEON(0): VRAM usage limit set to 226483K
    [    16.658] (==) RADEON(0): Backing store disabled
    [    16.658] (II) RADEON(0): Direct rendering enabled
    [    16.658] (II) RADEON(0): Setting EXA maxPitchBytes
    [    16.658] (II) EXA(0): Driver allocated offscreen pixmaps
    [    16.658] (II) EXA(0): Driver registered support for the following operations:
    [    16.658] (II)         Solid
    [    16.658] (II)         Copy
    [    16.658] (II)         Composite (RENDER acceleration)
    [    16.658] (II)         UploadToScreen
    [    16.658] (II)         DownloadFromScreen
    [    16.658] (II) RADEON(0): Acceleration enabled
    [    16.658] (==) RADEON(0): DPMS enabled
    [    16.658] (==) RADEON(0): Silken mouse enabled
    [    16.658] (II) RADEON(0): Set up textured video
    [    16.658] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [    16.658] (II) RADEON(0): [XvMC] Extension initialized.
    [    16.658] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [    16.658] (--) RandR disabled
    [    16.658] (II) Initializing built-in extension Generic Event Extension
    [    16.658] (II) Initializing built-in extension SHAPE
    [    16.658] (II) Initializing built-in extension MIT-SHM
    [    16.658] (II) Initializing built-in extension XInputExtension
    [    16.658] (II) Initializing built-in extension XTEST
    [    16.658] (II) Initializing built-in extension BIG-REQUESTS
    [    16.658] (II) Initializing built-in extension SYNC
    [    16.658] (II) Initializing built-in extension XKEYBOARD
    [    16.658] (II) Initializing built-in extension XC-MISC
    [    16.658] (II) Initializing built-in extension SECURITY
    [    16.658] (II) Initializing built-in extension XINERAMA
    [    16.658] (II) Initializing built-in extension XFIXES
    [    16.658] (II) Initializing built-in extension RENDER
    [    16.658] (II) Initializing built-in extension RANDR
    [    16.658] (II) Initializing built-in extension COMPOSITE
    [    16.658] (II) Initializing built-in extension DAMAGE
    [    16.677] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [    16.677] (II) AIGLX: enabled GLX_INTEL_swap_event
    [    16.677] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [    16.677] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [    16.678] (II) AIGLX: Loaded and initialized r600
    [    16.678] (II) GLX: Initialized DRI2 GL provider for screen 0
    [    16.678] (II) RADEON(0): Setting screen physical size to 338 x 270
    [    16.686] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
    [    16.689] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [    16.689] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    16.689] (II) LoadModule: "evdev"
    [    16.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    16.690] (II) Module evdev: vendor="X.Org Foundation"
    [    16.690]     compiled for 1.11.3, module version = 2.7.0
    [    16.690]     Module class: X.Org XInput Driver
    [    16.690]     ABI class: X.Org XInput driver, version 16.0
    [    16.690] (II) Using input driver 'evdev' for 'Power Button'
    [    16.690] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    16.690] (**) Power Button: always reports core events
    [    16.690] (**) evdev: Power Button: Device: "/dev/input/event1"
    [    16.690] (--) evdev: Power Button: Vendor 0 Product 0x1
    [    16.690] (--) evdev: Power Button: Found keys
    [    16.690] (II) evdev: Power Button: Configuring as keyboard
    [    16.690] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [    16.690] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [    16.690] (**) Option "xkb_rules" "evdev"
    [    16.690] (**) Option "xkb_model" "pc105"
    [    16.690] (**) Option "xkb_layout" "es"
    [    16.692] (II) XKB: reuse xkmfile /var/lib/xkb/server-FFBD4FDC8093CCB415CD73029FDA64F4B077A3E7.xkm
    [    16.693] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [    16.693] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    16.693] (II) Using input driver 'evdev' for 'Power Button'
    [    16.693] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    16.693] (**) Power Button: always reports core events
    [    16.693] (**) evdev: Power Button: Device: "/dev/input/event0"
    [    16.693] (--) evdev: Power Button: Vendor 0 Product 0x1
    [    16.693] (--) evdev: Power Button: Found keys
    [    16.693] (II) evdev: Power Button: Configuring as keyboard
    [    16.693] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [    16.693] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [    16.693] (**) Option "xkb_rules" "evdev"
    [    16.693] (**) Option "xkb_model" "pc105"
    [    16.693] (**) Option "xkb_layout" "es"
    [    16.694] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
    [    16.694] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [    16.694] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [    16.694] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    16.694] (**) Logitech USB Receiver: always reports core events
    [    16.694] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
    [    16.694] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51b
    [    16.694] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
    [    16.694] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [    16.694] (--) evdev: Logitech USB Receiver: Found relative axes
    [    16.694] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [    16.694] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [    16.694] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [    16.694] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [    16.694] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    16.694] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3/event3"
    [    16.694] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
    [    16.694] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [    16.694] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [    16.694] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [    16.694] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [    16.694] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [    16.695] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [    16.695] (II) No input driver specified, ignoring this device.
    [    16.695] (II) This device may have been added with another device file.
    [    16.695] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
    [    16.695] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [    16.695] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [    16.695] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    16.695] (**) AT Translated Set 2 keyboard: always reports core events
    [    16.695] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
    [    16.695] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [    16.695] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [    16.695] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [    16.695] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
    [    16.695] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [    16.695] (**) Option "xkb_rules" "evdev"
    [    16.695] (**) Option "xkb_model" "pc105"
    [    16.695] (**) Option "xkb_layout" "es"
    [    17.396] (II) RADEON(0): EDID vendor "DEL", prod id 40970
    [    17.396] (II) RADEON(0): Using EDID range info for horizontal sync
    [    17.396] (II) RADEON(0): Using EDID range info for vertical refresh
    [    17.396] (II) RADEON(0): Printing DDC gathered Modelines:
    [    17.396] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    17.396] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    17.396] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    17.396] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    17.396] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    17.396] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    17.396] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
    [    17.396] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    17.396] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    [    17.396] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    18.088] (II) RADEON(0): EDID vendor "DEL", prod id 40970
    [    18.088] (II) RADEON(0): Using hsync ranges from config file
    [    18.088] (II) RADEON(0): Using vrefresh ranges from config file
    [    18.088] (II) RADEON(0): Printing DDC gathered Modelines:
    [    18.088] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    18.088] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    18.088] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    18.088] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    18.088] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    18.088] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    18.088] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
    [    18.088] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    18.088] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    [    18.088] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    18.460] (II) RADEON(0): EDID vendor "DEL", prod id 40970
    [    18.460] (II) RADEON(0): Using hsync ranges from config file
    [    18.460] (II) RADEON(0): Using vrefresh ranges from config file
    [    18.460] (II) RADEON(0): Printing DDC gathered Modelines:
    [    18.460] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    18.460] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    18.460] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    18.460] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    18.460] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    18.460] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    18.460] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
    [    18.460] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    18.460] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    [    18.460] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    19.037] (II) XKB: reuse xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm
    [    20.588] (II) config/udev: Adding input device HDA Intel Line-Out Surround (/dev/input/event9)
    [    20.588] (II) No input driver specified, ignoring this device.
    [    20.588] (II) This device may have been added with another device file.
    [    20.591] (II) config/udev: Adding input device HDA Intel Line-Out CLFE (/dev/input/event8)
    [    20.591] (II) No input driver specified, ignoring this device.
    [    20.591] (II) This device may have been added with another device file.
    [    20.593] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event6)
    [    20.593] (II) No input driver specified, ignoring this device.
    [    20.593] (II) This device may have been added with another device file.
    [    20.594] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7)
    [    20.594] (II) No input driver specified, ignoring this device.
    [    20.594] (II) This device may have been added with another device file.
    [    20.597] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event4)
    [    20.597] (II) No input driver specified, ignoring this device.
    [    20.597] (II) This device may have been added with another device file.
    [    20.597] (II) config/udev: Adding input device HDA Intel Line-Out Front (/dev/input/event10)
    [    20.597] (II) No input driver specified, ignoring this device.
    [    20.597] (II) This device may have been added with another device file.
    [    20.598] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event5)
    [    20.598] (II) No input driver specified, ignoring this device.
    [    20.598] (II) This device may have been added with another device file.
    [    20.611] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event11)
    [    20.611] (II) No input driver specified, ignoring this device.
    [    20.611] (II) This device may have been added with another device file.
    [    21.200] (II) RADEON(0): EDID vendor "DEL", prod id 40970
    [    21.200] (II) RADEON(0): Using hsync ranges from config file
    [    21.200] (II) RADEON(0): Using vrefresh ranges from config file
    [    21.200] (II) RADEON(0): Printing DDC gathered Modelines:
    [    21.200] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    21.200] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    21.200] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    21.200] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    21.200] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    21.200] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    21.200] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
    [    21.200] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    21.200] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    [    21.200] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [    38.016] (II) RADEON(0): EDID vendor "DEL", prod id 40970
    [    38.016] (II) RADEON(0): Using hsync ranges from config file
    [    38.016] (II) RADEON(0): Using vrefresh ranges from config file
    [    38.016] (II) RADEON(0): Printing DDC gathered Modelines:
    [    38.016] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [    38.016] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [    38.016] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    38.016] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    38.016] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [    38.016] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [    38.016] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
    [    38.016] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    38.016] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    [    38.016] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [   619.388] (II) RADEON(0): EDID vendor "DEL", prod id 40970
    [   619.388] (II) RADEON(0): Using hsync ranges from config file
    [   619.388] (II) RADEON(0): Using vrefresh ranges from config file
    [   619.388] (II) RADEON(0): Printing DDC gathered Modelines:
    [   619.388] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [   619.388] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [   619.388] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [   619.388] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [   619.388] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [   619.388] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [   619.388] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
    [   619.388] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [   619.388] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    [   619.388] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [  2576.556] (II) RADEON(0): EDID vendor "DEL", prod id 40970
    [  2576.556] (II) RADEON(0): Using hsync ranges from config file
    [  2576.556] (II) RADEON(0): Using vrefresh ranges from config file
    [  2576.556] (II) RADEON(0): Printing DDC gathered Modelines:
    [  2576.556] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [  2576.556] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [  2576.556] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [  2576.556] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [  2576.556] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [  2576.556] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [  2576.556] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
    [  2576.556] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [  2576.556] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    [  2576.556] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 11601.736] (II) evdev: Power Button: Close
    [ 11601.736] (II) UnloadModule: "evdev"
    [ 11601.736] (II) Unloading evdev
    [ 11601.784] (II) evdev: Power Button: Close
    [ 11601.784] (II) UnloadModule: "evdev"
    [ 11601.784] (II) Unloading evdev
    [ 11601.828] (II) evdev: Logitech USB Receiver: Close
    [ 11601.828] (II) UnloadModule: "evdev"
    [ 11601.828] (II) Unloading evdev
    [ 11601.888] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 11601.888] (II) UnloadModule: "evdev"
    [ 11601.888] (II) Unloading evdev
    [ 11601.894]  ddxSigGiveUp: Closing log
    [ 11601.894] Server terminated successfully (0). Closing log file.

  7. #7
    Join Date
    Feb 2012
    Location
    el_GR
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: Ubuntu crashes: "Could not write byte: broken pipe"

    Hi ,
    OK, I think dmesgs are clear. This is good news.

    I found some similar and multiple WW(warnings)- EE(errors) in Xorg.txt
    Code:
    [    16.479] (WW) Warning, couldn't open module fglrx
    [    16.481] (WW) Warning, couldn't open module fglrx
    [    16.481] (EE) Failed to load module "fglrx" (module does not exist, 0)
    This log is from
    Code:
    [    16.373] Build Date: 29 August 2012  12:10:05AM
    I don't know if a crash made then , but if you face this situation again take a look at your graphics driver.
    I don't want to say that is for sure , but is possible an error with the driver broke the system.

    Now it seems OK.

    Thanks
    # How to mark the Thread as [SOLVED] when done.
    # Ubuntu Greek Community
    # Gain 20GB of space on copy.com when sign up with my referral link.

  8. #8
    Join Date
    May 2009
    Beans
    63

    Re: Ubuntu crashes: "Could not write byte: broken pipe"

    Thanks again!
    We'll consider the issue as solve then, for now.

  9. #9
    Join Date
    Sep 2008
    Location
    Canada
    Beans
    47
    Distro
    Ubuntu Development Release

    Re: Ubuntu crashes: "Could not write byte: broken pipe"

    Get rid of all your fglrx and nvidia files except nvidia-common. Worked for me, and they aren't installed at all in 12.10.

  10. #10
    Join Date
    May 2009
    Beans
    63

    Re: Ubuntu crashes: "Could not write byte: broken pipe"

    Hi NikTh and everybody,

    I got the 'broken pipe' crach again. Here is the dmes log:

    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.2.0-31-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50-Ubuntu SMP Fri Sep 7 16:39:45 UTC 2012 (Ubuntu 3.2.0-31.50-generic-pae 3.2.28)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
    [    0.000000]  BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01100 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed02000 - 00000000fed14c00 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI present.
    [    0.000000] DMI: Acer Aspire X3810/WG43M, BIOS P01-A3 05/26/2009
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x1000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-DFFFF uncachable
    [    0.000000]   E0000-EFFFF write-through
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 1C0000000 mask FC0000000 uncachable
    [    0.000000]   1 base 000000000 mask E00000000 write-back
    [    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] original variable MTRRs
    [    0.000000] reg 0, base: 7GB, range: 1GB, type UC
    [    0.000000] reg 1, base: 0GB, range: 8GB, type WB
    [    0.000000] reg 2, base: 3GB, range: 1GB, type UC
    [    0.000000] total RAM covered: 6144M
    [    0.000000] Found optimal setting for mtrr clean up
    [    0.000000]  gran_size: 64K     chunk_size: 64K     num_reg: 4      lose cover RAM: 0G
    [    0.000000] New variable MTRRs
    [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
    [    0.000000] reg 2, base: 4GB, range: 2GB, type WB
    [    0.000000] reg 3, base: 6GB, range: 1GB, type WB
    [    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] found SMP MP-table at [c00ff780] ff780
    [    0.000000] initial memory mapped : 0 - 02000000
    [    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
    [    0.000000]  0000000000 - 0000200000 page 4k
    [    0.000000]  0000200000 - 0037a00000 page 2M
    [    0.000000]  0037a00000 - 0037bfe000 page 4k
    [    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
    [    0.000000] RAMDISK: 364ee000 - 3726f000
    [    0.000000] ACPI: RSDP 000fa770 00024 (v02 ACPIAM)
    [    0.000000] ACPI: XSDT bff90100 0006C (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: FACP bff90290 000F4 (v04 052609 FACP2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: DSDT bff905c0 061D5 (v02   P01-   P01-A3 000000A3 INTL 20051117)
    [    0.000000] ACPI: FACS bff9e000 00040
    [    0.000000] ACPI: APIC bff90390 0006C (v02 052609 APIC2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: MCFG bff90400 0003C (v01 052609 OEMMCFG  20090526 MSFT 00000097)
    [    0.000000] ACPI: SLIC bff90440 00176 (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: OEMB bff9e040 00072 (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: HPET bff9a5c0 00038 (v01 052609 OEMHPET  20090526 MSFT 00000097)
    [    0.000000] ACPI: GSCI bff9e0c0 02024 (v01 052609 GMCHSCI  20090526 MSFT 00000097)
    [    0.000000] ACPI: AWMI bffa00f0 0004E (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: SSDT bffa0940 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 6276MB HIGHMEM available.
    [    0.000000] 891MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 37bfe000
    [    0.000000]   low ram: 0 - 37bfe000
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x00037bfe
    [    0.000000]   HighMem  0x00037bfe -> 0x001c0000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009e
    [    0.000000]     0: 0x00000100 -> 0x000bff90
    [    0.000000]     0: 0x00100000 -> 0x001c0000
    [    0.000000] On node 0 totalpages: 1572638
    [    0.000000] free_area_init_node: node 0, pgdat c1868a80, node_mem_map f2cee200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3950 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1752 pages used for memmap
    [    0.000000]   Normal zone: 222502 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 12553 pages used for memmap
    [    0.000000]   HighMem zone: 1331849 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34240 r0 d23104 u57344
    [    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1558301
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic-pae root=UUID=3169b696-02b9-4593-b5f7-30c72e816dc7 ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 29359872 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00037bfe:001c0000)
    [    0.000000] Memory: 6179240k/7340032k available (5818k kernel code, 111312k reserved, 2846k data, 740k init, 5377608k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    [    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    [    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
    [    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
    [    0.000000]       .data : 0xc15ae8bc - 0xc1876280   (2846 kB)
    [    0.000000]       .text : 0xc1000000 - 0xc15ae8bc   (5818 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:2304 nr_irqs:712 16
    [    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2327.650 MHz processor.
    [    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.30 BogoMIPS (lpj=9310600)
    [    0.004006] pid_max: default: 32768 minimum: 301
    [    0.004026] Security Framework initialized
    [    0.004042] AppArmor: AppArmor initialized
    [    0.004043] Yama: becoming mindful.
    [    0.004094] Mount-cache hash table entries: 512
    [    0.004217] Initializing cgroup subsys cpuacct
    [    0.004223] Initializing cgroup subsys memory
    [    0.004230] Initializing cgroup subsys devices
    [    0.004232] Initializing cgroup subsys freezer
    [    0.004234] Initializing cgroup subsys blkio
    [    0.004240] Initializing cgroup subsys perf_event
    [    0.004265] CPU: Physical Processor ID: 0
    [    0.004266] CPU: Processor Core ID: 0
    [    0.004269] mce: CPU supports 6 MCE banks
    [    0.004277] CPU0: Thermal monitoring enabled (TM2)
    [    0.004280] using mwait in idle threads.
    [    0.009714] ACPI: Core revision 20110623
    [    0.016011] ftrace: allocating 26555 entries in 52 pages
    [    0.024042] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.024389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.066480] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
    [    0.068003] APIC calibration not consistent with PM-Timer: 139ms instead of 100ms
    [    0.068003] APIC delta adjusted to PM-Timer: 2078348 (2909656)
    [    0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [    0.068003] ... version:                2
    [    0.068003] ... bit width:              40
    [    0.068003] ... generic registers:      2
    [    0.068003] ... value mask:             000000ffffffffff
    [    0.068003] ... max period:             000000007fffffff
    [    0.068003] ... fixed-purpose events:   3
    [    0.068003] ... event mask:             0000000700000003
    [    0.068003] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.068003] CPU 1 irqstacks, hard=f7512000 soft=f7514000
    [    0.068003] Booting Node   0, Processors  #1
    [    0.068003] smpboot cpu 1: start_ip = 9a000
    [    0.008000] Initializing CPU#1
    [    0.156032] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.156123] CPU 2 irqstacks, hard=f7520000 soft=f7522000
    [    0.156125]  #2
    [    0.156127] smpboot cpu 2: start_ip = 9a000
    [    0.008000] Initializing CPU#2
    [    0.248031] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.248117] CPU 3 irqstacks, hard=f752e000 soft=f7538000
    [    0.248119]  #3 Ok.
    [    0.248120] smpboot cpu 3: start_ip = 9a000
    [    0.008000] Initializing CPU#3
    [    0.340037] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.340060] Brought up 4 CPUs
    [    0.340063] Total of 4 processors activated (18662.90 BogoMIPS).
    [    0.343004] devtmpfs: initialized
    [    0.343004] EVM: security.selinux
    [    0.343004] EVM: security.SMACK64
    [    0.343004] EVM: security.capability
    [    0.343004] PM: Registering ACPI NVS region at bff9e000 (270336 bytes)
    [    0.344576] print_constraints: dummy: 
    [    0.344603] RTC time: 18:58:08, date: 10/09/12
    [    0.344640] NET: Registered protocol family 16
    [    0.344649] Trying to unpack rootfs image as initramfs...
    [    0.344771] EISA bus registered
    [    0.344798] ACPI: bus type pci registered
    [    0.344860] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.344863] PCI: not using MMCONFIG
    [    0.344936] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
    [    0.344996] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    [    0.344998] PCI: Using configuration type 1 for base access
    [    0.346082] bio: create slab <bio-0> at 0
    [    0.346082] ACPI: Added _OSI(Module Device)
    [    0.346082] ACPI: Added _OSI(Processor Device)
    [    0.346082] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.346082] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.346082] ACPI: EC: Look up EC in DSDT
    [    0.348956] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.351650] ACPI: SSDT bffa0140 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.351961] ACPI: Dynamic OEM Table Load:
    [    0.351964] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.352255] ACPI: SSDT bffa0340 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.352564] ACPI: Dynamic OEM Table Load:
    [    0.352567] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.352843] ACPI: SSDT bffa0540 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.353154] ACPI: Dynamic OEM Table Load:
    [    0.353157] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.353426] ACPI: SSDT bffa0740 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.353739] ACPI: Dynamic OEM Table Load:
    [    0.353742] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.353929] ACPI: Interpreter enabled
    [    0.353935] ACPI: (supports S0 S3 S4 S5)
    [    0.353954] ACPI: Using IOAPIC for interrupt routing
    [    0.353979] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.355173] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [    0.355175] PCI: Using MMCONFIG for extended config space
    [    0.360654] ACPI: No dock devices found.
    [    0.360658] HEST: Table not found.
    [    0.360662] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.360746] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.360924] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
    [    0.360926] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
    [    0.360929] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.360931] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [    0.360934] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [    0.360936] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
    [    0.360949] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [    0.360991] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [    0.361030] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [    0.361034] pci 0000:00:01.0: PME# disabled
    [    0.361072] pci 0000:00:19.0: [8086:10ce] type 0 class 0x000200
    [    0.361089] pci 0000:00:19.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
    [    0.361097] pci 0000:00:19.0: reg 14: [mem 0xfe9de000-0xfe9defff]
    [    0.361106] pci 0000:00:19.0: reg 18: [io  0xcc00-0xcc1f]
    [    0.361165] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [    0.361168] pci 0000:00:19.0: PME# disabled
    [    0.361186] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [    0.361226] pci 0000:00:1a.0: reg 20: [io  0xc880-0xc89f]
    [    0.361275] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [    0.361315] pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
    [    0.361363] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [    0.361403] pci 0000:00:1a.2: reg 20: [io  0xc480-0xc49f]
    [    0.361459] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [    0.361479] pci 0000:00:1a.7: reg 10: [mem 0xfe9dc000-0xfe9dc3ff]
    [    0.361565] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [    0.361569] pci 0000:00:1a.7: PME# disabled
    [    0.361592] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [    0.361606] pci 0000:00:1b.0: reg 10: [mem 0xfe9d8000-0xfe9dbfff 64bit]
    [    0.361669] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.361672] pci 0000:00:1b.0: PME# disabled
    [    0.361691] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [    0.361756] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.361760] pci 0000:00:1c.0: PME# disabled
    [    0.361785] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [    0.361826] pci 0000:00:1d.0: reg 20: [io  0xc400-0xc41f]
    [    0.361876] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [    0.361916] pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
    [    0.361965] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [    0.362004] pci 0000:00:1d.2: reg 20: [io  0xc000-0xc01f]
    [    0.362060] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [    0.362080] pci 0000:00:1d.7: reg 10: [mem 0xfe9d6000-0xfe9d63ff]
    [    0.362167] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.362171] pci 0000:00:1d.7: PME# disabled
    [    0.362191] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [    0.362249] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
    [    0.362361] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
    [    0.362379] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
    [    0.362386] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
    [    0.362394] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
    [    0.362401] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
    [    0.362409] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb41f]
    [    0.362417] pci 0000:00:1f.2: reg 24: [mem 0xfe9d4000-0xfe9d47ff]
    [    0.362462] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.362465] pci 0000:00:1f.2: PME# disabled
    [    0.362481] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [    0.362495] pci 0000:00:1f.3: reg 10: [mem 0xfe9d3c00-0xfe9d3cff 64bit]
    [    0.362515] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
    [    0.362571] pci 0000:01:00.0: [1002:954f] type 0 class 0x000300
    [    0.362585] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.362595] pci 0000:01:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff 64bit]
    [    0.362603] pci 0000:01:00.0: reg 20: [io  0xd000-0xd0ff]
    [    0.362615] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
    [    0.362646] pci 0000:01:00.0: supports D1 D2
    [    0.362665] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
    [    0.362678] pci 0000:01:00.1: reg 10: [mem 0xfeaec000-0xfeaeffff 64bit]
    [    0.362737] pci 0000:01:00.1: supports D1 D2
    [    0.362766] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.362769] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.362773] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.362777] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.362832] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
    [    0.362854] pci 0000:02:00.0: reg 10: [mem 0xfebff800-0xfebfffff 64bit]
    [    0.362866] pci 0000:02:00.0: reg 18: [io  0xe800-0xe8ff]
    [    0.362959] pci 0000:02:00.0: supports D2
    [    0.362961] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
    [    0.362965] pci 0000:02:00.0: PME# disabled
    [    0.368041] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.368045] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.368049] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.368113] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [    0.368122] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.368125] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.368127] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.368130] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [    0.368132] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [    0.368135] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
    [    0.368157] pci_bus 0000:00: on NUMA node 0
    [    0.368161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.368376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [    0.368427]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.368431]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.368432] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.377225] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
    [    0.377274] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
    [    0.377317] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
    [    0.377364] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
    [    0.377410] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15)
    [    0.377456] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
    [    0.377503] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
    [    0.377549] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
    [    0.377661] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.377661] vgaarb: loaded
    [    0.377661] vgaarb: bridge control possible 0000:01:00.0
    [    0.377661] i2c-core: driver [aat2870] using legacy suspend method
    [    0.377661] i2c-core: driver [aat2870] using legacy resume method
    [    0.377661] SCSI subsystem initialized
    [    0.377661] libata version 3.00 loaded.
    [    0.377661] usbcore: registered new interface driver usbfs
    [    0.377661] usbcore: registered new interface driver hub
    [    0.377661] usbcore: registered new device driver usb
    [    0.377661] PCI: Using ACPI for IRQ routing
    [    0.377661] PCI: pci_cache_line_size set to 64 bytes
    [    0.377661] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
    [    0.377661] reserve RAM buffer: 00000000bff90000 - 00000000bfffffff 
    [    0.377661] NetLabel: Initializing
    [    0.377661] NetLabel:  domain hash size = 128
    [    0.377661] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.377661] NetLabel:  unlabeled traffic allowed by default
    [    0.377661] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [    0.377661] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [    0.377661] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [    0.392155] Switching to clocksource hpet
    [    0.400285] AppArmor: AppArmor Filesystem Enabled
    [    0.400313] pnp: PnP ACPI init
    [    0.400331] ACPI: bus type pnp registered
    [    0.400447] pnp 00:00: [bus 00-ff]
    [    0.400450] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.400453] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.400455] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.400457] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.400460] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [    0.400462] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [    0.400464] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
    [    0.400520] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.400530] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [    0.400532] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [    0.400587] system 00:01: [mem 0xfed14000-0xfed19fff] could not be reserved
    [    0.400589] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [    0.400593] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.400629] pnp 00:02: [dma 4]
    [    0.400631] pnp 00:02: [io  0x0000-0x000f]
    [    0.400633] pnp 00:02: [io  0x0081-0x0083]
    [    0.400635] pnp 00:02: [io  0x0087]
    [    0.400637] pnp 00:02: [io  0x0089-0x008b]
    [    0.400639] pnp 00:02: [io  0x008f]
    [    0.400641] pnp 00:02: [io  0x00c0-0x00df]
    [    0.400668] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.400679] pnp 00:03: [io  0x0070-0x0071]
    [    0.400689] pnp 00:03: [irq 8]
    [    0.400718] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.400746] pnp 00:04: [io  0x0060]
    [    0.400749] pnp 00:04: [io  0x0064]
    [    0.400754] pnp 00:04: [irq 1]
    [    0.400782] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.400826] pnp 00:05: [irq 12]
    [    0.400855] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [    0.400864] pnp 00:06: [io  0x0061]
    [    0.400894] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.400903] pnp 00:07: [io  0x00f0-0x00ff]
    [    0.400907] pnp 00:07: [irq 13]
    [    0.400935] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.401330] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
    [    0.401333] pnp 00:08: [io  0x0a00-0x0a0f]
    [    0.401335] pnp 00:08: [io  0x0a10-0x0a1f]
    [    0.401339] pnp 00:08: [io  0x0a20-0x0a2f]
    [    0.401341] pnp 00:08: [io  0x0a30-0x0a3f]
    [    0.401391] system 00:08: [io  0x0a00-0x0a0f] has been reserved
    [    0.401394] system 00:08: [io  0x0a10-0x0a1f] has been reserved
    [    0.401396] system 00:08: [io  0x0a20-0x0a2f] has been reserved
    [    0.401399] system 00:08: [io  0x0a30-0x0a3f] has been reserved
    [    0.401402] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401511] pnp 00:09: [io  0x0010-0x001f]
    [    0.401513] pnp 00:09: [io  0x0022-0x003f]
    [    0.401515] pnp 00:09: [io  0x0044-0x005f]
    [    0.401517] pnp 00:09: [io  0x0062-0x0063]
    [    0.401519] pnp 00:09: [io  0x0065-0x006f]
    [    0.401521] pnp 00:09: [io  0x0072-0x007f]
    [    0.401523] pnp 00:09: [io  0x0080]
    [    0.401525] pnp 00:09: [io  0x0084-0x0086]
    [    0.401527] pnp 00:09: [io  0x0088]
    [    0.401529] pnp 00:09: [io  0x008c-0x008e]
    [    0.401531] pnp 00:09: [io  0x0090-0x009f]
    [    0.401533] pnp 00:09: [io  0x00a2-0x00bf]
    [    0.401535] pnp 00:09: [io  0x00e0-0x00ef]
    [    0.401537] pnp 00:09: [io  0x04d0-0x04d1]
    [    0.401539] pnp 00:09: [io  0x0800-0x087f]
    [    0.401541] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
    [    0.401543] pnp 00:09: [io  0x0500-0x057f]
    [    0.401545] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [    0.401547] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [    0.401549] pnp 00:09: [mem 0xfed40000-0xfed8ffff]
    [    0.401610] system 00:09: [io  0x04d0-0x04d1] has been reserved
    [    0.401613] system 00:09: [io  0x0800-0x087f] has been reserved
    [    0.401615] system 00:09: [io  0x0500-0x057f] has been reserved
    [    0.401618] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.401621] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.401624] system 00:09: [mem 0xfed40000-0xfed8ffff] has been reserved
    [    0.401627] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401681] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
    [    0.401712] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.401761] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
    [    0.401763] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [    0.401795] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.401836] pnp 00:0c: [mem 0xffc00000-0xffefffff]
    [    0.401885] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
    [    0.401888] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.401966] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
    [    0.401968] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
    [    0.402018] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.402021] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.402024] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.402068] pnp 00:0e: [mem 0xe0000000-0xefffffff]
    [    0.402116] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.402119] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.402294] pnp 00:0f: [mem 0x00000000-0x0009ffff]
    [    0.402296] pnp 00:0f: [mem 0x000c0000-0x000cffff]
    [    0.402298] pnp 00:0f: [mem 0x000e0000-0x000fffff]
    [    0.402301] pnp 00:0f: [mem 0x00100000-0xbfffffff]
    [    0.402303] pnp 00:0f: [mem 0xfed90000-0xffffffff]
    [    0.402363] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.402366] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
    [    0.402368] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.402371] system 00:0f: [mem 0x00100000-0xbfffffff] could not be reserved
    [    0.402374] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
    [    0.402377] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.402506] pnp: PnP ACPI: found 16 devices
    [    0.402508] ACPI: ACPI bus type pnp unregistered
    [    0.402511] PnPBIOS: Disabled by ACPI PNP
    [    0.440569] PCI: max bus depth: 1 pci_try_num: 2
    [    0.440600] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440604] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.440606] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.440610] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.440613] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.440617] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.440620] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.440625] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.440629] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440634] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [    0.440661] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.440664] pci 0000:00:01.0: setting latency timer to 64
    [    0.440674] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.440678] pci 0000:00:1c.0: setting latency timer to 64
    [    0.440684] pci 0000:00:1e.0: setting latency timer to 64
    [    0.440688] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.440690] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.440692] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.440695] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.440697] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.440699] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.440702] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
    [    0.440704] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [    0.440707] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.440709] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
    [    0.440712] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [    0.440714] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.440717] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
    [    0.440719] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
    [    0.440721] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.440723] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.440726] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.440728] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.440769] NET: Registered protocol family 2
    [    0.440841] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.441057] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.441384] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.441550] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.441552] TCP reno registered
    [    0.441555] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.441563] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.441645] NET: Registered protocol family 1
    [    0.441674] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.441690] pci 0000:00:1a.0: PCI INT A disabled
    [    0.441704] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.441719] pci 0000:00:1a.1: PCI INT B disabled
    [    0.441729] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.441744] pci 0000:00:1a.2: PCI INT D disabled
    [    0.441755] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.441785] pci 0000:00:1a.7: PCI INT C disabled
    [    0.441800] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.441814] pci 0000:00:1d.0: PCI INT A disabled
    [    0.441821] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.441836] pci 0000:00:1d.1: PCI INT B disabled
    [    0.441842] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.441857] pci 0000:00:1d.2: PCI INT C disabled
    [    0.441865] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.441878] pci 0000:00:1d.7: PCI INT A disabled
    [    0.441892] pci 0000:01:00.0: Boot video device
    [    0.441900] PCI: CLS 32 bytes, default 64
    [    0.442390] audit: initializing netlink socket (disabled)
    [    0.442399] type=2000 audit(1349809087.436:1): initialized
    [    0.463394] highmem bounce pool size: 64 pages
    [    0.463400] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.466033] VFS: Disk quotas dquot_6.5.2
    [    0.466095] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.466676] fuse init (API version 7.17)
    [    0.466792] msgmni has been set to 1565
    [    0.467341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.467386] io scheduler noop registered
    [    0.467388] io scheduler deadline registered
    [    0.467400] io scheduler cfq registered (default)
    [    0.467509] pcieport 0000:00:01.0: setting latency timer to 64
    [    0.467540] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [    0.467587] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.467621] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [    0.467700] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.467724] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.467785] intel_idle: MWAIT substates: 0x20
    [    0.467787] intel_idle: does not run on family 6 model 23
    [    0.467869] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.467874] ACPI: Power Button [PWRB]
    [    0.467919] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.467923] ACPI: Power Button [PWRF]
    [    0.470589] ERST: Table is not found!
    [    0.470591] GHES: HEST is not enabled!
    [    0.470689] isapnp: Scanning for PnP cards...
    [    0.470693] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    0.631366] Freeing initrd memory: 13828k freed
    [    0.823572] isapnp: No Plug & Play device found
    [    0.876587] Linux agpgart interface v0.103
    [    0.878701] brd: module loaded
    [    0.879728] loop: module loaded
    [    0.879866] ahci 0000:00:1f.2: version 3.0
    [    0.879877] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.879915] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [    0.879959] ahci: SSS flag set, parallel bus scan disabled
    [    0.879990] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [    0.879994] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
    [    0.879998] ahci 0000:00:1f.2: setting latency timer to 64
    [    0.920605] scsi0 : ahci
    [    0.920717] scsi1 : ahci
    [    0.920813] scsi2 : ahci
    [    0.920910] scsi3 : ahci
    [    0.921009] scsi4 : ahci
    [    0.921111] scsi5 : ahci
    [    0.921275] ata1: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4100 irq 42
    [    0.921278] ata2: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4180 irq 42
    [    0.921280] ata3: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4200 irq 42
    [    0.921283] ata4: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4280 irq 42
    [    0.921286] ata5: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4300 irq 42
    [    0.921288] ata6: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4380 irq 42
    [    0.921702] Fixed MDIO Bus: probed
    [    0.921722] tun: Universal TUN/TAP device driver, 1.6
    [    0.921724] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.921804] PPP generic driver version 2.4.2
    [    0.921960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.921976] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.921989] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    0.921993] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    0.922062] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    0.922084] ehci_hcd 0000:00:1a.7: debug port 1
    [    0.925951] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [    0.925966] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9dc000
    [    0.940015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [    0.940179] hub 1-0:1.0: USB hub found
    [    0.940184] hub 1-0:1.0: 6 ports detected
    [    0.940261] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.940271] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.940274] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.940339] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    0.940360] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.944234] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    0.944248] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9d6000
    [    0.960014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.960155] hub 2-0:1.0: USB hub found
    [    0.960159] hub 2-0:1.0: 6 ports detected
    [    0.960232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.960245] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.960260] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.960267] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [    0.960270] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    0.960332] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    0.960362] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
    [    0.960510] hub 3-0:1.0: USB hub found
    [    0.960514] hub 3-0:1.0: 2 ports detected
    [    0.960577] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.960585] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    0.960588] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    0.960662] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    0.960693] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
    [    0.960840] hub 4-0:1.0: USB hub found
    [    0.960843] hub 4-0:1.0: 2 ports detected
    [    0.960912] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.960918] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [    0.960921] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [    0.960987] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [    0.961017] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
    [    0.961163] hub 5-0:1.0: USB hub found
    [    0.961166] hub 5-0:1.0: 2 ports detected
    [    0.961226] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.961232] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.961235] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.961302] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [    0.961322] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
    [    0.961468] hub 6-0:1.0: USB hub found
    [    0.961472] hub 6-0:1.0: 2 ports detected
    [    0.961538] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.961545] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.961547] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.961614] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [    0.961635] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
    [    0.961780] hub 7-0:1.0: USB hub found
    [    0.961784] hub 7-0:1.0: 2 ports detected
    [    0.961848] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.961855] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.961858] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.961923] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [    0.961944] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
    [    0.962096] hub 8-0:1.0: USB hub found
    [    0.962100] hub 8-0:1.0: 2 ports detected
    [    0.962214] usbcore: registered new interface driver libusual
    [    0.962273] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [    0.962634] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.962641] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.962799] mousedev: PS/2 mouse device common for all mice
    [    0.963014] rtc_cmos 00:03: RTC can wake from S4
    [    0.963137] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    0.963159] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    0.963218] device-mapper: uevent: version 1.0.3
    [    0.963315] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    [    0.963347] EISA: Probing bus 0 at eisa.0
    [    0.963349] EISA: Cannot allocate resource for mainboard
    [    0.963351] Cannot allocate resource for EISA slot 1
    [    0.963353] Cannot allocate resource for EISA slot 2
    [    0.963354] Cannot allocate resource for EISA slot 3
    [    0.963356] Cannot allocate resource for EISA slot 4
    [    0.963358] Cannot allocate resource for EISA slot 5
    [    0.963359] Cannot allocate resource for EISA slot 6
    [    0.963361] Cannot allocate resource for EISA slot 7
    [    0.963363] Cannot allocate resource for EISA slot 8
    [    0.963364] EISA: Detected 0 cards.
    [    0.963373] cpufreq-nforce2: No nForce2 chipset.
    [    0.963375] cpuidle: using governor ladder
    [    0.963377] cpuidle: using governor menu
    [    0.963379] EFI Variables Facility v0.08 2004-May-17
    [    0.963643] TCP cubic registered
    [    0.963770] NET: Registered protocol family 10
    [    0.964343] NET: Registered protocol family 17
    [    0.964347] Registering the dns_resolver key type
    [    0.964371] Using IPI No-Shortcut mode
    [    0.964533] PM: Hibernation image not present or could not be loaded.
    [    0.964544] registered taskstats version 1
    [    0.971419]   Magic number: 0:54:999
    [    0.971460] system 00:01: hash matches
    [    0.971462]  pnp0: hash matches
    [    0.971523] rtc_cmos 00:03: setting system clock to 2012-10-09 18:58:09 UTC (1349809089)
    [    0.972586] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.972588] EDD information not available.
    [    0.979396] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.240021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.243031] ata1.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
    [    1.246909] ata1.00: configured for UDMA/100
    [    1.252016] usb 1-4: new high-speed USB device number 2 using ehci_hcd
    [    1.257625] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH40F     MG01 PQ: 0 ANSI: 5
    [    1.266069] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.266072] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.266219] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    1.266302] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    1.440015] Refined TSC clocksource calibration: 2327.754 MHz.
    [    1.440020] Switching to clocksource tsc
    [    1.568012] usb 2-3: new high-speed USB device number 2 using ehci_hcd
    [    1.584015] ata2: SATA link down (SStatus 0 SControl 300)
    [    1.704392] Initializing USB Mass Storage driver...
    [    1.704558] scsi6 : usb-storage 2-3:1.0
    [    1.704636] usbcore: registered new interface driver usb-storage
    [    1.704638] USB Mass Storage support registered.
    [    1.904014] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.940013] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [    2.224015] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    2.242239] ata4.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
    [    2.242243] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [    2.243260] ata4.00: configured for UDMA/133
    [    2.243381] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
    [    2.243495] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    2.243541] sd 3:0:0:0: Attached scsi generic sg1 type 0
    [    2.243562] sd 3:0:0:0: [sda] Write Protect is off
    [    2.243565] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.243589] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.286130]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    2.286610] sd 3:0:0:0: [sda] Attached SCSI disk
    [    2.560014] ata5: SATA link down (SStatus 0 SControl 300)
    [    2.704832] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
    [    2.705454] scsi 6:0:0:1: Direct-Access     Multiple Flash Reader     1.05 PQ: 0 ANSI: 0
    [    2.706262] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [    2.706462] sd 6:0:0:1: Attached scsi generic sg3 type 0
    [    2.709933] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [    2.710555] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [    2.880021] ata6: SATA link down (SStatus 0 SControl 300)
    [    2.880115] Freeing unused kernel memory: 740k freed
    [    2.880383] Write protecting the kernel text: 5820k
    [    2.880412] Write protecting the kernel read-only data: 2376k
    [    2.880414] NX-protecting the kernel data: 4420k
    [    2.897294] udevd[113]: starting version 175
    [    2.929202] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
    [    2.929205] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [    2.929243] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    2.929252] e1000e 0000:00:19.0: setting latency timer to 64
    [    2.929356] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [    2.931976] generic-usb 0003:058F:6363.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.7-3/input1
    [    2.934159] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.934168] firewire_ohci 0000:02:00.0: setting latency timer to 64
    [    2.947556] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
    [    2.947688] generic-usb 0003:046D:C51B.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-1/input0
    [    2.961151] generic-usb 0003:046D:C51B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input1
    [    2.961171] usbcore: registered new interface driver usbhid
    [    2.961173] usbhid: USB HID core driver
    [    2.996049] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
    [    3.120316] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:f4:ca:94
    [    3.120320] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [    3.120343] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
    [    3.496105] firewire_core: created device fw0: GUID 001d72ffae924fff, S400
    [    3.628091] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [   13.558354] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   13.574468] udevd[345]: starting version 175
    [   13.612205] lp: driver loaded but no devices found
    [   13.613255] [drm] Initialized drm 1.1.0 20060810
    [   13.627489] Adding 9068540k swap on /dev/sda5.  Priority:-1 extents:1 across:9068540k 
    [   13.645401] wmi: Mapper loaded
    [   13.647362] [drm] radeon defaulting to kernel modesetting.
    [   13.647365] [drm] radeon kernel modesetting enabled.
    [   13.648293] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   13.648299] radeon 0000:01:00.0: setting latency timer to 64
    [   13.666981] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x174B:0xE990).
    [   13.667009] [drm] register mmio base: 0xFEAF0000
    [   13.667011] [drm] register mmio size: 65536
    [   13.667131] ATOM BIOS: 11X
    [   13.667162] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [   13.667165] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [   13.669611] [drm] Detected VRAM RAM=512M, BAR=256M
    [   13.669614] [drm] RAM width 64bits DDR
    [   13.670153] [TTM] Zone  kernel: Available graphics memory: 408100 kiB.
    [   13.670156] [TTM] Zone highmem: Available graphics memory: 3096904 kiB.
    [   13.670157] [TTM] Initializing pool allocator.
    [   13.670180] [drm] radeon: 512M of VRAM memory ready
    [   13.670182] [drm] radeon: 512M of GTT memory ready.
    [   13.670197] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   13.670199] [drm] Driver supports precise vblank timestamp query.
    [   13.670261] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [   13.670267] radeon 0000:01:00.0: radeon: using MSI.
    [   13.670299] [drm] radeon: irq initialized.
    [   13.670303] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [   13.671330] [drm] Loading RV710 Microcode
    [   13.671791] type=1400 audit(1349801902.193:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=497 comm="apparmor_parser"
    [   13.672385] type=1400 audit(1349801902.197:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=497 comm="apparmor_parser"
    [   13.672625] type=1400 audit(1349801902.197:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=497 comm="apparmor_parser"
    [   13.697069] cfg80211: Calling CRDA to update world regulatory domain
    [   13.720298] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   13.720347] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [   13.720372] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [   13.823592] cfg80211: World regulatory domain updated:
    [   13.823595] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   13.823598] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.823601] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.823603] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.823605] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.823608] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.824118] usb 1-4: reset high-speed USB device number 2 using ehci_hcd
    [   13.856981] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [   13.857032] radeon 0000:01:00.0: WB enabled
    [   13.903019] [drm] ring test succeeded in 1 usecs
    [   13.903179] [drm] radeon: ib pool ready.
    [   13.903252] [drm] ib test succeeded in 0 usecs
    [   13.903551] [drm] Radeon Display Connectors
    [   13.903553] [drm] Connector 0:
    [   13.903554] [drm]   VGA
    [   13.903556] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [   13.903558] [drm]   Encoders:
    [   13.903559] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
    [   13.903561] [drm] Connector 1:
    [   13.903562] [drm]   HDMI-A
    [   13.903563] [drm]   HPD1
    [   13.903565] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [   13.903567] [drm]   Encoders:
    [   13.903568] [drm]     DFP1: INTERNAL_UNIPHY
    [   13.903570] [drm] Connector 2:
    [   13.903571] [drm]   DVI-I
    [   13.903572] [drm]   HPD4
    [   13.903574] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
    [   13.903576] [drm]   Encoders:
    [   13.903577] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
    [   13.903579] [drm]     DFP2: INTERNAL_UNIPHY2
    [   13.903596] [drm] Internal thermal controller with fan control
    [   13.903639] [drm] radeon: power management initialized
    [   13.977654] [drm] fb mappable at 0xD0142000
    [   13.977657] [drm] vram apper at 0xD0000000
    [   13.977658] [drm] size 5242880
    [   13.977660] [drm] fb depth is 24
    [   13.977661] [drm]    pitch is 5120
    [   13.977744] fbcon: radeondrmfb (fb0) is primary device
    [   13.977857] Console: switching to colour frame buffer device 160x64
    [   13.977888] fb0: radeondrmfb frame buffer device
    [   13.977890] drm: registered panic notifier
    [   13.977896] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
    [   13.995600] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995604] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995606] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995609] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995611] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995614] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995616] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995618] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995620] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995623] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995625] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995628] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995630] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995634] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995637] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995639] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995642] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995644] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995647] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995649] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995651] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   13.995654] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995656] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.995658] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995661] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.995663] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [   13.995665] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   13.997016] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
    [   13.998735] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   13.999370] Registered led device: rt2800usb-phy0::radio
    [   13.999406] Registered led device: rt2800usb-phy0::assoc
    [   13.999434] Registered led device: rt2800usb-phy0::quality
    [   13.999480] usbcore: registered new interface driver rt2800usb
    [   14.345257] init: failsafe main process (782) killed by TERM signal
    [   14.381923] Bluetooth: Core ver 2.16
    [   14.381948] NET: Registered protocol family 31
    [   14.381949] Bluetooth: HCI device and connection manager initialized
    [   14.381952] Bluetooth: HCI socket layer initialized
    [   14.381954] Bluetooth: L2CAP socket layer initialized
    [   14.381960] Bluetooth: SCO socket layer initialized
    [   14.383907] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   14.383910] Bluetooth: BNEP filters: protocol multicast
    [   14.389033] Bluetooth: RFCOMM TTY layer initialized
    [   14.389039] Bluetooth: RFCOMM socket layer initialized
    [   14.389041] Bluetooth: RFCOMM ver 1.11
    [   14.405181] ppdev: user-space parallel port driver
    [   14.417647] type=1400 audit(1349801902.941:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=854 comm="apparmor_parser"
    [   14.418166] type=1400 audit(1349801902.941:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=854 comm="apparmor_parser"
    [   14.556943] type=1400 audit(1349801903.081:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=890 comm="apparmor_parser"
    [   14.557297] type=1400 audit(1349801903.081:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=891 comm="apparmor_parser"
    [   14.557754] type=1400 audit(1349801903.081:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=891 comm="apparmor_parser"
    [   14.558000] type=1400 audit(1349801903.081:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=891 comm="apparmor_parser"
    [   14.559005] type=1400 audit(1349801903.081:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=894 comm="apparmor_parser"
    [   14.624209] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   14.647625] init: alsa-restore main process (933) terminated with status 19
    [   14.680114] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   14.680352] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.680699] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.896351] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   14.896833] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   16.772015] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
    [   17.780029] hda-intel: No response from codec, disabling MSI: last cmd=0x300f0000
    [   18.176283] wlan0: authenticate with 00:1a:2b:13:ba:89 (try 1)
    [   18.177794] wlan0: authenticated
    [   18.232283] wlan0: associate with 00:1a:2b:13:ba:89 (try 1)
    [   18.234046] wlan0: RX AssocResp from 00:1a:2b:13:ba:89 (capab=0x411 status=0 aid=1)
    [   18.234050] wlan0: associated
    [   18.243835] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   18.784013] hda-intel: Codec #3 probe error; disabling it...
    [   18.827233] hda_codec: ALC888: BIOS auto-probing.
    [   18.835472] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
    [   18.835634] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [   18.835708] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [   18.835779] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [   18.835849] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [   18.835918] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [   18.835989] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [   18.836380] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [   18.836448] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
    [   18.836472] snd_hda_intel 0000:01:00.1: setting latency timer to 64
    [   18.854374] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
    [   18.854514] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [   18.984643] init: plymouth-stop pre-start process (1556) terminated with status 1
    [   29.008005] wlan0: no IPv6 routers present
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.2.0-32-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:54:23 UTC 2012 (Ubuntu 3.2.0-32.51-generic-pae 3.2.30)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
    [    0.000000]  BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01100 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed02000 - 00000000fed14c00 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI present.
    [    0.000000] DMI: Acer Aspire X3810/WG43M, BIOS P01-A3 05/26/2009
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x1000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-DFFFF uncachable
    [    0.000000]   E0000-EFFFF write-through
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 1C0000000 mask FC0000000 uncachable
    [    0.000000]   1 base 000000000 mask E00000000 write-back
    [    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] original variable MTRRs
    [    0.000000] reg 0, base: 7GB, range: 1GB, type UC
    [    0.000000] reg 1, base: 0GB, range: 8GB, type WB
    [    0.000000] reg 2, base: 3GB, range: 1GB, type UC
    [    0.000000] total RAM covered: 6144M
    [    0.000000] Found optimal setting for mtrr clean up
    [    0.000000]  gran_size: 64K     chunk_size: 64K     num_reg: 4      lose cover RAM: 0G
    [    0.000000] New variable MTRRs
    [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
    [    0.000000] reg 2, base: 4GB, range: 2GB, type WB
    [    0.000000] reg 3, base: 6GB, range: 1GB, type WB
    [    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] found SMP MP-table at [c00ff780] ff780
    [    0.000000] initial memory mapped : 0 - 02000000
    [    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
    [    0.000000]  0000000000 - 0000200000 page 4k
    [    0.000000]  0000200000 - 0037a00000 page 2M
    [    0.000000]  0037a00000 - 0037bfe000 page 4k
    [    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
    [    0.000000] RAMDISK: 364ec000 - 3726e000
    [    0.000000] ACPI: RSDP 000fa770 00024 (v02 ACPIAM)
    [    0.000000] ACPI: XSDT bff90100 0006C (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: FACP bff90290 000F4 (v04 052609 FACP2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: DSDT bff905c0 061D5 (v02   P01-   P01-A3 000000A3 INTL 20051117)
    [    0.000000] ACPI: FACS bff9e000 00040
    [    0.000000] ACPI: APIC bff90390 0006C (v02 052609 APIC2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: MCFG bff90400 0003C (v01 052609 OEMMCFG  20090526 MSFT 00000097)
    [    0.000000] ACPI: SLIC bff90440 00176 (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: OEMB bff9e040 00072 (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: HPET bff9a5c0 00038 (v01 052609 OEMHPET  20090526 MSFT 00000097)
    [    0.000000] ACPI: GSCI bff9e0c0 02024 (v01 052609 GMCHSCI  20090526 MSFT 00000097)
    [    0.000000] ACPI: AWMI bffa00f0 0004E (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: SSDT bffa0940 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 6276MB HIGHMEM available.
    [    0.000000] 891MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 37bfe000
    [    0.000000]   low ram: 0 - 37bfe000
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x00037bfe
    [    0.000000]   HighMem  0x00037bfe -> 0x001c0000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009e
    [    0.000000]     0: 0x00000100 -> 0x000bff90
    [    0.000000]     0: 0x00100000 -> 0x001c0000
    [    0.000000] On node 0 totalpages: 1572638
    [    0.000000] free_area_init_node: node 0, pgdat c1868a80, node_mem_map f2cec200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3950 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1752 pages used for memmap
    [    0.000000]   Normal zone: 222502 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 12553 pages used for memmap
    [    0.000000]   HighMem zone: 1331849 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34240 r0 d23104 u57344
    [    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1558301
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic-pae root=UUID=3169b696-02b9-4593-b5f7-30c72e816dc7 ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 29359872 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00037bfe:001c0000)
    [    0.000000] Memory: 6179236k/7340032k available (5820k kernel code, 111316k reserved, 2844k data, 740k init, 5377608k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    [    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    [    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
    [    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
    [    0.000000]       .data : 0xc15af13c - 0xc1876280   (2844 kB)
    [    0.000000]       .text : 0xc1000000 - 0xc15af13c   (5820 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:2304 nr_irqs:712 16
    [    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2327.825 MHz processor.
    [    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.65 BogoMIPS (lpj=9311300)
    [    0.004006] pid_max: default: 32768 minimum: 301
    [    0.004026] Security Framework initialized
    [    0.004041] AppArmor: AppArmor initialized
    [    0.004043] Yama: becoming mindful.
    [    0.004094] Mount-cache hash table entries: 512
    [    0.004218] Initializing cgroup subsys cpuacct
    [    0.004224] Initializing cgroup subsys memory
    [    0.004232] Initializing cgroup subsys devices
    [    0.004234] Initializing cgroup subsys freezer
    [    0.004236] Initializing cgroup subsys blkio
    [    0.004241] Initializing cgroup subsys perf_event
    [    0.004266] CPU: Physical Processor ID: 0
    [    0.004268] CPU: Processor Core ID: 0
    [    0.004271] mce: CPU supports 6 MCE banks
    [    0.004279] CPU0: Thermal monitoring enabled (TM2)
    [    0.004282] using mwait in idle threads.
    [    0.009934] ACPI: Core revision 20110623
    [    0.016011] ftrace: allocating 26564 entries in 52 pages
    [    0.020043] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.020397] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.062722] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
    [    0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [    0.064003] ... version:                2
    [    0.064003] ... bit width:              40
    [    0.064003] ... generic registers:      2
    [    0.064003] ... value mask:             000000ffffffffff
    [    0.064003] ... max period:             000000007fffffff
    [    0.064003] ... fixed-purpose events:   3
    [    0.064003] ... event mask:             0000000700000003
    [    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.064003] CPU 1 irqstacks, hard=f7512000 soft=f7514000
    [    0.064003] Booting Node   0, Processors  #1
    [    0.064003] smpboot cpu 1: start_ip = 9a000
    [    0.008000] Initializing CPU#1
    [    0.156032] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.156125] CPU 2 irqstacks, hard=f7520000 soft=f7522000
    [    0.156127]  #2
    [    0.156128] smpboot cpu 2: start_ip = 9a000
    [    0.008000] Initializing CPU#2
    [    0.248031] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.248117] CPU 3 irqstacks, hard=f752e000 soft=f7538000
    [    0.248119]  #3 Ok.
    [    0.248120] smpboot cpu 3: start_ip = 9a000
    [    0.008000] Initializing CPU#3
    [    0.344037] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.344060] Brought up 4 CPUs
    [    0.344063] Total of 4 processors activated (18622.14 BogoMIPS).
    [    0.347008] devtmpfs: initialized
    [    0.347008] EVM: security.selinux
    [    0.347008] EVM: security.SMACK64
    [    0.347008] EVM: security.capability
    [    0.347008] PM: Registering ACPI NVS region at bff9e000 (270336 bytes)
    [    0.348572] print_constraints: dummy: 
    [    0.348599] RTC time:  8:07:11, date: 10/21/12
    [    0.348636] NET: Registered protocol family 16
    [    0.348645] Trying to unpack rootfs image as initramfs...
    [    0.348764] EISA bus registered
    [    0.348792] ACPI: bus type pci registered
    [    0.348854] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.348857] PCI: not using MMCONFIG
    [    0.348933] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
    [    0.348993] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    [    0.348994] PCI: Using configuration type 1 for base access
    [    0.350091] bio: create slab <bio-0> at 0
    [    0.350091] ACPI: Added _OSI(Module Device)
    [    0.350091] ACPI: Added _OSI(Processor Device)
    [    0.350091] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.350091] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.350091] ACPI: EC: Look up EC in DSDT
    [    0.352970] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.355656] ACPI: SSDT bffa0140 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.355965] ACPI: Dynamic OEM Table Load:
    [    0.355968] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.356258] ACPI: SSDT bffa0340 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.356568] ACPI: Dynamic OEM Table Load:
    [    0.356571] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.356847] ACPI: SSDT bffa0540 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.357158] ACPI: Dynamic OEM Table Load:
    [    0.357161] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.357430] ACPI: SSDT bffa0740 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.357742] ACPI: Dynamic OEM Table Load:
    [    0.357745] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.357932] ACPI: Interpreter enabled
    [    0.357938] ACPI: (supports S0 S3 S4 S5)
    [    0.357958] ACPI: Using IOAPIC for interrupt routing
    [    0.357983] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.359172] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [    0.359174] PCI: Using MMCONFIG for extended config space
    [    0.364655] ACPI: No dock devices found.
    [    0.364659] HEST: Table not found.
    [    0.364663] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.364749] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.364926] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
    [    0.364929] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
    [    0.364931] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.364934] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [    0.364936] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [    0.364939] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
    [    0.364953] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [    0.364994] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [    0.365032] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [    0.365035] pci 0000:00:01.0: PME# disabled
    [    0.365074] pci 0000:00:19.0: [8086:10ce] type 0 class 0x000200
    [    0.365091] pci 0000:00:19.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
    [    0.365100] pci 0000:00:19.0: reg 14: [mem 0xfe9de000-0xfe9defff]
    [    0.365108] pci 0000:00:19.0: reg 18: [io  0xcc00-0xcc1f]
    [    0.365166] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [    0.365170] pci 0000:00:19.0: PME# disabled
    [    0.365188] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [    0.365229] pci 0000:00:1a.0: reg 20: [io  0xc880-0xc89f]
    [    0.365277] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [    0.365316] pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
    [    0.365364] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [    0.365403] pci 0000:00:1a.2: reg 20: [io  0xc480-0xc49f]
    [    0.365461] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [    0.365481] pci 0000:00:1a.7: reg 10: [mem 0xfe9dc000-0xfe9dc3ff]
    [    0.365565] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [    0.365570] pci 0000:00:1a.7: PME# disabled
    [    0.365592] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [    0.365606] pci 0000:00:1b.0: reg 10: [mem 0xfe9d8000-0xfe9dbfff 64bit]
    [    0.365669] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.365673] pci 0000:00:1b.0: PME# disabled
    [    0.365691] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [    0.365760] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.365764] pci 0000:00:1c.0: PME# disabled
    [    0.365789] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [    0.365829] pci 0000:00:1d.0: reg 20: [io  0xc400-0xc41f]
    [    0.365876] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [    0.365917] pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
    [    0.365965] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [    0.366004] pci 0000:00:1d.2: reg 20: [io  0xc000-0xc01f]
    [    0.366063] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [    0.366083] pci 0000:00:1d.7: reg 10: [mem 0xfe9d6000-0xfe9d63ff]
    [    0.366167] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.366172] pci 0000:00:1d.7: PME# disabled
    [    0.366191] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [    0.366250] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
    [    0.366363] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
    [    0.366380] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
    [    0.366388] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
    [    0.366395] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
    [    0.366403] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
    [    0.366411] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb41f]
    [    0.366418] pci 0000:00:1f.2: reg 24: [mem 0xfe9d4000-0xfe9d47ff]
    [    0.366461] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.366465] pci 0000:00:1f.2: PME# disabled
    [    0.366480] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [    0.366494] pci 0000:00:1f.3: reg 10: [mem 0xfe9d3c00-0xfe9d3cff 64bit]
    [    0.366514] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
    [    0.366570] pci 0000:01:00.0: [1002:954f] type 0 class 0x000300
    [    0.366584] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.366595] pci 0000:01:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff 64bit]
    [    0.366602] pci 0000:01:00.0: reg 20: [io  0xd000-0xd0ff]
    [    0.366617] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
    [    0.366647] pci 0000:01:00.0: supports D1 D2
    [    0.366666] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
    [    0.366680] pci 0000:01:00.1: reg 10: [mem 0xfeaec000-0xfeaeffff 64bit]
    [    0.366736] pci 0000:01:00.1: supports D1 D2
    [    0.366765] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.366768] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.366772] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.366776] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.366831] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
    [    0.366853] pci 0000:02:00.0: reg 10: [mem 0xfebff800-0xfebfffff 64bit]
    [    0.366866] pci 0000:02:00.0: reg 18: [io  0xe800-0xe8ff]
    [    0.366959] pci 0000:02:00.0: supports D2
    [    0.366961] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
    [    0.366966] pci 0000:02:00.0: PME# disabled
    [    0.372042] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.372046] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.372050] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.372123] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [    0.372137] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.372143] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.372145] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.372148] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [    0.372150] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [    0.372153] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
    [    0.372166] pci_bus 0000:00: on NUMA node 0
    [    0.372170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.372376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [    0.372427]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.372430]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.372432] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.381191] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
    [    0.381240] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
    [    0.381283] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
    [    0.381329] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
    [    0.381376] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15)
    [    0.381422] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
    [    0.381469] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
    [    0.381515] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
    [    0.381626] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.381626] vgaarb: loaded
    [    0.381626] vgaarb: bridge control possible 0000:01:00.0
    [    0.381626] i2c-core: driver [aat2870] using legacy suspend method
    [    0.381626] i2c-core: driver [aat2870] using legacy resume method
    [    0.381626] SCSI subsystem initialized
    [    0.381626] libata version 3.00 loaded.
    [    0.381626] usbcore: registered new interface driver usbfs
    [    0.381626] usbcore: registered new interface driver hub
    [    0.381626] usbcore: registered new device driver usb
    [    0.381626] PCI: Using ACPI for IRQ routing
    [    0.381626] PCI: pci_cache_line_size set to 64 bytes
    [    0.381626] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
    [    0.381626] reserve RAM buffer: 00000000bff90000 - 00000000bfffffff 
    [    0.381626] NetLabel: Initializing
    [    0.381626] NetLabel:  domain hash size = 128
    [    0.381626] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.381626] NetLabel:  unlabeled traffic allowed by default
    [    0.381626] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [    0.381626] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [    0.381626] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [    0.396145] Switching to clocksource hpet
    [    0.404296] AppArmor: AppArmor Filesystem Enabled
    [    0.404325] pnp: PnP ACPI init
    [    0.404342] ACPI: bus type pnp registered
    [    0.404459] pnp 00:00: [bus 00-ff]
    [    0.404461] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.404464] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.404466] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.404469] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.404471] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [    0.404474] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [    0.404476] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
    [    0.404533] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.404543] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [    0.404545] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [    0.404600] system 00:01: [mem 0xfed14000-0xfed19fff] could not be reserved
    [    0.404603] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [    0.404607] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.404641] pnp 00:02: [dma 4]
    [    0.404644] pnp 00:02: [io  0x0000-0x000f]
    [    0.404646] pnp 00:02: [io  0x0081-0x0083]
    [    0.404648] pnp 00:02: [io  0x0087]
    [    0.404650] pnp 00:02: [io  0x0089-0x008b]
    [    0.404652] pnp 00:02: [io  0x008f]
    [    0.404653] pnp 00:02: [io  0x00c0-0x00df]
    [    0.404680] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.404691] pnp 00:03: [io  0x0070-0x0071]
    [    0.404702] pnp 00:03: [irq 8]
    [    0.404731] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.404759] pnp 00:04: [io  0x0060]
    [    0.404762] pnp 00:04: [io  0x0064]
    [    0.404767] pnp 00:04: [irq 1]
    [    0.404795] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.404839] pnp 00:05: [irq 12]
    [    0.404867] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [    0.404877] pnp 00:06: [io  0x0061]
    [    0.404906] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.404915] pnp 00:07: [io  0x00f0-0x00ff]
    [    0.404920] pnp 00:07: [irq 13]
    [    0.404948] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.405339] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
    [    0.405342] pnp 00:08: [io  0x0a00-0x0a0f]
    [    0.405344] pnp 00:08: [io  0x0a10-0x0a1f]
    [    0.405348] pnp 00:08: [io  0x0a20-0x0a2f]
    [    0.405350] pnp 00:08: [io  0x0a30-0x0a3f]
    [    0.405401] system 00:08: [io  0x0a00-0x0a0f] has been reserved
    [    0.405404] system 00:08: [io  0x0a10-0x0a1f] has been reserved
    [    0.405407] system 00:08: [io  0x0a20-0x0a2f] has been reserved
    [    0.405409] system 00:08: [io  0x0a30-0x0a3f] has been reserved
    [    0.405413] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.405521] pnp 00:09: [io  0x0010-0x001f]
    [    0.405524] pnp 00:09: [io  0x0022-0x003f]
    [    0.405526] pnp 00:09: [io  0x0044-0x005f]
    [    0.405528] pnp 00:09: [io  0x0062-0x0063]
    [    0.405530] pnp 00:09: [io  0x0065-0x006f]
    [    0.405532] pnp 00:09: [io  0x0072-0x007f]
    [    0.405534] pnp 00:09: [io  0x0080]
    [    0.405536] pnp 00:09: [io  0x0084-0x0086]
    [    0.405538] pnp 00:09: [io  0x0088]
    [    0.405540] pnp 00:09: [io  0x008c-0x008e]
    [    0.405542] pnp 00:09: [io  0x0090-0x009f]
    [    0.405544] pnp 00:09: [io  0x00a2-0x00bf]
    [    0.405546] pnp 00:09: [io  0x00e0-0x00ef]
    [    0.405548] pnp 00:09: [io  0x04d0-0x04d1]
    [    0.405550] pnp 00:09: [io  0x0800-0x087f]
    [    0.405552] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
    [    0.405554] pnp 00:09: [io  0x0500-0x057f]
    [    0.405556] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [    0.405559] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [    0.405561] pnp 00:09: [mem 0xfed40000-0xfed8ffff]
    [    0.405621] system 00:09: [io  0x04d0-0x04d1] has been reserved
    [    0.405623] system 00:09: [io  0x0800-0x087f] has been reserved
    [    0.405626] system 00:09: [io  0x0500-0x057f] has been reserved
    [    0.405629] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.405632] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.405635] system 00:09: [mem 0xfed40000-0xfed8ffff] has been reserved
    [    0.405638] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.405692] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
    [    0.405723] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.405771] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
    [    0.405774] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [    0.405808] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.405847] pnp 00:0c: [mem 0xffc00000-0xffefffff]
    [    0.405896] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
    [    0.405899] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.405977] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
    [    0.405979] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
    [    0.406030] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.406033] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.406036] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.406080] pnp 00:0e: [mem 0xe0000000-0xefffffff]
    [    0.406127] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.406131] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.406305] pnp 00:0f: [mem 0x00000000-0x0009ffff]
    [    0.406308] pnp 00:0f: [mem 0x000c0000-0x000cffff]
    [    0.406310] pnp 00:0f: [mem 0x000e0000-0x000fffff]
    [    0.406313] pnp 00:0f: [mem 0x00100000-0xbfffffff]
    [    0.406315] pnp 00:0f: [mem 0xfed90000-0xffffffff]
    [    0.406374] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.406377] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
    [    0.406380] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.406382] system 00:0f: [mem 0x00100000-0xbfffffff] could not be reserved
    [    0.406385] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
    [    0.406388] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.406517] pnp: PnP ACPI: found 16 devices
    [    0.406518] ACPI: ACPI bus type pnp unregistered
    [    0.406522] PnPBIOS: Disabled by ACPI PNP
    [    0.444593] PCI: max bus depth: 1 pci_try_num: 2
    [    0.444624] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.444628] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.444631] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.444635] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.444638] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.444642] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.444645] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.444650] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.444654] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.444659] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [    0.444686] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.444691] pci 0000:00:01.0: setting latency timer to 64
    [    0.444701] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.444705] pci 0000:00:1c.0: setting latency timer to 64
    [    0.444712] pci 0000:00:1e.0: setting latency timer to 64
    [    0.444715] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.444718] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.444720] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.444723] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.444725] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.444727] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.444730] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
    [    0.444732] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [    0.444735] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.444737] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
    [    0.444740] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [    0.444742] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.444745] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
    [    0.444747] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
    [    0.444750] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.444752] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.444755] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.444757] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.444797] NET: Registered protocol family 2
    [    0.444867] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.445082] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.445418] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.445585] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.445588] TCP reno registered
    [    0.445591] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.445599] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.445685] NET: Registered protocol family 1
    [    0.445714] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.445731] pci 0000:00:1a.0: PCI INT A disabled
    [    0.445746] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.445761] pci 0000:00:1a.1: PCI INT B disabled
    [    0.445771] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.445785] pci 0000:00:1a.2: PCI INT D disabled
    [    0.445796] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.445826] pci 0000:00:1a.7: PCI INT C disabled
    [    0.445840] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.445855] pci 0000:00:1d.0: PCI INT A disabled
    [    0.445862] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.445877] pci 0000:00:1d.1: PCI INT B disabled
    [    0.445884] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.445899] pci 0000:00:1d.2: PCI INT C disabled
    [    0.445907] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.445920] pci 0000:00:1d.7: PCI INT A disabled
    [    0.445933] pci 0000:01:00.0: Boot video device
    [    0.445941] PCI: CLS 32 bytes, default 64
    [    0.446427] audit: initializing netlink socket (disabled)
    [    0.446435] type=2000 audit(1350806831.440:1): initialized
    [    0.467415] highmem bounce pool size: 64 pages
    [    0.467420] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.470050] VFS: Disk quotas dquot_6.5.2
    [    0.470112] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.470699] fuse init (API version 7.17)
    [    0.470809] msgmni has been set to 1565
    [    0.471357] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.471392] io scheduler noop registered
    [    0.471399] io scheduler deadline registered
    [    0.471411] io scheduler cfq registered (default)
    [    0.471520] pcieport 0000:00:01.0: setting latency timer to 64
    [    0.471550] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [    0.471598] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.471632] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [    0.471710] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.471735] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.471797] intel_idle: MWAIT substates: 0x20
    [    0.471798] intel_idle: does not run on family 6 model 23
    [    0.471882] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.471887] ACPI: Power Button [PWRB]
    [    0.471933] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.471936] ACPI: Power Button [PWRF]
    [    0.474594] ERST: Table is not found!
    [    0.474596] GHES: HEST is not enabled!
    [    0.474696] isapnp: Scanning for PnP cards...
    [    0.474727] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    0.633794] Freeing initrd memory: 13832k freed
    [    0.827591] isapnp: No Plug & Play device found
    [    0.880586] Linux agpgart interface v0.103
    [    0.882714] brd: module loaded
    [    0.883740] loop: module loaded
    [    0.883878] ahci 0000:00:1f.2: version 3.0
    [    0.883891] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.883929] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [    0.883974] ahci: SSS flag set, parallel bus scan disabled
    [    0.884015] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [    0.884019] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
    [    0.884023] ahci 0000:00:1f.2: setting latency timer to 64
    [    0.924625] scsi0 : ahci
    [    0.924743] scsi1 : ahci
    [    0.924848] scsi2 : ahci
    [    0.924939] scsi3 : ahci
    [    0.925055] scsi4 : ahci
    [    0.925162] scsi5 : ahci
    [    0.925333] ata1: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4100 irq 42
    [    0.925336] ata2: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4180 irq 42
    [    0.925339] ata3: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4200 irq 42
    [    0.925341] ata4: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4280 irq 42
    [    0.925344] ata5: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4300 irq 42
    [    0.925347] ata6: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4380 irq 42
    [    0.925778] Fixed MDIO Bus: probed
    [    0.925799] tun: Universal TUN/TAP device driver, 1.6
    [    0.925801] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.925878] PPP generic driver version 2.4.2
    [    0.926037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.926054] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.926067] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    0.926070] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    0.926139] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    0.926161] ehci_hcd 0000:00:1a.7: debug port 1
    [    0.930031] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [    0.930046] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9dc000
    [    0.944015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [    0.944178] hub 1-0:1.0: USB hub found
    [    0.944182] hub 1-0:1.0: 6 ports detected
    [    0.944258] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.944268] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.944271] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.944336] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    0.944358] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.948254] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    0.948267] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9d6000
    [    0.964014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.964155] hub 2-0:1.0: USB hub found
    [    0.964159] hub 2-0:1.0: 6 ports detected
    [    0.964232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.964245] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.964261] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.964268] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [    0.964271] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    0.964337] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    0.964366] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
    [    0.964513] hub 3-0:1.0: USB hub found
    [    0.964517] hub 3-0:1.0: 2 ports detected
    [    0.964579] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.964587] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    0.964590] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    0.964657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    0.964688] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
    [    0.964836] hub 4-0:1.0: USB hub found
    [    0.964840] hub 4-0:1.0: 2 ports detected
    [    0.964908] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.964914] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [    0.964917] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [    0.964983] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [    0.965012] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
    [    0.965158] hub 5-0:1.0: USB hub found
    [    0.965161] hub 5-0:1.0: 2 ports detected
    [    0.965221] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.965227] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.965230] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.965297] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [    0.965318] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
    [    0.965466] hub 6-0:1.0: USB hub found
    [    0.965469] hub 6-0:1.0: 2 ports detected
    [    0.965531] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.965538] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.965541] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.965607] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [    0.965628] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
    [    0.965774] hub 7-0:1.0: USB hub found
    [    0.965778] hub 7-0:1.0: 2 ports detected
    [    0.965841] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.965848] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.965851] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.965919] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [    0.965939] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
    [    0.966085] hub 8-0:1.0: USB hub found
    [    0.966089] hub 8-0:1.0: 2 ports detected
    [    0.966203] usbcore: registered new interface driver libusual
    [    0.966261] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [    0.966621] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.966628] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.966789] mousedev: PS/2 mouse device common for all mice
    [    0.967002] rtc_cmos 00:03: RTC can wake from S4
    [    0.967124] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    0.967146] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    0.967204] device-mapper: uevent: version 1.0.3
    [    0.967302] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    [    0.967333] EISA: Probing bus 0 at eisa.0
    [    0.967335] EISA: Cannot allocate resource for mainboard
    [    0.967338] Cannot allocate resource for EISA slot 1
    [    0.967339] Cannot allocate resource for EISA slot 2
    [    0.967341] Cannot allocate resource for EISA slot 3
    [    0.967343] Cannot allocate resource for EISA slot 4
    [    0.967345] Cannot allocate resource for EISA slot 5
    [    0.967346] Cannot allocate resource for EISA slot 6
    [    0.967348] Cannot allocate resource for EISA slot 7
    [    0.967350] Cannot allocate resource for EISA slot 8
    [    0.967352] EISA: Detected 0 cards.
    [    0.967360] cpufreq-nforce2: No nForce2 chipset.
    [    0.967363] cpuidle: using governor ladder
    [    0.967365] cpuidle: using governor menu
    [    0.967366] EFI Variables Facility v0.08 2004-May-17
    [    0.967627] TCP cubic registered
    [    0.967754] NET: Registered protocol family 10
    [    0.968322] NET: Registered protocol family 17
    [    0.968327] Registering the dns_resolver key type
    [    0.968346] Using IPI No-Shortcut mode
    [    0.968506] PM: Hibernation image not present or could not be loaded.
    [    0.968518] registered taskstats version 1
    [    0.975453]   Magic number: 0:514:119
    [    0.975552] rtc_cmos 00:03: setting system clock to 2012-10-21 08:07:12 UTC (1350806832)
    [    0.976603] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.976605] EDD information not available.
    [    0.982903] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.244020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.247035] ata1.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
    [    1.250909] ata1.00: configured for UDMA/100
    [    1.256016] usb 1-4: new high-speed USB device number 2 using ehci_hcd
    [    1.258547] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH40F     MG01 PQ: 0 ANSI: 5
    [    1.267019] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.267023] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.267162] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    1.267239] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    1.444015] Refined TSC clocksource calibration: 2327.754 MHz.
    [    1.444020] Switching to clocksource tsc
    [    1.572012] usb 2-3: new high-speed USB device number 2 using ehci_hcd
    [    1.584017] ata2: SATA link down (SStatus 0 SControl 300)
    [    1.708224] Initializing USB Mass Storage driver...
    [    1.708385] scsi6 : usb-storage 2-3:1.0
    [    1.708467] usbcore: registered new interface driver usb-storage
    [    1.708469] USB Mass Storage support registered.
    [    1.904014] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.944012] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [    2.224015] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    2.237691] ata4.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
    [    2.237695] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [    2.238712] ata4.00: configured for UDMA/133
    [    2.238837] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
    [    2.238983] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    2.238999] sd 3:0:0:0: Attached scsi generic sg1 type 0
    [    2.239054] sd 3:0:0:0: [sda] Write Protect is off
    [    2.239057] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.239088] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.281580]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    2.281984] sd 3:0:0:0: [sda] Attached SCSI disk
    [    2.556014] ata5: SATA link down (SStatus 0 SControl 300)
    [    2.708731] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
    [    2.709346] scsi 6:0:0:1: Direct-Access     Multiple Flash Reader     1.05 PQ: 0 ANSI: 0
    [    2.710137] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [    2.710284] sd 6:0:0:1: Attached scsi generic sg3 type 0
    [    2.713828] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [    2.714579] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [    2.876014] ata6: SATA link down (SStatus 0 SControl 300)
    [    2.876104] Freeing unused kernel memory: 740k freed
    [    2.876361] Write protecting the kernel text: 5824k
    [    2.876390] Write protecting the kernel read-only data: 2376k
    [    2.876392] NX-protecting the kernel data: 4416k
    [    2.893320] udevd[113]: starting version 175
    [    2.923318] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
    [    2.923321] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [    2.923364] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    2.923374] e1000e 0000:00:19.0: setting latency timer to 64
    [    2.923473] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [    2.924649] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.924657] firewire_ohci 0000:02:00.0: setting latency timer to 64
    [    2.931691] generic-usb 0003:058F:6363.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.7-3/input1
    [    2.946556] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
    [    2.946749] generic-usb 0003:046D:C51B.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-1/input0
    [    2.960142] generic-usb 0003:046D:C51B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input1
    [    2.960167] usbcore: registered new interface driver usbhid
    [    2.960169] usbhid: USB HID core driver
    [    2.988049] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
    [    3.110403] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:f4:ca:94
    [    3.110407] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [    3.110429] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
    [    3.345506] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
    [    3.345509] EXT4-fs (sda6): write access will be enabled during recovery
    [    3.488107] firewire_core: created device fw0: GUID 001d72ffae924fff, S400
    [    4.982885] EXT4-fs (sda6): recovery complete
    [    4.983211] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [   16.153896] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   16.186353] udevd[358]: starting version 175
    [   16.239207] Adding 9068540k swap on /dev/sda5.  Priority:-1 extents:1 across:9068540k 
    [   16.239586] lp: driver loaded but no devices found
    [   16.240442] [drm] Initialized drm 1.1.0 20060810
    [   16.259772] cfg80211: Calling CRDA to update world regulatory domain
    [   16.259868] type=1400 audit(1350799647.777:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=461 comm="apparmor_parser"
    [   16.260328] type=1400 audit(1350799647.781:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"
    [   16.260573] type=1400 audit(1350799647.781:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
    [   16.266680] [drm] radeon defaulting to kernel modesetting.
    [   16.266684] [drm] radeon kernel modesetting enabled.
    [   16.266747] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   16.266753] radeon 0000:01:00.0: setting latency timer to 64
    [   16.279922] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x174B:0xE990).
    [   16.279953] [drm] register mmio base: 0xFEAF0000
    [   16.279955] [drm] register mmio size: 65536
    [   16.280111] ATOM BIOS: 11X
    [   16.280142] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [   16.280145] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [   16.282200] [drm] Detected VRAM RAM=512M, BAR=256M
    [   16.282205] [drm] RAM width 64bits DDR
    [   16.284844] [TTM] Zone  kernel: Available graphics memory: 408100 kiB.
    [   16.284847] [TTM] Zone highmem: Available graphics memory: 3096904 kiB.
    [   16.284849] [TTM] Initializing pool allocator.
    [   16.284870] [drm] radeon: 512M of VRAM memory ready
    [   16.284872] [drm] radeon: 512M of GTT memory ready.
    [   16.284891] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   16.284893] [drm] Driver supports precise vblank timestamp query.
    [   16.284935] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [   16.284940] radeon 0000:01:00.0: radeon: using MSI.
    [   16.284970] [drm] radeon: irq initialized.
    [   16.284974] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [   16.285836] [drm] Loading RV710 Microcode
    [   16.311054] wmi: Mapper loaded
    [   16.334828] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   16.334876] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [   16.334899] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [   16.413246] cfg80211: World regulatory domain updated:
    [   16.413249] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   16.413252] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.413255] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   16.413258] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   16.413260] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.413263] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.420031] usb 1-4: reset high-speed USB device number 2 using ehci_hcd
    [   16.435711] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [   16.435761] radeon 0000:01:00.0: WB enabled
    [   16.481706] [drm] ring test succeeded in 1 usecs
    [   16.481848] [drm] radeon: ib pool ready.
    [   16.481921] [drm] ib test succeeded in 0 usecs
    [   16.482279] [drm] Radeon Display Connectors
    [   16.482281] [drm] Connector 0:
    [   16.482283] [drm]   VGA
    [   16.482285] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [   16.482287] [drm]   Encoders:
    [   16.482288] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
    [   16.482290] [drm] Connector 1:
    [   16.482291] [drm]   HDMI-A
    [   16.482293] [drm]   HPD1
    [   16.482295] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [   16.482296] [drm]   Encoders:
    [   16.482298] [drm]     DFP1: INTERNAL_UNIPHY
    [   16.482299] [drm] Connector 2:
    [   16.482301] [drm]   DVI-I
    [   16.482302] [drm]   HPD4
    [   16.482304] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
    [   16.482306] [drm]   Encoders:
    [   16.482307] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
    [   16.482309] [drm]     DFP2: INTERNAL_UNIPHY2
    [   16.482327] [drm] Internal thermal controller with fan control
    [   16.482368] [drm] radeon: power management initialized
    [   16.556826] [drm] fb mappable at 0xD0142000
    [   16.556828] [drm] vram apper at 0xD0000000
    [   16.556829] [drm] size 5242880
    [   16.556831] [drm] fb depth is 24
    [   16.556832] [drm]    pitch is 5120
    [   16.556932] fbcon: radeondrmfb (fb0) is primary device
    [   16.557017] Console: switching to colour frame buffer device 160x64
    [   16.557051] fb0: radeondrmfb frame buffer device
    [   16.557052] drm: registered panic notifier
    [   16.557057] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
    [   16.591910] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591914] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591917] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591919] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591922] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591924] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591926] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591929] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591931] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591934] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591936] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591939] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591941] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591944] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591946] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591948] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591951] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591953] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591956] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591958] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591960] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591963] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591965] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591968] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   16.591970] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591973] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   16.591975] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591978] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   16.594435] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   16.595067] Registered led device: rt2800usb-phy0::radio
    [   16.595089] Registered led device: rt2800usb-phy0::assoc
    [   16.595112] Registered led device: rt2800usb-phy0::quality
    [   16.595142] usbcore: registered new interface driver rt2800usb
    [   17.000484] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
    [   17.091927] init: failsafe main process (778) killed by TERM signal
    [   17.121892] Bluetooth: Core ver 2.16
    [   17.121917] NET: Registered protocol family 31
    [   17.121919] Bluetooth: HCI device and connection manager initialized
    [   17.121922] Bluetooth: HCI socket layer initialized
    [   17.121924] Bluetooth: L2CAP socket layer initialized
    [   17.121930] Bluetooth: SCO socket layer initialized
    [   17.124803] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   17.124806] Bluetooth: BNEP filters: protocol multicast
    [   17.125175] Bluetooth: RFCOMM TTY layer initialized
    [   17.125181] Bluetooth: RFCOMM socket layer initialized
    [   17.125183] Bluetooth: RFCOMM ver 1.11
    [   17.163541] ppdev: user-space parallel port driver
    [   17.176598] type=1400 audit(1350799648.697:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=853 comm="apparmor_parser"
    [   17.177121] type=1400 audit(1350799648.697:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=853 comm="apparmor_parser"
    [   17.280237] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   17.283846] type=1400 audit(1350799648.801:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=885 comm="apparmor_parser"
    [   17.286077] type=1400 audit(1350799648.805:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=886 comm="apparmor_parser"
    [   17.286197] type=1400 audit(1350799648.805:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=889 comm="apparmor_parser"
    [   17.286530] type=1400 audit(1350799648.805:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=886 comm="apparmor_parser"
    [   17.286774] type=1400 audit(1350799648.805:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=886 comm="apparmor_parser"
    [   17.336070] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   17.336302] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   17.336678] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   17.405887] init: alsa-restore main process (931) terminated with status 19
    [   17.552162] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   17.552410] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   19.380018] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
    [   20.388061] hda-intel: No response from codec, disabling MSI: last cmd=0x300f0000
    [   20.864236] wlan0: authenticate with 00:1a:2b:13:ba:89 (try 1)
    [   20.865756] wlan0: authenticated
    [   20.920234] wlan0: associate with 00:1a:2b:13:ba:89 (try 1)
    [   20.922124] wlan0: RX AssocResp from 00:1a:2b:13:ba:89 (capab=0x411 status=0 aid=1)
    [   20.922128] wlan0: associated
    [   20.930399] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   21.396071] hda-intel: Codec #3 probe error; disabling it...
    [   21.443165] hda_codec: ALC888: BIOS auto-probing.
    [   21.452350] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
    [   21.452529] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [   21.452683] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [   21.452838] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [   21.452991] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [   21.453162] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [   21.453328] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [   21.454962] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [   21.456277] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
    [   21.456310] snd_hda_intel 0000:01:00.1: setting latency timer to 64
    [   21.480812] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
    [   21.480995] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [   21.659007] init: plymouth-stop pre-start process (1556) terminated with status 1
    [   30.960011] wlan0: no IPv6 routers present
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.2.0-32-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:54:23 UTC 2012 (Ubuntu 3.2.0-32.51-generic-pae 3.2.30)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
    [    0.000000]  BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01100 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed02000 - 00000000fed14c00 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI present.
    [    0.000000] DMI: Acer Aspire X3810/WG43M, BIOS P01-A3 05/26/2009
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x1000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-DFFFF uncachable
    [    0.000000]   E0000-EFFFF write-through
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 1C0000000 mask FC0000000 uncachable
    [    0.000000]   1 base 000000000 mask E00000000 write-back
    [    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] original variable MTRRs
    [    0.000000] reg 0, base: 7GB, range: 1GB, type UC
    [    0.000000] reg 1, base: 0GB, range: 8GB, type WB
    [    0.000000] reg 2, base: 3GB, range: 1GB, type UC
    [    0.000000] total RAM covered: 6144M
    [    0.000000] Found optimal setting for mtrr clean up
    [    0.000000]  gran_size: 64K     chunk_size: 64K     num_reg: 4      lose cover RAM: 0G
    [    0.000000] New variable MTRRs
    [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
    [    0.000000] reg 2, base: 4GB, range: 2GB, type WB
    [    0.000000] reg 3, base: 6GB, range: 1GB, type WB
    [    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] found SMP MP-table at [c00ff780] ff780
    [    0.000000] initial memory mapped : 0 - 02000000
    [    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
    [    0.000000]  0000000000 - 0000200000 page 4k
    [    0.000000]  0000200000 - 0037a00000 page 2M
    [    0.000000]  0037a00000 - 0037bfe000 page 4k
    [    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
    [    0.000000] RAMDISK: 364ec000 - 3726e000
    [    0.000000] ACPI: RSDP 000fa770 00024 (v02 ACPIAM)
    [    0.000000] ACPI: XSDT bff90100 0006C (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: FACP bff90290 000F4 (v04 052609 FACP2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: DSDT bff905c0 061D5 (v02   P01-   P01-A3 000000A3 INTL 20051117)
    [    0.000000] ACPI: FACS bff9e000 00040
    [    0.000000] ACPI: APIC bff90390 0006C (v02 052609 APIC2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: MCFG bff90400 0003C (v01 052609 OEMMCFG  20090526 MSFT 00000097)
    [    0.000000] ACPI: SLIC bff90440 00176 (v01 ACRSYS ACRPRDCT 20090526 MSFT 00000097)
    [    0.000000] ACPI: OEMB bff9e040 00072 (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: HPET bff9a5c0 00038 (v01 052609 OEMHPET  20090526 MSFT 00000097)
    [    0.000000] ACPI: GSCI bff9e0c0 02024 (v01 052609 GMCHSCI  20090526 MSFT 00000097)
    [    0.000000] ACPI: AWMI bffa00f0 0004E (v01 052609 OEMB2056 20090526 MSFT 00000097)
    [    0.000000] ACPI: SSDT bffa0940 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 6276MB HIGHMEM available.
    [    0.000000] 891MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 37bfe000
    [    0.000000]   low ram: 0 - 37bfe000
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x00037bfe
    [    0.000000]   HighMem  0x00037bfe -> 0x001c0000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009e
    [    0.000000]     0: 0x00000100 -> 0x000bff90
    [    0.000000]     0: 0x00100000 -> 0x001c0000
    [    0.000000] On node 0 totalpages: 1572638
    [    0.000000] free_area_init_node: node 0, pgdat c1868a80, node_mem_map f2cec200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3950 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1752 pages used for memmap
    [    0.000000]   Normal zone: 222502 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 12553 pages used for memmap
    [    0.000000]   HighMem zone: 1331849 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34240 r0 d23104 u57344
    [    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1558301
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic-pae root=UUID=3169b696-02b9-4593-b5f7-30c72e816dc7 ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 29359872 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00037bfe:001c0000)
    [    0.000000] Memory: 6179236k/7340032k available (5820k kernel code, 111316k reserved, 2844k data, 740k init, 5377608k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    [    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    [    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
    [    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
    [    0.000000]       .data : 0xc15af13c - 0xc1876280   (2844 kB)
    [    0.000000]       .text : 0xc1000000 - 0xc15af13c   (5820 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:2304 nr_irqs:712 16
    [    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2327.825 MHz processor.
    [    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.65 BogoMIPS (lpj=9311300)
    [    0.004006] pid_max: default: 32768 minimum: 301
    [    0.004026] Security Framework initialized
    [    0.004041] AppArmor: AppArmor initialized
    [    0.004043] Yama: becoming mindful.
    [    0.004094] Mount-cache hash table entries: 512
    [    0.004218] Initializing cgroup subsys cpuacct
    [    0.004224] Initializing cgroup subsys memory
    [    0.004232] Initializing cgroup subsys devices
    [    0.004234] Initializing cgroup subsys freezer
    [    0.004236] Initializing cgroup subsys blkio
    [    0.004241] Initializing cgroup subsys perf_event
    [    0.004266] CPU: Physical Processor ID: 0
    [    0.004268] CPU: Processor Core ID: 0
    [    0.004271] mce: CPU supports 6 MCE banks
    [    0.004279] CPU0: Thermal monitoring enabled (TM2)
    [    0.004282] using mwait in idle threads.
    [    0.009934] ACPI: Core revision 20110623
    [    0.016011] ftrace: allocating 26564 entries in 52 pages
    [    0.020043] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.020397] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.062722] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
    [    0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [    0.064003] ... version:                2
    [    0.064003] ... bit width:              40
    [    0.064003] ... generic registers:      2
    [    0.064003] ... value mask:             000000ffffffffff
    [    0.064003] ... max period:             000000007fffffff
    [    0.064003] ... fixed-purpose events:   3
    [    0.064003] ... event mask:             0000000700000003
    [    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.064003] CPU 1 irqstacks, hard=f7512000 soft=f7514000
    [    0.064003] Booting Node   0, Processors  #1
    [    0.064003] smpboot cpu 1: start_ip = 9a000
    [    0.008000] Initializing CPU#1
    [    0.156032] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.156125] CPU 2 irqstacks, hard=f7520000 soft=f7522000
    [    0.156127]  #2
    [    0.156128] smpboot cpu 2: start_ip = 9a000
    [    0.008000] Initializing CPU#2
    [    0.248031] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.248117] CPU 3 irqstacks, hard=f752e000 soft=f7538000
    [    0.248119]  #3 Ok.
    [    0.248120] smpboot cpu 3: start_ip = 9a000
    [    0.008000] Initializing CPU#3
    [    0.344037] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.344060] Brought up 4 CPUs
    [    0.344063] Total of 4 processors activated (18622.14 BogoMIPS).
    [    0.347008] devtmpfs: initialized
    [    0.347008] EVM: security.selinux
    [    0.347008] EVM: security.SMACK64
    [    0.347008] EVM: security.capability
    [    0.347008] PM: Registering ACPI NVS region at bff9e000 (270336 bytes)
    [    0.348572] print_constraints: dummy: 
    [    0.348599] RTC time:  8:07:11, date: 10/21/12
    [    0.348636] NET: Registered protocol family 16
    [    0.348645] Trying to unpack rootfs image as initramfs...
    [    0.348764] EISA bus registered
    [    0.348792] ACPI: bus type pci registered
    [    0.348854] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.348857] PCI: not using MMCONFIG
    [    0.348933] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
    [    0.348993] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
    [    0.348994] PCI: Using configuration type 1 for base access
    [    0.350091] bio: create slab <bio-0> at 0
    [    0.350091] ACPI: Added _OSI(Module Device)
    [    0.350091] ACPI: Added _OSI(Processor Device)
    [    0.350091] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.350091] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.350091] ACPI: EC: Look up EC in DSDT
    [    0.352970] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.355656] ACPI: SSDT bffa0140 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.355965] ACPI: Dynamic OEM Table Load:
    [    0.355968] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
    [    0.356258] ACPI: SSDT bffa0340 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.356568] ACPI: Dynamic OEM Table Load:
    [    0.356571] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
    [    0.356847] ACPI: SSDT bffa0540 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.357158] ACPI: Dynamic OEM Table Load:
    [    0.357161] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
    [    0.357430] ACPI: SSDT bffa0740 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.357742] ACPI: Dynamic OEM Table Load:
    [    0.357745] ACPI: SSDT   (null) 001F3 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
    [    0.357932] ACPI: Interpreter enabled
    [    0.357938] ACPI: (supports S0 S3 S4 S5)
    [    0.357958] ACPI: Using IOAPIC for interrupt routing
    [    0.357983] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.359172] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [    0.359174] PCI: Using MMCONFIG for extended config space
    [    0.364655] ACPI: No dock devices found.
    [    0.364659] HEST: Table not found.
    [    0.364663] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.364749] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.364926] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
    [    0.364929] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
    [    0.364931] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.364934] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [    0.364936] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [    0.364939] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
    [    0.364953] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [    0.364994] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [    0.365032] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [    0.365035] pci 0000:00:01.0: PME# disabled
    [    0.365074] pci 0000:00:19.0: [8086:10ce] type 0 class 0x000200
    [    0.365091] pci 0000:00:19.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
    [    0.365100] pci 0000:00:19.0: reg 14: [mem 0xfe9de000-0xfe9defff]
    [    0.365108] pci 0000:00:19.0: reg 18: [io  0xcc00-0xcc1f]
    [    0.365166] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [    0.365170] pci 0000:00:19.0: PME# disabled
    [    0.365188] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [    0.365229] pci 0000:00:1a.0: reg 20: [io  0xc880-0xc89f]
    [    0.365277] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [    0.365316] pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
    [    0.365364] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [    0.365403] pci 0000:00:1a.2: reg 20: [io  0xc480-0xc49f]
    [    0.365461] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [    0.365481] pci 0000:00:1a.7: reg 10: [mem 0xfe9dc000-0xfe9dc3ff]
    [    0.365565] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [    0.365570] pci 0000:00:1a.7: PME# disabled
    [    0.365592] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [    0.365606] pci 0000:00:1b.0: reg 10: [mem 0xfe9d8000-0xfe9dbfff 64bit]
    [    0.365669] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.365673] pci 0000:00:1b.0: PME# disabled
    [    0.365691] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [    0.365760] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.365764] pci 0000:00:1c.0: PME# disabled
    [    0.365789] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [    0.365829] pci 0000:00:1d.0: reg 20: [io  0xc400-0xc41f]
    [    0.365876] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [    0.365917] pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
    [    0.365965] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [    0.366004] pci 0000:00:1d.2: reg 20: [io  0xc000-0xc01f]
    [    0.366063] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [    0.366083] pci 0000:00:1d.7: reg 10: [mem 0xfe9d6000-0xfe9d63ff]
    [    0.366167] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.366172] pci 0000:00:1d.7: PME# disabled
    [    0.366191] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [    0.366250] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
    [    0.366363] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
    [    0.366380] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
    [    0.366388] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
    [    0.366395] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
    [    0.366403] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
    [    0.366411] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb41f]
    [    0.366418] pci 0000:00:1f.2: reg 24: [mem 0xfe9d4000-0xfe9d47ff]
    [    0.366461] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.366465] pci 0000:00:1f.2: PME# disabled
    [    0.366480] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [    0.366494] pci 0000:00:1f.3: reg 10: [mem 0xfe9d3c00-0xfe9d3cff 64bit]
    [    0.366514] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
    [    0.366570] pci 0000:01:00.0: [1002:954f] type 0 class 0x000300
    [    0.366584] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.366595] pci 0000:01:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff 64bit]
    [    0.366602] pci 0000:01:00.0: reg 20: [io  0xd000-0xd0ff]
    [    0.366617] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
    [    0.366647] pci 0000:01:00.0: supports D1 D2
    [    0.366666] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
    [    0.366680] pci 0000:01:00.1: reg 10: [mem 0xfeaec000-0xfeaeffff 64bit]
    [    0.366736] pci 0000:01:00.1: supports D1 D2
    [    0.366765] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.366768] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.366772] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.366776] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.366831] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
    [    0.366853] pci 0000:02:00.0: reg 10: [mem 0xfebff800-0xfebfffff 64bit]
    [    0.366866] pci 0000:02:00.0: reg 18: [io  0xe800-0xe8ff]
    [    0.366959] pci 0000:02:00.0: supports D2
    [    0.366961] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
    [    0.366966] pci 0000:02:00.0: PME# disabled
    [    0.372042] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.372046] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.372050] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.372123] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [    0.372137] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.372143] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.372145] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.372148] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [    0.372150] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [    0.372153] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
    [    0.372166] pci_bus 0000:00: on NUMA node 0
    [    0.372170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.372376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [    0.372427]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.372430]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.372432] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.381191] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
    [    0.381240] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
    [    0.381283] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
    [    0.381329] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
    [    0.381376] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15)
    [    0.381422] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
    [    0.381469] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
    [    0.381515] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
    [    0.381626] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.381626] vgaarb: loaded
    [    0.381626] vgaarb: bridge control possible 0000:01:00.0
    [    0.381626] i2c-core: driver [aat2870] using legacy suspend method
    [    0.381626] i2c-core: driver [aat2870] using legacy resume method
    [    0.381626] SCSI subsystem initialized
    [    0.381626] libata version 3.00 loaded.
    [    0.381626] usbcore: registered new interface driver usbfs
    [    0.381626] usbcore: registered new interface driver hub
    [    0.381626] usbcore: registered new device driver usb
    [    0.381626] PCI: Using ACPI for IRQ routing
    [    0.381626] PCI: pci_cache_line_size set to 64 bytes
    [    0.381626] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
    [    0.381626] reserve RAM buffer: 00000000bff90000 - 00000000bfffffff 
    [    0.381626] NetLabel: Initializing
    [    0.381626] NetLabel:  domain hash size = 128
    [    0.381626] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.381626] NetLabel:  unlabeled traffic allowed by default
    [    0.381626] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [    0.381626] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [    0.381626] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [    0.396145] Switching to clocksource hpet
    [    0.404296] AppArmor: AppArmor Filesystem Enabled
    [    0.404325] pnp: PnP ACPI init
    [    0.404342] ACPI: bus type pnp registered
    [    0.404459] pnp 00:00: [bus 00-ff]
    [    0.404461] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.404464] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.404466] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.404469] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.404471] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [    0.404474] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [    0.404476] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
    [    0.404533] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.404543] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [    0.404545] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [    0.404600] system 00:01: [mem 0xfed14000-0xfed19fff] could not be reserved
    [    0.404603] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [    0.404607] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.404641] pnp 00:02: [dma 4]
    [    0.404644] pnp 00:02: [io  0x0000-0x000f]
    [    0.404646] pnp 00:02: [io  0x0081-0x0083]
    [    0.404648] pnp 00:02: [io  0x0087]
    [    0.404650] pnp 00:02: [io  0x0089-0x008b]
    [    0.404652] pnp 00:02: [io  0x008f]
    [    0.404653] pnp 00:02: [io  0x00c0-0x00df]
    [    0.404680] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.404691] pnp 00:03: [io  0x0070-0x0071]
    [    0.404702] pnp 00:03: [irq 8]
    [    0.404731] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.404759] pnp 00:04: [io  0x0060]
    [    0.404762] pnp 00:04: [io  0x0064]
    [    0.404767] pnp 00:04: [irq 1]
    [    0.404795] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.404839] pnp 00:05: [irq 12]
    [    0.404867] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [    0.404877] pnp 00:06: [io  0x0061]
    [    0.404906] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.404915] pnp 00:07: [io  0x00f0-0x00ff]
    [    0.404920] pnp 00:07: [irq 13]
    [    0.404948] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.405339] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
    [    0.405342] pnp 00:08: [io  0x0a00-0x0a0f]
    [    0.405344] pnp 00:08: [io  0x0a10-0x0a1f]
    [    0.405348] pnp 00:08: [io  0x0a20-0x0a2f]
    [    0.405350] pnp 00:08: [io  0x0a30-0x0a3f]
    [    0.405401] system 00:08: [io  0x0a00-0x0a0f] has been reserved
    [    0.405404] system 00:08: [io  0x0a10-0x0a1f] has been reserved
    [    0.405407] system 00:08: [io  0x0a20-0x0a2f] has been reserved
    [    0.405409] system 00:08: [io  0x0a30-0x0a3f] has been reserved
    [    0.405413] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.405521] pnp 00:09: [io  0x0010-0x001f]
    [    0.405524] pnp 00:09: [io  0x0022-0x003f]
    [    0.405526] pnp 00:09: [io  0x0044-0x005f]
    [    0.405528] pnp 00:09: [io  0x0062-0x0063]
    [    0.405530] pnp 00:09: [io  0x0065-0x006f]
    [    0.405532] pnp 00:09: [io  0x0072-0x007f]
    [    0.405534] pnp 00:09: [io  0x0080]
    [    0.405536] pnp 00:09: [io  0x0084-0x0086]
    [    0.405538] pnp 00:09: [io  0x0088]
    [    0.405540] pnp 00:09: [io  0x008c-0x008e]
    [    0.405542] pnp 00:09: [io  0x0090-0x009f]
    [    0.405544] pnp 00:09: [io  0x00a2-0x00bf]
    [    0.405546] pnp 00:09: [io  0x00e0-0x00ef]
    [    0.405548] pnp 00:09: [io  0x04d0-0x04d1]
    [    0.405550] pnp 00:09: [io  0x0800-0x087f]
    [    0.405552] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
    [    0.405554] pnp 00:09: [io  0x0500-0x057f]
    [    0.405556] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [    0.405559] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [    0.405561] pnp 00:09: [mem 0xfed40000-0xfed8ffff]
    [    0.405621] system 00:09: [io  0x04d0-0x04d1] has been reserved
    [    0.405623] system 00:09: [io  0x0800-0x087f] has been reserved
    [    0.405626] system 00:09: [io  0x0500-0x057f] has been reserved
    [    0.405629] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.405632] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.405635] system 00:09: [mem 0xfed40000-0xfed8ffff] has been reserved
    [    0.405638] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.405692] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
    [    0.405723] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.405771] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
    [    0.405774] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [    0.405808] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.405847] pnp 00:0c: [mem 0xffc00000-0xffefffff]
    [    0.405896] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
    [    0.405899] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.405977] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
    [    0.405979] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
    [    0.406030] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.406033] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.406036] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.406080] pnp 00:0e: [mem 0xe0000000-0xefffffff]
    [    0.406127] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.406131] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.406305] pnp 00:0f: [mem 0x00000000-0x0009ffff]
    [    0.406308] pnp 00:0f: [mem 0x000c0000-0x000cffff]
    [    0.406310] pnp 00:0f: [mem 0x000e0000-0x000fffff]
    [    0.406313] pnp 00:0f: [mem 0x00100000-0xbfffffff]
    [    0.406315] pnp 00:0f: [mem 0xfed90000-0xffffffff]
    [    0.406374] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.406377] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
    [    0.406380] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.406382] system 00:0f: [mem 0x00100000-0xbfffffff] could not be reserved
    [    0.406385] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
    [    0.406388] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.406517] pnp: PnP ACPI: found 16 devices
    [    0.406518] ACPI: ACPI bus type pnp unregistered
    [    0.406522] PnPBIOS: Disabled by ACPI PNP
    [    0.444593] PCI: max bus depth: 1 pci_try_num: 2
    [    0.444624] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.444628] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.444631] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.444635] pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.444638] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.444642] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [    0.444645] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
    [    0.444650] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.444654] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.444659] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [    0.444686] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.444691] pci 0000:00:01.0: setting latency timer to 64
    [    0.444701] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.444705] pci 0000:00:1c.0: setting latency timer to 64
    [    0.444712] pci 0000:00:1e.0: setting latency timer to 64
    [    0.444715] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.444718] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.444720] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.444723] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.444725] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.444727] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.444730] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
    [    0.444732] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [    0.444735] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.444737] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
    [    0.444740] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [    0.444742] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
    [    0.444745] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
    [    0.444747] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
    [    0.444750] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.444752] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.444755] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xdfffffff]
    [    0.444757] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff]
    [    0.444797] NET: Registered protocol family 2
    [    0.444867] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.445082] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.445418] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.445585] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.445588] TCP reno registered
    [    0.445591] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.445599] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.445685] NET: Registered protocol family 1
    [    0.445714] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.445731] pci 0000:00:1a.0: PCI INT A disabled
    [    0.445746] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.445761] pci 0000:00:1a.1: PCI INT B disabled
    [    0.445771] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.445785] pci 0000:00:1a.2: PCI INT D disabled
    [    0.445796] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.445826] pci 0000:00:1a.7: PCI INT C disabled
    [    0.445840] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.445855] pci 0000:00:1d.0: PCI INT A disabled
    [    0.445862] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.445877] pci 0000:00:1d.1: PCI INT B disabled
    [    0.445884] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.445899] pci 0000:00:1d.2: PCI INT C disabled
    [    0.445907] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.445920] pci 0000:00:1d.7: PCI INT A disabled
    [    0.445933] pci 0000:01:00.0: Boot video device
    [    0.445941] PCI: CLS 32 bytes, default 64
    [    0.446427] audit: initializing netlink socket (disabled)
    [    0.446435] type=2000 audit(1350806831.440:1): initialized
    [    0.467415] highmem bounce pool size: 64 pages
    [    0.467420] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.470050] VFS: Disk quotas dquot_6.5.2
    [    0.470112] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.470699] fuse init (API version 7.17)
    [    0.470809] msgmni has been set to 1565
    [    0.471357] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.471392] io scheduler noop registered
    [    0.471399] io scheduler deadline registered
    [    0.471411] io scheduler cfq registered (default)
    [    0.471520] pcieport 0000:00:01.0: setting latency timer to 64
    [    0.471550] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [    0.471598] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.471632] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [    0.471710] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.471735] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.471797] intel_idle: MWAIT substates: 0x20
    [    0.471798] intel_idle: does not run on family 6 model 23
    [    0.471882] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.471887] ACPI: Power Button [PWRB]
    [    0.471933] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.471936] ACPI: Power Button [PWRF]
    [    0.474594] ERST: Table is not found!
    [    0.474596] GHES: HEST is not enabled!
    [    0.474696] isapnp: Scanning for PnP cards...
    [    0.474727] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    0.633794] Freeing initrd memory: 13832k freed
    [    0.827591] isapnp: No Plug & Play device found
    [    0.880586] Linux agpgart interface v0.103
    [    0.882714] brd: module loaded
    [    0.883740] loop: module loaded
    [    0.883878] ahci 0000:00:1f.2: version 3.0
    [    0.883891] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.883929] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [    0.883974] ahci: SSS flag set, parallel bus scan disabled
    [    0.884015] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [    0.884019] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
    [    0.884023] ahci 0000:00:1f.2: setting latency timer to 64
    [    0.924625] scsi0 : ahci
    [    0.924743] scsi1 : ahci
    [    0.924848] scsi2 : ahci
    [    0.924939] scsi3 : ahci
    [    0.925055] scsi4 : ahci
    [    0.925162] scsi5 : ahci
    [    0.925333] ata1: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4100 irq 42
    [    0.925336] ata2: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4180 irq 42
    [    0.925339] ata3: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4200 irq 42
    [    0.925341] ata4: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4280 irq 42
    [    0.925344] ata5: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4300 irq 42
    [    0.925347] ata6: SATA max UDMA/133 abar m2048@0xfe9d4000 port 0xfe9d4380 irq 42
    [    0.925778] Fixed MDIO Bus: probed
    [    0.925799] tun: Universal TUN/TAP device driver, 1.6
    [    0.925801] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.925878] PPP generic driver version 2.4.2
    [    0.926037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.926054] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.926067] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    0.926070] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    0.926139] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    0.926161] ehci_hcd 0000:00:1a.7: debug port 1
    [    0.930031] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [    0.930046] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9dc000
    [    0.944015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [    0.944178] hub 1-0:1.0: USB hub found
    [    0.944182] hub 1-0:1.0: 6 ports detected
    [    0.944258] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.944268] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.944271] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.944336] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    0.944358] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.948254] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    0.948267] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9d6000
    [    0.964014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.964155] hub 2-0:1.0: USB hub found
    [    0.964159] hub 2-0:1.0: 6 ports detected
    [    0.964232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.964245] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.964261] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.964268] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [    0.964271] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    0.964337] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    0.964366] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
    [    0.964513] hub 3-0:1.0: USB hub found
    [    0.964517] hub 3-0:1.0: 2 ports detected
    [    0.964579] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.964587] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    0.964590] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    0.964657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    0.964688] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
    [    0.964836] hub 4-0:1.0: USB hub found
    [    0.964840] hub 4-0:1.0: 2 ports detected
    [    0.964908] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.964914] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [    0.964917] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [    0.964983] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [    0.965012] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
    [    0.965158] hub 5-0:1.0: USB hub found
    [    0.965161] hub 5-0:1.0: 2 ports detected
    [    0.965221] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.965227] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.965230] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.965297] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [    0.965318] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
    [    0.965466] hub 6-0:1.0: USB hub found
    [    0.965469] hub 6-0:1.0: 2 ports detected
    [    0.965531] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.965538] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.965541] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.965607] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [    0.965628] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
    [    0.965774] hub 7-0:1.0: USB hub found
    [    0.965778] hub 7-0:1.0: 2 ports detected
    [    0.965841] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.965848] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.965851] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.965919] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [    0.965939] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
    [    0.966085] hub 8-0:1.0: USB hub found
    [    0.966089] hub 8-0:1.0: 2 ports detected
    [    0.966203] usbcore: registered new interface driver libusual
    [    0.966261] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [    0.966621] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.966628] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.966789] mousedev: PS/2 mouse device common for all mice
    [    0.967002] rtc_cmos 00:03: RTC can wake from S4
    [    0.967124] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    0.967146] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    0.967204] device-mapper: uevent: version 1.0.3
    [    0.967302] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    [    0.967333] EISA: Probing bus 0 at eisa.0
    [    0.967335] EISA: Cannot allocate resource for mainboard
    [    0.967338] Cannot allocate resource for EISA slot 1
    [    0.967339] Cannot allocate resource for EISA slot 2
    [    0.967341] Cannot allocate resource for EISA slot 3
    [    0.967343] Cannot allocate resource for EISA slot 4
    [    0.967345] Cannot allocate resource for EISA slot 5
    [    0.967346] Cannot allocate resource for EISA slot 6
    [    0.967348] Cannot allocate resource for EISA slot 7
    [    0.967350] Cannot allocate resource for EISA slot 8
    [    0.967352] EISA: Detected 0 cards.
    [    0.967360] cpufreq-nforce2: No nForce2 chipset.
    [    0.967363] cpuidle: using governor ladder
    [    0.967365] cpuidle: using governor menu
    [    0.967366] EFI Variables Facility v0.08 2004-May-17
    [    0.967627] TCP cubic registered
    [    0.967754] NET: Registered protocol family 10
    [    0.968322] NET: Registered protocol family 17
    [    0.968327] Registering the dns_resolver key type
    [    0.968346] Using IPI No-Shortcut mode
    [    0.968506] PM: Hibernation image not present or could not be loaded.
    [    0.968518] registered taskstats version 1
    [    0.975453]   Magic number: 0:514:119
    [    0.975552] rtc_cmos 00:03: setting system clock to 2012-10-21 08:07:12 UTC (1350806832)
    [    0.976603] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.976605] EDD information not available.
    [    0.982903] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.244020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.247035] ata1.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
    [    1.250909] ata1.00: configured for UDMA/100
    [    1.256016] usb 1-4: new high-speed USB device number 2 using ehci_hcd
    [    1.258547] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH40F     MG01 PQ: 0 ANSI: 5
    [    1.267019] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.267023] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.267162] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    1.267239] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    1.444015] Refined TSC clocksource calibration: 2327.754 MHz.
    [    1.444020] Switching to clocksource tsc
    [    1.572012] usb 2-3: new high-speed USB device number 2 using ehci_hcd
    [    1.584017] ata2: SATA link down (SStatus 0 SControl 300)
    [    1.708224] Initializing USB Mass Storage driver...
    [    1.708385] scsi6 : usb-storage 2-3:1.0
    [    1.708467] usbcore: registered new interface driver usb-storage
    [    1.708469] USB Mass Storage support registered.
    [    1.904014] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.944012] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [    2.224015] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    2.237691] ata4.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
    [    2.237695] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [    2.238712] ata4.00: configured for UDMA/133
    [    2.238837] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
    [    2.238983] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    2.238999] sd 3:0:0:0: Attached scsi generic sg1 type 0
    [    2.239054] sd 3:0:0:0: [sda] Write Protect is off
    [    2.239057] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    2.239088] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    2.281580]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    2.281984] sd 3:0:0:0: [sda] Attached SCSI disk
    [    2.556014] ata5: SATA link down (SStatus 0 SControl 300)
    [    2.708731] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
    [    2.709346] scsi 6:0:0:1: Direct-Access     Multiple Flash Reader     1.05 PQ: 0 ANSI: 0
    [    2.710137] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [    2.710284] sd 6:0:0:1: Attached scsi generic sg3 type 0
    [    2.713828] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [    2.714579] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [    2.876014] ata6: SATA link down (SStatus 0 SControl 300)
    [    2.876104] Freeing unused kernel memory: 740k freed
    [    2.876361] Write protecting the kernel text: 5824k
    [    2.876390] Write protecting the kernel read-only data: 2376k
    [    2.876392] NX-protecting the kernel data: 4416k
    [    2.893320] udevd[113]: starting version 175
    [    2.923318] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
    [    2.923321] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [    2.923364] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    2.923374] e1000e 0000:00:19.0: setting latency timer to 64
    [    2.923473] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [    2.924649] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.924657] firewire_ohci 0000:02:00.0: setting latency timer to 64
    [    2.931691] generic-usb 0003:058F:6363.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.7-3/input1
    [    2.946556] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
    [    2.946749] generic-usb 0003:046D:C51B.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-1/input0
    [    2.960142] generic-usb 0003:046D:C51B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input1
    [    2.960167] usbcore: registered new interface driver usbhid
    [    2.960169] usbhid: USB HID core driver
    [    2.988049] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
    [    3.110403] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:f4:ca:94
    [    3.110407] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [    3.110429] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
    [    3.345506] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
    [    3.345509] EXT4-fs (sda6): write access will be enabled during recovery
    [    3.488107] firewire_core: created device fw0: GUID 001d72ffae924fff, S400
    [    4.982885] EXT4-fs (sda6): recovery complete
    [    4.983211] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [   16.153896] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   16.186353] udevd[358]: starting version 175
    [   16.239207] Adding 9068540k swap on /dev/sda5.  Priority:-1 extents:1 across:9068540k 
    [   16.239586] lp: driver loaded but no devices found
    [   16.240442] [drm] Initialized drm 1.1.0 20060810
    [   16.259772] cfg80211: Calling CRDA to update world regulatory domain
    [   16.259868] type=1400 audit(1350799647.777:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=461 comm="apparmor_parser"
    [   16.260328] type=1400 audit(1350799647.781:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"
    [   16.260573] type=1400 audit(1350799647.781:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
    [   16.266680] [drm] radeon defaulting to kernel modesetting.
    [   16.266684] [drm] radeon kernel modesetting enabled.
    [   16.266747] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   16.266753] radeon 0000:01:00.0: setting latency timer to 64
    [   16.279922] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x174B:0xE990).
    [   16.279953] [drm] register mmio base: 0xFEAF0000
    [   16.279955] [drm] register mmio size: 65536
    [   16.280111] ATOM BIOS: 11X
    [   16.280142] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [   16.280145] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [   16.282200] [drm] Detected VRAM RAM=512M, BAR=256M
    [   16.282205] [drm] RAM width 64bits DDR
    [   16.284844] [TTM] Zone  kernel: Available graphics memory: 408100 kiB.
    [   16.284847] [TTM] Zone highmem: Available graphics memory: 3096904 kiB.
    [   16.284849] [TTM] Initializing pool allocator.
    [   16.284870] [drm] radeon: 512M of VRAM memory ready
    [   16.284872] [drm] radeon: 512M of GTT memory ready.
    [   16.284891] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   16.284893] [drm] Driver supports precise vblank timestamp query.
    [   16.284935] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [   16.284940] radeon 0000:01:00.0: radeon: using MSI.
    [   16.284970] [drm] radeon: irq initialized.
    [   16.284974] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [   16.285836] [drm] Loading RV710 Microcode
    [   16.311054] wmi: Mapper loaded
    [   16.334828] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   16.334876] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [   16.334899] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [   16.413246] cfg80211: World regulatory domain updated:
    [   16.413249] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   16.413252] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.413255] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   16.413258] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   16.413260] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.413263] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.420031] usb 1-4: reset high-speed USB device number 2 using ehci_hcd
    [   16.435711] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [   16.435761] radeon 0000:01:00.0: WB enabled
    [   16.481706] [drm] ring test succeeded in 1 usecs
    [   16.481848] [drm] radeon: ib pool ready.
    [   16.481921] [drm] ib test succeeded in 0 usecs
    [   16.482279] [drm] Radeon Display Connectors
    [   16.482281] [drm] Connector 0:
    [   16.482283] [drm]   VGA
    [   16.482285] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [   16.482287] [drm]   Encoders:
    [   16.482288] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
    [   16.482290] [drm] Connector 1:
    [   16.482291] [drm]   HDMI-A
    [   16.482293] [drm]   HPD1
    [   16.482295] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [   16.482296] [drm]   Encoders:
    [   16.482298] [drm]     DFP1: INTERNAL_UNIPHY
    [   16.482299] [drm] Connector 2:
    [   16.482301] [drm]   DVI-I
    [   16.482302] [drm]   HPD4
    [   16.482304] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
    [   16.482306] [drm]   Encoders:
    [   16.482307] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
    [   16.482309] [drm]     DFP2: INTERNAL_UNIPHY2
    [   16.482327] [drm] Internal thermal controller with fan control
    [   16.482368] [drm] radeon: power management initialized
    [   16.556826] [drm] fb mappable at 0xD0142000
    [   16.556828] [drm] vram apper at 0xD0000000
    [   16.556829] [drm] size 5242880
    [   16.556831] [drm] fb depth is 24
    [   16.556832] [drm]    pitch is 5120
    [   16.556932] fbcon: radeondrmfb (fb0) is primary device
    [   16.557017] Console: switching to colour frame buffer device 160x64
    [   16.557051] fb0: radeondrmfb frame buffer device
    [   16.557052] drm: registered panic notifier
    [   16.557057] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
    [   16.591910] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591914] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591917] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591919] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591922] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591924] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591926] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591929] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591931] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591934] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591936] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591939] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591941] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591944] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591946] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591948] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591951] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591953] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591956] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591958] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591960] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591963] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   16.591965] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591968] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   16.591970] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591973] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   16.591975] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [   16.591978] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   16.594435] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   16.595067] Registered led device: rt2800usb-phy0::radio
    [   16.595089] Registered led device: rt2800usb-phy0::assoc
    [   16.595112] Registered led device: rt2800usb-phy0::quality
    [   16.595142] usbcore: registered new interface driver rt2800usb
    [   17.000484] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
    [   17.091927] init: failsafe main process (778) killed by TERM signal
    [   17.121892] Bluetooth: Core ver 2.16
    [   17.121917] NET: Registered protocol family 31
    [   17.121919] Bluetooth: HCI device and connection manager initialized
    [   17.121922] Bluetooth: HCI socket layer initialized
    [   17.121924] Bluetooth: L2CAP socket layer initialized
    [   17.121930] Bluetooth: SCO socket layer initialized
    [   17.124803] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   17.124806] Bluetooth: BNEP filters: protocol multicast
    [   17.125175] Bluetooth: RFCOMM TTY layer initialized
    [   17.125181] Bluetooth: RFCOMM socket layer initialized
    [   17.125183] Bluetooth: RFCOMM ver 1.11
    [   17.163541] ppdev: user-space parallel port driver
    [   17.176598] type=1400 audit(1350799648.697:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=853 comm="apparmor_parser"
    [   17.177121] type=1400 audit(1350799648.697:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=853 comm="apparmor_parser"
    [   17.280237] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   17.283846] type=1400 audit(1350799648.801:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=885 comm="apparmor_parser"
    [   17.286077] type=1400 audit(1350799648.805:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=886 comm="apparmor_parser"
    [   17.286197] type=1400 audit(1350799648.805:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=889 comm="apparmor_parser"
    [   17.286530] type=1400 audit(1350799648.805:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=886 comm="apparmor_parser"
    [   17.286774] type=1400 audit(1350799648.805:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=886 comm="apparmor_parser"
    [   17.336070] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
    [   17.336302] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   17.336678] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   17.405887] init: alsa-restore main process (931) terminated with status 19
    [   17.552162] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   17.552410] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   19.380018] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
    [   20.388061] hda-intel: No response from codec, disabling MSI: last cmd=0x300f0000
    [   20.864236] wlan0: authenticate with 00:1a:2b:13:ba:89 (try 1)
    [   20.865756] wlan0: authenticated
    [   20.920234] wlan0: associate with 00:1a:2b:13:ba:89 (try 1)
    [   20.922124] wlan0: RX AssocResp from 00:1a:2b:13:ba:89 (capab=0x411 status=0 aid=1)
    [   20.922128] wlan0: associated
    [   20.930399] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   21.396071] hda-intel: Codec #3 probe error; disabling it...
    [   21.443165] hda_codec: ALC888: BIOS auto-probing.
    [   21.452350] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
    [   21.452529] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [   21.452683] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [   21.452838] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [   21.452991] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [   21.453162] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [   21.453328] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [   21.454962] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [   21.456277] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
    [   21.456310] snd_hda_intel 0000:01:00.1: setting latency timer to 64
    [   21.480812] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
    [   21.480995] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [   21.659007] init: plymouth-stop pre-start process (1556) terminated with status 1
    [   30.960011] wlan0: no IPv6 routers present


    and here is the xorg:

    Code:
    [  1080.048] 
    X.Org X Server 1.11.3
    Release Date: 2011-12-16
    [  1080.048] X Protocol Version 11, Revision 0
    [  1080.048] Build Operating System: Linux 2.6.42-26-generic i686 Ubuntu
    [  1080.048] Current Operating System: Linux Compuabajo 3.2.0-32-generic-pae #51-Ubuntu SMP Wed Sep 26 21:54:23 UTC 2012 i686
    [  1080.048] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic-pae root=UUID=3169b696-02b9-4593-b5f7-30c72e816dc7 ro quiet splash vt.handoff=7
    [  1080.048] Build Date: 29 August 2012  12:10:05AM
    [  1080.048] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) 
    [  1080.048] Current version of pixman: 0.24.4
    [  1080.048]     Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    [  1080.048] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [  1080.048] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 21 08:01:46 2012
    [  1080.049] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [  1080.049] (==) No Layout section.  Using the first Screen section.
    [  1080.049] (==) No screen section available. Using defaults.
    [  1080.049] (**) |-->Screen "Default Screen Section" (0)
    [  1080.049] (**) |   |-->Monitor "<default monitor>"
    [  1080.049] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
    [  1080.049] (==) Automatically adding devices
    [  1080.049] (==) Automatically enabling devices
    [  1080.049] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [  1080.049]     Entry deleted from font path.
    [  1080.049] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    [  1080.049]     Entry deleted from font path.
    [  1080.049] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    [  1080.049]     Entry deleted from font path.
    [  1080.049] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    [  1080.049]     Entry deleted from font path.
    [  1080.049] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    [  1080.049]     Entry deleted from font path.
    [  1080.049] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
    [  1080.049]     Entry deleted from font path.
    [  1080.049] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/Type1,
        built-ins
    [  1080.049] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    [  1080.049] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
    [  1080.049] (II) Loader magic: 0xb77295a0
    [  1080.049] (II) Module ABI versions:
    [  1080.049]     X.Org ANSI C Emulation: 0.4
    [  1080.049]     X.Org Video Driver: 11.0
    [  1080.049]     X.Org XInput driver : 16.0
    [  1080.049]     X.Org Server Extension : 6.0
    [  1080.050] (--) PCI:*(0:1:0:0) 1002:954f:174b:e990 rev 0, Mem @ 0xd0000000/268435456, 0xfeaf0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
    [  1080.050] (II) Open ACPI successful (/var/run/acpid.socket)
    [  1080.050] (II) LoadModule: "extmod"
    [  1080.051] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [  1080.051] (II) Module extmod: vendor="X.Org Foundation"
    [  1080.051]     compiled for 1.11.3, module version = 1.0.0
    [  1080.051]     Module class: X.Org Server Extension
    [  1080.051]     ABI class: X.Org Server Extension, version 6.0
    [  1080.051] (II) Loading extension MIT-SCREEN-SAVER
    [  1080.051] (II) Loading extension XFree86-VidModeExtension
    [  1080.051] (II) Loading extension XFree86-DGA
    [  1080.051] (II) Loading extension DPMS
    [  1080.051] (II) Loading extension XVideo
    [  1080.051] (II) Loading extension XVideo-MotionCompensation
    [  1080.051] (II) Loading extension X-Resource
    [  1080.051] (II) LoadModule: "dbe"
    [  1080.051] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [  1080.051] (II) Module dbe: vendor="X.Org Foundation"
    [  1080.051]     compiled for 1.11.3, module version = 1.0.0
    [  1080.051]     Module class: X.Org Server Extension
    [  1080.051]     ABI class: X.Org Server Extension, version 6.0
    [  1080.051] (II) Loading extension DOUBLE-BUFFER
    [  1080.051] (II) LoadModule: "glx"
    [  1080.052] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [  1080.052] (II) Module glx: vendor="X.Org Foundation"
    [  1080.052]     compiled for 1.11.3, module version = 1.0.0
    [  1080.052]     ABI class: X.Org Server Extension, version 6.0
    [  1080.052] (==) AIGLX enabled
    [  1080.052] (II) Loading extension GLX
    [  1080.052] (II) LoadModule: "record"
    [  1080.052] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [  1080.052] (II) Module record: vendor="X.Org Foundation"
    [  1080.052]     compiled for 1.11.3, module version = 1.13.0
    [  1080.053]     Module class: X.Org Server Extension
    [  1080.053]     ABI class: X.Org Server Extension, version 6.0
    [  1080.053] (II) Loading extension RECORD
    [  1080.053] (II) LoadModule: "dri"
    [  1080.053] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [  1080.053] (II) Module dri: vendor="X.Org Foundation"
    [  1080.053]     compiled for 1.11.3, module version = 1.0.0
    [  1080.053]     ABI class: X.Org Server Extension, version 6.0
    [  1080.053] (II) Loading extension XFree86-DRI
    [  1080.053] (II) LoadModule: "dri2"
    [  1080.053] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [  1080.054] (II) Module dri2: vendor="X.Org Foundation"
    [  1080.054]     compiled for 1.11.3, module version = 1.2.0
    [  1080.054]     ABI class: X.Org Server Extension, version 6.0
    [  1080.054] (II) Loading extension DRI2
    [  1080.054] (==) Matched fglrx as autoconfigured driver 0
    [  1080.054] (==) Matched ati as autoconfigured driver 1
    [  1080.054] (==) Matched vesa as autoconfigured driver 2
    [  1080.054] (==) Matched fbdev as autoconfigured driver 3
    [  1080.054] (==) Assigned the driver to the xf86ConfigLayout
    [  1080.054] (II) LoadModule: "fglrx"
    [  1080.054] (WW) Warning, couldn't open module fglrx
    [  1080.054] (II) UnloadModule: "fglrx"
    [  1080.054] (II) Unloading fglrx
    [  1080.054] (EE) Failed to load module "fglrx" (module does not exist, 0)
    [  1080.054] (II) LoadModule: "ati"
    [  1080.054] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [  1080.055] (II) Module ati: vendor="X.Org Foundation"
    [  1080.055]     compiled for 1.11.3, module version = 6.14.99
    [  1080.055]     Module class: X.Org Video Driver
    [  1080.055]     ABI class: X.Org Video Driver, version 11.0
    [  1080.055] (II) LoadModule: "radeon"
    [  1080.055] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [  1080.055] (II) Module radeon: vendor="X.Org Foundation"
    [  1080.055]     compiled for 1.11.3, module version = 6.14.99
    [  1080.055]     Module class: X.Org Video Driver
    [  1080.055]     ABI class: X.Org Video Driver, version 11.0
    [  1080.055] (II) LoadModule: "vesa"
    [  1080.055] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [  1080.055] (II) Module vesa: vendor="X.Org Foundation"
    [  1080.055]     compiled for 1.11.3, module version = 2.3.0
    [  1080.055]     Module class: X.Org Video Driver
    [  1080.055]     ABI class: X.Org Video Driver, version 11.0
    [  1080.055] (II) LoadModule: "fbdev"
    [  1080.056] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [  1080.056] (II) Module fbdev: vendor="X.Org Foundation"
    [  1080.056]     compiled for 1.11.3, module version = 0.4.2
    [  1080.056]     ABI class: X.Org Video Driver, version 11.0
    [  1080.056] (==) Matched fglrx as autoconfigured driver 0
    [  1080.056] (==) Matched ati as autoconfigured driver 1
    [  1080.056] (==) Matched vesa as autoconfigured driver 2
    [  1080.056] (==) Matched fbdev as autoconfigured driver 3
    [  1080.056] (==) Assigned the driver to the xf86ConfigLayout
    [  1080.056] (II) LoadModule: "fglrx"
    [  1080.056] (WW) Warning, couldn't open module fglrx
    [  1080.056] (II) UnloadModule: "fglrx"
    [  1080.056] (II) Unloading fglrx
    [  1080.056] (EE) Failed to load module "fglrx" (module does not exist, 0)
    [  1080.056] (II) LoadModule: "ati"
    [  1080.057] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [  1080.057] (II) Module ati: vendor="X.Org Foundation"
    [  1080.057]     compiled for 1.11.3, module version = 6.14.99
    [  1080.057]     Module class: X.Org Video Driver
    [  1080.057]     ABI class: X.Org Video Driver, version 11.0
    [  1080.057] (II) LoadModule: "vesa"
    [  1080.057] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [  1080.057] (II) Module vesa: vendor="X.Org Foundation"
    [  1080.057]     compiled for 1.11.3, module version = 2.3.0
    [  1080.057]     Module class: X.Org Video Driver
    [  1080.057]     ABI class: X.Org Video Driver, version 11.0
    [  1080.057] (II) UnloadModule: "vesa"
    [  1080.057] (II) Unloading vesa
    [  1080.057] (II) Failed to load module "vesa" (already loaded, 0)
    [  1080.057] (II) LoadModule: "fbdev"
    [  1080.057] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [  1080.057] (II) Module fbdev: vendor="X.Org Foundation"
    [  1080.057]     compiled for 1.11.3, module version = 0.4.2
    [  1080.057]     ABI class: X.Org Video Driver, version 11.0
    [  1080.057] (II) UnloadModule: "fbdev"
    [  1080.057] (II) Unloading fbdev
    [  1080.057] (II) Failed to load module "fbdev" (already loaded, 0)
    [  1080.057] (II) RADEON: Driver for ATI Radeon chipsets:
        ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
        ATI Radeon Mobility X300 (M24) 3152 (PCIE),
        ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
        ATI Radeon X600 (RV380) 3E50 (PCIE),
        ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
        ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
        ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
        ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
        ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
        ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
        ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
        ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
        ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
        ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
        ATI Radeon IGP330M/340M/350M (U2) 4337,
        ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
        ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
        ATI Radeon X800PRO (R420) JI (AGP),
        ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
        ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
        ATI Radeon Mobility 9800 (M18) JN (AGP),
        ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
        ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
        ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
        ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
        ATI Radeon Mobility M7 LW (AGP),
        ATI Mobility FireGL 7800 M7 LX (AGP),
        ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
        ATI FireGL Mobility 9000 (M9) Ld (AGP),
        ATI Radeon Mobility 9000 (M9) Lf (AGP),
        ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
        ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
        ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
        ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
        ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
        ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
        ATI Radeon Mobility 9600 (M10) NQ (AGP),
        ATI Radeon Mobility 9600 (M11) NR (AGP),
        ATI Radeon Mobility 9600 (M10) NS (AGP),
        ATI FireGL Mobility T2 (M10) NT (AGP),
        ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
        ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
        ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
        ATI Radeon Mobility X300 (M22) 5460 (PCIE),
        ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
        ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
        ATI Radeon X800PRO (R423) UI (PCIE),
        ATI Radeon X800LE (R423) UJ (PCIE),
        ATI Radeon X800SE (R423) UK (PCIE),
        ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
        ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
        ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
        ATI FireGL unknown (R423) UR (PCIE),
        ATI FireGL unknown (R423) UT (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility Radeon X700 XL (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
        ATI Radeon Mobility 9100 IGP (U3) 5835,
        ATI Radeon XPRESS 200 5954 (PCIE),
        ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
        ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
        ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
        ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
        ATI Radeon XPRESS 200M 5975 (PCIE),
        ATI Radeon XPRESS 200 5A41 (PCIE),
        ATI Radeon XPRESS 200M 5A42 (PCIE),
        ATI Radeon XPRESS 200 5A61 (PCIE),
        ATI Radeon XPRESS 200M 5A62 (PCIE),
        ATI Radeon X300 (RV370) 5B60 (PCIE),
        ATI Radeon X600 (RV370) 5B62 (PCIE),
        ATI Radeon X550 (RV370) 5B63 (PCIE),
        ATI FireGL V3100 (RV370) 5B64 (PCIE),
        ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
        ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
        ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
        ATI Mobility Radeon X800 XT (M28) (PCIE),
        ATI Mobility FireGL V5100 (M28) (PCIE),
        ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
        ATI Radeon X850 XT PE (R480) (PCIE),
        ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
        ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
        ATI Radeon X850 XT (R480) (PCIE),
        ATI Radeon X800XT (R423) 5D57 (PCIE),
        ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
        ATI Radeon X700 PRO (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
        ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
        ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
        ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
        ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
        ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
        ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
        ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
        ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
        ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
        ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
        ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
        ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
        ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
        ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
        ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
        ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
        ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
        ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
        ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
        ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
        ATI Mobility Radeon X1700, ATI Radeon X2300HD,
        ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
        ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
        ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
        ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
        ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
        ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
        ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
        ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
        ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
        ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
        ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
        ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
        ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
        ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
        ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
        ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
        AMD FireStream 9250, ATI FirePro V8700 (FireGL),
        ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
        ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
        ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
        ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
        ATI Mobility Radeon HD 4670, ATI FirePro M5750,
        ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
        ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
        ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
        ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
        ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
        ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
        ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
        ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
        ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
        ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
        ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
        ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
        ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
        ATI Mobility Radeon HD 3850 X2, ATI RV670,
        ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
        ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
        ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
        ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
        ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
        ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
        ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
        ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
        ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
        ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
        ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
        ATI FireGL V3600, ATI Radeon HD 2600 LE,
        ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
        ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
        ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
        ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
        ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
        ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
        ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
        ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
        ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
        ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
        SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
        ATI Radeon 4100, ATI Mobility Radeon HD 4200,
        ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
        AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
        AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
        AMD Radeon HD 6300 Series Graphics,
        AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
        AMD Firestream 9350, ATI Radeon HD 5800 Series,
        ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
        ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
        ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
        ATI Mobility Radeon HD 5800 Series,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
        ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
        ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
        ATI Mobility Radeon HD 5000 Series,
        ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
        ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
        ATI Mobility Radeon HD 5000 Series,
        ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
        ATI Mobility Radeon Graphics, CEDAR,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
        ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
        CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
        AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
        CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
        BARTS, BARTS, Mobility Radeon HD 6000 Series,
        Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
        AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
        AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
        TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
        TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
        CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
        CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS
    [  1080.062] (II) VESA: driver for VESA chipsets: vesa
    [  1080.062] (II) FBDEV: driver for framebuffer: fbdev
    [  1080.062] (++) using VT number 7
    
    [  1080.062] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [  1080.062] (II) [KMS] Kernel modesetting enabled.
    [  1080.062] (WW) Falling back to old probe method for vesa
    [  1080.062] (WW) Falling back to old probe method for fbdev
    [  1080.062] (II) Loading sub module "fbdevhw"
    [  1080.062] (II) LoadModule: "fbdevhw"
    [  1080.062] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [  1080.062] (II) Module fbdevhw: vendor="X.Org Foundation"
    [  1080.062]     compiled for 1.11.3, module version = 0.0.2
    [  1080.062]     ABI class: X.Org Video Driver, version 11.0
    [  1080.062] (II) RADEON(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
    [  1080.062] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [  1080.062] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [  1080.062] (==) RADEON(0): Default visual is TrueColor
    [  1080.062] (==) RADEON(0): RGB weight 888
    [  1080.062] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [  1080.062] (--) RADEON(0): Chipset: "ATI Radeon HD 4350" (ChipID = 0x954f)
    [  1080.062] (II) RADEON(0): PCIE card detected
    [  1080.062] drmOpenDevice: node name is /dev/dri/card0
    [  1080.062] drmOpenDevice: open result is 9, (OK)
    [  1080.062] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [  1080.062] drmOpenDevice: node name is /dev/dri/card0
    [  1080.062] drmOpenDevice: open result is 9, (OK)
    [  1080.062] drmOpenByBusid: drmOpenMinor returns 9
    [  1080.062] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [  1080.062] (II) Loading sub module "exa"
    [  1080.063] (II) LoadModule: "exa"
    [  1080.063] (II) Loading /usr/lib/xorg/modules/libexa.so
    [  1080.063] (II) Module exa: vendor="X.Org Foundation"
    [  1080.063]     compiled for 1.11.3, module version = 2.5.0
    [  1080.063]     ABI class: X.Org Video Driver, version 11.0
    [  1080.063] (II) RADEON(0): KMS Color Tiling: enabled
    [  1080.063] (II) RADEON(0): KMS Pageflipping: enabled
    [  1080.063] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [  1080.088] (II) RADEON(0): Output VGA-0 has no monitor section
    [  1080.092] (II) RADEON(0): Output HDMI-0 has no monitor section
    [  1080.148] (II) RADEON(0): Output DVI-0 has no monitor section
    [  1080.172] (II) RADEON(0): EDID for output VGA-0
    [  1080.176] (II) RADEON(0): EDID for output HDMI-0
    [  1080.232] (II) RADEON(0): EDID for output DVI-0
    [  1080.232] (II) RADEON(0): Manufacturer: DEL  Model: a00a  Serial#: 1111576887
    [  1080.232] (II) RADEON(0): Year: 2004  Week: 2
    [  1080.232] (II) RADEON(0): EDID Version: 1.3
    [  1080.232] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
    [  1080.232] (II) RADEON(0): Sync:  Separate
    [  1080.232] (II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 27
    [  1080.232] (II) RADEON(0): Gamma: 2.20
    [  1080.232] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [  1080.232] (II) RADEON(0): First detailed timing is preferred mode
    [  1080.232] (II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.610
    [  1080.232] (II) RADEON(0): blueX: 0.140 blueY: 0.070   whiteX: 0.310 whiteY: 0.330
    [  1080.232] (II) RADEON(0): Supported established timings:
    [  1080.232] (II) RADEON(0): 720x400@70Hz
    [  1080.232] (II) RADEON(0): 640x480@60Hz
    [  1080.232] (II) RADEON(0): 640x480@75Hz
    [  1080.232] (II) RADEON(0): 800x600@60Hz
    [  1080.232] (II) RADEON(0): 800x600@75Hz
    [  1080.232] (II) RADEON(0): 1024x768@60Hz
    [  1080.232] (II) RADEON(0): 1024x768@75Hz
    [  1080.232] (II) RADEON(0): 1280x1024@75Hz
    [  1080.232] (II) RADEON(0): Manufacturer's mask: 0
    [  1080.232] (II) RADEON(0): Supported standard timings:
    [  1080.232] (II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
    [  1080.232] (II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
    [  1080.232] (II) RADEON(0): Supported detailed timing:
    [  1080.232] (II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
    [  1080.232] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
    [  1080.232] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
    [  1080.232] (II) RADEON(0): Serial No: P144641ABAQ7
    [  1080.232] (II) RADEON(0): Monitor name: DELL E172FP
    [  1080.232] (II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
    [  1080.232] (II) RADEON(0): EDID (in hex):
    [  1080.232] (II) RADEON(0):     00ffffffffffff0010ac0aa037514142
    [  1080.232] (II) RADEON(0):     020e010368221b78eac5c6a3574a9c23
    [  1080.232] (II) RADEON(0):     124f54a54b00714f8180010101010101
    [  1080.232] (II) RADEON(0):     010101010101302a009851002a403070
    [  1080.232] (II) RADEON(0):     1300520e1100001e000000ff00503134
    [  1080.232] (II) RADEON(0):     3436343141424151370a000000fc0044
    [  1080.232] (II) RADEON(0):     454c4c204531373246500a20000000fd
    [  1080.232] (II) RADEON(0):     00384c1f500e000a202020202020000e
    [  1080.232] (II) RADEON(0): Printing probed modes for output DVI-0
    [  1080.232] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [  1080.232] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [  1080.232] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    [  1080.232] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
    [  1080.232] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [  1080.232] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    [  1080.233] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    [  1080.233] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [  1080.233] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [  1080.233] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    [  1080.233] (II) RADEON(0): Output VGA-0 disconnected
    [  1080.233] (II) RADEON(0): Output HDMI-0 disconnected
    [  1080.233] (II) RADEON(0): Output DVI-0 connected
    [  1080.233] (II) RADEON(0): Using exact sizes for initial modes
    [  1080.233] (II) RADEON(0): Output DVI-0 using initial mode 1280x1024
    [  1080.233] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [  1080.233] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fac0000
    [  1080.233] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [  1080.233] (==) RADEON(0): DPI set to (96, 96)
    [  1080.233] (II) Loading sub module "fb"
    [  1080.233] (II) LoadModule: "fb"
    [  1080.233] (II) Loading /usr/lib/xorg/modules/libfb.so
    [  1080.233] (II) Module fb: vendor="X.Org Foundation"
    [  1080.233]     compiled for 1.11.3, module version = 1.0.0
    [  1080.233]     ABI class: X.Org ANSI C Emulation, version 0.4
    [  1080.233] (II) Loading sub module "ramdac"
    [  1080.233] (II) LoadModule: "ramdac"
    [  1080.233] (II) Module "ramdac" already built-in
    [  1080.233] (II) UnloadModule: "vesa"
    [  1080.233] (II) Unloading vesa
    [  1080.233] (II) UnloadModule: "fbdev"
    [  1080.233] (II) Unloading fbdev
    [  1080.233] (II) UnloadModule: "fbdevhw"
    [  1080.233] (II) Unloading fbdevhw
    [  1080.233] (--) Depth 24 pixmap format is 32 bpp
    [  1080.233] (II) RADEON(0): [DRI2] Setup complete
    [  1080.233] (II) RADEON(0): [DRI2]   DRI driver: r600
    [  1080.233] (II) RADEON(0): [DRI2]   VDPAU driver: r600
    [  1080.233] (II) RADEON(0): Front buffer size: 5120K
    [  1080.233] (II) RADEON(0): VRAM usage limit set to 226483K
    [  1080.233] (==) RADEON(0): Backing store disabled
    [  1080.233] (II) RADEON(0): Direct rendering enabled
    [  1080.233] (II) RADEON(0): Setting EXA maxPitchBytes
    [  1080.233] (II) EXA(0): Driver allocated offscreen pixmaps
    [  1080.233] (II) EXA(0): Driver registered support for the following operations:
    [  1080.233] (II)         Solid
    [  1080.234] (II)         Copy
    [  1080.234] (II)         Composite (RENDER acceleration)
    [  1080.234] (II)         UploadToScreen
    [  1080.234] (II)         DownloadFromScreen
    [  1080.234] (II) RADEON(0): Acceleration enabled
    [  1080.234] (==) RADEON(0): DPMS enabled
    [  1080.234] (==) RADEON(0): Silken mouse enabled
    [  1080.234] (II) RADEON(0): Set up textured video
    [  1080.234] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [  1080.234] (II) RADEON(0): [XvMC] Extension initialized.
    [  1080.234] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [  1080.234] (--) RandR disabled
    [  1080.234] (II) Initializing built-in extension Generic Event Extension
    [  1080.234] (II) Initializing built-in extension SHAPE
    [  1080.234] (II) Initializing built-in extension MIT-SHM
    [  1080.234] (II) Initializing built-in extension XInputExtension
    [  1080.234] (II) Initializing built-in extension XTEST
    [  1080.234] (II) Initializing built-in extension BIG-REQUESTS
    [  1080.234] (II) Initializing built-in extension SYNC
    [  1080.234] (II) Initializing built-in extension XKEYBOARD
    [  1080.234] (II) Initializing built-in extension XC-MISC
    [  1080.234] (II) Initializing built-in extension SECURITY
    [  1080.234] (II) Initializing built-in extension XINERAMA
    [  1080.234] (II) Initializing built-in extension XFIXES
    [  1080.234] (II) Initializing built-in extension RENDER
    [  1080.234] (II) Initializing built-in extension RANDR
    [  1080.234] (II) Initializing built-in extension COMPOSITE
    [  1080.234] (II) Initializing built-in extension DAMAGE
    [  1080.253] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [  1080.253] (II) AIGLX: enabled GLX_INTEL_swap_event
    [  1080.253] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [  1080.253] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [  1080.253] (II) AIGLX: Loaded and initialized r600
    [  1080.253] (II) GLX: Initialized DRI2 GL provider for screen 0
    [  1080.254] (II) RADEON(0): Setting screen physical size to 338 x 270
    [  1080.262] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
    [  1080.265] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [  1080.265] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [  1080.265] (II) LoadModule: "evdev"
    [  1080.266] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [  1080.266] (II) Module evdev: vendor="X.Org Foundation"
    [  1080.266]     compiled for 1.11.3, module version = 2.7.0
    [  1080.266]     Module class: X.Org XInput Driver
    [  1080.266]     ABI class: X.Org XInput driver, version 16.0
    [  1080.266] (II) Using input driver 'evdev' for 'Power Button'
    [  1080.266] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [  1080.266] (**) Power Button: always reports core events
    [  1080.266] (**) evdev: Power Button: Device: "/dev/input/event1"
    [  1080.266] (--) evdev: Power Button: Vendor 0 Product 0x1
    [  1080.266] (--) evdev: Power Button: Found keys
    [  1080.266] (II) evdev: Power Button: Configuring as keyboard
    [  1080.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [  1080.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [  1080.266] (**) Option "xkb_rules" "evdev"
    [  1080.266] (**) Option "xkb_model" "pc105"
    [  1080.266] (**) Option "xkb_layout" "es"
    [  1080.268] (II) XKB: reuse xkmfile /var/lib/xkb/server-FFBD4FDC8093CCB415CD73029FDA64F4B077A3E7.xkm
    [  1080.269] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [  1080.269] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [  1080.269] (II) Using input driver 'evdev' for 'Power Button'
    [  1080.269] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [  1080.269] (**) Power Button: always reports core events
    [  1080.269] (**) evdev: Power Button: Device: "/dev/input/event0"
    [  1080.269] (--) evdev: Power Button: Vendor 0 Product 0x1
    [  1080.269] (--) evdev: Power Button: Found keys
    [  1080.269] (II) evdev: Power Button: Configuring as keyboard
    [  1080.269] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [  1080.269] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [  1080.269] (**) Option "xkb_rules" "evdev"
    [  1080.269] (**) Option "xkb_model" "pc105"
    [  1080.269] (**) Option "xkb_layout" "es"
    [  1080.270] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event11)
    [  1080.270] (II) No input driver specified, ignoring this device.
    [  1080.270] (II) This device may have been added with another device file.
    [  1080.270] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
    [  1080.270] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [  1080.270] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [  1080.270] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [  1080.270] (**) Logitech USB Receiver: always reports core events
    [  1080.270] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
    [  1080.270] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51b
    [  1080.270] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
    [  1080.270] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [  1080.270] (--) evdev: Logitech USB Receiver: Found relative axes
    [  1080.270] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [  1080.270] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [  1080.270] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [  1080.270] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [  1080.270] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [  1080.270] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3/event3"
    [  1080.270] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
    [  1080.270] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [  1080.271] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [  1080.271] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [  1080.271] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [  1080.271] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [  1080.271] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [  1080.271] (II) No input driver specified, ignoring this device.
    [  1080.271] (II) This device may have been added with another device file.
    [  1080.271] (II) config/udev: Adding input device HDA Intel Line-Out Front (/dev/input/event10)
    [  1080.271] (II) No input driver specified, ignoring this device.
    [  1080.271] (II) This device may have been added with another device file.
    [  1080.271] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event4)
    [  1080.271] (II) No input driver specified, ignoring this device.
    [  1080.271] (II) This device may have been added with another device file.
    [  1080.272] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event5)
    [  1080.272] (II) No input driver specified, ignoring this device.
    [  1080.272] (II) This device may have been added with another device file.
    [  1080.272] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event6)
    [  1080.272] (II) No input driver specified, ignoring this device.
    [  1080.272] (II) This device may have been added with another device file.
    [  1080.272] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7)
    [  1080.272] (II) No input driver specified, ignoring this device.
    [  1080.272] (II) This device may have been added with another device file.
    [  1080.273] (II) config/udev: Adding input device HDA Intel Line-Out CLFE (/dev/input/event8)
    [  1080.273] (II) No input driver specified, ignoring this device.
    [  1080.273] (II) This device may have been added with another device file.
    [  1080.273] (II) config/udev: Adding input device HDA Intel Line-Out Surround (/dev/input/event9)
    [  1080.273] (II) No input driver specified, ignoring this device.
    [  1080.273] (II) This device may have been added with another device file.
    [  1080.273] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
    [  1080.273] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [  1080.273] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [  1080.273] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [  1080.273] (**) AT Translated Set 2 keyboard: always reports core events
    [  1080.273] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
    [  1080.273] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [  1080.273] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [  1080.273] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [  1080.273] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
    [  1080.273] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [  1080.273] (**) Option "xkb_rules" "evdev"
    [  1080.273] (**) Option "xkb_model" "pc105"
    [  1080.273] (**) Option "xkb_layout" "es"
    [  1080.376] (II) evdev: Power Button: Close
    [  1080.376] (II) UnloadModule: "evdev"
    [  1080.376] (II) Unloading evdev
    [  1080.436] (II) evdev: Power Button: Close
    [  1080.436] (II) UnloadModule: "evdev"
    [  1080.436] (II) Unloading evdev
    [  1080.445] (II) evdev: Logitech USB Receiver: Close
    [  1080.445] (II) UnloadModule: "evdev"
    [  1080.445] (II) Unloading evdev
    [  1080.448] (II) evdev: AT Translated Set 2 keyboard: Close
    [  1080.448] (II) UnloadModule: "evdev"
    [  1080.448] (II) Unloading evdev
    [  1080.454]  ddxSigGiveUp: Closing log
    [  1080.454] Server terminated successfully (0). Closing log file.
    Thanks so much for any help!

    Last edited by vallvi; October 21st, 2012 at 07:36 AM.

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •